How to show previously hidden box on slide start?

I have added a textbox and graphic to a slide. I also added a close button. When the user clicks the close button, i want to hide the textbox and graphic. I was successfuly able to do that using the "Multiple Actions" option button.
The problem is that once the user hides the textboxes, I want those to reappear if the user returns to the slide. How do I achieve this?
Thanks

Hi.
This can be simply achieved by setting the 'On Slide Enter' action present in the Slide Properties dialog box.
Steps:
1. Double-click the slide on which these objects are present. Slide Properties dialog should get invoked.
2. Select the On slide enter drop-down and then the 'Multiple actions' option in the drop-down.
3. Now, select the Show option in the Multiple Actions dialog and select the objects you want to show, when user revisits the slide.
Thanks.
Chinmay.

Similar Messages

My iPad shows a text box on my start up screen iCloud backup stating that the iPad has not been backed up in 2 weeks etc and i press "ok" to acknowledge but it will not erase and I cannot turn the pad off by the main on off switch - cannot use pad!!

My ipad shows a text box on my start up screen stating icloud backup - this ipad hasnt been backed up in 2 weeks . backups happen when this ipad is plugged in, locked and connected to wi fi and ok under - so press ok but cannot remove the box or back to my home screen and cannot turn off the ipad from main switch at top of pad? Can anybody help? Thanks

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

[SOLVED] ark (kde), how to show up hidden folders?

If I want to extract anything with ark, how can I make my hidden folders visible in the dialog box?
I mean, is that even possible?
Last edited by scar (2013-01-16 08:16:22)

Right-click on the folder list, enable "show hidden folders"

How to show/hide sliders on a slider control using property nodes?

If I have a slider with multiple sliders on it how do I change which sliders are visible using property nodes? The only property I have found is making the entire control to be visible or not. This is a possible solution to have two different controls, one slider with only one slider and another slider with two sliders overlapped, but not desirable.
I found on a thread in the forum that it is possible but the user did not provide any specifics about which property it was. (http://forums.ni.com/ni/board/message?board.id=170&message.id=181279&query.id=34404#M181279)
I would appreciate an example VI if possible (Preferred version is 8.5 but versios 8.2, 8.0, and 8.6 are available to me).
Thank you in advance for the help,
Aaron

Just make them transparent! Here's a quick draft.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
HideSliders.vi ‏20 KB

How to show asterisk * effect once the user starts editing the document??

I wrote a java text editor. I creat a new internal frame and allows to open a document.
How to have an effect (an asterisk * follows the filename in title bar) once
the user starts editing the document? And once I save that file, that asterisk * will
disappear. It seems to me we need to add a listener, but not sure how to change
the title bar of internal frame??

just use DocumentListener like
myTextArea.getDocument().addDocumentListener(new DocumentListenet(){
public void changedUpdate(DocumentEvent e){
frame.setTitle( frame.getTitle() + "*" );
implements two other methods too

Running 5.01 don't want to upgrade to 6. How do I stop "updater" box everytime I start firefox?

I want to wait, but it asks every time. Wat a pain.

The replies don't address the question: "I started getting bombarded with requests to upgrade to Firefox 5.0. This goes on all day, all night...it never stops. Is there a place I can ask you guys to please stop?"
I have the same problem: I also don't want to upgrade to 5.0 (4.0 messed me up enough and I finally got that straightened out). How do I stop those annoying requests? It should have a "No" option.
Please email replies to [email protected] Thanks.

How to show check box in ALV grid??

