DVD Build Process Fails

I am using DVD Studio Pro 4.0.3 and I have attempted the Build process on my project several times but the progress bar never gets past 0%. But DVD Studio Pro never crashes or even hangs. What I have noticed, upon looking under the name column in the activity moniter is "DSPX_AEncoderServer (Not Responding)". Although I don't know much about this app, I assume it is essential to the build process.
Several months ago, I was able to burn a DVD from a simpler version of this project. Things that have NOT changed are that the Main Feature is about ten minutes long and also certain menus and screens are based on unrendered Motion files. What has changed is that two more unrendered Motion menus have been added and one of these has become very complex, containing several video windows such as you might see from a DVD Chapter Selection Screen.
I had assumed these Motion files would be rendered as part of the DVD Build as they were in my original version of this project. I assumed that was the best approach to avoid artifacts. The Motion files run quite sluggishly however and I am concerned that perhaps they are overloading the processor and causing the encode process to crash. Do you think that the best way to resolve this issue would be to first render these Motion files as Quicktime using the Animation Codec and then replace the Motion files with the Quicktime files, Before going through this, I just wanted another opinion as to whether there was anything I had overlooked.
Thank you so very much for any suggestions you may be able to offer.
Julianna

Thanks for your advice. I'm just not sure I understand what application to use to convert a Quicktime file into an m2v. Are you also saying that motion files aren't supposed to be directly imported into DVD SP? Would I choose the CODEC for DVD Best Quality? After encoding, do I move the old files and relink to the encoded files? I'm somewhat new at this, a little more explaination would be very helpful. Thanks so much.
Usuallly the best way in general is to encode
everything you can outside of DVD SP (Compressor,
bitVice, etc.) to m2vs and AC3s and then bring those
assets in - often stalls on builds can be cured by
that.
G5 2.5Ghz Dual Processor   Mac OS X (10.4.8)   2GB RAM, 9800 Pro Video Card

Similar Messages

  • PGC Internal Software Error During DVD Build

    After weeks of editing my 77-minute feature and days of DVD authoring effort, it's more than a bummer to see this appear during the final DVD build process:
    PGC "Analysis" has an error at 47:21:29 internal software error %0 line . . . PGC Info; name=Analysis, ref FPGE time 47:21:29.
    I verified the project before the build and there were no errors/warnings. I tried several times and get the same error at the same spot; I tried creating an image and the same error takes place at the same spot. I previewed the entire thing in Encore and everything plays/sounds great. All the footage/sound was imported as two large, uncompressed DVI files exported from PPro 2.0. The video is 16:9, 24p. Most of the sound came straight from the source video feed, except for two WAV files containing theme music.
    What can I do to get this production finished-- of course, I am behind schedule...

    So, finally I've found the source of the problem and a workaround!
    First the source:
    when Encore has to transcode a video it must corrupt the file, because it's the transcoded file that causes the problem, I tried this by importing a transcoded file into Encore 1.5 there it came with the same error.
    Now the workaround, ok maybe it isn't quite a workaround but it's a way to go:
    What I did was: I built my project new in Encore 1.5, because Encore 2.0 has a problem importing the videos by me, but if you would just import the videos in 1.5 and let 1.5 transcode them so that all of them would fit on a DVD you should be able to import the transcoded files in CS3 and it should work, no guarantee.
    Other possibility: try opening your project in encore 2.0 and re import your videos there and let 2.0 do all of the transcoding, that might work too!
    But for certain: don't let encore CS3 do all the transcoding!
    I'm working with PAL files I don't know if it will be the same by NTSC, but it's worth a try!
    If anybody feels like reproducing the bug, here is the way to do it:
    Make a project in Encore CS3 and import Videos encoded by premiere as MPG2-DVD (I think: .m2v .wav) and set the transcoding options to automatic, encore should have to transcode the files. Then let encore make the DVD, at some point you should get that nice PGC error!

  • HT6196 When I try to "share" my movie project via "File" the process "fails after a short while.  I do not know why this is happening.  I want to send my movie file to IDVD so I can burn a DVD disc of my project.

    When I try to "share" my IMovie project via "File", the process "fails", after a short time.  I am following the instuctions;  Click share>file>next > except it hasn't download to save.  The blue circle never completes its circle before I says it failed.  What am I doing wrong?

    Are you trying to transfer it from the iPad to your desktop?  Have you tried AirDrop?

