How to setup Events under Data sources in LBWE

Hi,
I need to know how to setup the events for Shipments data source in LBWE,i activated the data sources and extracted the data but there is no Events for Those shipments data source under application area 08.Other application areas like 11,12...those are having the events.
Why the application 08:Shipment don't have events??How can i assign the events???Can you guide me??
Thanks,

Hi,
Oh..Great Help..
May be any one can you share your ideas???
Nick in your system also don't have events for 08 Shipments??
and also i have one more question :In my client they have two clients in R/3, one for customization and another one is testing,but when i changed or activated my DS those are not effected in testing system..
How can i capture those changes into testing client??any one have any idea..as per my knowledge DS are client independent right so automatically effects those changes into another clients.but in my case it is not happening??? Thanks

Similar Messages

How do I change the Data Source? Please help

Hello Everyone,
Can anyone provide me the steps to change the extractor for a data source? Here is the situation; we have a Z data source and under data source display transaction RSA2, I see that the extraction methods is V (Transparent table or DB View) and the extractor is a Z table which we maintain in R/3 for mapping the SAP g/l accounts to Hyperion accounts. Since, we have introduced/created a new Z table in R/3 for SAP to Hyperion accounts mappings because of changes in Hyperion reporting system the BW system has no latest data/data from that is maintained in new Z table hence, it is appearing to me that once I update the data source with new Z table in the extractor will update BW with mapping information that is in the new Z table. Please let me know if I am wrong and suggest me the right way to deal with the above issue.
If updating the data source solves my problem then how do I go about doing that? Can I make the changes in R/3 production system directly or have to come through transport? Please provide me the steps to make those changes. Points will be awarded for the help.
Thanks in advance,
Kumar

Hi Ravi,
Here is what I meant for change in mapping and new mapping
1. For example R/3 account 1234 is mapped to Hyperion account ABC in old Z table and that was copied to new Z table since, we want to use that new Z table going forward but, in the new table the mapping is changed i.e., R/3 account 1234 mapped to Hyperion account XYZ
2. All new accounts created in R/3 after we started using new Z table are mapped to the Hyperion accounts only in the new Z table, meaning all the new mappings are only updated in new Z table.
Please reply.
Thanks,
Kumar

How can I manage my data sources better?

I'm learning WebLogic and my installation already has a data source configured to point to one of our eight databases. As we move through different phases of development, I need to point to a different database and changing it in WL is cumbersome. What I would like is to have all eight databases added as eight sources and enable only one at a time depending on our needs. I'd like to know:
1) How does WebLogic know which data source to use for my .ear?
2) With more than one data source, how do I ensure that only the one I want is used by my ear?
Many thanks,
TenLeftFingers

It depends a bit on what you want to do (what you mean by "manage"), but perhaps this will help:
Settings app > iCloud >
http://help.apple.com/ipad/7/#/iPad995bbafe

How can i lookup a data source v5 in WSAD 5.1?

Hi all,
I'm using WSAD 5.1 to developer a web application based on J2EE 1.3 that have a simple java classes. My application uses a data source version 5 to have access the database. I?m using service locator pattern to lookup a JNDI but it dont work properly on stand alone java classes, only on EJB components.
How can i lookup a data source version 5 from my java class on WSAD 5.1?
Can anyone help?
Thanks,

Oh I did not realize that you were talking about a stand-alone application. You cannot use the server datasources in your stand-alone application.
You can use the Oracle helper classes to construct a DataSource on the client side.
http://java.sun.com/j2se/1.4.2/docs/api/javax/sql/DataSource.html and driver specific documentation to achieve this. I will try to send a few links, if I find any.
In a stand-alone application, you can use some connection pooling mechanism on your own.
The ideal thing to do is to keep your data access in your middle tier (EJBs) and call the EJB's. This way you can reuse things in multiple client tiers and use the container provided datasource and connection pooling mechanisms.
Hope this helps.
Vijay

How to connect to different data sources in XI 3.1 UNIVERSE?

hi experts,
We are going to migrate from BO 6.5 to BO XI3.1.
and we have different data sources to extract and generate the reports using various tools like Webi,Crystal Reports, Deski etc.
1         How to connect to different data sources like SAP BI query, DB2, Oracle etc,, provide me the step by step solution.
2     We need to migrate the universes and reports from BO 6.5 to BO XI 3.1 using the Report Conversion Tool.
can we directly convert from the deski reports to Webi or do we need to migrate first through Import Wizard?
3    Scheduling the Reports through Infoview
4    Various issues and how to resolve those issues, we generally face while scheduling, and while creating the queries like for example time out errors etc..
5    BO Security
6    Universe creation with best practices and the loops,contexts,aliases etc..
please provide me the step by step solution documents and links.
thans in advance
venuscm

