How to show data vertical in ALV
How to show data vertical in ALV?
such as :
[http://img402.imageshack.us/img402/9978/20101230215621.png|http://img402.imageshack.us/img402/9978/20101230215621.png]
Moderator Message: Search for available information. Keywords - Dynamic Internal Table
Edited by: kishan P on Dec 30, 2010 7:35 PM
Transpose the contents of your internal table.
Original:
A 1 1 1
B 2 2 2
Transposed:
A B
1 2
1 2
1 2
Similar Messages
-
How to show check box in ALV grid??
Hi All,
I am using an option edit in the feild catalogue which allows me to change the values in a few columns in the ALV list.
What I want is to be able to show a check box in a few columns which user can check and use the value X in the program for the later processing....
Can somebody tell me how to show a check box in the ALV screen in the changeable format??
Win full point by answering this typical question..
Thanks - Chandanhi go through the fallowing code.
*& Report YGS_ALV_BOM *
REPORT YGS_ALV_BOM .
TABLES : MAST,STKO,STPO.
TYPE-POOLS: SLIS.
TYPES : BEGIN OF TY_MAST,
CHECK_BOX,
MATNR TYPE MAST-MATNR,
WERKS TYPE MAST-WERKS,
STLAN TYPE MAST-STLAN,
STLNR TYPE MAST-STLNR,
STLAL TYPE MAST-STLAL,
END OF TY_MAST.
TYPES : BEGIN OF TY_STKO,
STLTY TYPE STKO-STLTY,
STLNR TYPE STKO-STLNR,
STLAL TYPE STKO-STLAL,
STKOZ TYPE STKO-STKOZ,
BMENG TYPE STKO-BMENG,
BMEIN TYPE STKO-BMEIN,
END OF TY_STKO.
TYPES : BEGIN OF TY_STPO,
LIGHTS,
STLTY TYPE STPO-STLTY,
STLNR TYPE STPO-STLNR,
STLKN TYPE STPO-STLKN,
STPOZ TYPE STPO-STPOZ,
IDNRK TYPE STPO-IDNRK,
MENGE TYPE STPO-MENGE,
MEINS TYPE STPO-MEINS,
END OF TY_STPO.
DATA : IT_MAST TYPE TABLE OF TY_MAST,
WA_MAST TYPE TY_MAST,
IT_STKO TYPE TABLE OF TY_STKO,
WA_STKO TYPE TY_STKO,
IT_STPO TYPE TABLE OF TY_STPO,
WA_STPO TYPE TY_STPO.
DATA : lt_fieldcat TYPE slis_t_fieldcat_alv,
ls_layout TYPE slis_layout_alv,
ls_event TYPE slis_alv_event,
lt_event TYPE slis_t_event,
it_sortinfo type slis_t_sortinfo_alv,
ls_header TYPE slis_listheader,
lt_header TYPE slis_t_listHEADER.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
SELECT-OPTIONS : S_MATNR FOR MAST-MATNR.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM BUILD_FIELDCAT USING LT_FIELDCAT.
PERFORM BUILD_LAYOUT.
END-OF-SELECTION.
PERFORM DISPLAY_DATA.
*& Form GET_DATA
* text
* --> p1 text
* <-- p2 text
form GET_DATA .
REFRESH : IT_MAST.
SELECT MATNR
WERKS
STLAN
STLNR
FROM MAST
INTO CORRESPONDING FIELDS OF TABLE IT_MAST
WHERE MATNR IN S_MATNR.
endform. " GET_DATA
*& Form BUILD_FIELDCAT
* text
* --> p1 text
* <-- p2 text
form BUILD_FIELDCAT USING LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : L_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
REFRESH : LT_FIELDCAT.
L_FIELDCAT-COL_POS = 1.
L_FIELDCAT-FIELDNAME = 'MATNR'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'MATNR'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 2.
L_FIELDCAT-FIELDNAME = 'WERKS'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'WERKS'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 3.
