How to solve BPM system task timeout issue

Guys,
We have a BPM process with couple of human tasks and system tasks.
One particular SYSTEM task is designed to call a web service method synchronously. Because of the complexity in the method, it takes more than 5 minutes for the particular system process to complete. But the BPM process times out by then.
What are the suggested solution to this problem?
1. Increase BPM time out? possible???
2. can we make this synchronous call to asynchronous call using send and receive task???

Hi,
Don't expect that increasing the BPM time-out is a good idea (i also assume it's actually something in Weblogic which has a default 600 second max).
But we often use Send and Receive task in Oracle BPM to call long-running (some up to weeks) generic components/processes.
It works perfect as long as the component can perform a callback operation.
Hope it helps. J@n

Similar Messages

How to solve unable to connect ipad issue

Has anyone been able to solve the unable to connect to network issue?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How to solve High Definition Audio Device issue on Vostro 5470

I have a Vostro 5470 and after installing Windows 8.1 Professional, I'm getting the following issue.
"This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful."
Does any one have any idea how to fix this? I have downloaded the most recent version of the drive from dell support site, but nothing!

Make sure the Windows Audio Service is running.
vmrocha
I have downloaded the most recent version of the drive from dell support site
You can only get the Realtek audio driver from Dell, not the High Definition Audio Device driver. That one is the Windows native audio driver. To update it you would have to let Windows go online to search for an update from Microsoft.
From your screen shot it appears that both the Realtek audio driver and the Windows native audio driver ("High Definition Audio Device") are both showing. Normally only one would show up in the Device Manager. I would try re-installing Windows and not installing any Realtek driver. Without a Realtek driver Windows will install its native driver and produce audio. If it failed to do that then the error would be due to hardware failure or some kind of problem within Windows.

How to solve the report generating performance issue in BI server

->I HAVE USED ONLY ONE PIVOT IN MY REPORT QUERY AND THE REPORT QUERY IS FULLY DEPEND ON ONE FACT TABLE
->IN THE REPORT I AM SHOWING DATA BY MORE THAN 150 COLUMNS.
->I HAVE USED REPORT FUNCTIONS FOR 3 FIELDS IN THE REPORT.ALL THREE REPORT FUNCTIONS JUST ADD TWO COLUMN FIELD AND MAKE IT IN TO ONE COLUMN FILED
->REPORT QUERY INDIVIDUALLY RUNNING BY 2.40 SECONDS.WHEN I USED THAT TO GENERATE A REPORT IT TAKES TO RUN MORE THAN 8 MINS.WHY THIS DELAY?WILL YOU EXPLAIN
Edited by: 873091 on Jul 18, 2011 3:50 AM

Hello Dude,
So from your post I understand that there is a report that basically takes 8 minutes to retrieve the data, but when you get the logical sql from the cache, and run it against the database, it only takes less than 20 seconds to retrieve the same data?
This should never happen. There might be a delay of more 20-40 seconds more than the time taken against the database to load the page elements etc. Is this happening for only this particular report or all reports ? Are you running the query against the same instance's database or a different one?
Try to re-boot all the BI services and run the report again, if the issue still exists, enable caching and try.
Assign points if helpful.
Thanks,
-Amith.

Satellite Pro 4290: How to solve the IDE #1 error issue

I have recently aquired a DVD-ROM drive to upgrade my Sat Pro 4290 optical drive from a CD-ROM to DVD-ROM. As suspected I am having the problem that the drive is not recognised and get the IDE #1 error.
I can get windows XP to recognise the drive by deleting the Secondary IDE Channel in the Hardware and then searching for new new hardware. It then installs the IDE Channel and then finds and installs the DVD-ROM and works fine. I reboot the laptop and back to square one!
I understand it is something to do with the settings on the motherboard and somebody has resolved this by soldering pins to different places on theh IDE connectors.
I do not want to risk this and was wondering if anybody found an easier way of doing this?
Many Thanks

