How to show Firefox toolbar after deployment

I am deploying Firefox 30 in our enterprise. How can I get the menubar to show after Firefox has been deployed? I found that I can most probably control this using userChrome.css, but I don't know the syntax nor can I find a decent guide. The statement that I have been using:
#toolbar-menubar {display: inline !important; }
This gets me the menubar, but also moves the search bar and the configuration menu up to inline with the tabs. What else can I do?

cor-el, surprisingly, I actually caught that and added it later. That did not work.
Is it just me and my lack of experience in this area or does this seem to be overly complicated for such a seemingly simple request? I was looking through the xul.css file to see if there was something that would stand out as a possibility for a simple change, but I am adverse to tinker with these settings without knowing exactly what I am doing.
Anyway, if you something else I could try, I would appreciate any help. Thank you again.

Similar Messages

HOW DO I SHOW MENU TOOLBAR AFTER HIDING BY MISTAKE?

HOW DO I SHOW MENU TOOLBAR & SEARCH BOX FOR FIREFOX AFTER HIDING BY MISTAKE?

In Firefox 3.6 on Windows you can hide the menu bar via "View > Toolbars" or via the right click context menu on a toolbar.
Press and hold the Alt key down to bring up the menu bar.
Go to "View > Toolbars" or right-click the menu bar or press Alt+V T to select which toolbars to show or hide.
See also [[Menu bar is missing]]

How to show mandatory icon after the Label text?

Hi ,
I am using JDeveloper 11.1.1.4.
My Scenario is I have <af:inputtext> with Property required="true".
Label look like ,
"*Name but I want to show like Name* .I want to show the * icon after the label text .
How to achieve this in ADF ? ..
Thanks ...

Hi rfh,
Thanks for the updates ,
I tried with ,
.AFRequiredIconStyle
float:right;
this CSS moving the * icon to right side but not after the label ,It's moveing infront of the InputText Value the output looks like,
Label *Value
I tried with ,
AFRequiredIcon:alias
content:inhibit;
It's diabled * icon entire application .This solution is ok ...But I want to diable * icon for only particular places.
How to hide * icon for particular fields ? ......
Thanks......

How to change SessionTimeOut value after deployed war file in SunAPP Server

Hi Guys,
Any one can help and give some guidence How i can change the session time out value in web.xml after deployed the file on sun one application server.This is the code given below which i have to change the time of session from 5 minutes to 1 minute.
<session-config>
<session-timeout>5</session-timeout>
</session-config>
Regards,
Suresh.Babu.Ramagani.

For SunOne session configuration is in the sun-web.xml.
http://docs.sun.com/app/docs/doc/820-2207/abxcz?a=view
-steve

How to manage the tables after deploying an SDA for Oracle

How can I manage the tables after deploying an SDA on Oracle.There is tool for MaxDB,but how can I connection to the Oracle Database?
Thanks

In J2ee administrator console

How to recover lost toolbar after pressing full page option on computer

I pressed the "full page" option at the top either in edit or view...and then the url bar and firefox toolbar..all of it disappeared.How do I retrieve it?

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

How to run a EnterpriseBean after Deployment?

Hello,
my problem is that i have to run a Bean (Entity oder Session) immidiately after deploying it. I get managed to call it Remotely, but not at startup. As i see it an instance of an Bean is created when calling it throiugh the remote interface. But How do I manage to get any function to be calles after deployment without any Remote call? Or MUST i call any remote functions to get a Bean created? (E.g. through a dummy "starter" program?)
Thanks,
MR

You have to write some client code firstly to call create on the Home Interface this will return a reference to the ejb object in question and then secondly using this reference call a business method on the bean.
Hello,
my problem is that i have to run a Bean (Entity oder
Session) immidiately after deploying it. I get managed
to call it Remotely, but not at startup. As i see it
an instance of an Bean is created when calling it
throiugh the remote interface. But How do I manage to
get any function to be calles after deployment without
any Remote call? Or MUST i call any remote functions
to get a Bean created? (E.g. through a dummy "starter"
program?)
Thanks,
MR

How to modify LobSystemInstance properties after deployment

Hi,
I've added some properties to my LOBSystemInstance (like explained here:http://social.technet.microsoft.com/Forums/en-US/sharepoint2010programming/thread/01ad2bf2-7ebc-434f-beac-e2d934847b34)
I cannot find where to modify the properties once the BDC is deployed.
Is it possible to have an administrator change the property values once the BDC is deployed? For instance when a DB password changes?
regards, Felix