L_FIELDCAT-FIELDNAME = 'STLNR'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'STLNR'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
endform. " BUILD_FIELDCAT
*& Form BUILD_LAYOUT
* text
* --> p1 text
* <-- p2 text
form BUILD_LAYOUT .
CLEAR LS_LAYOUT.
LS_LAYOUT-BOX_FIELDNAME = 'CHECK_BOX'.
LS_LAYOUT-BOX_TABNAME = 'IT_MAST'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_DATA
* text
* --> p1 text
* <-- p2 text
form DISPLAY_DATA .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
* I_STRUCTURE_NAME =
IS_LAYOUT = LS_LAYOUT
IT_FIELDCAT = LT_FIELDCAT
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_MAST
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " DISPLAY_DATA
FORM PF_STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'YSTATUS' OF PROGRAM SY-REPID
EXCLUDING RT_EXTAB.
ENDFORM.
FORM USER_COMMAND USING RF_UCOMM TYPE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
CASE RF_UCOMM.
WHEN '&NEXT'.
PERFORM GET_DATA_BOM .
PERFORM BUILD_FIELDCAT_BOM USING LT_FIELDCAT.
PERFORM BUILD_LAYOUT_BOM.
PERFORM DISPLAY_DATA_BOM.
ENDCASE.
ENDFORM.
*& Form GET_DATA_BOM
* text
* --> p1 text
* <-- p2 text
form GET_DATA_BOM .
CLEAR : WA_STPO,
WA_MAST.
REFRESH : IT_STPO.
DATA : IT_CHECK TYPE TABLE OF TY_MAST.
LOOP AT IT_MAST INTO WA_MAST.
IF WA_MAST-CHECK_BOX EQ 'X'.
APPEND WA_MAST TO IT_CHECK.
ENDIF.
ENDLOOP.
SELECT STLTY
STLNR
STLKN
VGKNT
IDNRK
MENGE
MEINS
FROM STPO
INTO CORRESPONDING FIELDS OF TABLE IT_STPO
FOR ALL ENTRIES IN IT_CHECK
WHERE IDNRK EQ IT_CHECK-MATNR.
CLEAR WA_STPO.
LOOP AT IT_STPO INTO WA_STPO.
SELECT SINGLE * FROM MAST WHERE MATNR EQ WA_STPO-IDNRK.
IF SY-SUBRC = 0.
WA_STPO-LIGHTS = '2'.
ELSE.
WA_STPO-LIGHTS = '1'.
ENDIF.
MODIFY IT_STPO FROM WA_STPO.
ENDLOOP.
endform. " GET_DATA_BOM
*& Form BUILD_FIELDCAT_BOM
* text
* --> p1 text
* <-- p2 text
form BUILD_FIELDCAT_BOM USING LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : L_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
REFRESH : LT_FIELDCAT.
L_FIELDCAT-COL_POS = 1.
L_FIELDCAT-FIELDNAME = 'STLTY'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLTY'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 2.
L_FIELDCAT-FIELDNAME = 'STLNR'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLNR'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 3.
L_FIELDCAT-FIELDNAME = 'STLKN'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLKN'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 4.
L_FIELDCAT-FIELDNAME = 'IDNRK'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'IDNRK'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 5.
L_FIELDCAT-FIELDNAME = 'MENGE'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'MENGE'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
endform. " BUILD_FIELDCAT_BOM
*& Form BUILD_LAYOUT_BOM
* text
* --> p1 text
*<-- p2 text
form BUILD_LAYOUT_BOM .
CLEAR : LS_LAYOUT.
LS_LAYOUT-LIGHTS_FIELDNAME = 'LIGHTS'.
