How to setup date and timestmp

Hi,
I have loaded table with date with the format: YYYY-mm-dd and timestmp with format: yyyy-mm-dd hh24:mi:s.ffff. But i i look the data in OWB i will get th format: dd-Mon-yy (like 12-JUL-08) and timestamp: 12-JUL-08 10.23.48.00000. How can i put he dat and TS which i wanted to have. Is there ny thing i can do.
Thanks in advance

Hi
When viewing the data via OWB, there is no way just now to set the display date format for presentation....the data is of course fine in the server.
Cheers
David

Similar Messages

How to setup Data guard for SAP database?

Can someone please tell me how to setup data guard for SAP databases?
Thanks,
Abhi

Hi Abhi,
have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
14
Oracle Data Guard
You can use "Physical Standby".
You cannot use "Logical Standby".
You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
You can use Data Guard Broker.
You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
Maximum Protection causes the primary database to terminate if problems occur in the standby database.
And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
regards
Kay

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS

How to compare date and time together

Hi,
How to compare Date and Time together?
For example in a database table there are two fields rundate and runtime. I want to compare these two with perticular date and time in the program. Like, I want to pull all the records where the records's date and time are less than a perticular date and time in the program.
Hope the question is clear...
Thanks.
Kavita

Hi Kavita
There is no as such Date and Time Comparision FM in Standard SAP But You can define your own like this
<b>FUNCTION ZAV4_COMPAREDATETIME.
""Lokale Schnittstelle:
*" IMPORTING
*"     REFERENCE(DATE1) TYPE DATS
*"     REFERENCE(TIME1) TYPE TIMS
*"     REFERENCE(DATE2) TYPE DATS
*"     REFERENCE(TIME2) TYPE TIMS
*" EXPORTING
*"     VALUE(TWOISMORETOPICAL) TYPE C
twoismoretopical = ''.
if date2 > date1.
    twoismoretopical = 'X'.
else.
     if date2 = date1 and time2 > time1.
       twoismoretopical = 'X'.
     endif.
endif.
ENDFUNCTION.</b>
Regards
Mithlesh

How describe model data and get select in DB throw topLink.

Hello,
I have table from code
create table t_tree
id int primary key,
parent_id int,
value varchar2(255)
Alter table t_tree
add constraint constr_id_parent foreign key (parent_id) references t_tree (id)
I must get query
select level as lv,lpad('-@-', (level-1)*2)||value as MMM, t.* from t_tree t
connect by prior id=parent_id
start with T.PARENT_ID is null
How describe model data and get select in DB throw topLink.
Dema.

So you'll probably have to write a function which uses dynamic SQL to retrieve the desired message text, like this untested one:
CREATE OR REPLACE FUNCTION get_msg(p_db IN VARCHAR2,
                                   p_id IN NUMBER)
   RETURN VARCHAR2
IS
   msg_txt VARCHAR2(4000);
BEGIN
   -- make sure p_db is a valid database link ...
   EXECUTE IMMEDIATE 'SELECT d_msg FROM msg@' || p_db || ' WHERE t_id = :id' INTO msg_txt USING p_id;
   RETURN msg_txt;
EXCEPTION
   WHEN NO_DATA_FOUND THEN
      RETURN NULL;
END get_msg;
/The you can update likeUPDATE mex
   SET t_msg = get_msg(db_id, t_id);Hth, Urs

How to display date and time on jsf page

Hi,
how to display date and time on jsf page
we are using 11.2.0.0 jdeveloper on windows.
thanks
Edited by: user12187801 on 26-Jul-2012 01:42

Your question is certainly lacking some information.
If you want a constantly updating date/time - then JavaScript is your best bet, and Google would find you examples like [url http://www.webestools.com/scripts_tutorials-code-source-7-display-date-and-time-in-javascript-real-time-clock-javascript-date-time.html]this
If you meant something else, then it's back to you to explain.

How to set date and time on apple tv

how to set date and time on apple tv

Assuming this is not the first time you have used your Apple TV
    1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    2.    Also try restarting the router.
    3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

How to find date and time on photo taken by iphone?, How to find date and time on photo taken by iphone?

How to find date and time on iphone's photo taken?

in iPhoto no matter the source of the photo you see the information about th ephoto by selecting the photo and showing info (the get info button may be in a different location depending on the version of iPhoto you have)
If you are not aking an iPhoto question but are asking an iPhone question instead then repost in the iPhone forum - iPhoto has no association with the iPhone
LN

How to Extract data and reports from the SAP BW warehouse

Hi to All Guru's
I am new to SAP BW. Can any one help me to know, How to Extract data and reports from SAP BW. Do we use any tools. After Extracting the data from SAP BW how can we move all the data to Cognos. It would be kind enough to provide me with any documentation or links. Step by step procedure would be very much helpfull to me.
Thanks
Venu

Hi Voodi
Thanks for the quick response. I think Open hub is to extract the data from SAP BW, but what about sending this data into Cognos. Can you please let me know in detail regarding answer. If possible send me any documentation or links regarding this. Thanks for your concern.
Venu

How Adobe gets DATE and its format?