Hi Felix,
You need to be using a custom connector to be able to use those properties and interfaces.
I have managed to get those elusive properties you are after, I followed the book from Scot Hiller and also this blog:
http://jardalu.blogspot.com/2010/03/writing-custom-connector-for-bcs.html
I have written an internal document for us at Lightning Tools explaining how to transform a BCS Meta Man project to a Custom Connector. This is the full model I used
<?xml version="1.0" encoding="utf-8"?>
<Model Name="CustomConnectorMashupLobSystemModel" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://schemas.microsoft.com/windows/2007/BusinessDataCatalog">
<LobSystems>
<LobSystem Name="CustomConnectorMashupLobSystem" Type="Custom">
<Properties>
<Property Type="System.String" Name="SystemUtilityTypeName">CustomConnectorMashup.Custom.Connector, CustomConnectorMashup, Version=1.0.0.0, Culture=neutral, PublicKeyToken=02df3463d06f0080</Property>
</Properties>
<LobSystemInstances>
<LobSystemInstance Name="CustomConnectorMashupLobSystemInstance">
<Properties>
<Property Name="ConnectionString" Type="System.String">Persist Security Info=False; Integrated Security=SSPI; Server=.\;Connect Timeout=30;Database=AdventureWorksLT;</Property>
</Properties>
</LobSystemInstance>
</LobSystemInstances>
<Entities>
<Entity Name="Product" Namespace="CustomConnectorMashup.Model" Version="20.0.0.0">
<Properties>
<Property Name="OriginalTableName" Type="System.String">[SalesLT].[Product]</Property>
<Property Name="IsCustomCode" Type="System.Boolean">false</Property>
<Property Name="Class" Type="System.String">CustomConnectorMashup.Model.ProductEntityService, CustomConnectorMashupLobSystem</Property>
<Property Name="Title" Type="System.String">Name</Property>
</Properties>
<Identifiers>
<Identifier Name="ProductID" TypeName="System.Int32" />
</Identifiers>
<Methods>
<Method Name="Test">
<Parameters>
<Parameter Name="returnParameter" Direction="Return">
<TypeDescriptor Name="ProductList" TypeName="System.Collections.Generic.IEnumerable`1[[CustomConnectorMashup.Model.GetAllProductEntitysProperties, CustomConnectorMashup, Version=1.0.0.0, Culture=neutral, PublicKeyToken=02df3463d06f0080]]" IsCollection="true">
<TypeDescriptors>
<TypeDescriptor Name="Product" TypeName="CustomConnectorMashup.Model.GetAllProductEntitysProperties, CustomConnectorMashup, Version=1.0.0.0, Culture=neutral, PublicKeyToken=02df3463d06f0080">
<TypeDescriptors>
<TypeDescriptor Name="ProductID" TypeName="System.Int32" IdentifierName="ProductID" ReadOnly="true" />
<TypeDescriptor Name="Name" TypeName="System.String" />
</TypeDescriptors>
</TypeDescriptor>
</TypeDescriptors>
</TypeDescriptor>
</Parameter>
</Parameters>
<MethodInstances>
<MethodInstance Name="Test" DefaultDisplayName="FinderTest" Type="Finder" ReturnParameterName="returnParameter" />
</MethodInstances>
</Method>
</Methods>
</Entity>
</Entities>
</LobSystem>
</LobSystems>
</Model>
This was my connector class
using System;
using System.Collections;
using System.Collections.Generic;
using CustomConnectorMashup.Model;
using Microsoft.BusinessData.Infrastructure;
using Microsoft.BusinessData.MetadataModel;
using Microsoft.BusinessData.Runtime;
namespace CustomConnectorMashup.Custom
public class Connector : ISystemUtility, IAdministrableSystem
#region IAdministrableSystem Members
public IList<AdministrableProperty> AdministrableLobSystemProperties
get { return null; }
public IList<AdministrableProperty> AdministrableLobSystemInstanceProperties
get
return new List<AdministrableProperty>
// Add the Connection String to the Administrable Properties so it can be changed in Central Administration
new AdministrableProperty("Connection String", "The Connection String", typeof (string), "ConnectionString", typeof (string), true)
#endregion
public IEnumerator CreateEntityInstanceDataEnumerator(object rawStream, ISharedEntityState sharedEntityState)
var enumerableStream = rawStream as IEnumerable;
if (enumerableStream != null)
return enumerableStream.GetEnumerator();
throw new InvalidOperationException("Invalid stream returned");
public ITypeReflector DefaultTypeReflector
get { return null; }
public IConnectionManager DefaultConnectionManager
get { return null; }
public void ExecuteStatic(IMethodInstance methodInstance, ILobSystemInstance lobSystemInstance, object[] args,
IExecutionContext context)
if (methodInstance == null)
throw (new ArgumentNullException("methodInstance"));
if (lobSystemInstance == null)
throw (new ArgumentNullException("lobSystemInstance"));
if (args == null)
throw (new ArgumentNullException("args"));
// Read Connection string from LobSystem Instance
var connectionString = lobSystemInstance.GetProperties()["ConnectionString"] as string;
switch (methodInstance.MethodInstanceType)
case MethodInstanceType.Finder:
// Added switch to allow multiple instances of each type
switch (methodInstance.Name)
case "Test":
ExecuteTestMethod(connectionString, args);
break;
break;
default:
throw new NotImplementedException("Only Finder Method Implemented");
private static void ExecuteTestMethod(string connectionString, object[] args)
// Call default method and assign to 0 index of args
args[0] = ProductEntityService.TestMethod(connectionString);
I hope this helps a bit, I do have a project that worked for me that I could send to you to pick apart if that would be helpful. I think I might need to write a blog post so others can benefit from it.
All the best
Phill
helpful? …please mark it so!
Lightning Tools Check out our SharePoint Tools and Web Parts
BCS Meta Man Automatic BCS Model Generation
BCS Tester Man Open Source BCS test client