I would recommend to take a look at the official documentation. YOu can find this here
http://help.sap.com
NAvugate to SAP BusinessObjects->All products and the select the product you want eg. BusinessObjects ENterprise or Universe designer and the appropriate version XI 3.1. Take a look at the admin and the user guides.
Currently the Data FEderator will allow you to buid a universe that access data from various data sources. Another option is to merge queries from different universes at report level.
Regards,
Stratos

How can we create a data source on structures

Hi,
   How can we create a data source on structures.
Regs,
abdul

Abdul,
    Welcome to SDN!
    We can't create Datasource using Strcutres. We need to have base tables.
    For Function Module Extractors, we will create strctures. We will use these strctures as Extract Structures. But, we will get the data from Base tables only not from Strcutures.
Strctures won't contain data.
all the best.
Regards,
Nagesh Ganisetti.

How to create 3.x data source in bi 7

Hi Guys,
can anyone tell me<b> how to create 3.x data source(emulated) in bi 7.0 </b>
pls reply me this is urgent
ravi

Ravi,
Please do not multiply the same question several times. The answer is given in the other replica:
how to create 3.x filesystem data source(emulated) in bi 7.0

How to use .UNX as data source in design studio??

How to user .UNX as source in design studio??
I am new to design studio. Experts I need to transfer some Dashboards(Dashboards are developed using BEX query ) from Xcelsius to Design studio.
Experts need some guidance.

Hi,
I haven't worked on this, but the below links seems to helpful about your queries.
Migrating SAP Dashboards to Design Studio
Dashboard Migrator to Design Studio - Recent Webcast
Dashboard Migrator - Xcelsius | Design Studio - SAP BusinessObjects - APOS
http://events.asug.com/2013AC/Business%20Intelligence/0302%20SAP%20BusinessObjects%20Design%20Studio%20and%20Dashboards%…
Design Studio dashboard application based on a Universe as a data source - Part 1
--SumanT

Data Mining : Association Analysis - How to find the Created Data source

Hi friends ,
I had created a model for Association Analysis and I trained the model and I had maintained a Data source for the model and my question is it shows the associate data source name as "Z_RSDME_AX_DS_0002" and the Application Component as "0DM_XSEL" but when I tried to search for Data source it shows that Data source not found, how to see the created Datasource
Thanks & Regards,
Vishall
Edited by: vishall somasundaram on May 5, 2011 4:00 PM

Hi,
Go to RSA1 and click on Data Sources. Give the Source System as the client name of your BI system. It will show you all the list of the datasources under your BI client. Now under datasources in the topmost node, right-click and select replicate metadate. It will give you options to replicate your Z_RSDME_AX_DS_0002 datasource. Once replicated, just activate the datasource.
Until and unless you replicate metadata you wont be able to see your Z_RSDME_AX_DS_0002 datasource.
Hope it helped.
Thanks,
Appu

How to create the generic data source for Labour costs report in BI (actual& plan costs)?

Hello Guru's
My requirement is to get the total labour costs in BEx analyzer.So i need to create custom DS for that. But i am not sure about the FICO tables which are having the Labour info..
I'm having the GR10 report from R/3 sidepls look at the document. But i am not sure about the report, how that built,and giude me on the report.
Please help on this to going forward.

Hi,
There are COOM data source which may suits your needs.
please check data source
0CO_OM_WBS_6
0CO_OM_WBS_3
Base tables are COSP and COSS.
Check about coom data source, if not suitable then go for custom data source.
About table cross verify with your source team.
Thanks

How to create a linked data source with document libraries based on the same template?

I use SharePoint Foundation 2013, SP Designer and Visual Studio 2013 to my needs. But there are several things which i don't get.
I have a number of libraries which use the same template. I want to create a linked data source, that would contain them all, and if I add a library based on this template, the library would be added to the data sorce. Is it possible?
I tried creating linked data souces, but the view that it brings by default is limited(no sorting, etc.). How can it be modified?

I am planning to do my project on Linux with J2EE,Oracle technologies.You don't need to set up a DSN. Just use a JDBC connect string such as jdbc:oracle:thin:@localhost:1521:xe
~Jer

How do I select a data source for my webapp?