Hi All,
     I am using an option edit in the feild catalogue which allows me to change the values in a few columns in the ALV list.
What I want is to be able to show a check box in a few columns which user can check and use the value X in the program for the later processing....
Can somebody tell me how to show a check box in the ALV screen in the changeable format??
Win full point by answering this typical question..
Thanks - Chandan

hi go through the fallowing code.
*& Report YGS_ALV_BOM                                                 *
REPORT YGS_ALV_BOM                             .
TABLES : MAST,STKO,STPO.
TYPE-POOLS: SLIS.
TYPES : BEGIN OF TY_MAST,
        CHECK_BOX,
        MATNR TYPE MAST-MATNR,
        WERKS TYPE MAST-WERKS,
        STLAN TYPE MAST-STLAN,
        STLNR TYPE MAST-STLNR,
        STLAL TYPE MAST-STLAL,
        END OF TY_MAST.
TYPES : BEGIN OF TY_STKO,
        STLTY TYPE STKO-STLTY,
        STLNR TYPE STKO-STLNR,
        STLAL TYPE STKO-STLAL,
        STKOZ TYPE STKO-STKOZ,
        BMENG TYPE STKO-BMENG,
        BMEIN TYPE STKO-BMEIN,
        END OF TY_STKO.
TYPES : BEGIN OF TY_STPO,
        LIGHTS,
        STLTY TYPE STPO-STLTY,
        STLNR TYPE STPO-STLNR,
        STLKN TYPE STPO-STLKN,
        STPOZ TYPE STPO-STPOZ,
        IDNRK TYPE STPO-IDNRK,
        MENGE TYPE STPO-MENGE,
        MEINS TYPE STPO-MEINS,
        END OF TY_STPO.
DATA : IT_MAST TYPE TABLE OF TY_MAST,
       WA_MAST TYPE TY_MAST,
       IT_STKO TYPE TABLE OF TY_STKO,
       WA_STKO TYPE TY_STKO,
       IT_STPO TYPE TABLE OF TY_STPO,
       WA_STPO TYPE TY_STPO.
DATA : lt_fieldcat TYPE slis_t_fieldcat_alv,
       ls_layout TYPE slis_layout_alv,
       ls_event TYPE slis_alv_event,
       lt_event TYPE slis_t_event,
       it_sortinfo type slis_t_sortinfo_alv,
       ls_header TYPE slis_listheader,
       lt_header TYPE slis_t_listHEADER.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
SELECT-OPTIONS : S_MATNR FOR MAST-MATNR.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM BUILD_FIELDCAT USING LT_FIELDCAT.
PERFORM BUILD_LAYOUT.
END-OF-SELECTION.
PERFORM DISPLAY_DATA.
*&      Form GET_DATA
*       text
* --> p1        text
* <-- p2        text
form GET_DATA .
REFRESH : IT_MAST.
SELECT MATNR
       WERKS
       STLAN
       STLNR
FROM MAST
INTO CORRESPONDING FIELDS OF TABLE IT_MAST
WHERE MATNR IN S_MATNR.
endform.                    " GET_DATA
*&      Form BUILD_FIELDCAT
*       text
* --> p1        text
* <-- p2        text
form BUILD_FIELDCAT USING LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : L_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
REFRESH : LT_FIELDCAT.
        L_FIELDCAT-COL_POS = 1.
        L_FIELDCAT-FIELDNAME = 'MATNR'.
        L_FIELDCAT-TABNAME = 'IT_MAST'.
        L_FIELDCAT-REF_FIELDNAME = 'MATNR'.
        L_FIELDCAT-REF_TABNAME = 'MAST'.
        APPEND L_FIELDCAT TO LT_FIELDCAT.
        L_FIELDCAT-COL_POS = 2.
        L_FIELDCAT-FIELDNAME = 'WERKS'.
        L_FIELDCAT-TABNAME = 'IT_MAST'.
        L_FIELDCAT-REF_FIELDNAME = 'WERKS'.
        L_FIELDCAT-REF_TABNAME = 'MAST'.
        APPEND L_FIELDCAT TO LT_FIELDCAT.
        L_FIELDCAT-COL_POS = 3.
        L_FIELDCAT-FIELDNAME = 'STLNR'.
        L_FIELDCAT-TABNAME = 'IT_MAST'.
        L_FIELDCAT-REF_FIELDNAME = 'STLNR'.
        L_FIELDCAT-REF_TABNAME = 'MAST'.
        APPEND L_FIELDCAT TO LT_FIELDCAT.
endform.                    " BUILD_FIELDCAT
*&      Form BUILD_LAYOUT
*       text
* --> p1        text
* <-- p2        text
form BUILD_LAYOUT .
CLEAR LS_LAYOUT.
LS_LAYOUT-BOX_FIELDNAME = 'CHECK_BOX'.
LS_LAYOUT-BOX_TABNAME = 'IT_MAST'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_DATA