Hi
> I understand it is something to do with the settings on the motherboard and somebody has resolved this by soldering pins to different places on the IDE connectors.
Thats not 100% true. This is not a setting issue on the motherboard but the setting of the CD/DVD drive.
The drive supports different master\slave\c-sel settings and if they are not compatible the BIOS will not recognize the drive correctly.
On the external drives (for desktop PC) its possible to change such settings by switching the jumper but this is not possible to the slim notebooks drives.
The notebook drives settings are stored in the firmware!!
I found different not legal tools which can change the master/slave/c-sel settings but I would not recommend using it.
The risks are too high that the drive will be damage.
So try to replace the drive with a compatible one

How to integrate Barcode system with inventory issues and receipts.

Dear Frndz,
My client would like to like to integrate barcode with the issues and receipts in the inventory.Pl tell me the step by step procedure to do it.
Regards,
Srini

Check these threads
[BarCode Sticker Printing]
[Re: BARCODE PRINTING AND SCANNING OF BATCH IN SAPB1]

Transaction failed for unknown reason (100) Unable to complete backup at this time. Does anyone know how to solve this issue?

Transaction failed for unknown reason (100) Unable to complete backup at this time. Does anyone know how to solve this issue?
Thanks.

The system is set up to backup files to the iCloud at the end of the day. This has ot happen for sometime now and the mesaage I get is the back up error.

Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

Hi the_mad_movies,
It seems like this article will be the best option for addressing this issue:
Error 3194, Error 17, or "This device isn't eligible for the requested build"
http://support.apple.com/kb/ts4451
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.

I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.
I saw the below quote on Adobe forum
"You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each."
If i install each application in single single system the system count is more than two. In this case, are we have any license issue? Please advice how the problem will solve?
If possible please send the advise to my mail id: <Removed by Moderator>
Thanks
Uvaraj S

I already answered that. If you purchased a Suite then you can only install and activate it on two machines. Even if you only insdtall one of the applications of that suite, it counts as one activation of the suite. You cannot take the six or seven different applications that might be in a suite and install and activate them in six or seven different machines... only two machines.
If your scenario will allow for it, one thing you can do is install the programs on all the different machines and only activate two of the machines at any given time. If you need to activate a program on a third machine then you need to deactivate on one of the currently activate machines first so that you have an open activation to use again. I do not remember if there is a limit to the total number of activations you can process for the life of the software.