  • BPEL process fails in SOA (in UNIX), but works fine in SOA (in Windows) env

    Hello,
    BPEL process fails in SOA (in UNIX), but works fine in SOA (in Windows) environment
    Step 1: Build a asynchronous BPEL process which has no extra node. Make and deploy it in 'local windows desktop SOA' server
    The BPEL process has three nodes:
    a. client - on the left side of the swim lane
    b. receiveInput - first node in swim lane (client calls 'receiveInput')
    c. callbackClient - second and last node in the swim lane ('callbackClient' calls client)
    Step 2: Go to BPEL console and 'Initiate' the BPEL process -> 'Post XML Message'
    Step 3: Now, I can see the successfully completed BPEL instance in the BPEL console.
    Now,
    Step 4: Deploy the same BPEL process (dummy asynchronous) in the SOA server (hosted in unix box)
    Step 5: Go to BPEL console and 'Initiate' the BPEL process -> 'Post XML Message'
    Step 6: I find that the BPEL instance appears to have ended in error (on the second node i.e. callbackClient )
    With the following error message
    +<invalidVariables xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>9710</code>+
    +</part><part name="summary"><summary>Invalid xml document.+
    According to the xml schemas, the xml document is invalid. The reason is: Error::cvc-complex-type.2.4.b: The content of element 'DummyBPELProcessProcessResponse' is not complete. One of '{"http://xmlns.oracle.com/DummyBPELProcess":result}' is expected.
    Please make sure that the xml document is valid against your schemas.
    +</summary>+
    +</part></invalidVariables>+
    Has anyone faced similar issue as above ?
    i.e. process works find in windows environment (local SOA), but fails in SOA server in UNIX environment
    Appreciate your help in understanding this issue.
    Thanks,
    Santhosh

    Hello,
    The fix to this issue appears to have been as follows:
    +<schema attributeFormDefault="unqualified"+
    +     elementFormDefault="qualified"+
    +     targetNamespace="http://xmlns.oracle.com/DummyBPELProcess"+
    +     xmlns="http://www.w3.org/2001/XMLSchema">+
    +     <element name="DummyBPELProcessProcessRequest">+
    +          <complexType>+
    +               <sequence>+
    +                    <element name="input" type="string"/>+
    +               </sequence>+
    +          </complexType>+
    +     </element>+
    +     <element name="DummyBPELProcessProcessResponse">+
    +          <complexType>+
    +               <sequence>+
    +                    <element name="*:result*" type="string"/>+
    +               </sequence>+
    +          </complexType>+
    +     </element>+
    +</schema>+
    In DummyBPELProcess.xsd,
    modifiying "result" to ":result" appears to have resolved the issue in SOA under unix environment.
    If anyone can explain why "result" works in SOA under windows and ":result" works in SOA under unix environment, I would really appreciate your help.
    Thanks,
    Santhosh

  • Build process aborting due to following error

    I should also probably add that machines usually build fine, it's only been with this new batch of PCs that the build has been failing.

    So I'm trying to build a machine over the network, (the operating system I'm installing is Windows 7 Professional) however I'm getting this error message when building a machine from our new batch of PCs;
    'Build process aborting due to following error:
    Disk partitioning/formatting exception: VDS API
    IVdsCreatePartitionEz::CreatePartitionEx returned 0x80042571 size = 45788 MB,
    offset = 1 MB, format = 39'
    Any suggestions greatly appreciated.
    This topic first appeared in the Spiceworks Community