*       text
* --> p1        text
* <-- p2        text
form DISPLAY_DATA .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
*   I_INTERFACE_CHECK              = ' '
*   I_BYPASSING_BUFFER             =
*   I_BUFFER_ACTIVE                = ' '
   I_CALLBACK_PROGRAM             = SY-REPID
   I_CALLBACK_PF_STATUS_SET       = 'PF_STATUS'
   I_CALLBACK_USER_COMMAND        = 'USER_COMMAND'
*   I_STRUCTURE_NAME               =
   IS_LAYOUT                      = LS_LAYOUT
   IT_FIELDCAT                    = LT_FIELDCAT
*   IT_EXCLUDING                   =
*   IT_SPECIAL_GROUPS              =
*   IT_SORT                        =
*   IT_FILTER                      =
*   IS_SEL_HIDE                    =
*   I_DEFAULT                      = 'X'
*   I_SAVE                         = ' '
*   IS_VARIANT                     =
*   IT_EVENTS                      =
*   IT_EVENT_EXIT                  =
*   IS_PRINT                       =
*   IS_REPREP_ID                   =
*   I_SCREEN_START_COLUMN          = 0
*   I_SCREEN_START_LINE            = 0
*   I_SCREEN_END_COLUMN            = 0
*   I_SCREEN_END_LINE              = 0
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER        =
*   ES_EXIT_CAUSED_BY_USER         =
TABLES
    t_outtab                       = IT_MAST
* EXCEPTIONS
*   PROGRAM_ERROR                  = 1
*   OTHERS                         = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " DISPLAY_DATA
FORM PF_STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'YSTATUS' OF PROGRAM SY-REPID
                           EXCLUDING RT_EXTAB.
ENDFORM.
FORM USER_COMMAND USING RF_UCOMM TYPE SY-UCOMM
                  SELFIELD TYPE SLIS_SELFIELD.
CASE RF_UCOMM.
      WHEN '&NEXT'.
       PERFORM GET_DATA_BOM .
       PERFORM BUILD_FIELDCAT_BOM USING LT_FIELDCAT.
       PERFORM BUILD_LAYOUT_BOM.
       PERFORM DISPLAY_DATA_BOM.
ENDCASE.
ENDFORM.
*&      Form GET_DATA_BOM
*       text
* --> p1        text
* <-- p2        text
form GET_DATA_BOM .
CLEAR   : WA_STPO,
            WA_MAST.
REFRESH : IT_STPO.
DATA : IT_CHECK TYPE TABLE OF TY_MAST.
LOOP AT IT_MAST INTO WA_MAST.
      IF WA_MAST-CHECK_BOX EQ 'X'.
         APPEND WA_MAST TO IT_CHECK.
      ENDIF.
ENDLOOP.
SELECT STLTY
         STLNR
         STLKN
         VGKNT
         IDNRK
         MENGE
         MEINS
    FROM STPO
    INTO CORRESPONDING FIELDS OF TABLE IT_STPO
     FOR ALL ENTRIES IN IT_CHECK
   WHERE IDNRK EQ IT_CHECK-MATNR.
CLEAR WA_STPO.
   LOOP AT IT_STPO INTO WA_STPO.
     SELECT SINGLE * FROM MAST WHERE MATNR EQ WA_STPO-IDNRK.
     IF SY-SUBRC = 0.
       WA_STPO-LIGHTS = '2'.
     ELSE.
       WA_STPO-LIGHTS = '1'.
     ENDIF.
     MODIFY IT_STPO FROM WA_STPO.
   ENDLOOP.
endform.                    " GET_DATA_BOM
*&      Form BUILD_FIELDCAT_BOM
*       text
* --> p1        text
* <-- p2        text
form BUILD_FIELDCAT_BOM USING LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : L_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
REFRESH : LT_FIELDCAT.
        L_FIELDCAT-COL_POS = 1.
        L_FIELDCAT-FIELDNAME = 'STLTY'.
        L_FIELDCAT-TABNAME = 'IT_STPO'.
        L_FIELDCAT-REF_FIELDNAME = 'STLTY'.
        L_FIELDCAT-REF_TABNAME = 'STPO'.
        APPEND L_FIELDCAT TO LT_FIELDCAT.
        L_FIELDCAT-COL_POS = 2.
        L_FIELDCAT-FIELDNAME = 'STLNR'.
        L_FIELDCAT-TABNAME = 'IT_STPO'.
        L_FIELDCAT-REF_FIELDNAME = 'STLNR'.
        L_FIELDCAT-REF_TABNAME = 'STPO'.
        APPEND L_FIELDCAT TO LT_FIELDCAT.
        L_FIELDCAT-COL_POS = 3.
        L_FIELDCAT-FIELDNAME = 'STLKN'.
        L_FIELDCAT-TABNAME = 'IT_STPO'.
        L_FIELDCAT-REF_FIELDNAME = 'STLKN'.