Hello,
I am getting current (todays) date by using below JS in some flds, and by using below FormCalc for some flds into my_form,
JS:
var currentTime = new Date()
Form Calc:
$.rawValue = num2date(date(), DateFmt(MM/DD/YYYY))
But, i dont have much idea that how adobe is getting this date? For my company this is the very first form, hence they are asking me how adobe gets date and its format whether,
1) From local IP/Interner provider address's date, format?
2) or user PC/laptop's LOCAL settings date, format? if so, for example, if Germany user (Laptop settings) has a DD.MM.YYYY configured, if this user comes to US on a busines trip and if that user opens the form, then how the date looks like for this user? as per user laptop settings DD.MM.YYYY or local internat provider date format MM//DD//YYYY?
Thank you

Hi,
the date() function returns the number of days since 01.01.1900 for the local date of the current system (related to the system clock of the OS).
If you travel from Germany to the US but don't update your date/time settings, then it returns the same date in the US as in Germany.
You can check the behavior by changing your local date/time setting or the timezones.

Setup date and timer on a flash banner

anoyone please help me to setup the date and time on a flash
banner. if it does need action script please provide me with code
thanks.

kicon wrote:
>
anyone please help me out how to setup the date and
timer on a flash. i tould be appreciate with this.
a bit too general, what kind of timer ?
Regards
Urami
Happy New Year guys - all the best there is in the 2006
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

Envy 5660 - how to change date and time

During installation I thought I had selected the correct date and time. That didn't happen. After installation is completed how can I make these changes?
This question was solved.
View Solution.

Hey @Americanpioneer,
Welcome to the HP Support Forums!
I understand that you would like assistance setting the date and time on your HP ENVY 5660 e-All-in-One Printer. I would like to assist you today with properly configuring these two settings. Please follow the steps below to configure your date and time.
With the printer powered on, use your finger to scroll to the left on the touchscreen (like a cellphone) and you will see Setup
Touch Setup to access the Setup menu
Next, touch Preferences
Under Preferences you will now see Date & Time
Touch Date to change the date on your printer
Touch Time to change the time on your printer
Please let me know if these steps resolve your issue. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

How to Exchange Data and Events between LabVIEW Executables

I am having some trouble determining how to design multiple programs that can exchange data or events between each other when compiled into separate executables. I will layout the design scenario:
I have two VIs, one called Status and the other Graph. The Status VI displays the serial number and status of each DUT being tested (>50 devices). The Status VI has one timed loop along with a while loop that contains an event structure. If the user clicks on the DUT Status Cluster the event structure needs to pass the serial number to the Graph VI. The Graph VI when called fetches the records for the DUT based on the Serial Number and time frame. This VI is a producer/consumer so the user can change the time frame of the records to display onto the front panel graph.
I have a couple reasons the VIs need to be separated into independent applications. One being the underlying database fetches tends to slow the threads down between the two VIs; the other is that they may be distributed into separate systems (don't consider this in the design criteria).
I have been researching the available methods to pass the serial number to the Graph VI. My initial idea was to us a command line argument, but this does not allow the Status VI to pass another Serial Number to the Graph once it has started (I do not want to allow the user to execute multiple Graph applications because the database query can load down the server).
Is there a program method that I can implement between the two VIs that will allow me to compile them as two executables, and allow the Status program the repeatedly send an updated serial number event to the Graphs program.
I have reviewed many methods; Pipes (oglib_pipe), Action Engine, and Shared Variable. I am not sure which method will give me the ability to use a Event driven structure to inform the Graphs program when to update the serial number. Any suggestions and tutorials or examples would be greatly appreciated.

I have used the Action Engine (aka: functional global) approach for many years and it works well. Something to think about is that if you make the event's datatype a variant the only code that will need to know the actual structure of the event will be the function that needs to respond to it. Hence, a single event can service multiple functions.
Simply create a cluster containing an enum typedef that is a list of the functions that the event will service, and a variant that will be the function event data. From anywhere in the code you can fire the event (via the functional global) by selecting the function from the enum and converting function specific data to a variant. On the receiving end the event handler uses the enum to determine the function that is to get the data and sends the variant to it. The event handler doesn't know or care what the actual event data is so you could in theory add new functions without modifying the event handler.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to capture date and userdi in the alert mail

Hi,
In the alert mail I want to capture the userid, date and time. In the container I can define these variables but I was unable to caputre the values. Iam not using any BPM scenario. Can any body help me in this regard how to capture these values. Thanks in advance.
Thanks & Regards,
Mallikarjun.M

Hi,
Iam using the correct dict type as you mentioned in the above mail. But in my mail it shows that the container elements ZDATE of type SWFXST_DATE, ZTIME of type SWFXST_TIME as not found. I hope this will be solved.
Thanks,
Mallikarjun.M

How to validate date and timestamp format? Please help!

Hi experts,
   I have a input field "receipt_date" with is of char20 type. It contains date and timestamp value like 20090429T054509.000Z
   In my ABAP code I want to validate if "receipt_date" value is in the format YYYYMMDDTHHMMSS.MMMZ. If not then display error message. How can do this validation? Is there any existing function module that does this kind of validation? Please help!
Thanks & Regards
Gopal

Hi Gopal,
Can you check whether the FM CACS_TIMESTAMP_GET_DATE is available in XApps? If yes, use this to identify a valid timestamp.
Sample code:
    CALL FUNCTION 'CACS_TIMESTAMP_GET_DATE'
      EXPORTING
        i_timestamp = lv_stamp
      IMPORTING
        e_date      = lv_datum
        e_time      = lv_time.
Hope this helps! Do let me know if you need anything else!!
Cheers,
Shailesh.
Always provide feedback for helpful answers

How to setup date and timestmp

Similar Messages

Maybe you are looking for