  • Compaq CQ56 154 laptop windows 7 recovery process fails. PLEASE HELP

    Compaq CQ56 laptop windows 7 recovery process fails because RM component runtime and no valid RP index. PLEASE HELP
    I have tried the recovery process on this laptop over 10 times now and with multiple new hdds and it seems like it comes to a fail at the very end.I have posted the error log that I get. Please help me out in regards to this. 
    The process completes unit and at the very end the error log gives this:
    Error encountered during RM component run time            
    Please contact RM team for investigation            
                        CopyRight @   SRD.cpp :   12                      CopyRight @   SRD.cpp :   13 SRD 1.1.0.0115 System Recovery Deployment, provided by CyberLink. (cNB)       
                        CopyRight @    SRD.cpp :  14           DeployRp:etSRDMode @ DeployRp.cpp : 3571 SetSRDMode 1          
                            wmain @    SRD.cpp :  73 Executing call 'L"drp.SetConfigIni('deployrp.ini')"'        
            DeployRp:etectMedia @ DeployRp.cpp :  371 Start to detect disks ...         
                  DeployRp:etUp @ DeployRp.cpp :  630 Get User Partition drive letter : c.        
            DeployRp:etectMedia @ DeployRp.cpp :  563 Disk Index : [HDD] 0, [N/A] -1         
          DeployRp:etTargetDisk @ DeployRp.cpp :  571 Start to load ini ...          
                  DeployRp:etUp @ DeployRp.cpp :  630 Get User Partition drive letter : c.        
                 DeployRp:etBp @ DeployRp.cpp :  643 Start to find Build Partition drive letter.        
                  DeployRp:etBp @ DeployRp.cpp :  650 Build Partition drive letter : c.         
          BuildConfig::LoadConfig @ BuildConfig.cpp :   28 Loading C:\RM\Tools\DeployRP\build.ini ...        
          BuildConfig::LoadConfig @ BuildConfig.cpp :  111 C:\RM\Tools\DeployRP\build.ini loading complete.       
                            wmain @    SRD.cpp :  83 Executing call 'L"drp.LoadBuildIni()"'         
           DeployRp::CheckRpExist @ DeployRp.cpp :  713 Start to check whether Rp exists.        
           DeployRp::CheckRpExist @ DeployRp.cpp :  750 Recovery Partition doesn't exist.        
    DeployRp::CheckSystemRecoveryDoneFlag @ DeployRp.cpp : 757 Start to check whether SystemRecoveryDone.flg exists.     
    DeployRp::CheckSystemRecoveryDoneFlag @ DeployRp.cpp : 794 SystemRecoveryDone.flg doesn't exist.      
           DeployRp::InstallMSXML @ DeployRp.cpp : 1248 Start to install MSXML6.dll         
           DeployRp::InstallMSXML @ DeployRp.cpp : 1292 Install MSXML6.DLL complete.        
          DeployRp::CreateLangIni @ DeployRp.cpp :  331 Create Lang.ini command: C:\RM\Tools\DeployRP\CreateLangIni.exe c     
         DeployRp::CheckSSRDFlags @ DeployRp.cpp : 1044 Start to check if SSRD flags exist        
         DeployRp::CheckSSRDFlags @ DeployRp.cpp : 1061 SSRD flags do not exist         
         DeployRp::CheckSSRDFlags @ DeployRp.cpp : 1063 Check if SSRD flags exist complete        
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1363 Creating BootRM.wim ...         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1374 Start to do setting.         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1377 SetWimImageDstPath.         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1382 Check tool existence.         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1385 Tool Path: c:\RM\Tools\opktools\dism.exe       
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1389 Dism.exe exists.         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1392 SetWimMountPath.         
        CWimMgr:etWimMountPath @ WimMgr.cpp :  199 Wim File Mounting Path = C:\RM\Tools\DeployRP\mount\      
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1397 SetLanguagePacksPath.         
       DeployRp::CreateBootRMWim @ DeployRp.cpp : 1402 SetToolsPath.          
            CWimMgr:etToolsPath @ WimMgr.cpp :  213 [SetToolsPath] lpszToolsPath = c:\RM\Tools\opktools\      
          CWimMgr:etToolsPath @ WimMgr.cpp :  220 [SetToolsPath] m_szDISMExeFullPath = c:\RM\Tools\opktools\dism.exe     
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1406 Setting complete.         
       DeployRp::CreateBootRMWim @ DeployRp.cpp : 1411 Start to do Initialization.         
             CWimMgr::InitWimMgr @ WimMgr.cpp :  358 Windows PE Source Path = c:\RM\RP\sources\boot.wim      
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1420 Initialization complete.         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1423 Start to mount WIM image.        
           CWimMgr::MountWimImage @ WimMgr.cpp :  437 Temp Working Path = C:\RM\Tools\DeployRP\temp\      
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1426 Mount WIM image complete.        
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1431 Start to setup language packs...        
       DeployRp::GetSupportedLang @ DeployRp.cpp : 1639 Lang.ini path: c:\RM\Tools\DeployRp\lang.ini       
       DeployRp::GetSupportedLang @ DeployRp.cpp : 1678 Supported Languages :           
        CWimMgr:etWinPELanguage @ WimMgr.cpp : 1134 CWimMgr:etWinPELanguage - Enter       
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1437 Setup language packs complete.        
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1443 Start to setup tool's language packages...       
            CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-setup.cab   
            CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-Scripting.cab   
            CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-SRT.cab   
            CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-WMI.cab   
            CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-wds-tools.cab   
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1450 Setup tool's language packages complete.       
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1452 Start to un-mount WIM image...        
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1455 Un-mount WIM Image complete.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1696 Start to estimate recovery partition size ...       
            DeployRp::CalculateRp @ DeployRp.cpp : 1709 base.wim.wim size : 12452203405 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1725 install.log file size : 623780 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1735 WinRE and WinPe files size : 281055618 bytes.       
            DeployRp::CalculateRp @ DeployRp.cpp : 1740 RM Software size : 63933517 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1745 BootRM.wim size : 268793098 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1750 Patch Folder size : 369308088 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1755 File4Rp Folder size : 0 bytes.         
            DeployRp::CalculateRp @ DeployRp.cpp : 1761 Extra space : 2371154178 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1766 Prevented Extra size : 0 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1776 Recovery Partition estimated size : 15807695464 bytes.      
            DeployRp::CalculateRp @ DeployRp.cpp : 1777 Recovery partition estimation complete.        
               DeployRp::CreateRp @ DeployRp.cpp : 2072 Start to create recovery partition ...        
                    DetToolRpInfo @ DeployRp.cpp :  122 PartitionCount: 4. PartitionType: 0. PartitionNumber: 0. PartitionStartAddr: 0 bytes. PartitionLength: 0 bytes  
                    DetToolRpInfo @ DeployRp.cpp :  122 PartitionCount: 4. PartitionType: 12. PartitionNumber: 3. PartitionStartAddr: 79917219840 bytes. PartitionLength: 108093440 bytes
                    DetToolRpInfo @ DeployRp.cpp :  122 PartitionCount: 4. PartitionType: 7. PartitionNumber: 2. PartitionStartAddr: 209715200 bytes. PartitionLength: 73013395456 bytes
                    DetToolRpInfo @ DeployRp.cpp :  122 PartitionCount: 4. PartitionType: 7. PartitionNumber: 1. PartitionStartAddr: 1048576 bytes. PartitionLength: 208666624 bytes
                    DetToolRpInfo @ DeployRp.cpp :  156 Can't find valid Rp index.         
               DeployRp::CreateRp @ DeployRp.cpp : 2090 Invalid Rp index          
                            wmain @    SRD.cpp :  93 Executing call 'L"drp.Deploy()"'         
                            wmain @    SRD.cpp :  38 Output            
    ERROR: call L"drp.Deploy()" failed.             
                           wmain @    SRD.cpp :  38 Output - Returned HRESULT = 0xe0ef002f    

