How to skip Pairing the Pen SP3 in MDT 2013?

I have Configured the image to pair the pen but I do not want it to ask to pair until after the image has been completed.
After doing the step below it now asks.
During the 1<sup>st</sup> bootup of the OEM image that ships with the Surface Pro 3 you are prompted during OOBE to pair the pen. In most cases you will probably want to pair the pen after the deployment is complete but if you would like to add
this step to the deployment you can use the following instructions.
Note: The pairing prompt will occur during OOBE so it will interrupt MDT’s automated deployment. Once paired you must click next for it to continue. Ideally this is something IT person would handle for the user before handing over the device to the user.
1. Take one of your existing Surface Pro 3 devices that has the OEM image on it and copy the following files to USB flash drive or other location:
%windir%\system32\oobe\info\default\1033\oobe.xml
%windir%\system32\oobe\info\default\1033\PenPairing_en-US.png
%windir%\system32\oobe\info\default\1033\PenError_en-US.png
%windir%\system32\oobe\info\default\1033\PenSuccess_en-US.png
2. On the MDT server open Deployment and Imaging Tools Environment cmd prompt
3. Use the DISM command to mount the image you are deploying
Dism /mount-wim /wimfile:d:\deploymentshare\operating systems\<name of image>\sources\install.wim /index:1 /mountdir:c:\mount
4. Create the following pathing in the image
C:\mount\windows\system32\oobe\info\default\1033
5. Copy all the files from Step #1 above into this folder
6. Close any explorer Windows and switch to C:\ to make sure no open file handles to the c:\mount folder
7. Unmount the image and save changes
Dism /unmount-wim /mountdir:c:\mount /commit
Is there a way to skip and pair it after the image has been done? Or is it just the way it is with adding this step?

Hi Baxter ,
The step you have posted is used to configure the pen pair during OOBE (during imaging process).
If you don`t want to pair until the image has been completed, we can modify the unattended.xml to skip the OOBE step .
Here is a link for reference(Pay attention to step 9 ,step 10 is optional to configure pen pair during OOBE we can skip it) :
Deploy Windows to Surface Pro 3 using Microsoft Deployment Toolkit
http://blogs.technet.com/b/askcore/archive/2014/07/15/deploy-windows-to-surface-pro-3-using-microsoft-deployment-toolkit.aspx
Best regards

Similar Messages

How do I change the pen pressure in Adobe Elements 11?

I bought Adobe Photoshop Elements 11 in the hopes that I could finally start to draw and color lineart, but I don't know if it's an old and/or atypical version or what, cause I've tried like four or five different tutorials on how to change the pen pressure so that the thickness of the line you draw depends on how hard you push the pen. In all of these tutorials however, I only get as far as to the third or fourth step before they tell me to click an option I don't have. Now I hope that I just haven't found the right tutorial yet or pen pressure can't be modated in Elements 11??

In the pse 11 editor in Expert mode with the Brush Tool selected, click on Tool Options
and then click on Tablet Settings and select, for example, Size

How do I hide the pen line I made a text pathway with?

Hi,
I drew a line with the pen then curved it into an 'S' shape, to make a text pathway. My text is now nicely sitting in an 'S' shape but when I make the line beneath it 100% transparent the text goes transparent too.
Many thanks
Sophie

What Manish said! - Zero stroke or colour of [None].
PS Opacity can affect the object as a whole or just a part of it (frame, text, graphic). Clearly you affected the whole object.

How can I make the pen lines invisible?

I have made lots of edits with the pen tool, and I am noticing that the lines from the pen are a different color than what the shape is I made. Is there a way to make these lines from the pen invisible?
Thanks so much for any help!

Hello Les and Salah,
I appreciate your reply. Unfortunately, all the objects with pen lines have a stroke of 0 pt already... I have a picture to show you what I am working on... The very thin blue lines are my issue. Thank you so much.

How can I use the pen or other tools when the layers are invisible/hide?

