How to simulate sms serviceS

Hi there
Currently I am working on J2ME project but I am stucked in SMS problem.
How can I simulate sms sending and receiving to and from emulators.
I want to send sms from my PC to emulator and receive sms form emulator.
Could you please help me with this issue, may be you could send any links or sth like that.
Thank you

You may run two simulate on one PC.WTK2.2 have a completely example. One send to another/ or receive from another.

Similar Messages

How to Carry out Bulk SMS services on your website

Hello friends
Please I would like to introduce bulk sms services on my site I designed it with Fireworks and exported to Dreamweaver, then uploaded. But recently I have decided to make it more dynamic/blog with it by installing Wordpress and would not mind discarding the static aspects of it.
With this, how can I introduce bulk sms services into this site?
Thank you in anticipation

Let me google that for you
Nancy O.

How to send SMS ( Short Message Service ) from java code

Hi
How to send SMS ( Short Message Service ) from java code.
Thanks
Gaurav

Do you need to receive SMS? If you need to receive SMS, you will need to host your own GSM device or modem so that people can send you SMS.
If not, you can just use internet SMS gateways like clickatell as mentioned above will do the work, and post to them by HTTP, XML or email. The cost is about 6-8 cents per SMS. There are cheaper services, but not always reliable. If you need to host your own GSM device, you can use software like http://www.kannel.org (GPL Open Source) or http://www.visualgsm.com. Alternatively, you may obtain a shortcode from your Telco - but these come with monthly subscription of maybe one or two hundreds.
Regards,
Joshua
<SMS Gateway>@Expert

How to simulate the escalation process

Hi All,
Can somebody tell me how to simulate the escalation process in service?I need to know whether all configuration in my system has done or not done yet....
In my system if there's a problem in customer system for more than 7 hour, then system will detect the problem and send an sms/email to the person responsible in some level (ex: level 1 for SLG 95%), if the customer system still have a problem for more than 10 hour, then system will send an sms to person responsible in level 2, etc.
I want to know how can I simulate this escalation process in CRM service manually. I'm using CRM 5.0. Any helpful answer will be rewarded. Thank you.
Rgds,
Aleluya sap.

Hi Aleluya,
You can use date types which will have the times at which the trigger of mail is supposed to happen and once the current date and time is equal to say date type 1 there can be an action setup to send a mail to a particular partner function .
Also you can use status condition for controlling the mails ..
hope it helps
Cheers!
Raj

How to consume Web Services form ABAP ?

Hi,
Please advise how to consume web services from ABAP Code ? is there any automatic generating proxy class in order to consume web services ?
I am using NW 7.0 SP15
Thank You and Best Regards
Fernand Lesmana

Hi Fernand,
chk out for this link
Consume an ABAP Webservice (WAS 620) from .Net
Send SMS to India from ABAP
working web service from ABAP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a4433436-0301-0010-f2a9-9281ad574054
Regards
Sampath

Skype SMS service is unsatisfactory

To those of you who consider using Skype SMS service I would just like to say, - Consider it twice.
There is only one positive thing about sending SMS Text messages in Skype and that is the fact that it is normally cheaper than sending SMS text messages through your mobile phone provider.
But my experience with Skype SMS is not so good.
When I send SMS messages directly from my phone to the Philippines they normally arrive within minutes. I know that for a fact because sometimes I have been chatting in YM or facebook with the counterpart that I just send the text message to, and they confirmed that it was deliverede not later than 1 or 2 minutes after I send it.
On the other hand when I send SMS Text messages via Skype to the Phillipines, sometimes it takes 1/2 a day before the message is delivered.
I know that the official statement of SKYPE is that its because of the recipients phone company in the country where you send the SMS message - but that does not change the fact that sending a text message on your phone only takes 1 or 2 minutes to arrive in the Phillipines and via Skype it can take up to 1/2 a day or even more.

Saud1995 wrote:
It has been a month now and I am trying to get an answer from Skype about how can I change my Skype number carieer to another phone carieer aka AT&T, Verizon.. etc
Hello
Unfortunately Skype Number carriers can't be changed.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Regarding SMS service in SAP B1........

Dear All,
I want to use the SMS Service availalble in SAP B1. Can u Pls explain in detail how can i use this SMS Service available in SAP B1?

Thanks ,
But is there any way so that i can use the SMS Service in SAP B1.
Means do u have any idea that is it possible in SAP B1 to use SMS Service..

SMS service setup

Does anyone know how to set up SMS service from the JMS server?
I am working on an application which require a SMS alerts.
Thanks

hi *,
in most times sms (shjort message services) are done via email2sms gateways. so in most cases the most things are basically done via email.
regards chris

SMS Service

hi. how do i start deveoping a SMS service? any resource
materials? thanks.

