How to Sign a native DMG installer?

Hi,
We have developed an application using AIR (for desktop) and have used some native processes. Hence, to distribute the application we are creating native installer for PC and MAC.
We were able to create a native installer for PC and also digitally sign the exe file. We are able to create a DMG installer but are unable to sign the DMG installer using ADT.
Is it not possible to create a signed native DMG installer for AIR application for MAC? If this is possible, please help us out here with steps or commands or a link.
Thanks,

Does this help? http://stackoverflow.com/questions/6630200/how-to-use-adt-to-package-an-air-application

Similar Messages

How can I copy the dmg installer file to a thumbdrive?

So we purchased a new iMac. The geniuses at the apple store installed Mountain Lion using their installation software. I want a backup copy of the installation files.
I was able to use unix/terminal to boot and display the boot disk and begin the installation process, which I intended to save to an external hard drive and copy the dmg file to a thumbdrive BEFORE the computer automatically restarted and deleted it. I even opened a microsoft word document thinking that without saving it would halt the restart process, but no. The computer restarted automatically without giving me the opportunity to copy the dmg file.
Does anyone have any ideas? Is there a unix command to halt the restart?
Thanks.

What I did when I got a new Macbook Pro was to get a 16GB USB Thumb Drive (or was it 32GB) and used SuperDuper to clone the boot disk to the USB Thumb Drive. (Carbon Copy Cloner could also be used).
Now I have a bootable copy of my Macbook Pro while it was young and uncluttered with all my junk. The clone has all my extra apps, such as iPhoto, Garageband, iMove, etc... that is not part of the Mac OS X distribution, and you only get when buying a new Mac.
When doing an upgrade, I download the new version (Lion, Mountain Lion, future "Cat"), and they quit the installer before it does anything. Now looking in Applications, there is an "Install OS X Lion", or "Install OS X Mountain Lion", etc... I made a copy of that app on a USB Thumb Drive or DVD. There have also been instructions on the web about how to make this into a bootable DVD or Thumb Drive. I have not bothered with that, as I have my above mentioned original clone I can boot from, and there is always the recovery partition I can boot from as well.
If you wish to have the Mac boot back into the initial setup mode, you can remove the following file and reboot:
rm /var/db/.AppleSetupDone

How to set the Native Process Installer generatedFile.exe's icon

hi
i have made the (Native Process packaged) .exe by using adt command
how can i change the default icon to the desiered one
thanks,
Dhaivat

Ah I see what you mean now. Unfortunately, this isn't available directly through AIR. However, there are third party utilities on Windows that will allow you to modify the icon resources and it should be simple enough on Mac through File Info.
If you'd like to see this functionality added to AIR, I'd like to suggest you add a feature request to our ideas.adobe.com page.
Thanks,
Chris

Error 16828 when update from native Windows installer

Dears,
I have noticed error 16828 when I tried to update AIR application.
Steps to reproduce (AIR 2.5.1):
1. Prepare AIR
2. Prepare Native windows installer (*.exe)
3. Install application from native windows installer
4. Run application updater
5. Download new application air file and start install
6. You will get 16828 error.
Does anybody know how to solve this problem?
I know (too late) that updating native application with build-in updater (air.update.ApplicationUpdaterUI) is not possible and I have to use NativeApplicationUpdater library.
Unfortunately we have many users with installed Windows native application with buggy updater class. Each time when they tried to update they will get this an error with so misleading error description.
thanks in advance
Adam

Hi, Brad
I was able to run .exe renewal in accordance with "extendedDesktop"
The principle of the following
<Code>
airFile = File.applicationStorageDirectory.resolvePath(folderUpdate + '/updateCode.exe');
private function StartUpdate () : void {
                    var npsi : NativeProcessStartupInfo = new NativeProcessStartupInfo();
                    npsi.executable = airFile;
                    var nativeProcess : NativeProcess = new NativeProcess();
                    nativeProcess.start(npsi);
                    Reboot.CloseApp();
Close Apllication function
public static function CloseApp () : void {
            var mgr:ProductManager = new ProductManager("airappinstaller");
            NativeApplication.nativeApplication.exit();
</Code>
Run .exe through the console and close the application. If you do not close the updates will not start because of the running application.
Everything works, but for me the way the data is not suitable.
Another disadvantage is that the way to run an application can only Windows.

I have changed my apple ID but cannot get my Mac computer to change it on iCloud. I have signed out but do not know how to sign back in with my new id.

I have successfully changed my apple ID and password, but cannot get my Mac computer to change it on iCloud. I have accessed system preferences, iCloud and sign out. But now I do not know how to sign in using my new id and password. I would like iCloud to work on my Mac so that it will sync to my iPhone and iPad. I have installed all of the latest software. How do I change this account on my Mac?