    Hello k877
    I am sorry to hear you are having issues reinstalling your operating system. I am providing you with a link here to a document titled Recovery Disk Creation Error Codes (Windows 7). Now document is for creating the recovery disks but the error is showing up in your error log (0xe0ef002f). The error according to the document is the File/directory does not exist. It looks like a function call Deploy() is attempting to access this File/directory and is unable to.
    This leads me to think that it is the disks that you are using. It would stand to reason anyways as you state you have tried this on multiple hard drives. A good test would be to check to see if your error in the error log is the same every time. If it is happening at the same point each time then simply order a new set of discs from here.
    I hope this resolves your installation issue. Thank you for posting your question on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Build status failed - no Errors

    Hi,
    I'm strugling a build definition which beeing set as "Failed" though no error is reported in the log. Any idea?
    THX

    Hi ShamsiyanAlbert,
    I'd like to know the TFS version and whether you have customized your build process template. However, you can set logging verbosity to "Diagnostic" in your build definition to check the detailed build log.
    You can also have a try on othe build agent machines to see if it works fine. Or customize the build process template to handle the build errors. Check this blog for more information about how to customize build process template to handle errors:
    http://geekswithblogs.net/jakob/archive/2012/02/01/handling-warnings-and-errors-with-invokeprocess-in-tfs-2010-build.aspx
    If you have any othe concerns, please let us know more details about your scenario including the settings of your build definition and reproduce steps.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error -: AIP-18506: Configuration Builder rollback failed for configuration

    Hi B2B gurus,
    Everytime while i deploying a Config, its throwing a below error
    Error -: AIP-18506: Configuration Builder rollback failed for configuration null for business process null
    I changed the config ID still i am getting the same error.deleted the agreement, still same error its thorwing of.
    regards

    Hi,
    It's great to hear that your problem is solved now and you got the root cause of it.
    Can you please mark all your threads as answred, for which you have got the solution, and award points to the person who has helped you finding the solution as appropriate? It would help us to help everyone in better way.
    It would be great if you can share the solution in the respective forums for the sake of benefit of other users of this forum. (You can find the threads raised by you, by clicking your user name --> Recent Questions)
    Thanks & Regards,
    Anuj

  • Error:AIP-18506: Configuration Builder rollback failed for configurations n

    Hi All
    While creating a deployement , i am getting below error,
    please help me
    Error:AIP-18506: Configuration Builder rollback failed for configurations null for business process null
    regards
    suni