Can you please help me?
When I click the "eye" to hide the layer it won't let me use any tools, it was working fine but suddenly stopped and I have no idea what is happening!
I can't finish my work because I need to copy things from a template layer but when I hide the top layer (to see what is down and copy with the pen) it won't work, even with a new layer! o.o
It works fine when the layers are showing but when I hide it everything stops working.
I tried to close illustrator, copy the work and paste in another place but nothing fixes it! Gosh this is so frustrating, I need help please! >__<

That's because I wanna hide the layers to see the image that I'm trying to copy on a new layer that is not hidden. It only works with all the layers showing and I can't copy like this But I figured a way to change oppacity and now I can copy the image! ^^
Thanks for the help <3

How do you change the default font in Outlook 2013?

I am trying to set the default font in Outlook 2013 as per the customer's request and am having no success.
First I create a NormalEmail.dotm file and added it to the Office Customization Tool, created an msp and added it to my package. After installing Office 2013 I check and the NormalEmail.dotm
is on the machine in %appdata%\Microsoft\Templates folder waiting to be loaded. When launching Outlook 2013 on first run it renames my NormalEmail.dotm to NormalEmail15Pre.dotm. I created the file in Word 2013 so it's not a 2010 version and it (NormalEmail15Pre.dotm)
open cleanly in Word 2013 (it does not open in compatibility mode). If I close Outlook and rename NormalEmail15Pre.dotm back to NormalEmail.dotm Outlook opens and uses my template without any issue. This is not a solution as I have 1000's of deployments
and can't do this manually. One other thing, I did have this same problem with the default font in Word 2013 but by implementing a registry setting (HKCU\Software\Microsoft\Office\15.0\Word\Options\MigrateNotmalOnFirstBoot = 1) it used my Normal.dotm
template on first run, if such a setting exists for Outlook I can't find it.
Also I did try to set the font through the mailsettings (HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\MailSettings) in the registry as we did with O2007 and O2010 but
those do not load into Outlook when tweaked.
http://blogs.technet.com/b/odsupport/archive/2009/04/24/how-to-deploy-specific-fonts-in-office-2007.aspx
Thank you for your help.

Hi, I found out how you can set it.
You need two registry keys to be set in order to keep the preloaded settings.(HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\MailSettings)
These are:
[HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\LanguageResources]
"LangTuneUp"="OfficeCompleted"
"OutlookChangeInstallLanguage"="Yes"
both are String entries.

How do I get the pen tool in Adobe Acrabot xi to not select when the Pen is lifted off the tablet for a second?

Need a way to disable selecting when in Pen mode. Want to be able to write or draw on a PDF without selecting anything I've drawn. Currently if I try to write a H or T it will see me lift to go for the cross and it will select the item and then the only option I have is to move it or delete it. I can't annotate or draw on that spot until I hit escape a number of times and then it selects again when I draw on it.

Open the Users folder on the internal drive, drag all of the other home folders to the desktop, and then move the files inside to the desired locations.
(91949)

How do you open the door on a Late 2013 27" iMac to add more RAM ?

I ordered an additional 8GB of RAM before I received my iMac, but now that I have it and ready to add the extra RAM, I can find no mention anywhere of how you go about opening the door on the back of the iMac to access the RAM. Reminds me of the first Systems Analysis lecture I attended which was all about how to write a manual, for example on how to light a cigarette. The first candidate up read out his instructions and they seemed perfect until the instructor told him he hadn't mentioned opening the box of matches.

Installing memory on the new iMacs are a PITA plus a few
The first thing you should do is to unplug the iMac & everything else you have attached to it including the keyboard.
Place the iMac facedown on something soft (couch).
Just below the power cord connection you will see a square box. It pops open if you have the strength of Arnold Schwarzenegger.
With Arnold's strength, you will need to push the RAM into the slots which is no easy task. Make sure you hear a CLICK! The "click" confirms the RAM has been seated correctly.
CLICK CLICK----> iMac (2012/2013) PDF Manual
GOOD LUCK! You're gonna need it.