Do you have your Mac backed up?
If not, you should use Time Machine to back up your Mac to an external hard drive just "in case".
But if all you did was change your existing ID, then deleting the Calendar infomation from the Mac when you sign out should not be an issue. Since it is the same Apple ID, it is the same iCloud account (just with a different name), so your Contacts, Calendars, etc. are stored in iCloud. When you sign back in, you will have the option to sync Contacts, Calendars, Notes, etc. with iCloud - it should already be checked. Just sign back in, and your iCloud info will re-download to your Mac.
I just tried this, and all of my stuff showed up when I signed back in. Notes took a couple of seconds to load once I opened them, but they are all there.
Note: If you are signing on with a brand new Apple ID, then nothing will be downloaded because it will be an entirely different iCloud account. But if it is the same Apple/iCloud/iTunes ID with just a new email, then it will all be restored.
Cheers,
GB

HT203658 How to sign in using the Apple ID that I initially used to set up the computer?

How to sign in using the Apple ID that I initially used to set up the computer? I cant update my iPhoto and download pictures from Iphone :((
I updated ios on my MacBook Air to Yosemite, since then I had to update also iPhoto, as it was not compatible with Yosemite. When trying to update it I received this alert "These apps cannot be accepted by your Apple ID. These have already been assigned to another Apple ID." And the solution wud be to sign in using my initial Apple ID, but Im not aware of having one or changing it. I have many Mac devices so I at one point sing in to my Air with another ID not even noticing it and have it since the moment I found out the alert. Can anyone help me with this, please? And also, where are my pictures stored in my Air? Is there some folder, cuz Im used to Windows and Mac is totally new and not really clear to me for now. I need to download pictures from my iPhone and iPhoto seems to be the only way??
thanks
elen

How to sign in using the Apple ID that I initially used to set up the computer? I cant update my iPhoto and download pictures from Iphone :((
Try to remember any AppleID you ever may have used.
In the AppStore Application go to the "Store" menu.
It will show you the AppleiD You are currently using (in the last menu entry "View my account ....".
Use the "Sign out" command and sign in with any AppleID you ever used, ten check the "Purchases" tab of the App Store, if that will show the bundled apps.
And also, where are my pictures stored in my Air?
If you have used iPhoto to download your pictures, the photos will be stored in the iPhoto Library, a package, that is stored in the folder "Pictures" in your Home folder.
Terence Devlin has written some very useful user tips, that describe the iPhoto Library: See the links below:
iPhoto and File Management
How to Access Files in iPhoto
Exporting From iPhoto

How to use a native library packaged in a connector

Hi,
I know how to package a native library into a connector in my app server. But I don't quite know how to use it. Suppose I provide a wrapper java class for the native library, can I use the java class directly in my EJB (since the classloader of the RA is the parent of the EJB classloader) or I have to issue an outbound call?
Thanks,
Haitao

Thanks Vidyut! You've answered my question.
I placed the jar file in the $CATALINA_HOME/shared/lib directory. But where should I place the taglib TLD file? And how should I reference it in web.xml?
Currently, my web.xml is as follows and it doesn't work.
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<taglib>
<taglib-uri>http://abc.com</taglib-uri>
<taglib-location>c:\Tomcat\shared\lib\mytags-taglib.tld</taglib-location>
</taglib>
</web-app>
Thanks again!
Joe

How to use a native library (.so) in EJB

Hi,
I know how to package a native library into a connector in iAS. But I don't quite know how to use it. Suppose I provide a wrapper java class for the native library, can I use the java class directly in my EJB (since the classloader of the RA is the parent of the EJB classloader) or I have to issue an outbound call?
Also, if I package the native library into a RA (standalone), iAS will automatically load it so in my wrapper java class, I don't have to call System.loadLibrary(...). Correct?
Thanks,
Haitao

Thanks, Russ. My older Mac Pro is a 2,1 -- I think I only missed by a few months in buying one that would run Mavericks (64 bit EFI). I do intend to buy a "trashcan" Mac Pro but not just yet.
As for updating projects — that's my issue, I think. The Mac Pro and the laptop are networked so I can be working on my laptop and go to the Mac Pro and open the Final Cut Pro that is resident on that computer. What is odd is that it doesn't open any of the projects that normally open up with I start up FCP X on the Mac Pro.
I frequently work inside the house on my laptop running programs that are on my Mac Pro outside in my office — usually no problem at all with Adobe applications.
FCP X won't let me open a project by clicking on the project — it insists that I "Open projects from within FCP X" but they won't open that way. This what is odd — that it won't let me open projects even thought they are fully native to that version of FCP and are even on the same hard drive on the Mac Pro.

Error while creating Move-In - How can i Allocate Device to Installation ?