    Hi Anuj,
    Thanks for your response, Now i getting a new error.
    I am getting the below error, while i am deploying the configurations.
    AIP-11016:SQL
    please find the below errors
    2009.07.29 at 06:38:54:371: B2BStarter thread: B2B - (DEBUG) B2BStarter - Current list is empty. Shutdown B2B
    2009.07.29 at 06:38:54:372: B2BStarter thread: B2B - (DEBUG) B2BStarter - Shutdown B2B
    2009.07.29 at 06:38:54:405: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:shutdown Enter
    2009.07.29 at 06:38:54:407: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:shutdown Exit
    2009.07.29 at 06:38:54:409: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:shutdown Shutdown B2B server start
    2009.07.29 at 06:38:54:464: Thread-18: BusinessLogicLayer - (ERROR) caught error: Closed Connection
    2009.07.29 at 06:38:54:468: Thread-18: IP - (ERROR) java.sql.SQLException: Closed Connection
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:239)
         at oracle.jdbc.driver.PhysicalConnection.rollback(PhysicalConnection.java:1259)
         at oracle.jdbc.OracleConnectionWrapper.rollback(OracleConnectionWrapper.java:90)
         at oracle.tip.repos.core.driver.CatalogDriver.disconnect(CatalogDriver.java:1662)
         at oracle.tip.repos.core.persistency.PersistencyService.disconnect(PersistencyService.java:578)
         at oracle.tip.buslogic.common.ExecutionContextImpl.disconnectService(ExecutionContextImpl.java:602)
         at oracle.tip.buslogic.common.ExecutionContextManager.closeLongRunningContext(ExecutionContextManager.java:511)
         at oracle.tip.adapter.b2b.data.B2BExecutionContext.close(B2BExecutionContext.java:208)
         at oracle.tip.adapter.b2b.data.DBContext.shutdown(DBContext.java:141)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:455)
         at java.lang.Thread.run(Thread.java:534)
    2009.07.29 at 06:38:54:469: Thread-18: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread end ignore exception
    2009.07.29 at 06:38:54:471: Thread-18: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread end
    2009.07.29 at 06:38:55:426: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:shutdown Shutdown Transport and App Transport
    2009.07.29 at 06:38:55:428: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B Server shutdown
    2009.07.29 at 06:40:25:439: B2BStarter thread: B2B - (DEBUG) B2BStarter - Context Initialized
    2009.07.29 at 06:40:25:573: B2BStarter thread: B2B - (DEBUG) B2BStarter - Start B2B
    2009.07.29 at 06:40:25:767: B2BStarter thread: B2B - (DEBUG) B2BStarter - Starting B2B
    2009.07.29 at 06:40:25:873: B2BStarter thread: B2B - (DEBUG) B2BStarter - configuration obtained
    2009.07.29 at 06:40:26:079: B2BStarter thread: B2B - (DEBUG) B2BStarter - clear global cache
    2009.07.29 at 06:40:26:149: B2BStarter thread: B2B - (DEBUG) XEngine is already started. So clear cached objects inside XEngine.
    2009.07.29 at 06:40:26:181: B2BStarter thread: B2B - (INFORMATION) Repository:print: [0] HL7 over MLLP Exchange
    2009.07.29 at 06:40:26:185: B2BStarter thread: B2B - (INFORMATION) Repository:print: [1] EDI X12 over AS1
    2009.07.29 at 06:40:26:189: B2BStarter thread: B2B - (INFORMATION) Repository:print: [2] Custom Document over Generic Exchange
    2009.07.29 at 06:40:26:195: B2BStarter thread: B2B - (INFORMATION) Repository:print: [3] EDI EDIFACT over Generic Exchange
    2009.07.29 at 06:40:26:198: B2BStarter thread: B2B - (INFORMATION) Repository:print: [4] EDI X12 over Generic Exchange
    2009.07.29 at 06:40:26:204: B2BStarter thread: B2B - (INFORMATION) Repository:print: [5] RosettaNet over RNIF
    2009.07.29 at 06:40:26:208: B2BStarter thread: B2B - (INFORMATION) Repository:print: [6] Custom Document over MLLP Exchange
    2009.07.29 at 06:40:26:213: B2BStarter thread: B2B - (INFORMATION) Repository:print: [7] Custom Document over AS1
    2009.07.29 at 06:40:26:218: B2BStarter thread: B2B - (INFORMATION) Repository:print: [8] EDI EDIFACT over AS1
    2009.07.29 at 06:40:26:222: B2BStarter thread: B2B - (INFORMATION) Repository:print: [9] HL7 over Generic Exchange
    2009.07.29 at 06:40:26:227: B2BStarter thread: B2B - (INFORMATION) Repository:print: [10] Custom Document over ebMS
    2009.07.29 at 06:40:26:233: B2BStarter thread: B2B - (INFORMATION) Repository:print: [11] Custom Document over Internet
    2009.07.29 at 06:40:26:239: B2BStarter thread: B2B - (INFORMATION) Repository:print: [12] EDI X12 over Internet
    2009.07.29 at 06:40:26:245: B2BStarter thread: B2B - (INFORMATION) Repository:print: [13] EDI EDIFACT over Internet
    2009.07.29 at 06:40:26:690: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Enter
    2009.07.29 at 06:40:27:125: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Exit
    2009.07.29 at 06:40:27:126: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Enter
    2009.07.29 at 06:40:27:130: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize resetListener = true
    2009.07.29 at 06:40:27:133: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initdcx = true
    2009.07.29 at 06:40:27:135: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize TPAProcessor
    2009.07.29 at 06:40:27:137: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Clear TPA Cache
    2009.07.29 at 06:40:27:141: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize DataContext. Pool Size 0
    2009.07.29 at 06:40:27:143: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Treat Response as Request = false
    2009.07.29 at 06:40:27:145: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Exit
    2009.07.29 at 06:40:27:148: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize Transport
    2009.07.29 at 06:40:27:150: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Transport LogLevel = DEBUG
    2009.07.29 at 06:40:27:304: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: Putting http://localhost
    2009.07.29 at 06:40:27:309: B2BStarter thread: B2B - (INFORMATION) oracle.tip.adapter.b2b.transport.TransportInterface:initialize: Props: http://localhost transport_callout_waittime = 30
    port = 12001
    PROTOCOL_ENDPOINT = null
    2009.07.29 at 06:40:27:320: B2BStarter thread: B2B - (DEBUG) initialize TransportReceiver: [Emerson_Test_AS2_TransportServer < http > < Emerson >]
    2009.07.29 at 06:40:27:797: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize AppTransport LogLevel = ERROR
    2009.07.29 at 06:40:27:865: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
    2009.07.29 at 06:40:27:869: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
