SMS service setup

Does anyone know how to set up SMS service from the JMS server?
I am working on an application which require a SMS alerts.
Thanks

hi *,
in most times sms (shjort message services) are done via email2sms gateways. so in most cases the most things are basically done via email.
regards chris

Similar Messages

Outlook 2010 - cannot setup SMS service

I've tried to set up a sms service in Outlook 2010 (Win8), as specified here:
http://office.microsoft.com/en-us/outlook-help/send-and-receive-text-messages-sms-HA101823438.aspx
on a laptop connected to broadband network (SIM card etc) - so using "Third-party text messaging (SMS) service" option.
However, there is no "Text Message (SMS)" item in the "New Items" tab. I can see nothing in the Options that would help to enable this.
I've tried to add to the ribbon the ""New SMS" item, but it is not active (grayed).
Best regards,
Mariusz

You need to configure a Text Messaging (SMS) account firstly
http://www.youtube.com/watch?v=AEMWOVW9kbA
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Tony Chen
TechNet Community Support

No SMS - Service since Software Update Z10

Hi, since my software update to 10.1.0.2312 I cant use SMS Service! I dont get any SMS and I cant send any SMS. Also I cant delete a SMS....
It's my first BackBerry and I'm VERRY angry!

Are you T-Mobile USA? If so, their current OS version is 10.1.0.2006, but might be different in other countries.

(com.apple.collabd[15483]): Service setup event to handle failure and will not launch until it fires.

Hello,
I am fairly new at Xserve administration, but I got thrown in the fire and i need your help.
My system.log is being hammered with this error:
(com.apple.collabd[15483]): Service setup event to handle failure and will not launch until it fires.
I did my research and it seems to be related to Wiki, but I disabled wiki and restarted and it is still coming up. Any advice would really help
System Version: OS X 10.10.1 (build 14B25)
Server Version: Server 4.0.3 (Build 14S350)

Try deleting the preferences file

WCF service setup with certificate authentication error

I have a WCF service setup and I need to use a certificate with it and are getting numerous errors when I attempt to browse it. The 1st error I get is "Security settings for this service require 'Anonymous' Authentication but it is not enabled for
the IIS application that hosts this service."
This sounds like a straightforward error message and setting the authentication method in IIS to anonymous resolves being able to browse the service. But I need to use a certificate and setting authentication to anonymous is obviously not right since we
only want those with the proper certificate to access the service. I have all authentication methods in IIS set to disabled when I get the above error message. I have the SSL settings in IIS for the service set to require a certificate as well. I am using
IIS 8.5 as well.
Here is my config file in hoping someone could point me in the correct direction. The service should only work over HTTPS since we are using a certificate and I need the meta data exposed as well hence the mexHttpBinding. I have searched the web but no solution
is working. Any help is appreciated.
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<configSections>
<sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="HEALookupProxy.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</sectionGroup>
</configSections>
<appSettings>
<add key="aspnet:UseTaskFriendlySynchronizationContext" value="true" />
</appSettings>
<system.web>
<compilation targetFramework="4.5.1" />
<httpRuntime targetFramework="4.5.1" />
<authentication mode="None"></authentication>
</system.web>
<system.serviceModel>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true">
<baseAddressPrefixFilters >
<add prefix="https"/>
</baseAddressPrefixFilters>
</serviceHostingEnvironment>
<services>
<service name="HEALookupProxy.HEALookupService" behaviorConfiguration="HEALookupServiceBehavior">
<endpoint address="" binding="wsHttpBinding" contract="HEALookupProxy.IHEALookupService" bindingConfiguration="HEALookupConfig" />
<endpoint contract="IMetadataExchange" binding="mexHttpBinding" address="mex" />
</service>
</services>
<bindings>
<wsHttpBinding>
<binding name="HEALookupConfig">
<security mode="TransportWithMessageCredential">
<transport clientCredentialType="Certificate"/>
</security>
</binding>
</wsHttpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior name="HEALookupServiceBehavior">
<serviceMetadata httpsGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="false" />
<serviceCredentials>
<serviceCertificate x509FindType="FindBySubjectName" storeLocation="LocalMachine" storeName="My" findValue="certnameremoved" />
</serviceCredentials>
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true" />

<directoryBrowse enabled="false" />
<security>
<authorization>
<remove users="*" roles="" verbs="" />
<add accessType="Allow" users="user1, user2" />
</authorization>
</security>
</system.webServer>
</configuration>

Hi spark29er,
>>The service should only work over HTTPS since we are using a certificate and I need the meta data exposed as well hence the mexHttpBinding.
For creating the HTTPS WCF service, first please change the mexHttpBinding to
mexHttpsBinding as following:
<endpoint contract="IMetadataExchange" binding="mexHttpsBinding" address="mex" />
For more information, please try to refer to:
#Seven simple steps to enable HTTPS on WCF WsHttp bindings:
http://www.codeproject.com/Articles/36705/simple-steps-to-enable-HTTPS-on-WCF-WsHttp-bindi .
Then please try to check the following article about how to do the certificate authentication on HTTPS WCF Service:
http://blogs.msdn.com/b/imayak/archive/2008/09/12/wcf-2-way-ssl-security-using-certificates.aspx .
Besides, setting the
includeExceptionDetailInFaults as false can give us more detailed error information.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)

Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano Villanueva

Hi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva

SMS Service integration

I have looked around the forums but haven't found any definitive answers, has anyone found a good SMS Broadcast Service that can be integrated with BC?
Thanks for any help!