Subject: How to show H (hours) after Duration

I am writing a query on 0TCT_VC21. It has a Key Figure Duration which shows
Time taken by a process type in supposedly Seconds. Time is shown as 51S, I presume S is
for second
Now I have defined a calculated Key Figure, Duration in Hours which is Duration/3600.00.
1. Results for Duration in Hours still show S after the result even though value of duration in hrs is correct (i.e., my formula has been applied). How to replace S by H or HRs.
2. When duration in hours is less than 1, result is shown as 0, instead I want to show result as 0.05. How do I accomplish this? When I look in properties of Duration Key Figure, under Display, it shows Number of Decimals as 0.00 and Scaling Factor 1; but I do not this for Duration in Hours. Why?

Hi,
I have the same problem. You can add a formula NODIM for your new CKF so seconds will not be displayed. And rename the CKF like 'Total time by hour' would be OK. I don't think it's possible to convert it to hour in query level.
If you want to see your CKF display 0.05 instead of 0, just change the CFK's property, change decimal number to 0.00 and scaling factor 1. CKF doesn't copy properties from KF, you need to set it separately.
Regards,
Frank

How to restore Firefox windows after the restore has already been done?

System:
Firefox 3.6.16
Windows Vista Business 64-bit
Service Pack 2
Core2 Extreme Q9300 4 x 2.53 GHz
8 GB RAM
I had 187 Firefox windows open when Firefox crashed. I had restore on. When the window that asks which windows I want to restore appeared, I deselected a few pages that I thought might be causing problems. I've never done this before (choose not restore all the windows that were open) and Firefox has always managed to restore all my windows. But having chosen 3 out of 187 not to open, Firefox only opened 30. The rest seem to be lost. In principle I should be able to find them in my history, but I visit hundreds of pages per day and only keep open a couple until the next day. My open Firefox windows to some extent constitute my to-do list, and some have been open for months. Stupidly, I had not backed up this to-do list (with for example screen captures) and I would really like to get it back. I am not afraid of a little hacking. Is there anything I can do?
[And by the way, this is not really related to the above problem: after a while it often becomes impossible to actually open some of the Firefox windows that I have open. I probably average around 80, but range from 15 or so 150 usually. [I try to close them as I work through them with some success, so that the numbers don't just keep on increasing.] But this is not so much a problem because when click on Firefox in the task bar, I still get to see the titles of the webpages I am on and I can easily relocate them if I can't open a particular page. Yes, I do realise that the real solution to my problems would be to have less windows open, but that ill suits the way I work.]