        L_FIELDCAT-REF_TABNAME = 'STPO'.
        APPEND L_FIELDCAT TO LT_FIELDCAT.
        L_FIELDCAT-COL_POS = 4.
        L_FIELDCAT-FIELDNAME = 'IDNRK'.
        L_FIELDCAT-TABNAME = 'IT_STPO'.
        L_FIELDCAT-REF_FIELDNAME = 'IDNRK'.
        L_FIELDCAT-REF_TABNAME = 'STPO'.
        APPEND L_FIELDCAT TO LT_FIELDCAT.
        L_FIELDCAT-COL_POS = 5.
        L_FIELDCAT-FIELDNAME = 'MENGE'.
        L_FIELDCAT-TABNAME = 'IT_STPO'.
        L_FIELDCAT-REF_FIELDNAME = 'MENGE'.
        L_FIELDCAT-REF_TABNAME = 'STPO'.
        APPEND L_FIELDCAT TO LT_FIELDCAT.
endform.                    " BUILD_FIELDCAT_BOM
*&      Form BUILD_LAYOUT_BOM
*      text
* --> p1        text
*<-- p2        text
form BUILD_LAYOUT_BOM .
CLEAR : LS_LAYOUT.
LS_LAYOUT-LIGHTS_FIELDNAME = 'LIGHTS'.
LS_LAYOUT-LIGHTS_TABNAME = 'IT_STPO'.
endform.                    " BUILD_LAYOUT_BOM
*&      Form DISPLAY_DATA_BOM
*       text
* --> p1        text
* <-- p2        text
form DISPLAY_DATA_BOM .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
*   I_INTERFACE_CHECK                 = ' '
*   I_BYPASSING_BUFFER                = ' '
*   I_BUFFER_ACTIVE                   = ' '
   I_CALLBACK_PROGRAM                = SY-REPID
*   I_CALLBACK_PF_STATUS_SET          = ' '
   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND_BOM'
   I_CALLBACK_TOP_OF_PAGE            = 'TOP9'
*   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*   I_CALLBACK_HTML_END_OF_LIST       = ' '
*   I_STRUCTURE_NAME                  =
   I_BACKGROUND_ID                   = 'ALV_BACKGROUND'
*   I_GRID_TITLE                      =
*   I_GRID_SETTINGS                   =
   IS_LAYOUT                         = LS_LAYOUT
   IT_FIELDCAT                       = LT_FIELDCAT
*   IT_EXCLUDING                      =
*   IT_SPECIAL_GROUPS                 =
*   IT_SORT                           =
*   IT_FILTER                         =
*   IS_SEL_HIDE                       =
*   I_DEFAULT                         = 'X'
*   I_SAVE                            = ' '
*   IS_VARIANT                        =
*   IT_EVENTS                         =
*   IT_EVENT_EXIT                     =
*   IS_PRINT                          =
*   IS_REPREP_ID                      =
*   I_SCREEN_START_COLUMN             = 0
*   I_SCREEN_START_LINE               = 0
*   I_SCREEN_END_COLUMN               = 0
*   I_SCREEN_END_LINE                 = 0
*   IT_ALV_GRAPHICS                   =
*   IT_HYPERLINK                      =
*   IT_ADD_FIELDCAT                   =
*   IT_EXCEPT_QINFO                   =
*   I_HTML_HEIGHT_TOP                 =
*   I_HTML_HEIGHT_END                 =
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER           =
*   ES_EXIT_CAUSED_BY_USER            =
TABLES
    t_outtab                          = IT_STPO
* EXCEPTIONS
*   PROGRAM_ERROR                     = 1
*   OTHERS                            = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " DISPLAY_DATA_BOM
FORM TOP9 .
CLEAR   LS_HEADER.
REFRESH LT_HEADER.
LS_HEADER-TYP = 'H'.
LS_HEADER-INFO = 'BILL OF MATERIALS'.
APPEND LS_HEADER TO LT_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
    IT_LIST_COMMENTARY       = LT_HEADER
   I_LOGO                   = 'ENJOYSAP_LOGO'
*   I_END_OF_LIST_GRID       =
ENDFORM.
FORM USER_COMMAND_BOM USING RF_UCOMM_BOM LIKE SY-UCOMM
                  SEL_FIELD TYPE SLIS_SELFIELD.
    CASE RF_UCOMM_BOM.
      WHEN '&IC1'.
      SET PARAMETER ID 'MAT' FIELD WA_STPO-IDNRK.
      SET PARAMETER ID 'WRK' FIELD WA_MAST-WERKS.
      SET PARAMETER ID 'CSA' FIELD WA_MAST-STLAN.
      CALL TRANSACTION 'CS03' AND SKIP FIRST SCREEN.
    ENDCASE.