Hello Experts,
while creating Move-In i am getting following Error "No Devices Allocated to Installation PC0301A0 on 10.03.2011"
How can i allocate device to installation, please advise where can i configure the settings and create Move-In without above error.
Regards,
Rajesh. G

Hi Bill,
Thanks for your responce it was helpfull, but i am trying to create Move-In with help of Contract Account. I was not able to create Move-In and i tried even with Bussiness Partner.
When i was trying to create Move-In with the help of Business Partner Option in Move-In i am getting error as "The required index has not been created yet in the search Engine", same is happening when i am trying for Business Partner in Business Master Data. This might be the reason for Move-In creation Error, please help me where can i configure index settings for search engine for Business Partner.
Please correct me if i am wrong.
Thanks,
Rajesh Gunda

Sidecar AIR Runtime install with Native .exe installer using ADT

I have packaged my AIR app into a Native .exe installer using ADT. If the user does not have air installed and they are connected to the internet, the AIR runtime is automatically installed.
Is it possible to package the AIR runtime into the exe so that if the user is not online the AIR runtime is installed?
I have experimented with the sidecar install and .air file but ideally I want to only have the one file(.exe). I already have a distribution licence from Adobe.

manicjames wrote:
I have packaged my AIR app into a Native .exe installer using ADT. If the user does not have air installed and they are connected to the internet, the AIR runtime is automatically installed.
Is it possible to package the AIR runtime into the exe so that if the user is not online the AIR runtime is installed?
I have experimented with the sidecar install and .air file but ideally I want to only have the one file(.exe). I already have a distribution licence from Adobe.
This isn't available at this time, but I think it's a great idea. You might want to add a feature request for this over at ideas.adobe.com and bugbase.adobe.com, or review and vote for these current feature requests if they provide for what you're looking for:
Portable AIR Apps
Create portable AIR apps
If you decide to add a new request, please post back with the URL so others can cast their votes and add comments.
Chris

How to embed icon in dmg of MAC OS in air application?

hi
How to embed icon in dmg of MAC OS in air application? while in windows application it working file if i set <icon> tag in windows application's .xml file.....
Please reply

solution ::
add this code in windows app of AIR
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication
xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%" creationComplete="init()" layout="absolute" xmlns:local="*">
<mx:VBox>
<mx:Label text="Jay Mahadev" fontSize="32" />
</mx:VBox>
<mx:Script>
<![CDATA[
private function init():void
if(NativeApplication.supportsDockIcon){
var dockIcon:DockIcon = NativeApplication.nativeApplication.icon as DockIcon;NativeApplication.nativeApplication.addEventListener(InvokeEvent.INVOKE,undock);
//dockIcon.menu = createIconMenu();
else if (NativeApplication.supportsSystemTrayIcon){
var sysTrayIcon:SystemTrayIcon = NativeApplication.nativeApplication.icon as SystemTrayIcon;sysTrayIcon.tooltip =
"Stopwatch";sysTrayIcon.addEventListener(MouseEvent.CLICK,undock);
//sysTrayIcon.menu = createIconMenu();
public function undock(event:Event = null):void{stage.nativeWindow.visible =
true;NativeApplication.nativeApplication.icon.bitmaps = [];
]]>
</mx:Script>
</mx:WindowedApplication>
and also in windowapplication.xml
<?xml version="1.0" encoding="UTF-8"?>
<application xmlns="http://ns.adobe.com/air/application/1.0">
<icon>
<image128x128>/icons/128x128.png</image128x128>
<image48x48>/icons/48x48.png</image48x48>
<image32x32>/icons/32x32.png</image32x32>
<image16x16>/icons/16x16.png</image16x16>
</icon>
</application>
Reference Link :::
http://www.adobe.com/devnet/air/flash/quickstart/articles/stopwatch_dock_system_tray.html

HT2731 how to sign in with apple store without filling payment information

how to sign in apple store without filling payment information

There are instructions on this page for how to create an account without giving a credit card number : http://support.apple.com/kb/HT2534 i.e. select a free app and create an account when 'buying' it.

How to sign into another AIM account?

I must be missing something obvious, I can't find how to switch AIM accounts in iChat and I can't find the instructions on the Apple support pages.
I have ichat 4 with Leopard and when I launch it signs into one of my AIM accounts automatically. The other AIM accounts are listed in the preferences under Accounts. However, I can't figure out how to sign into one of the other accounts.
Can anyone tell me where/how to switch?
Thanks and happy holiday.