LS_LAYOUT-LIGHTS_TABNAME = 'IT_STPO'.
endform. " BUILD_LAYOUT_BOM
*& Form DISPLAY_DATA_BOM
* text
* --> p1 text
* <-- p2 text
form DISPLAY_DATA_BOM .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
* I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND_BOM'
I_CALLBACK_TOP_OF_PAGE = 'TOP9'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
I_BACKGROUND_ID = 'ALV_BACKGROUND'
* I_GRID_TITLE =
* I_GRID_SETTINGS =
IS_LAYOUT = LS_LAYOUT
IT_FIELDCAT = LT_FIELDCAT
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* I_HTML_HEIGHT_TOP =
* I_HTML_HEIGHT_END =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_STPO
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " DISPLAY_DATA_BOM
FORM TOP9 .
CLEAR LS_HEADER.
REFRESH LT_HEADER.
LS_HEADER-TYP = 'H'.
LS_HEADER-INFO = 'BILL OF MATERIALS'.
APPEND LS_HEADER TO LT_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = LT_HEADER
I_LOGO = 'ENJOYSAP_LOGO'
* I_END_OF_LIST_GRID =
ENDFORM.
FORM USER_COMMAND_BOM USING RF_UCOMM_BOM LIKE SY-UCOMM
SEL_FIELD TYPE SLIS_SELFIELD.
CASE RF_UCOMM_BOM.
WHEN '&IC1'.
SET PARAMETER ID 'MAT' FIELD WA_STPO-IDNRK.
SET PARAMETER ID 'WRK' FIELD WA_MAST-WERKS.
SET PARAMETER ID 'CSA' FIELD WA_MAST-STLAN.
CALL TRANSACTION 'CS03' AND SKIP FIRST SCREEN.
ENDCASE. -
How to show data in table on the basis of click on a row of another table
Hi All,
I want to show two tables. In first table the main objects show in turn there is another collection in that main object for which i want to show data in separate table.
e.g.,
ObjectA
have the collection of ObjectBs
when i select ObjectA in main table then all the collection Objects of ObjectBs shows in separate table. Plz help me how to handle this case ??hi,
You can create two value nodes for storing these collections. The first one would be singleton node as it is the main list. Under that create the second node with singleton = false.
e.g.
---NodeA
--attrA1
--attrA2
--NodeB(singleton = false)
--attrB1
--attrB2
Now populate collection of object A in NodeA and after adding element in NodeA populate respective elements in NodeB.
IPrivate<View>View.INodeANode nodeA = wdContext.NodeAnode();
for (Iterator it = collectionA.iterator(); it.hasNext(); )
ObjectA objA= it.next();
IPrivate<View>View.INodeAElement nodeAElem= nodeA.createNodeAElement();
wdCopyservice.copy Corresponding(objA,nodeAElem);
nodeA.addElement(nodeAElem);
Collection collectioB =objA.getCollectionB();
for (Iterator it1 = collectionB.iterator(); it1.hasNext(); )
ObjectB objB= it1.next();
IPrivate<View>View.INodeBNode nodeB = nodeAElem.nodeBnode();
IPrivate<View>View.INodeAElement nodeBElem= nodeB.createNodeBElement();
wdCopyservice.copy Corresponding(objB,nodeBElem);
nodeB.addElement(nodeBElem);
Bind NodeA to the first table and NodeB to second one.
After that when you select record in first table automatically its corresponding records will be populated in second table.
Hope this helps!
Monalisa -
How to show Date and Time with TimeZone
Dear All,
I have to show Date and Time with TimeZone abbreviation,
for example:
1) 31 March 2011 2:30 in india standard time - it should show in screen 31 March 2011 2:30 IST.
2) 31 March 2011 2:30 in Australia/New Zealand - Eastern time zone it should show in screen 31 March 2011 2:30 AEST.
how can i show *Australia/New Zealand - Eastern time zone to AEST*,
I tried with format DD MMM YYYY HH:MM zzz, and i looked time zone API too.
Appreciate your help
Thanks
DayaDayananda wrote:
ok, than i have to use zzzz format, as z won't help in my case, so i have to use zzzz which display descriptive value like, Indian Standard Time i.e. ISTPer the javadocs there is a very specific reason why that is a problem especially if you intend to support many timezones in one application.