    2009.07.29 at 06:40:27:875: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
    2009.07.29 at 06:40:27:879: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
    2009.07.29 at 06:40:27:883: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B initialized
    2009.07.29 at 06:40:29:214: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
    2009.07.29 at 06:40:29:297: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned on, will listen on IP_OUT_QUEUE for messages
    2009.07.29 at 06:40:29:380: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
    UI LOG:
    2009.07.29 at 04:54:58:859: DEPLOYMENT_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-20011: Inserting into runtime table TIP_DocumentType_rt failed
    ORA-06512: at "B2B.IP_DEPLOY", line 3942
    ORA-00001: unique constraint (B2B.TIP_DOCUMENTTYPE_RT_RUK) violated
    ORA-06512: at line 1
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
         at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
         at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
         at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
         at oracle.tip.deploy.DeploymentManager.deployObjectInRuntimeSchema(DeploymentManager.java:1067)
         at oracle.tip.deploy.DeploymentManager.run(DeploymentManager.java:419)
         at java.lang.Thread.run(Thread.java:534)
    2009.07.29 at 06:38:06:010: Thread-46: Repository - (ERROR) Error -: AIP-11015: Object does not exist 629FF62EB2D55C7BE04400144F873925-27-1-30
         at oracle.tip.repos.core.driver.CatalogDriver.getObject(CatalogDriver.java:759)
         at oracle.tip.repos.core.driver.AssociationList.get(AssociationList.java:70)
         at oracle.tip.buslogic.validation.rules.TradingPartnerCollectionRules.rule7_2(TradingPartnerCollectionRules.java:168)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at oracle.tip.buslogic.validation.ModelValidationEngineImpl.invokeMethod(ModelValidationEngineImpl.java:1349)
         at oracle.tip.buslogic.validation.ModelValidationEngineImpl.invokeMethod(ModelValidationEngineImpl.java:1325)
         at oracle.tip.buslogic.validation.ModelValidationEngineImpl.validate(ModelValidationEngineImpl.java:1212)
         at oracle.tip.buslogic.validation.ModelValidationEngineImpl.validateDeployableBusinessObjects(ModelValidationEngineImpl.java:296)
         at oracle.tip.buslogic.validation.ModelValidationEngineImpl.validateDeployableBusinessObjectsAgreement(ModelValidationEngineImpl.java:272)
         at oracle.tip.configuration.B2BConfigurationBuilder.run(B2BConfigurationBuilder.java:492)
         at java.lang.Thread.run(Thread.java:534)
    2009.07.29 at 06:38:56:895: DEPLOYMENT_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-20011: Inserting into runtime table TIP_DocumentType_rt failed
    ORA-06512: at "B2B.IP_DEPLOY", line 3942
    ORA-00001: unique constraint (B2B.TIP_DOCUMENTTYPE_RT_RUK) violated
    ORA-06512: at line 1
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
         at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
         at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
         at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
         at oracle.tip.deploy.DeploymentManager.deployObjectInRuntimeSchema(DeploymentManager.java:1067)
         at oracle.tip.deploy.DeploymentManager.run(DeploymentManager.java:419)
         at java.lang.Thread.run(Thread.java:534)
    2009.07.29 at 06:41:05:932: PURGE_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-02431: cannot disable constraint (TIP_ATTACHMENTSTORAGE_RFK) - no such constraint
    ORA-06512: at "B2B.IP_PURGE", line 107
    ORA-06512: at line 1
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
         at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
         at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
         at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
         at oracle.tip.repos.purge.PurgeManager.disableConstraints(PurgeManager.java:706)
         at oracle.tip.repos.purge.PurgeManager.purgeConfiguration(PurgeManager.java:836)
         at oracle.tip.repos.purge.PurgeManager.doPurge(PurgeManager.java:475)
         at oracle.tip.repos.purge.PurgeManager.run(PurgeManager.java:381)
         at java.lang.Thread.run(Thread.java:534)
    2009.07.29 at 06:41:07:927: PURGE_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-02430: cannot enable constraint (TIP_ATTACHMENTSTORAGE_RFK) - no such constraint
    ORA-06512: at "B2B.IP_PURGE", line 47
    ORA-06512: at line 1
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
         at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
         at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
         at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
         at oracle.tip.repos.purge.PurgeManager.enableConstraints(PurgeManager.java:728)
         at oracle.tip.repos.purge.PurgeManager.purgeConfiguration(PurgeManager.java:870)
         at oracle.tip.repos.purge.PurgeManager.doPurge(PurgeManager.java:475)
         at oracle.tip.repos.purge.PurgeManager.run(PurgeManager.java:381)
         at java.lang.Thread.run(Thread.java:534)
    2009.07.29 at 06:41:07:931: PURGE_MANAGER_THREAD: Repository - (ERROR) PurgeManager: Purge op failed
    2009.07.29 at 06:41:07:933: PURGE_MANAGER_THREAD: Repository - (ERROR) PurgeManager: PurgeManager failed: Error -: AIP-11016: SQL error: java.sql.SQLException: ORA-02430: cannot enable constraint (TIP_ATTACHMENTSTORAGE_RFK) - no such constraint
    ORA-06512: at "B2B.IP_PURGE", line 47
    ORA-06512: at line 1
    2009.07.29 at 06:46:50:646: DEPLOYMENT_MANAGER_THREAD: Repository - (ERROR) java.sql.SQLException: ORA-20011: Inserting into runtime table TIP_DocumentType_rt failed
    ORA-06512: at "B2B.IP_DEPLOY", line 3942
    ORA-00001: unique constraint (B2B.TIP_DOCUMENTTYPE_RT_RUK) violated
    ORA-06512: at line 1
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:315)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:281)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:638)
         at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:183)
         at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:872)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3000)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3073)
         at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4308)
         at oracle.tip.deploy.DeploymentManager.deployObjectInRuntimeSchema(DeploymentManager.java:1067)
         at oracle.tip.deploy.DeploymentManager.run(DeploymentManager.java:419)
         at java.lang.Thread.run(Thread.java:534)