Hi Lulay,
the only resource I found so far are Configuration and
Development Guide. As far as I understand, all you can do is
create Alerts that are sent via SMS.
Regards Jens

Can anyone guide me how to sync sms on iphone to pc and also what setting need to be done to make sure sms remain in iphone indefinitely - need to keep record for work purpose. thanks.

Need help from the expert on how to sync sms on iphone to pc and how to make sure that sms on iphone is not being deleted - need to keep sms for office record purpose

You mean take the cover off of the iPhone, to look inside? I'd recommend against it. Even with warranty expired, you might qualify for an out-of-warranty service, which for 3GS is $149.
Other than that, any repair/service options are going to cost money. You might want to see if a wireless carrier will let you get a new contract & phone.
Out of curiousity, you're just using at as, basically, an iPod Touch, if there's no cell provider? Did I understand that correctly?

Send Mail With SMS Service

Hi,
Pls tell me how to configure sendmail with SMS Service.
Regards,
Ramana
[email protected]

Hi all
Thanks for your reply, already tried this methods, Its not working for my requirements. Because my attachment is can be any type like pdf,doc,txt,xls,jpg,.
And also the Utl_mail is very slow. Its using RAW type.
I can use the javamail package to solve this problem, this javamail package needs to download into server from there you can attach thus documents into mail. But I want fetch the documents and ate the same time I want attach to a mail. Like yahoo attach or msn attachment.
Thank you,
Selvam

How to simulate ModelState.IsValid in C# winform application for any model validation

in asp.net mvc the people validate model this below way
using System;
using System.Data.Entity;
using System.ComponentModel.DataAnnotations;
namespace MvcMovie.Models {
public class Movie {
public int ID { get; set; }
[Required]
public string Title { get; set; }
[DataType(DataType.Date)]
public DateTime ReleaseDate { get; set; }
[Required]
public string Genre { get; set; }
[Range(1, 100)]
[DataType(DataType.Currency)]
public decimal Price { get; set; }
[StringLength(5)]
public string Rating { get; set; }
public class MovieDBContext : DbContext {
public DbSet<Movie> Movies { get; set; }
if (ModelState.IsValid)
db.Movies.Add(movie);
db.SaveChanges();
return RedirectToAction("Index");
now guide me how could do the model validation same way in any c# win and webform application ? guide me in details. thanks

this question has been cross posted to forums.asp.net and to stackoverflow:
"How to simulate ModelState.IsValid
in any application for any model validation"
"How
to simulate ModelState.IsValid in C# winform application for any model validation"
Gerry (Lowry) Ability Business Computer Services ~~ Because it's your Business, our Experience Counts!

How to send sms to mobile from tomcatserver using java code?

Hi,
Could you please let me know that,
How to send sms to mobile from tomcatserver using java code? Please provide the code snippet.
Thanks in advance.

Yes, but something needs to send that message. You can't just take an arbitrary computer and send an SMS, it does not have the hardware to do that.
So either you have a mobile through which you do that or more likely - you use some sort of online service to do it. Whatever choice you make will determine what code you will have to write to get it done. Nobody is going to deliver the code to you, that's your job. It is also your job to figure out what service you are going to use.

How to send SMS from JSP application.

Hi,
I have created a web application using JSP for our Office internal use. I want to include the folowing option in our app.
1) How to send SMS from the application to mobile.
2) I don't want to use third party service (ex: SimpleWire). as the app is for internal purpose only.
It will be helpful, if I get the complete procedure to implement it, as this is my first application.
Thanks & Regards
suresh.

I am having problem with smslib. smslib is an enhanced version of jsmengine, I have compiled the program, there is no error but when I run it , the following error is found. Can you help? my email is [email protected]
Exception in thread "main" java.lang.NoClassDefFoundError: CIncomingMessage (wrong name: org/smslib/CIn
comingMessage)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)

How to send sms message from webdynpro to mobile

Hi
i am working on QA project.when system QA parameters are above standard values ,then i need to send SMS message to Mobile of supervisor.Can anybody suggest how to implement this?
Thanks
Prasad

Hai,
Create a web service model for this web servicehttp://www.webservicex.net/SendSMS.asmx?WSDL
this web service provides sms service through india.
But it can only work :If your mobile number is 098XXXXXXXX ,Please enter as 98XXXXXXXX
Create a view with two input fields (ToMobilenumber, from mail Addrees)
Create a textedit Elemnt (Message).
Create a button set the parameters to your web service and execute it.
regards,
Naga Raju

How to simulate sms serviceS

Similar Messages

Maybe you are looking for