"+For compatibility with JDK 1.1.x, some other three-letter time zone IDs (such as "PST", "CTT", "AST") are also supported. However, their use is deprecated because the same abbreviation is often used for multiple time zones (for example, "CST" could be U.S. "Central Standard Time" and "China Standard Time"), and the Java platform can then only recognize one of them+."
Thus you have one single case where there can be many and moreover it can change (twice a year I believe.)
There is a standard source for this information although when I tried it it appears to not work.
If the app only needs to display one zone then provide a configuration value that allows a user to overload the display value.
If the app needs to display many values then you MUST inform business users of the problem because there are duplicates and they, not you, need to decide specifically what happens in those cases. -
How to display date field in ALV in format 'YYYY-MM-DD'?
Hi experts,
I am not getting displayed the date field in ALV in the format 'YYYY-MM-DD' if it is different than my user setting's format (DD.MM.YYYY).
Tried with the edit mask
LVC_S_FCAT-EDIT_MASK = '____-__-__' but it does not work.
I could not find the conversion routine for this. Is it possible to write customer conversion routine?
I have to use DATE field, otherwise if I display this format in CHAR10 field , sorting in ALV does not work for this field.
PLEASE ANY HELP!
Kind regards,
DanijelaHi,
Use FM FORMAT_DATE_4_OUTPUT.
TYPE-POOLS : slis, KKBLO.
TYPES: BEGIN OF t_data,
sel TYPE char1,
matnr TYPE matnr,
bldat type char10,
END OF t_data.
DATA: it_tab TYPE STANDARD TABLE OF t_data,
it_fcat TYPE slis_t_fieldcat_alv.
DATA: wa_tab TYPE t_data,
wa_fcat TYPE slis_fieldcat_alv,
wa_layout type SLIS_LAYOUT_ALV.
data: lv_repid TYPE syrepid.
data : lv_date type NLEI-IBGDT,
lv_outdate type RN1DATUM-DATEX,
lv_format type RN1DATUM-FORMAT value 'YYYY-MM-DD'.
lv_repid = sy-repid.
lv_date = sy-datum.
CALL FUNCTION 'FORMAT_DATE_4_OUTPUT'
EXPORTING
datin = lv_date
format = lv_format
IMPORTING
DATEX = lv_outdate.
move lv_outdate to wa_tab-bldat.
wa_tab-matnr = '0000001'.
APPEND wa_tab TO it_tab.
lv_date = sy-datum + 1.
CALL FUNCTION 'FORMAT_DATE_4_OUTPUT'
EXPORTING
datin = lv_date
format = lv_format
IMPORTING
DATEX = lv_outdate.
move lv_outdate to wa_tab-bldat.
wa_tab-matnr = '0000002'.
APPEND wa_tab TO it_tab.
lv_date = sy-datum + 2.
CALL FUNCTION 'FORMAT_DATE_4_OUTPUT'
EXPORTING
datin = lv_date
format = lv_format
IMPORTING
DATEX = lv_outdate.
move lv_outdate to wa_tab-bldat.
wa_tab-matnr = '0000003'.
APPEND wa_tab TO it_tab.
wa_fcat-fieldname = 'SEL'.
wa_fcat-ref_fieldname = 'XCHPF'.
wa_fcat-ref_tabname = 'MARA'.
wa_fcat-edit = 'X'.
wa_fcat-checkbox = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR : wa_fcat.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-ref_fieldname = 'MATNR'.
wa_fcat-ref_tabname = 'MARA'.
APPEND wa_fcat TO it_fcat.
CLEAR : wa_fcat.
wa_fcat-fieldname = 'BLDAT'.
wa_fcat-ref_fieldname = 'BLDAT'.
wa_fcat-ref_tabname = 'BKPF'.