  • Why "Burning process failed"?

    I got this error message "burning process failed". Any reason?
    1) I got the right DVD disc for burning.
    2) It rendered all the way till it finished processing the movies.
    3) The moment it reached Burn, I have this error message.
    This is so frustrating. Why?

    Sorry if this sounds like a dumb suggestion, but have you put the DVD into a separate DVD player and see if it played? I get error messeges on my Mac that says the program quit unexpectedly, even though I told it to quit the instant earlier. Sometimes it just forgets or something, who knows.
    If this playing somewhere else doesn't work, then sorry, but I'm not familiar enough with the program to be able to tell.

  • Message processing failed if we receive attachments via E-Mail

    Dear ladies and gentlemen,
    we have follow proccess:
    We get some e-mails with an attachment. The E-Mail pick up the messages and send it to an RFC Channel.
    I changed the payload via the localejbs/AF_Modules/PayloadSwapBean :
    localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean TRANSFORM
    and the module configuration looks follow:
    TRANSFORM swap.keyName payload-name
    TRANSOFRM swap.keyValue MailAttachment-1
    it looks good and the payload would be swapped okay, and the mapping is also okay.
    But if we push the message to the RFC Adapter I get follow error message back:
    Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
    So now my question: If is possible, that the adapter try to send also the Body of this E-Mail to the target system ? Because the
    Message ID is the ID from the payload of the E-Mail Body.
    It is possible to keep away the E-Mail Body from the payload?
    Because we need only the attachment. Or if I I have to setup via Bean anything in the RFC Adapter ?
    Thanks
    Kind reagards
    Stephan Kohler
    P.S. The PI System is an PI 7.1, the target system would be an R/3 4.6.  I haven't  any success with the RFC Adatper version 7.10 or 6.40

    > Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
    >
    Is your attachment an XML? Is this XML structure is same as what you mapping source is? If that is the case, it should be okay. Is this interface working for non-mail sender? You might want to re-import the RFC structure in to PI again.
    VJ

  • How do setup FlexUnit in your CI build process on 64-Bit Linux

    Hello everyone. I am trying to setup FlexUnit in my build process and am using Rackspace cloud servers for my build server. I only have the option of Linux 64 bit distros or Windows 32b/64b. I started setting up and configuring everything on Linux but ran into problems installing the required stand alone player for test execution using FlexUnit. There is no 64-bit linux compatitble version of the stand alone player. In configuring the system to use the browser plugin on the machine instead of the stand alone player for executing the tests, I then get a manual interaction component which doesn't fit well with an automated CI build.
    Am I the only person out there trying to integrate FlexUnit into my CI process on a 64b Linux machine? Any pointers, tips, workarounds or general hypothetical ideas would be great!

    @mbbender - Answers below:
    > I have been able to get the Flash Plugin working in a browser on my 64b Ubuntu 10.4 system. However, from my understanding I can not use the flash plugin from a browser to properly execute a headless execution of my tests during the CI process. To execute the tests as part of the CI process I need the Flash Stand Alone Player.
    -- As of FlexUnit 4.1-beta2, you have the option of executing your tests using the stand-alone debug Flash Player using the default mechanism to launch that player or using a custom command, which could potentially point to the browser.  Check out the docs on the Ant task @ http://docs.flexunit.org/index.php?title=Ant_Task#Usage and the sample CI build using a browser @ http://github.com/flexunit/flexunit/blob/master/FlexUnit4SampleCIProject/build.browser.xml for more details on how to do this.
    > Are you saying that I can somehow use the Flash Plugin dependencies to install the Flash Stand Alone Player? If so, would I then need a 32b emulator wrapper for running the Stand Alone Player?  Or, are you suggesting that I can somehow use the Flash Plugin in the browser to do what I need to execute my tests during the Hudson build?
    -- Although I'm not a savvy Linux admin, it's my understanding that recent 64-bit Linux distros can execute 32-bit applications as well as 64-bit applications.  The only req I'm aware of is that the 32-bit version of the dependencies must be available.  In this case, executing the 32-bit version of the SA player should work from what I understand.
    > Do you have a CI build process setup on a Linux 64b CentOS system with FlexUnit? To be honest, I'm more concerned with the end result right now than learning how to do it on my own and would like to know if you can potentially help me get this done a little quicker if you are interested.
    -- I currently have a setup using 64-bit CentOS and running the 32-bit SA player, although it's not on Adobe's proper list of supported OSes.  We've worked with other folks who have the 32-bit SA player running with FlexUnit on Ubuntu 64-bit.  There was some feedback on some issues using older versions of openSUSE, but I don't know too many details re: the problem.
    Hope this helps.
    -Brian

  • Error in external tax system: SAX processing failed on input stream SAX pro

    Hi
    When I was posted in T.Code: FB70,  (Customer Invoice) I am getting below mentioned error.
    Error in external tax system: SAX processing failed on input stream SAX processi.
    I put tick mark on calculate Tax column and select O1(A/R Sales Taxable).
    Pls. help me.
    Thanks
    Ranjith

    Hi Ranjith,
    I also face this problem in Production now.
    Could you kindly share with me how you resolved this issue?
    Thanks,
    Markus

  • Message processing failed, FTP Receiver Adapter error...

