How to skip initial load for SLT to Hana

Because our Hana is just migrated from the source system therefore we think the initial load is unnecessary.
I have checked the notes and some demos but did not see any way to skip initial load.
Please share you experience.
Source: BW7.3 Oracle
Target : BW7.4 Hana
Thanks!

This may or may not work... but...
try create a Z transaction calling this program.
Then, using SHD0 create a transaction variant for this transaction. That may give you full control over the selection screen.

Similar Messages

Regarding Initial load for CUA

we are testing CUA migration in IDM7.0 version.
Already below systems exists in my place
1)IDM7.0
2)CUA System(ABAP)
3)ABAP systems(Child for CUA system)
Now how to integrate CUA with IDM7.0 and Migrate CUA User information. Instead of Connecting each abap system with IDM, we plan to connect CUA and take all the data to IDM.
so how to do this? Executing Initial load for CUA system will solve this problem ? or any particular process available.
please suggest us.
regards

hi mathew,
thanks for your reply
Actually our initial step is to find to what extend CUA system information can be taken ove(Migrate) to IDM.
I feel It would be better to take all the Child system user info from CUA at one point rather than connecting each abap system with IDM. so that i can disconnect CUA once IDM is established.
So wondering how to integrate CUA system with IDM7.0, Executing Initial load for CUA system is same
as executing initial load fo ABAP system.
please shed light on this.
regards

Initial Load for marketing Attributes & Attribute sets in Cloud for customer 1405 version

Hi All,
I am working on Cloud for Customer Implementation with integration using Netweaver PI. SAP has just upgraded the CfC to 1405 version. In the latest integration guide & scenarios, there is provision to integrate marketing attributes & attribute sets as well.
I am following the latest integration guide (1405 version) but could not find any provision or template report for initial load of marketing attributes. Can anyone please assist in the initial load for marketing attributes?
Cheers.

Hello to all,
as the marketing attributes ar now supported in release 1502 i would like to ask you if there is now a way to perform an initila load for matketing attributes (Attribute Set, Attributes and Attribute assignemnt). This would be very helpful for all integration projects including marketing attributes.
Thnaks for your help and best regards,
Markus

Error when we are running the job "AS ABAP - Initial Load" for a ABAP Syste

Hi,
We are getting the below error when we are running the job "AS ABAP - Initial Load" for a ABAP System.
Pls note that we have maintained the below entry types to the Identieny Store & we are still getting the error.
Request you to help me
MX_TITLE_SUPPLEMENT
MX_SALUTATION
MX_NAME_PREFIX
MX_ACADEMIC_TITLE
Error----
runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_ACADEMIC_TITLE!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_ACADEMIC_TITLE' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_ACADEMIC_TITLE!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_ACADEMIC_TITLE' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_NAME_PREFIX!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_NAME_PREFIX' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_NAME_PREFIX!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_NAME_PREFIX' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_SALUTATION!!Mr.!!EN)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_SALUTATION' AND ValText = 'Mr.' AND ValLocale = 'EN') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_TITLE_SUPPLEMENT!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_TITLE_SUPPLEMENT' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_ACADEMIC_TITLE!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_ACADEMIC_TITLE' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_ACADEMIC_TITLE!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_ACADEMIC_TITLE' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_NAME_PREFIX!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_NAME_PREFIX' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_NAME_PREFIX!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_NAME_PREFIX' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_SALUTATION!!Mr.!!EN)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_SALUTATION' AND ValText = 'Mr.' AND ValLocale = 'EN') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error runFunctionsInString($FUNCTION.sap_getHelpValKey(MX_TITLE_SUPPLEMENT!!)$$) got exception
org.mozilla.javascript.EvaluatorException: uSelect(select ValKey from dbo.mxi_attrvaluehelp where ValId = 'MX_TITLE_SUPPLEMENT' AND ValText = '') got exception java.sql.SQLException: ORA-00942: table or view does not exist
Error putNextEntry failed storingMANJUHB
Exception from Add operation:com.sap.idm.ic.ToPassException: ToIDStore.addEntry failed storing entry 'MANJUHB'. IDStore returned error message: " Value not legal for this attribute:Attribute: MX_ACADEMIC_TITLE_2" when storing attribute 'MX_ACADEMIC_TITLE_2=$FUNCTION.sap_getHelpValKey(MX_ACADEMIC_TITLE!!)$$'
Exception from Modify operation:com.sap.idm.ic.ToPassException: ToIDStore.modEntry failed updating entry 'MANJUHB'. IDStore returned error message: "Entry does not exist" when fetching entry