APPEND wa_fcat TO it_fcat.
call 'REUSE_ALV_GRID_DISPLAY'' after this
Edited by: Ankur Parab on Oct 1, 2009 2:50 PM
Edited by: Ankur Parab on Oct 1, 2009 2:51 PM -
How to show date with format conforming to system date format ?
Hi all,
I write Java program running on Windows 2000 Advanced Server.
I want to show date in a status bar with the format the same as that in system date format where the program resides, so when I change the date format through the regional setting, I expect that the date format in the status bar will adjust accordingly.
But it seems that program fails to do so, the program keeps showing short date format MM/dd/yy. I've tried to use SimpleDateFormat.getDateInstance() method, but the result is the same.
Any suggestion would be greatly appreciated.
SetyaHello Setya !!
I have the same problem as you.. Did you find any solution for this?
Thank you,
Claudia -
How to show date on "stand-by screen" on N71?
Is it possible to show date on on N71 "stand-by screen" like in the manual. Where can I change this setting?
Hi there, the date should automatically display on the home screen under the network name provide the "general" profile is selected.
There is not setting to turn it on or off.
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4 -
How to Show data in grouping with check boxes.
Hi Experts,
I am new to ADF and want to resolve one issue for my urgent project requirement.
My Problem is :
In Employee, Department relationship i need to show data in a grouping of departments like for Marketing department all the related employees should come in a single column.
eg .
Dept Name Emp Name
Marketing Akshay Nitin Ritu
Sales Neeraj Vikas Venu
* All these department names and employees should come with check boxes and if i select one department all the employees should be checked.
Please Please suggest any solution asap.
Many Thanks in Advance.
Regards,
Nitin
Edited by: user10980736 on Feb 7, 2011 8:32 AMhi,
You can create two value nodes for storing these collections. The first one would be singleton node as it is the main list. Under that create the second node with singleton = false.
e.g.
---NodeA
--attrA1
--attrA2
--NodeB(singleton = false)
--attrB1
--attrB2
Now populate collection of object A in NodeA and after adding element in NodeA populate respective elements in NodeB.
IPrivate<View>View.INodeANode nodeA = wdContext.NodeAnode();
for (Iterator it = collectionA.iterator(); it.hasNext(); )
ObjectA objA= it.next();
IPrivate<View>View.INodeAElement nodeAElem= nodeA.createNodeAElement();
wdCopyservice.copy Corresponding(objA,nodeAElem);
nodeA.addElement(nodeAElem);
Collection collectioB =objA.getCollectionB();
for (Iterator it1 = collectionB.iterator(); it1.hasNext(); )
ObjectB objB= it1.next();
IPrivate<View>View.INodeBNode nodeB = nodeAElem.nodeBnode();
IPrivate<View>View.INodeAElement nodeBElem= nodeB.createNodeBElement();
wdCopyservice.copy Corresponding(objB,nodeBElem);
nodeB.addElement(nodeBElem);
Bind NodeA to the first table and NodeB to second one.
After that when you select record in first table automatically its corresponding records will be populated in second table.
Hope this helps!
Monalisa -
How to Transfer Data from editable ALV grid control to internal table?
Hi,
Can anyone give me a simple example by which I can transfer data from editable alv grid control back to the internal table. The ALV has been created by OO approach.
I would appreciate if the solution is provided without handling any events.
Regards,
AuroHello Auro
You simply need to call method <b>go_grid->check_changed_data</b> at PAI of the dynpro displaying the ALV grid. If data have been changed on the editable ALV grid then this method will raise event DATA_CHANGED. If you do not want or need to handle this event (e.g. for validating the edited values) then you do not define any event handler method.
Regards
Uwe -
How to validate data in editable ALV report after making changes
Hi Folks,
My requirement is to display data in ALV format with quantity field is editable. Once we get the data in display mode only quantity field is enabled right. I am going to make changes to that quantity field and updating that modifed value to the database table. Before updating databse table i want to validate the data for perticluar field which I edidted(Quantity).