Hi,
If in iChat Menu > Preferences > Accounts you list several Accounts/Screen Names then the pane on the right when the Account Info tab is highlighted will have a Box to say "Use this Account".
This will then log those Accounts in to the relevant Servers at Launch (But read below).
In the General Section of the Preferences you can set whether iChat Logs Accounts in at Launch or not.
If you have more than one Buddy List open you can "Hide" the one you don't want by using the Red Button to left of the Window. This will not Quit iChat nor will it Log you out of that Screen Name.
NOTE: If you Quit iChat with Buddy List Hidden it will Remember this as the Window Position - the same as if you move a Buddy List and Quit iChat - It will be in the same place you left it.
Use the Window Menu to bring On-line Accounts listed Buddy Lists back into view.
9:57 PM Friday; December 25, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

How to refer to pacman's installation root in pre_install, etc

I have been unable to find any documentation of exactly how to refer to pacman's installation root from inside the .install script functions. Curious, I started looking through /var/abs/core for some real-world examples that might clue me in. What I found surprised me - from the looks of it, many of the functions there simply assume that their working directory IS the pacman installation root. For example:
/var/abs/core/ca-certificates/ca-certificates.install:
post_install() {
usr/sbin/update-ca-certificates --fresh
post_upgrade() {
usr/sbin/update-ca-certificates --fresh
pre_remove() {
# clean up certificates
local _backup=$(mktemp)
mv etc/ca-certificates.conf ${_backup}
echo > etc/ca-certificates.conf
usr/sbin/update-ca-certificates --fresh
mv ${_backup} etc/ca-certificates.conf
post_remove() {
# remove the cert file if it is empty
[[ -s etc/ssl/certs/ca-certificates.crt ]] || rm -f etc/ssl/certs/ca-certificates.crt
And yet, some others seem to assume that the install root is "/", like here:
/var/abs/core/crda/crda.install:
## arg 1: the new package version
post_install() {
echo "Uncomment the right regulatory domain in /etc/conf.d/wireless-regdom."
echo "It will automatically be set when necessary."
## arg 1: the new package version
## arg 2: the old package version
post_upgrade() {
# In an upgrade from 1.0.1-1 or older, the wireless-regdom file moves from the crda package
# to the new wireless-regdb package. If the user changed the file, it is save to overwrite the one
# from wireless-regdb by the user-defined one
if [ $(vercmp $2 1.0.1-2) -lt 0 ]; then
if [ -f /etc/conf.d/wireless-regdom.pacorig -a -n "$(grep -v ^# /etc/conf.d/wireless-regdom.pacorig 2>/dev/null | grep -v ^$)" ]; then
mv /etc/conf.d/wireless-regdom.pacorig /etc/conf.d/wireless-regdom
fi
fi
or here:
/var/abs/core/cryptsetup/encrypt_install:
# vim: set ft=sh:
install ()
if [ -z "${CRYPTO_MODULES}" ]; then
MODULES=" dm-crypt $(all_modules "/crypto/") "
else
MODULES=" dm-crypt ${CRYPTO_MODULES} "
fi
FILES=""
SCRIPT="encrypt"
add_dir "/dev/mapper"
[ -f "/sbin/cryptsetup" ] && add_binary "/sbin/cryptsetup" "/sbin/cryptsetup"
[ -f "/usr/sbin/cryptsetup" ] && add_binary "/usr/sbin/cryptsetup" "/sbin/cryptsetup"
add_binary "/sbin/dmsetup"
add_file "/lib/udev/rules.d/10-dm.rules"
add_file "/lib/udev/rules.d/13-dm-disk.rules"
add_file "/lib/udev/rules.d/95-dm-notify.rules"
help ()
cat<<HELPEOF
This hook allows for an encrypted root device.
HELPEOF
Since I'd normally take the PKGBUILDs in /core/ as fairly good examples of what the Arch devs consider best practice, it's leaving me with either two conclusions: this is a bug, or I'm missing something. Any input is appreciated. :)

We chroot() and then chdir() to the root directory in every install script executed- so it is no assumption at all.
http://projects.archlinux.org/pacman.gi … aa3e7#n421
Preference would be to omit the leading /, but due to the chroot/chdir combo, both should work.

Please, please tell me how to sign out of adobe online.

I do not need an adobe online account. I though I was updating acrobat when I downloaded a program from your site. Some of my features appeared to be lost after that, but there was a suggestion to sign in to adobe online. I thought I had to do that to get the features I was used to using (extract pages, etc.). Turns out I was in a new program: Reader. I did not need to be signed in on line at all. I think I clicked keep me signed in. I do not want to be signed in. I also gave you my email address and real birthday. I do not want adobe online to have that or track me. Please tell me (1) how to sign out of adobe online, (2) not be tracked by adobe; and (3) get my real birthday out of your records. Thank you.

This is a user to user forum, not a way of addressing Adobe. As to your specific questions, I don't know what you mean by "Adobe on line", so I cannot suggest how to sign out of it. And I don't know of any commercial firm that will agree to completely erase all your data from their records, so I wouldn't expect you to find any way to acomplish what you ask in (2) and (3).

How to Sign a native DMG installer?

Similar Messages

Maybe you are looking for