    Hello all,
    We have a Idoc to File(FTP) scenario using PI.
    When PI try to send the file out to the FTP site, we get the following message in the communication channel monitoring and the file never reach the FTP site:
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Connection timed out: connect
    When we look at the detail display, we can see that the connection as been establish with the FTP site but the adapter is unable to deliver the file...
    Any Idea why?
    Thanks in advance.

    Hi ,
    There are two things that you can do
    1- check the connection of FTP from command prompt. If it is acceebile from command prompt then check for authorization that wether you have access to post the file at FTP or not (Full access READ , WRITE and EXCECUTE)
    2- in your adpater change the connection mode from Per file transfer to "Permanent".
    Please feel free to reply on this thread if you are not able to.
    Thanks

  • Upgrading Stellent 7.5 to OCS 10gR3 Import Process failing HELP NEEDED

    Hi,
    I am upgrading Stellent 7.5 to Oracle COntent Server 10gR3. Here is what I have done.
    1. Migrated all the configuration from Stellent to 10gR3
    2. Migrated the Folders from Stellent to 10gR3
    3. Migrated the content by creating an Archive and then importing the Archive in 10gR3.
    I am seeing lot of errors in the log file. Following are the errors I see in the log file.
    1.
    Could not send mail message from (null) with subject line: Content Release Notification. Could not get I/O for connection to: hpmail.rtp.ppdi.com java.net.ConnectException: Connection timed out
    2.
    Import error for archive 'ProductionContent' in collection 'prod_idc': Invalid Metadata for 'ID_000025'. Virtual folder does not exist.
    3.
    Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_004118' was not successfully checked in. The primary file does not exist.
    4.
    Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_004213' was not successfully checked in. IOException (System Error: /u01/app/oracle/prod/ucm/server/archives/productioncontent/09-dec-21_23.29.44_396/4/vault/dmc_unblinded_documents/4227 (No such file or directory)) java.io.FileNotFoundException: /u01/app/oracle/prod/ucm/server/archives/productioncontent/09-dec-21_23.29.44_396/4/vault/dmc_unblinded_documents/4227
    5.
    Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_031414' with revision label '2' was not successfully checked in. The release date (11/4/08 9:12 AM) of the new revision is not later than the release date (11/4/08 9:12 AM) of the latest revision in the system.
    6.
    Import error for archive 'ProductionContent' in collection 'prod_idc': Invalid Metadata for 'ID_033551'. Item with name '07-0040_IC_Olive-View_UCLA_ERI_Cellulitis_2008-08-26.pdf' already exists in folder '/Contribution Folders/2007/07-0040/07-0040Site_Specific_Documents/07-0040Olive_View_UCLA_Medical_Center/07-0040Archive/07-0040Essential_Documents_ARC/07-0040Informed_Consent_ARC/'.
    7.
    Import error for archive 'ProductionContent' in collection 'prod_idc': Aborting. Too many errors.
    QUESTIONS:
    Is there a way to keep the import processing running even if the errors are coming. As it looks like when there are too many errors the import process stops in the middle.
    How do I find out the total number of folders and the documents. As I want to run the same query on Stellent 7.5 and find out total number of folders and the documents and then run the same query on 10gR3 and compare the results. Just want to fnd out how much content is imported.
    How do I run the import process over again as half of the content is imported and my import process failed in the middle when running the process over again what settings do I need to provide to make sure no duplicates get created etc.
    Any help is really appreciated.
    Thanks

    Hi
    There are a couple of ways to get around the issues that you are facing such that import process is not interrupted because of these. They are as follows :
    1. Use ArchiveReplicationException component . This will keep the import process running and make a log of the failed process which can be used for assessing / gauging the success of the import and what all needs to be redone.
    I would suggest this as the option for your case.
    2. Put the config variable for arciver exception to 9999 so that the archive process stops only after hitting the limit of 9999 errors.
    I would suggest to go for step 1 as that would be a much more foolproof and methodical way of knowing what all items have failed during import.
    Thanks
    Srinath

Maybe you are looking for

  • Blurry Titles in Premiere CS6

    Is Adobe doing anything to correct the problems that Premiere CS6 has when creating titles that look great until they are rendered, at which point they become blurry...titles created in Photoshop and/or AfterEffects render out the same way in Premier

  • I can't find the result of my scan anywhere...what am i doing wrong?

    i've followed the instructions i found on my mac and in the forum however, every time i scan a doc (i see evidence of it in the scanner menu) it never shows up how/where i believe i've saved it.  i have scanned a document with the standard settings t

  • Cannot find m1212nf multifunction printer driver to install on w/2008 terminal server (64bit).

    Cannot find m1212nf multifunction printer driver to install on w/2008 terminal server (64bit).  The existing driver wants me to connect the printer using USB.  The printer is in another facility I am trying to support.

  • Game development: how to pause a game?

    How to pause a game in order to open my inventory panel? I always think of destroying all objects, removing from stage and instantiating and adding to stage all again. But I don't know if I am going to waste my time doing that the hard way. I would l

  • Creation of ringtones on a UK 3G iphone

    I am trying to setup a ringtone on my new UK 3G iphone the Exorcist for my boss and Poison for my ex wife! I have bought the tunes on itunes, I highlight the tunes, right click and press create ring tone and get 'itunes could not connect to itunes se