How do I disable the drop down box which appears below the Search Box (which shows previous searches) when I start typing in my search topic

Hi I would like to know how to disable the drop down box which appears below the search box on the start page when I start to type in my search topic. If for example the first letter I type in is an S then it shows a list of previous searches of sites beginning with the letter S.

This is stored in the Firefox form history. For details of how to clear form history and prevent Firefox from storing any more form history see https://support.mozilla.com/kb/Form+autocomplete

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show pr

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show projects on it)? I tried backup & restore without success. I have also found the .psess files and copied them to the catalog in the new computer but when the sides shows are opened none of the images or music is there. Only the text that I entered shows. I have even tried to replicate the file paths from the XP computer to the new computer to see if that will help.

UPDATE: By a stroke of luck I happened to find a catalog link (a PSE8D file) in the 'My Catalog' file where the imported data was stored. When I clicked on it to investigate what is was 'magically' all of my transferred projects appeared in Organizer. Upon further investigation I found that the projects transferred from my XP computer were stored in a hidden catalog that had to be accessed through the Custom Location option in Catalog Manager (accessed by clicking File then Catalog then Custom Location). No Windows or Elements search revealed this fact. I am appreciative that I just got lucky. The Adode/Photoshop company was absolutely of no help. If fact to me their structure is designed to avoid contact with their customers unless you're buying a new product. Their products have many good features (even though user unfriendly) and it's a shame they don't value their customers more once the sale is completed.
Bottom line: All of the projects (sideshows) have been recovered and work in my new Windows 7 computer. I hope my experience helps others.

Scaling photos into Light Box or Slide show

I will look for a tutorial on this but...
I dont seem to be able to find a way that images (photos) of different sizes can be correctly displayed to size and proportion in a Light Box or Slide Show.
I have tried the "fit" and proportion" options to no avail. I thought these might auto scale the photos to fit but no luck.
Am I missing something or do these assets need to be created to size?
If so ...how does one determine the size? ( I looked for the size properties of the Lightbox "screen")

Thank you.
Not quite what I was hoping for but at least I know now.
How does one get a measure on the "image box"? (trial and error?)
I guess one needs to know so that one can create images scaled to that size or a tad smaller.
Thinking ...Maybe I just pick a size for images and then scale the box to fit in the design mode.