How can i see the output in Visual Studio 2013

Below is some code rearrange a array, i want to see the result after it's sorted so i add a loop of cout myself, But after runing the code, nothing happened, i didn't see any result from the widow before it closed, any help?
#include<iostream>
const int Red = 1, White = 2, Blue = 3;
void main()
int arr[] = { 1, 1, 2, 2, 1, 3, 1, 2, 3, 3, 1, 1, 3, 2, 1, 2, 1, 3, 2, 1, 1, 3, 2, 1, 3, 1, 3, 2, 2, 3, 3, 3, 1, 2, 1, 2, 1, 3, 1, 2, 3, 3, 1, 2, 1, 2, 1, 2, 2, 1 };
int n = sizeof(arr) / sizeof(int);
int Insert_Red = 0, Insert_White = 0, i;
for (int i = 0; i < n;i++)
if (arr[i]==White)
arr[i] = arr[Insert_White];
arr[Insert_White] = White;
Insert_White++;
if (arr[i]==Red)
arr[i] = arr[Insert_White];
arr[Insert_White] = arr[Insert_Red];
arr[Insert_Red] = Red;
Insert_Red++;
Insert_White++;
for (int i = 0; i < n; i++)
std::cout << arr[i];

i didn't see any result from the widow before it closed
Other choices which don't require any changes to your code:
(1) Set a breakpoint at the last closing brace (assuming that there isn't a
return statement before it - if there is then set the breakpoint on that
return statement).
(2) Put the cursor as described in (1) but instead of setting a breakpoint
use "Run To Cursor" from the menu that pops up when you right-click the
mouse. (Or use Ctrl-F10)
(3) Run your program in the IDE using Ctrl-F5 (Run Without Debugging)
Note that when using these methods, focus *may* remain on the IDE editor. If it
does then your console window with the output will be a background window. You
will then need to switch to it manually from the Taskbar, etc.
Non-related observation:
Standard C and C ++ require that the main() function return an int. e.g. -
int main()
Some compilers will accept void main() so as not to break old code, but new
code should always return an int.
- Wayne

How to skip line for delimited file type?

Hi, i wanna ask how to skip (example: the first two line) for delimited file type?
Thanks...
Here is my script
Function NY_Skip06Center [strField, strRecord]
' FDM DataPump Import Script:
'Created by: FDM_Admin
'Date created: 2/28/2006
Dim strEntity
'Check first two characters of entity
For strEntity = 1 to 6
'Skip line
Res.PblnSKip = True
Next strEntity
End if
End Function
But it returns this error when imported
Error: An error occurred importing the file.
Detail: Object variable or With block variable not set
Anyone knows what's wrong
Edited by: user649207 on Mar 19, 2010 2:15 AM
Edited by: user649207 on Mar 19, 2010 3:04 AM

strAcc = DW.Utilities.fParseString (strField, 1, 1, chr(9))
I didn't look closely enough last time. The above is illogical. The parsestring function parses a string based on a delimiter.
The function has these arguments:
String to Parse
How many fields are in the string
The parsed field to return
Field delimiter
In the above, strField is returning the field specified in your import format. You are also saying that there is a total of 1 field. If that were the case, you wouldn't need to parse anything.
I am guessing that your call needs to look something more like this:
strAcc = DW.Utilities.fParseString (*strRecord*, *8*, 1, chr(9))
Make sense?
If not, maybe you can include a few sample lines from your data file and that will make it easier to help you.
Is your import format fixed or delimited?

Change the pen cursor preference

how do i change the pen cursor as it won't point to where i wanted it to be but about few millimetres away and only draws at certain angles and not free flowing…same goes with my shape tool which draws incrementally rather than free shaping.
i tried to change the preferences but don't know how…pls help

artichie,
And ou may consider whether you are haunted by the Align to Pixel Grid ghost.
If so, you may select everything and then untick Align to Pixel Grid in the Transform pallete, and also untick Align New Objects to Pixel Grid in the flyout options.
You may avoid document types with that as default (RGB for web and the like) or change the default for such documents.