The Probelm was resolved after editing the Script..... "sap_getHelpValKey.js"

Initial load for Object CUSTOMER_MAIN

Hi,
My client has taken their initial load more than year back. During that time some 900 odd customers where not copied to CRM from ECC because of various master data issues. Now, they have entry of Business Partner in table crmm_but_custno however none of them are actually downloaded from ECC.
We have given requirement to download them again from ECC and create them in CRM. For the same I tried to download them using CRMM_BUPA_MAP but due to the fact those customers has been part of initial load the system is taking delta load for them.
Here, I am facing error Business partner with GUID xxx does not exist (this error would come because system in taking delta load with update indicator 'U' which should come as 'I' for insert as those customer are not created yet!)
The main issue here is even in synchronization or initial load if we download the customer back which were part of initial load system would take only delta values and not all data from ECC.
Does any one has any suggestion how to download data with full details in them as they would come in initial load in this case?
I have already attempted following option:
1. Used initial load again
2. Synchronization with request using Tcode R3AR2/R3AR4/CRMM_BUPA_MAP
Thanks,
Alok Mehta

Hi Sudhir,
Thanks for the answer. I tried the same but I am getting following error in BDOC analysis:
Customer number xxx is already assigned to a business partner.
The above error is coming because this customer was part of initial load however the BDOCs were in error mode and no one had tried to reprocess them after clearing errors.
Now, I do not have those BDOC as they are deleted from the system. I am suspecting that I need to delete some entry in table where the reference was stored in earlier initial run.
Request you to please reply in case you have any suggestions.
Thanks,
Alok

How often data will load for HR

Hi All,
we are newly implimenting HR module in our project and
my user has like 4000 emp..
then how often i need to load the transaction data ?
It is US payroll structure.
Thanks in advance
Regards,
Mohan Potturu

Hi Mohan,
In our case master data is loaded for every 2-3 days ...
transcation data is loaded monthly..... why because suppose for payroll cube in hr data .... data wont come daily....it will be monthly..... in almost all the hr cubes transcation data load is monthly..... thats why in our datasource comes with calmonth but not with calday....( payroll cube... time and labor.... headcount and personnel action cubes 1 datasource)....
Regards
vamsi

Initial Load for Master Data from R/3 to CRM

Hi Middleware Experts,
I have an ambiguity on initial load of enhanced master data from R/3 to CRM. The current situation is
1)I have already enhanced master data on R/3 side with some additional fields. Now shall i go ahead with standard intial load of these Master data to CRM without creating middleware interfaces to map those enhanced fields on CRM side?
2)Also after doing initial load from R/3 to CRM, if I develop middleware interfaces for mapping these new fields of master data and then again do the initial load, so that new fields also get mapped, will the initial load be done properly as i have already done it once? will it overwrite the previous initial load data on CRM side properly?
Please suggest whether it can be done or not and which is the better option.
Regards,
Rahul

Hi Rahul,
Since you have not done the mapping yet the middleware will not bring those fields to CRM it will work just like a standard initial load without considering the enhanced master data field.
When you develop the middleware interface and enhance the CRM data structure also and then you can see the exchange of those fields through MW. You can start the intial load at that time also its not that you can do the initial load just once. But the better option would be that you avoid doing initial load several times because its time consuming activity. You do all the enhancement and then finally perform the initaial load.
<b>Allot points if my post helps!!</b>
Best regards,
Vikash.

How to skip digital signature for sap qa11 t-code in bdc

Dear all,
I am doing usage decision for sap QA11 t-code through BDC...when I am doing bdc recording, it asks for digital signature(user password) through a
pop up..how to skip that digital signature in BDC or any other solution..
Please provide your valuable suggestions..
Thanks..
Warm Regards,
Nellai Muthu..