Hi Tejasav,
For assistance with this issue please see the following link which should help you out;
https://service.sap.com/sap/support/notes/1292374
Best of luck,
Derrick Hurley
ABAP Development Workbench
SAP

How to see the data after deploying

Hi, I installed owb 9.2.0.2 and created a test mapping and deployed it successfully. It inserted few rows in my table. How can i see the data which was inseted other than SQLplus.
Can i view data trough any OWb reports or do I need to use discoverer or report tools to view the data.

Hi Sam,
SQL Plus is one route, the other is indeed Discoverer or any relational query tool. For 10gR2 we are adding data viewers so you can see this directly in OWB.
Jean-Pierre

Satellite L500 - How to show external display after closing lid?

Hi,
i`m using the Satellite L500-120 Notebook, and before installing Windows 7 the laptop had a very comfortable function, when i applied an external display.
When i closed the lid of my notebook, the desktop was shown on my external display (with the native resolution of the external display), so i didn`t have to
switch anything at the Control Panel. In Windows 7, i`m missing this function. I already tried to use the Control Panel, but there are no settings, which fits
with the earlier ones. I can duplicate the display, in order to see my desktop screen at my external display, but with the notebook resolution of 1366 x 768.
If i extend the displays, then there is only the background image at the external display, but this time with the native resolution.
So my question is, how to conifgure Windows to recognize that i closed the lid, and that the desktop screen has to be shown on my external display?
Or do i have to install one of the Toshiba applications, which i had before, that realized this function?
Thanks for any help!

Hi
Im not a Windows 7 user because I will wait until it will be released offical but I hope I can help you a little bit:
First of all in Power Management you can choose the action what happens if you close the Lid (e. g. sleep, turn off, etc.). This action should be disabled because otherwise the notebook will shut down or something else.
Then I think you have to install the display driver for your notebook. You can try the Vista driver because the most of them are work on Windows 7.
Then you should be able to set the correct screen resolution for external monitor.
A working display driver is important for clone or extends monitors so check this!!

How to reinstall firefox 7 after complete deletion and recover all personal settings

I tried windows restore, but there are no records of a restore point.
I was using CC Cleaner program which told me that a previous version Firefox 6 was still on the drive. I allowed it to delete that, and then found that my Firefox 7 icon & program had disappeared completely.
I could just download & reinstall FF7, but then all my saved settings would probably be wiped out -- is that correct ??

Give it a try. Firefox saves all of your personal settings in a different folder than the program itself. So it's possible that you still have your personal settings ([[Profiles|profile folder]]). You can install the latest Firefox and if it finds your profile you'll be back in business.

Upgraded to firefox 3.6.6 lost my mozilla firefox toolbar. how do I get it back

Lost my mozilla firefox toolbar, after upgrading to firefox 3.6.6. How do I get it back. Can I restore to previous version, so I can have toolbar back.
== This happened ==
Just once or twice
== upgraded to firefox 3.6.6

Can't see the Menu Bar (File, Edit, View, History...Help)? Hold down the key ( key in OSX) and press the following letters in this exact order: V T M
The Menu Bar should now be displayed permanently, unless you turn it off again (View > Toolbars). Turning the Menu Bar on and off is a new feature in version 3.6.
See other bars under View > Toolbars. Click on one of them will place a check mark (display) or remove the check mark (not displayed).
To display the Status Bar, View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
* If items are missing then see if you can find them in the View > Toolbars > Customize window.
* If you see the item in the Customize window then drag it back from the Customize window to the Navigation toolbar.
* If you do not see that item then click the Restore Default Set button in the View > Toolbars > Customize window

How can I run a vi after deploying into a PXI Machine

Hi;
I am wondering if there is anyone out there who knows how to run a vi after deploying into a PXI machine from my host machine. In my application, I have some vi's that are deployed into my PXI machine. My problem is that when I would like to start these vi's simultaneously after deploying them. My current approach is to call vi reference and then invoke-> run. However, since there vi's are being deployed from a host machine and they are running in the PXI machine, I don't know how to create vi reference with the path constant. In other words, how can I find out the path of my vi after being deployed into my PXI machine from the host.
Best Regards,
Solved!
Go to Solution.

When VIs are deployed onto a PXI Real-Time controller they are generally copied to a C:\ni-rt\startup directory on the controller.
Helpfully, this KnowledgeBase article talks about how specify and programmatically launch VIs on an Real-Time controller.
I hope this helps,
Fred V -- Product Support Engineer -- LabVIEW R&D -- National Instruments

How to show Firefox toolbar after deployment

Similar Messages

Maybe you are looking for