How do I get back 'Don't Show Again' dialogue boxes?

How do I get back 'Don't Show Again' dialogue boxes?
In particular:
I've got an interactive form with a 'Submit via Email' button. Normally, when you select this button you get two options:
1. Send via desktop email application (e.g. outlook)
2. Send via other email applications (e.g. hotmail)
Previously I've selected the 'don't show again' check box which defaults to the second option.
Now I'd like to select the first option but don't know how to get this dialogue box to come up again. How is this done?
Rachel Viski.

You can use "Edit => Preferences" and select the 'General' category, click on the 'Reset All Warnings' button, and click the 'OK' button to finish.

How do I delete more than 1 slide at a time from the custom slide show in Elements 8

How do I Delete more than 1 slide at a time from the custom slide show in Elements 8?

How to Mass Delete Emails from iPhone and iPad Inbox (with video)
http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
 Cheers, Tom

How to show only date in BO webi 3.1 text box

how to show only date in BO webi 3.1 text box for e.g:-
01/01/2005 (no time only date)

hi,
just check by which format your date is coming
just create a one variable and check =UserResponse("Transaction Date From (mm/dd/yy)")
if your output is in format of("mm/dd/yyyy hh:mm:ss a")
then some format we have to write in todate syntax
then your final formula for date would be
=FormatDate(ToDate(UserResponse("Transaction Date From (mm/dd/yy)");"mm/dd/yyyy hh:mm:ss A");"dd/mm/yyyy")

How can I access the savestore.js contents if the command about:sessionrestore shows a blank box even for already succesfully used backups?

-------------------------------------------------------------------------------------------------------------------------------------------
How can I access the savestore.js contents if the command about:sessionrestore shows a blank box even for already succesfully used backups?
Is there a recent known problem with the about:sessionrestore command or is there any other way understandable to Firefox 29.0.1 through which recover the information stored in the sessionstore.js files.
It seems the command about:sessionrestore is not capable anymore to read the contents of the sessionstore.js file present in the user profile folder.
The box where windows and tabs should be listed is empty.
I tried to paste a few old sessionstore.js files in the user directory while the firefox.exe process was not active, then opened Firefox again and tried to launch the about:sessionrestore command without any result.
I think the files are not corrupted because I used most of them in other occasions and I stored them in folders not connected to the common use of any process.
Also, I already successfully used the about:sessionrestore command in Firefox 29.0.1 in a few other occasions.
I did a "clean reinstall" of Firefox 29.0.1 and the box contained in the tab where about:sessionrestore is executed is still empty even if the files themselves contain such information as tabs location and html addresses.
After this I recovered the profile data I had stored in another folder and this is what you can see attached to this question.
---------------------------------------------------------------------------------------------------------

If I select the "show my windows and tabs from last time" option in the startup settings the contents of any savestore.js file i paste in the user profile folder are opened without any problem.
still, the box in the tab loaded by the about:sessionrestore command is blank and empty, so it's not possible to "de-select" any window or tab. it's necessary to find an editor to modify session backup files which may contain "bad addresses".
does such an editor already exists?

How to stop the dock from showing all hidden images when hiding then showing applications

How to stop the dock from showing all hidden images when hiding then showing applications

It's not really something to snap a screen shot of. I believe it would need to be a video clip. For instance, when I am working on multiple images in Photoshop, I often need many images open at the same time, but I only have one image viewable and active. The hero image is active on screen while I hide the other images in the dock by hitting the yellow - button on the images. Then I "Hide" Photoshop to do something in the Finder. When I go back to Photoshop, every image that is hidden in the dock will pop open again in the active window, not just the image I was currently working on. I want these images to stay in the dock until I need them, no matter how many times I Hide the Show Photoshop.

How to show previously hidden box on slide start?

Similar Messages

Maybe you are looking for