Can you guide me on this.
Currently I am using FM: GET_GLOBALS_FROM_SLVC_FULLSCR and calling the method CHECK_CHANGED_DATA.
I want to validate the quantity data.
If I entered negative value like -100 instead of 100. It should validate and show some popup screen or message.
Pls guide me on this or give some code to do that.
Thanks&Regards,
SurendraHey Surendra,
Check if this helps: Link:[Click here|Edit Field in Oops Alv;
There are many posts available for this requirement. Please look SDN/web for same.
Regards,
Santosh -
How to show data in a matrix form from a table using SQL
Dear Friends,
I have a table with three columns with the following data:
Market, Product, Date, Value
Market-A Product-A 01/01/04 34
Market-A Product-A 01/02/04 33
Market-A Product-A 01/03/04 67
Market-A Product-A 01/04/04 64
Market-A Product-B 01/01/04 34
Market-A Product-B 01/02/04 36
Market-A Product-B 01/03/04 77
Market-A Product-B 01/04/04 32
Market-B Product-C 01/01/04 25
Market-B Product-C 01/02/04 56
Market-B Product-C 01/03/04 45
Market-B Product-C 01/04/04 68
Market-B Product-D 01/01/04 78
Market-B Product-D 01/02/04 75
Market-B Product-D 01/03/04 32
Market-B Product-D 01/04/04 35
I have a requirement where in I have to filter the products based on market and then show in the following format on the screen:
After filtering based on Market-A (eg) the data should look like:
01/01/04 01/02/04 01/03/04 01/04/04
Product-A 34 33 67 64
Product-B 34 36 77 32
Kinldy suggest how can I write a query to get the data in this format using SQL
Thanks & Regards,
Vinayscott@ORA92> -- test data:
scott@ORA92> SELECT * FROM a_table
2 /
Market-A Product-A 01/01/04 34
Market-A Product-A 01/02/04 33
Market-A Product-A 01/03/04 67
Market-A Product-A 01/04/04 64
Market-A Product-B 01/01/04 34
Market-A Product-B 01/02/04 36
Market-A Product-B 01/03/04 77
Market-A Product-B 01/04/04 32
Market-B Product-C 01/01/04 25
Market-B Product-C 01/02/04 56
Market-B Product-C 01/03/04 45
Market-B Product-C 01/04/04 68
Market-B Product-D 01/01/04 78
Market-B Product-D 01/02/04 75
Market-B Product-D 01/03/04 32
Market-B Product-D 01/04/04 35
scott@ORA92> -- query:
scott@ORA92> SELECT product,
2 SUM (DECODE (the_date, to_date ('01/01/2004', 'mm/dd/yyyy'), value)) AS "01/01/04",
3 SUM (DECODE (the_date, to_date ('01/02/2004', 'mm/dd/yyyy'), value)) AS "01/02/04",
4 SUM (DECODE (the_date, to_date ('01/03/2004', 'mm/dd/yyyy'), value)) AS "01/03/04",
5 SUM (DECODE (the_date, to_date ('01/04/2004', 'mm/dd/yyyy'), value)) AS "01/04/04"
6 FROM a_table
7 WHERE market = 'Market-A'
8 GROUP BY product
9 /
Product-A 34 33 67 64
Product-B 34 36 77 32
scott@ORA92> -
How to show data output in SSRS
Below is my simply query. I need to use Matrix SSRS format. I will put "Region" in "row" column, Header will use "Customer_Requested_Date" field, and will use "Amount" in the data session.
The data output in the "Header" field will show January.....until December (current month is December). In the Amount field under "December" (current month), I need to compute the formula like "Customer_Request_Month"
< = Current Month". (I do not have the field name called Current Month, need to get a Date/Time function to display Current Month).
How I can come up the data output under December Header field to show the current Amount in that section?