Dear all,
I am doing usage decision for sap QA11 t-code through BDC...when I am doing bdc recording, it asks for digital signature(user password) through a
pop up..how to skip that digital signature in BDC or any other solution..
Please provide your valuable suggestions..
Thanks..
Warm Regards,
Nellai Muthu..

How to set initial value for a dropdown box?

Hi,
Within Netweaver 2004S (BI 7.0) we use integrated planning. In one of our applications we want to use a dropdown box (created with the WAD) to make a selection possible for a characteristic.
We set up a pre-query to fill the dropdown box (via data binding CHARACTERISTIC_SELECTION) with the proper values. This works fine.
We pass on the choosen entry (via command SET_VARIABLES_STATE) to a second variable that is used in another query. This command is triggered after the user makes a selection in the dropdown box. Also this works fine. After selection of one entry, the output of the second query is limited.
We have the following problem: the first time a blank selection entry is added to the dropdownbox and that no values are passed on to the second query. Because it seems that the user first must choose an entry.
What we would like to do is that one of the found values of the pre-query is automatically selected in the dropdown box and passed on to the second variable (to limit the second query).
I give you an example:
The first query delivers value A, B, and C for the characteristic of the dropdown box.
The first time the dropdown box showns an empty entry, and three additional entries A, B and C. The second query shows all results, because the second variable doesn't receive any value via the command SET_VARIABLES_STATE. The command is not yet triggered.
When you select A, B or C, the command is triggered and the second query shows only results for the choosen entry (this is correct). Now the empty entry has disappeared from the dropdown box. Only the entries A, B and C are left.
Is it possible to set up the dropdown box on such a way (or add some script coding around it) that in the initial show for the dropdown box one of the entries is choosen automatically, so that the empty line is not part of the value set of the dropdown box and that the command connected to the dropdown box (in our case the SET_VARIABLES_STATE) is carried out automatically?
Please, who can help us with this?
Kind regards and thanks in advance,
Marcel.

Hi,
In BW 3.5,say you want to set default for calmonth.
In order to avoid the ALL option from appearing in the dropdown box,
filter infobject 0CALMONTH for DP1 by any valid value.
In the object Data_provider include the lines in Bold:
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="SET_DATA_PROVIDER"/>
<param name="NAME" value="DP1"/>
<param name="QUERY" value="WORKSHOP_CALMONTH_DROPDOWN"/>
<param name="INFOCUBE" value="0D_SD_C03"/>
<<b>param name="FILTER_IOBJNM" value="0CALMONTH"/>
<param name="FILTER_VALUE" value="200401"/></b>
DATA_PROVIDER: DP1
</object>
Hope this helps.
Anu.

How can I re-load a table into HANA using SLT

Hi,
I am using HANA Version: 1.0.24 and SLT SAPK-91705INDMIS.
I have replicated several tables without any problems in this environment. However, when I tried to replicate T009, T009B and T009C; two tables T009B and T009C show status of replication as "Error" in both LTR and Hana Studio. Table T009 is replicated correctly.
I noticed that the table structure for T009B and T009C is created in HANA but there is no Data. Not sure what happened during replication. It seems to have stopped in between due to some error and now I have Table structures but with no data. I have tried suspend / stop and replicate but it keeps shown status as 'Error'.
Tcode LTR on SLT system shows following warnings
"Trigger exists in Source System although it is internally set as initial" for both tables.
I just want to start again and redo the load/replication of these two tables. What is the process of doing so?
Thanks
Sandeep

Hi Sandeep,
I cannot comment on the officially supported way of deleting these triggers. Maybe the following will work,
Run the below command from SQLEditor:
insert into <schema>."RS_ORDER" values(<your_table>, null, 'C');
delete from <schema>."RS_STATUS" where TABLENAME=<your_table>
Although I think it should delete source triggers(but not sure). You do the cleanup from SLT (transaction IUUC_SYNC_MON)-->Expert Functions --> 'Delete DB triggers' , 'Delete Logging tables entries' and 'Delete Logging tables' for your table.
Also after doing this, you can check in source system (transaction IUUC_REMOTE) if triggers for your table are deleted.
Caution Again :-): I don't know if the above method is a documented and officially supported one.
Regards, Rahul