Hi,
I sent you a PM. I have an SMS service and depending on what level of integration you need I may can help you.
Lynda

Integrating SMS service with E Business Suite

Hi,
We are looking forward to configure sms service with our EBS 11i and R12.1.1. Need to send sms messages in mobiles for modules like HRMS, Learning management, recritement etc. Also general alerts and notifications.
Need any pointers, tips, reference or documentation regarding the same.. Would be of great help
Thanks..
Kshitij

Hi user;
Please check:
Can SMS Be Sent To Mobile Phone Once Order Is Ship Confirmed? [ID 757146.1]
Mobile Field Service Auto Synchronization and Notification [ID 414838.1]
Also check:
Using Mobile Devices with Oracle E-Business Suite
http://blogs.oracle.com/stevenChan/2010/01/mobile_devices_ebs.html
http://blogs.oracle.com/stevenChan/2008/11/oracle_business_approvals_for_managers_iphone_app_now_available.html
INTEGRATION OF ORACLE APPS WITH MOBILE SMS
INTEGRATION OF ORACLE APPS WITH MOBILE SMS
Hope it helps
Regard
Helios

Skype SMS service is unsatisfactory

To those of you who consider using Skype SMS service I would just like to say, - Consider it twice.
There is only one positive thing about sending SMS Text messages in Skype and that is the fact that it is normally cheaper than sending SMS text messages through your mobile phone provider.
But my experience with Skype SMS is not so good.
When I send SMS messages directly from my phone to the Philippines they normally arrive within minutes. I know that for a fact because sometimes I have been chatting in YM or facebook with the counterpart that I just send the text message to, and they confirmed that it was deliverede not later than 1 or 2 minutes after I send it.
On the other hand when I send SMS Text messages via Skype to the Phillipines, sometimes it takes 1/2 a day before the message is delivered.
I know that the official statement of SKYPE is that its because of the recipients phone company in the country where you send the SMS message - but that does not change the fact that sending a text message on your phone only takes 1 or 2 minutes to arrive in the Phillipines and via Skype it can take up to 1/2 a day or even more.

Saud1995 wrote:
It has been a month now and I am trying to get an answer from Skype about how can I change my Skype number carieer to another phone carieer aka AT&T, Verizon.. etc
Hello
Unfortunately Skype Number carriers can't be changed.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Regarding SMS service in SAP B1........

Dear All,
I want to use the SMS Service availalble in SAP B1. Can u Pls explain in detail how can i use this SMS Service available in SAP B1?

Thanks ,
But is there any way so that i can use the SMS Service in SAP B1.
Means do u have any idea that is it possible in SAP B1 to use SMS Service..

SMS Service in SA

I was told by another SAP B1 consultant that the SMS service in B1 is not yet available in South Africa. Is that true, and if so, what is the reason?

It depends on wich is your sms provider. You normally need to send the SMS against a gateway, wich will have a propietary protocol. An intermediate vendor can provide you an http access based on xml or even web services if you are lucky :S Try contact providers in your country

SMS Service

hi. how do i start deveoping a SMS service? any resource
materials? thanks.

Hi Lulay,
the only resource I found so far are Configuration and
Development Guide. As far as I understand, all you can do is
create Alerts that are sent via SMS.
Regards Jens

SMS Service providers

Hi
Are there any SAP approved SMS service providers?

Checkout following weblog -
/people/durairaj.athavanraja/blog/2005/07/12/send-sms-to-india-from-abap
It doesn't work for some but maybe it works for you.
Cheers,
Sanjeev

Pre-checks for cluster services setup

Hi Expert,
During the pre-checks for cluster services setup, I have got this error for Checking node connectivity.. How can I resolve this problem. The error is as follow as I enter "runcluvfy.sh stage -pre crsinst -n db-a,db-b" command. If the Check node connectivity fail, can I proceed to install the clusterware?
Checking node connectivity...
Node connectivity check passed for subnet "10.251.246.0" with node(s) db-b,db-a.
Node connectivity check passed for subnet "10.10.10.0" with node(s) db-b,db-a.
Node connectivity check passed for subnet "172.16.1.0" with node(s) db-b,db-a.
Node connectivity check passed for subnet "172.16.0.128" with node(s) db-b,db-a.
Node connectivity check passed for subnet "172.16.193.0" with node(s) db-b,db-a.
Suitable interfaces for the private interconnect on subnet "10.251.246.0":
db-b bge0:10.251.246.83 bge0:10.251.246.63
db-a bge0:10.251.246.82 bge0:10.251.246.61 bge0:10.251.246.99
Suitable interfaces for the private interconnect on subnet "10.251.246.0":
db-b ce0:10.251.246.64
db-a ce0:10.251.246.62
Suitable interfaces for the private interconnect on subnet "10.10.10.0":
db-b bge1:10.10.10.83
db-a bge1:10.10.10.82
Suitable interfaces for the private interconnect on subnet "172.16.1.0":
db-b ce3:172.16.1.2
db-a ce3:172.16.1.1
Suitable interfaces for the private interconnect on subnet "172.16.0.128":
db-b bge3:172.16.0.130
db-a bge3:172.16.0.129
Suitable interfaces for the private interconnect on subnet "172.16.193.0":
db-b clprivnet0:172.16.193.2
db-a clprivnet0:172.16.193.1
ERROR:
Could not find a suitable set of interfaces for VIPs.
Node connectivity check failed.
Thanks,
Peg

Most probably the virtual ip's are not virtual but connected to a physical device.
cu
Andreas

How to Carry out Bulk SMS services on your website

Hello friends
Please I would like to introduce bulk sms services on my site I designed it with Fireworks and exported to Dreamweaver, then uploaded. But recently I have decided to make it more dynamic/blog with it by installing Wordpress and would not mind discarding the static aspects of it.
With this, how can I introduce bulk sms services into this site?
Thank you in anticipation

Let me google that for you
Nancy O.

SMS service setup

Similar Messages

Maybe you are looking for