Wel, I'm obviously not looking in the right manual because this ought to be like falling off a log!
I have developed a web application in JDeveloper 10.1.3 and I'm deploying it (using a WAR file) to an OC4J container in OAS 10.1.3.
I have created a JDBC data source (JNDI location jdbc/bmra89) to connect to a 9.2.0.7 Oracle database and testing this through the interface is successful. The data source is associated with a new Connection Pool.
I ensure that a default data-sources.xml file is NOT bundled into my WAR file from JDeveloper (because the database I want to connect to from the OAS is different to the database I want to connect to from the deployed web app) so it should be looking for one it builds itself. In fact, data-sources.xml exists in the j2ee/<webapp_name>/config directory that contains the details of the data source and connection pool I created.
During deployment of the generated WAR file, I have chosen to Edit the Deployment Plan and in here I have entered the name of the data source (jdbc/bmra89) into the box labelled "defaultDataSource" and the boxes labelled "connectorsPath" and "dataSourcesPath" I've left empty.
It all deploys OK, but when I try to access a page I get the following error:
500 Internal Server Error
JBO-30003: The application pool (model.AppModuleLocal) failed to checkout an application module due to the following exception:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1954)
So, any ideas where I'm going wrong? (I have to admit to being pretty lost with all this!)
Thanks,
Andy

Let's try to do this as easy as I'm capable of explaining.
Deploy the EAR to the Application server/OC4J standalone that you're trying to configure without modifying or removing any of the files in the EAR or WAR file and using all of the defaults.
Now start up the Application server control in you choice of web browser, my URL is http://localhost:8888/em.
After logging into the console select the "Adminstration" Link, and there will be List of Administration Tasks, one of which being the JDBC Resources under, Services.
After selecting the JDBC Resources "Go to Task" you will see 2 areas, Data Sources and Connection Pools. Somewhere in all of this you should see the jdev-connection-pool-bmra89, jdev-connection-managed-bmra89, and jdev-connection-native-bmra89.
I normally modify the jdev-connection-pool-xxxxx first to use the correct URL connection. IE- jdbc:oracle:thin:@localhost:1521:bmra89 to jdbc:oracle:thin:@138.51.128.100:1521:bmra89, changing localhost to a specific database IP address.
Then I'll click the Apply, and then go back and do the same to the jdev-connection-native-bmra89.
At this point you should be able to test the connections successfully, and get the Web Service to connect.
I hope I've covered it and that this helps, and you're not being thick. The data sources part of this stuff can be confusing.
Darren

How to enhance open Item data source from R/3 ??

Hello All,
I am trying to enhance the business content extractor for open items in R/3 . The data source is 0FC_OP_01. i know this is coming from the table DFKKOP.
I need to add sub GL ffield rom another table from DFKKOPK .
Please advise the step by step to enhance the existing structure and add the new field to the extractor.
Points will be rewarded for any helpful answers.
thanks in advance,
AG..

Hi,
please check out the forums, there are lot of threads about the issue 'how to enhance a datasource'. Just to give you a hint. Use transaction rsa6 in your source system for that. Here you can enhance the extract structure, the datasource and you can do the coding...
regards
Siggi

How to prevent Pivot Table Data Source from being changed automatically?

I have an excel file that contains a Pivot Table that references a table within the workbook (Data Source = "MyTable"). When I save the file and copy it, the copy contains a reference to the original file. Instead of displaying, "MyTable",
it shows "OldFilename!MyTable" where OldFilename is the name of the original file, not the current file.
How do I prevent this from occurring. It is only doing this on my current machine, if I perform these steps on a different machine, the problem does not occur and the Data Source property stays the same as it should.
What setting(s) do I change to fix this problem?
Thank you in advance for your help!
Michael

Hi Michael,
How about the issue now, is it solved?For the 'data model' feature,please refer to:
http://blogs.office.com/2012/08/23/introduction-to-the-data-model-and-relationships-in-excel-2013/
let us know if you have any additional questions or concerns.
Best regards,
Wind

How to find active master data source in the bw system

Hi
Can anyone guide me how to find the active master data source in the bw system

Hi,
You can use the table ROOSOURCE. The field ROOSTYPE specifies the type of datasource whether Transaction or attributes or text. You could write an abap program to filter the table and give you only master data datasources.
Assign points if helpful
Regards.

How to setup Events under Data sources in LBWE

Similar Messages

Maybe you are looking for