How Module Processor initial load

To:PI Specialists
Situation:
We use sender module processor. We restart PI everyday.
So sometimes we get errror mail cause by sender module processor.
The reason of error is look up error for sender module processor.
after polling waitting, we can send successfully.
OS:AIX
DB:Oracle
PI:7.1 ehp 1(7.11)
Quetion:
We want to load module processor before first messaging in the morning.
Please show us the way of how to load module processor!!
Thank! naoki

Hi Naoki,
Ideally, I would have hoped that the mail adapter had taken care of this issue.
You might want to ask for a quick fix. It sounds very straightforward to wait for the polling.
Alternatively, for your particular case, as you know exactly what time the engine is starting up, you could use the channel scheduling. Suppose, your engine is scheduled to be restarted at 6AM, you can schedule your mail channel to start at 7AM.
Best regards, Yza

How to enter initial balance for material with moving average price

We have an issue where the customer wants to split one material into three materials. We are thinking of posting goods issue for the original material and post goods receipt for the new three materials. But how to enter the initial balance since these three materials must have moving average price.

Hi,
If you create material first time in system with the help of MM01 then specify the price this will gets affect on moving price.
and if the material is created with ZERO price then use the option MR21 which is said by Jürgen
Reagrds
Sandesh

How to skip approving steps for users who are also approvers?

We have a business need to be able to skip the approving steps for the users who are also approvers.
For this following steps were followed :-
1) Open .task file and go into the Assignment tab. Double click on the performer box within the routing slip, this should open the "Edit Participant Type" editor. Expand the "Advanced" section and place a check next to "specify skip rule", then click the edit icon to the right. Now enter an XPath expression that will test whether the current user is equal to the task creator.
2) We used - isUserInRole XPath function in the "Identify Service Functions" dropdown - first param to function is the userID, the 2nd is the role name.
We tried with hardcoded userID as well as by using
ids:isUserInRole(/task:task/task:systemAttributes/task:updatedBy/task:id,'California')
where 'California' is the group name (as one of the forum threads told this function works with groups).
We also tried with swimlane roles(using bpm.getPerformer() function) but it does not work either.
Please let me know if any one has any solution to this problem.

session as DirectorySession = DirectorySession.currentEngineSession
dirHum as Fuego.Fdi.DirHumanParticipant = DirHumanParticipant.fetch(session : session, id : "myUserId")
result = hasRoleAssigned(dirHum, role : "Approver")Give that a try...
HTH,
-Kevin

How to skip certain lines for a txt file and insert into array

so here is my question:
i had a file to read, and it requires to input into the array starting from a certain line
example:
4
john 25 M
mary 22 F
lee 20 M
faye 10 F
faye john
mary john
mary faye
i want to insert the friend list, starting 5th line into a 2d array, which is the int from first line +1.
can someone help me with it?
i believe there is a skip method and stuff..
but just dont know how to use it
may someone tell me how to do tat?

the thing is i think that takes too long and it is not efficient..
however...i just solved it with a better method
Scanner in = new Scanner (reader);
int size = Integer.parseInt(in.next());
BufferedReader insert = new BufferedReader(new FileReader(new File(input)));
String line = null;
int count = 0;
int startAtLineNo =size+1; // 0-based
while ((line = insert.readLine()) != null) {
if (count >= startAtLineNo) {
/* do stuff */
System.out.println(line);
// else ignore
count++;
thanks anyways

How to set initial size for mailbox in Exchange 2013?

Hello All!
I've installed Exchange 2013.
Now I'd like to check Backup/Restore of some DataBase.
For thist I look for some way to create Bulk of Mailboxes in DataBase and to set some initial size 50-100Mb for each.
Thanks a lot!
BR,
Pavel

Hi
In your testing creating bulk mailboxes alone will not help . We need to populate some data's in the databases so that the databases are written with some values and they contain some data.
For your testing with backup
First you need to create few number of mailboxes.
Populate those mailboxes by sending more emails.
delete those emails and then try restoring those emails from the backup or if its testing QA server then you can dismount any databases delete few log files and try to restore them from your backup
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

How to skip initial load for SLT to Hana

Similar Messages

Maybe you are looking for