November, 2014
December,2014
Region
Amount
CRD Month < = Current Month
Select
Customer_Request _Date,
Customer_request_Month,
Transaction_Type,
Region,
Amount
From Table
Thanks,
Josephine
Josey TangHi Josey,
According to your descritption, you want to show the current month in your tablix. Right?
In Reporting Services, we can use the Now() and datepart() function to get the current month. Please use the expression below:
=Datepart("m",Now())
In this scenario, since you want to show the amount of current month within the column group, you need to create another dataset which always show the data of current month. Then you can use lookup() function to get the amount value from the current dataset
based on the Region. Please follow the steps below:
Create a same dataset(DataSet2) using your query. Add a filter on this dataset. Make Fields!Customer_request_Month.Value
=
Datepart("m",Now())
Then add a column inside of column group, using the expression below:
=lookup(Fields!Region.Value,Fields!Region.Value,Fields!Amount.Value,"DataSet2")
The design and result look like below:
Reference:
Expression Examples (Report Builder and SSRS)
Lookup Function (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
How to show data through table control
Hi Experts,
I have created an table control through wizard using table EKKO.
I have to populate one internal table( type ekko ), and then show it in output through table control.
Please advise, how to do that and in where i have to write the codes.
I will reward points for every suggestion
Thanks in advance.
regardshi saubrab,
This is kiran kumar.G.I am sending some sample code to populate data into table control check it once.
i will give input in 100 screen. and display table control in 200 screen.check it once once ..ok....
SE38 :(CODE)
*& Module pool YMODULEPOOL_TABLECONTROL1 *
*& DEVELOPER : KIRAN KUMAR.G *
*& PURPOSE : TABLE CONTROL DEMO *
*& CREATION DT : 17/12/2007 *
*& T.CODE : YMODTABLECONTROL1 *
*& REQUEST : ERPK900035 *
PROGRAM ymodulepool_tablecontrol1.
Tables
TABLES: yvbap, "Sales Document: Item Data
vbak. "Sales Document: Header Data
Controls
CONTROLS: my_table TYPE TABLEVIEW USING SCREEN 200.
Global Variables
DATA: gv_lines TYPE i,
gv_lines1 type i,
gv_temp type i,
gv_flag(20) TYPE c VALUE 'DISP',
gv_mode1 TYPE c,
gv_mode TYPE c VALUE 'C'. " C: Change, D :Display
Internal Table
DATA: BEGIN OF gt_item OCCURS 0,
vbeln LIKE vbap-vbeln, "Sales Document Number
posnr LIKE vbap-posnr, "Sales Document Item
matnr LIKE vbap-matnr, "Material Number
matkl LIKE vbap-matkl, "Material Group
arktx LIKE vbap-arktx, "Short Text for Sales Order Item
cflag, "Deletion Indicator
END OF gt_item.
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'ZTABLECONTROL' OF PROGRAM 'YMODULEPOOL_TABLECONTROL'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN 'DISP'.
SELECT single vbeln
erdat
angdt
bnddt
FROM vbak
INTO (vbak-vbeln,vbak-erdat,
vbak-angdt,vbak-bnddt)
WHERE vbeln = vbak-vbeln.
IF sy-subrc EQ 0.
*Fetch the table control data and place them in Internal Table
SELECT vbeln
posnr
matnr
matkl
arktx
FROM yvbap
INTO TABLE gt_item
WHERE vbeln = vbak-vbeln.
IF sy-subrc EQ 0.
*NO OF line in the Internal Table
DESCRIBE TABLE gt_item LINES gv_lines.
my_table-lines = gv_lines + 20.
ENDIF.
ENDIF.
*Call Screen 200.
SET SCREEN 200.
WHEN 'EXIT' OR 'BACK' OR 'CANCEL'.
*Exit from the Program
CALL TRANSACTION 'SESSION_MANAGER'.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
module STATUS_0200 output.