Using the pen tool question

How do I stop the pen tool from wanting to add to paths under what I'm trying to draw when it touches another anchor point?

Ridiculous as it is, in Illustrator you are actually supposed to:
1. Mousedown some distance away from where you want the new path to begin (away from the endpoint of the unselected pre-existing path).
2. Press and hold the Spacebar.
3. Drag to where you want the new path to begin. Mouseup. (The point will be placed without the infernal auto-join behavior.)
4. Release the Spacebar.
The Pen has no business affecting unselected paths by default. It violates the entire meaning of selection. Worst-of-class Bezier drawing interface.
JET

How to Programmatically Pair and Unpair a bluetooth device?

Hi all,
I have a Bluetooth modem, which i want to programmatically Pair & Unpair. Using the available VIs, i could able to search the services and when i try to connect to the device using one service, windows pops-up the dialog to enter the Passkey (during that time, the VI gives an error out). I want to know, how to programmatially pair the device, meaning how to programmatically enter the passkey, so that user doesnot need to do anything using windows.
Thanks,
logic

Here is a vi that lets you pair with a bluetooth device. You need the 32feet in the hand .net package
http://32feet.net/files/
-Regards
eximo
UofL Bioengineering M.S.
Neuronetrix
"I had rather be right than be president" -Henry Clay
Attachments:
Bluetooth discover and Pair.vi ‏51 KB

How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

Ask the headset manufacturer.
Barry

Re: [iPlanet-JATO] How to skip the display of a row in a TiledView ?

Syam--
I am having problems in skiping the display of a row in a Tiled
view. I have a customer search results page. Each customer has an
associated type.While displaying the search results, I should skip the
customer record from display, if the associated type falls in certain
categories.
What I want to tell is, the comment(saying this is equivalent of
repeated_onbeforerowdisplayevent) and placement of the
onbeforerowdisplayevent handler(NetD) code in nextTile() method is
confusing.Agreed. We used to have a seperate row display event, but removed it
because it was extraneous.
I did not find an equivalent way of doing this in JATO ? Can
someone tell me how to do this?There are a couple of options. First, you could write a scriptlet in your
JSP inside the tiled view tag that would check the status of the row and
just skip the HTML output for that row if it matched your criterion. The
other possibility is to override the nextTile() method to do an additional
super.nextTile() call if the row isn't to be displayed. For example,
something like this:
public boolean nextTile()
boolean result=super.nextTile();
if (result && isHiddenRow())
// Skip an extra row
result=super.nextTile();
return result;
Todd

i have the following code here in the renderer n while setting the value in the table how do i pass the value n in the renderer i only have the indexes of the row n col how to check for the value thats not in the table i have commented the code where ever required... kindly help me out with this problem
<Code>
private JTable table = new JTable(){
     public Component prepareRenderer(TableCellRenderer renderer, int rowIndex, int vColIndex) {
          Component c = super.prepareRenderer(renderer, rowIndex, vColIndex);
          if (!isCellSelected(rowIndex, vColIndex)) {//What else should i put in here to check the value
               c.setBackground(Color.yellow);
          else {
               c.setBackground(getBackground());
          return c;
StringBuffer sql = new StringBuffer("Select * from table)
int row = 0;
table.setRowCount(row);
try {
ResultSet rs = //execute SQL
while (rs.next()) {
     table.setRowCount(row + 1);
     table.setValueAt(rs.getString(1), row, 0);
     //This is where i have to change the color
     if(rs.getString("ColumnName").equals("Something")){
          //Change the color of the current row
     row++;
rs.close();
catch (SQLException e) {
</Code>

How to skip Pairing the Pen SP3 in MDT 2013?

Similar Messages

Maybe you are looking for