SET PF-STATUS 'ZTABLECONTROL1'.
endmodule. " STATUS_0200 OUTPU
*& Module copy_data OUTPUT
text
module copy_data output.
*Fetch the current line data from the Table control
read table gt_item index my_table-current_line.
if sy-subrc eq 0.
*Populating data into screen fields
gt_item-vbeln = gt_item-vbeln.
gt_item-posnr = gt_item-posnr.
gt_item-matnr = gt_item-matnr.
gt_item-matkl = gt_item-matkl.
gt_item-arktx = gt_item-arktx.
endif.
SE51:CODE (SCREEN 100)
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
SE51 :CODE (SCREEN 200)
PROCESS BEFORE OUTPUT.
MODULE STATUS_0200.
loop at gt_item with control my_table cursor my_table-current_line.
module copy_data.
endloop.
PROCESS AFTER INPUT.
loop at gt_item.
MODULE USER_COMMAND_0200.
endloop.
HAVE A NICE DAY..
Award points if helpful,kiran kumar.G -
WDABAP - How to read data from filtered ALV table
HI
In Web Dynpro for ABAP.
I have a view with an ALV table on it.
I would like to know how to read the data that's been filtered in the ALV table?
RegardsI've managed to find out that during runtime the following code returns a reference to a class pool:
data: lr_salv_wd_table TYPE REF TO iwci_salv_wd_table.
lr_salv_wd_table = wd_This->wd_cpIfc_ALV_GRAPHICS_DATA( )
Two of the attributes of this class pool are:
<b>IG_COMPONENTCONTROLLER~R_COMPONENT = </b>
<b> IF_COMPONENTCONTROLLER~R_COMPONENT = </b>
The attributes, IG_COMPONENTCONTROLLERR_COMPONENT and IF_COMPONENTCONTROLLERR_COMPONENT references a class CL_SALV_WD_C_TABLE. This class has an attribute R_RESULT_DATA which references a class CL_SALV_WD_RESULT_DATA_TABLE. The attribute T_RESULT_DATA contains the filtered data.
Now I need to find out how I can access these attributes in the view.
Regards -
How to show PieChart Vertically instead of Horizontally?
Hi,
Like the title indicates, I hope that is there property or
method or event allowing to show a PieChart Vertically instead of
horizontally.
Cheers,for example :
my pie chart represents two values : 50% and 50%. How this
values will be shown in PieChart? the answer is vertically the
first 50% in the top and the second one in the bottom.
What I want is to show the values horizontally that's mean in
this example the first 50% in the right and the other one in the
left.
Thank you in advance :)
Maybe you are looking for
-
If you can't get your new Shuffle to work..check this out
My computer is approx. 3-4 years old. After wasting lots of time troubleshooting why my computer wouldn't recogize my iPod, I finally called Apple. They said they thought I had a problem with my USB being too slow. I then called Radio Shack, and they
-
Video card problems, monitor distortion
Hi, I have a 17 inch Apple Studio Display (ADC Connector). It's about three years old now. Just recently after I woke up my computer, the monitor suddenly had this crazy distortion that's a kind of banding that goes down the screen. I took a picture
-
Rounding of decimals in totals
I have noticed a difference in the behavior of BPS layouts vs. BEx queries (or using the LISTCUBE transaction to display InfoProvider contents directly). In the layout, I have chosen to display 0 decimal places for a key figure. In a BEx query upon
-
Oracle VM 3.0.1 Discover Server Fails with NullPointerException
I am testing Oracle VM 3.0.1 on two physical server, one for the Server one for the Manger, they are able to ping each other by hostname, but when trying to discover servers the job fails on fixupMACAddress, Job Construction Phase begin() Appended op
-
Route tickets based on Message creaters's location
Hi SDN team, Let me introduce my self since I am new to SAP basis world & to this community. My name is Rajani kumari , joined recently as SAP basis admin. I was assigned to configure in SM 4.0 . I have few questions in configuring Service Desk in SM