Backing up - how to solve after copying whole system - login incorrect

Hello,
I have done an script to backup the whole filesystem and restore it. I am making tests before using forever.
For Windows I use ntfsclone and it works perfect, but for ArchLinux I am doing:
I use Knoppix cd-live to manage everything. I load the script from /dev/sda4 (data partition in ntfs) and the main commands to backup and restore are:
Without doing chroot (because it is not possible)
sudo mount /dev/sda5 /media/sda5 #This is the / of ArchLinux
sudo rsync -aAXv /media/sda5/* /media/sda4/seccopy/ --exclude={/media/sda5/dev/*,/media/sda5/proc/*,/media/sda5/tmp/*,/media/sda5/run/*,/media/sda5/mnt/*,/media/sda5/media/*,/media/sda5/lost+found,/media/sda5/home/*,/media/sda5/var/lib/pacman/sync/*}
cd /media/sda4/seccopy/
sudo tar -zcvf /media/sda4/arch_copy.tar.gz ./*
To restore:
sudo mount /dev/sda5 /media/sda5
sudo rm -r /media/sda5/*
sudo tar -zxvf /media/sda4/arch_copy.tar.gz -C /media/sda5
I can check that the files are copied correctly.
I can do (and really do) the same with the home partition, same process but changing sda5 by sda6, and instead of arch_copy.tar.gz, arch_home_copy.tar.gz
When I restart to boot in the new copied system... the problem:
I go to the normal grub option for Arch Linux and I try again to put the password for ussr1, and nothing.
I type it, enter, wait some seconds and prompt me again.
I try with the root user, and its password, and the same problem. Not access to the system.
I try in tty1, and the same problem, it says:
Login incorrect
First question: How to solve this situation?
I think maybe the problem is something about /etc/passwd or /etc/shadow, and also I try to make chroot to see if it works.
If I try to do chroot from Knoppix to the ArchLinux restored, it is not possible, everything goes ok from this wiki:
https://wiki.archlinux.org/index.php/Change_Root
but fails in this:
Note: If you see the error chroot: cannot run command '/bin/bash': Exec format error, it is likely that the two architectures do not match.
I don't know what is "architectures". I installed x86_64 in ArchLinux.
Second question: Is because the Knoppix 7.0.4 (debian based) uses other? Like i686?
I see in Internet this:
http://www.cyberciti.biz/tips/recoverin … -file.html
It is not my problem, but maybe it is a way to know if is correct or not,...-
mode "recovery", edit, add to linux line after "ro single": init=/bin/bash
Ctrl+x
Logged as root automatically:
Third question: Why is not prompted the password? And illegitimate user can see everything doing this.
$ mount -rw -o remount /
$ mount -rw -o remount /home
mount: /home not mounted or bad option
In some cases useful info is found in syslog -try
dmesg | tail or so
Fourth question: Why i cannot mount the home? It is in the /dev/sda6, but for the / it didn't say anything to me. I cannot see the /home directory.
$ cat /etc/passwd
#- Has the root user and the ussr1 user
$ cat /etc/shadow
#- Has the root and ussr1 password coded.
$ passwd
Enter new UNIX password:
Retype new UNIX password:
Fifth question: Why is not prompted for the before password? (following the steps i can imagine that this doesn't work, so, is not a security problem)
$ passwd ussr1
Enter new UNIX password:
Retype new UNIX password:
$ sudo reboot:
sudo: /usr/lib/sudoers.so must be only be writable by owner
sudo: fatal error, unable to laod plugins
$ reboot
Failed to talk to init daemon.
$ exit
exit
[ 377.105707] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
[ 377.105707]
Sixth question: Why I cannot exit correctly? It also happen if I use the Arch in Live mode (and try to exit).
The only way to avoid this problem is unpluging from electrical power (not even with the power button).
I start the system again, I go to the normal grub option for Arch Linux and I try again to put the password for ussr1, and nothing.
I type it, enter, wait some seconds and prompt me again.
The same as first question: How to solve this situation?
My idea is only use Knoppix live-cd to use as backup/restore system, but if it is not possible, I would like to know how to solve.
The idea of using rsync instead of dd is because I want to save only the data, and not all the sectors (not enough space in the hard disk).
I don't mind to have to use arch linux usb installation media as it is "knoppix live-cd", the only thing I would like to use is the same media to do all the operations, because I want to teach normal users how to do it by themselves.

cfr wrote:What's the exit value when you run passwd? (man passwd will show what the exit values mean.)
value 0 -> success
cfr wrote:Have you tried changing the password to something *other* than the existing password?
tried for example with "something" for both, "root" and "ussr1"
but if I go to /etc/shadow, I see that the passwords coded for root and ussr1 are not the same, so must be coded with other things too.
cfr wrote:Have you tried creating a new user and logging in as that user?
I added another user, for example "try"
useradd -m -g users -s /bin/bash try
passwd try & echo "$?"
.. (something)
0
Ok, after just add the user, if I go to /home/ I can see some files created automatically, and if I compare those files with the files that I pasted in my ussr1 account, there are two that are missed:
.xinitrc
.xsession
xinitrc is executed by startx (so, it is because the X11..)
and..ok, xsession the same (xdm/gdm/kdm). So nothing here.
I also add "try" to the groups: lp, games, video, audio, optical, storage, scanner with:
gpasswd -a try lp
cfr wrote:Have you run pwck and grpck to check the integrity of the files? (I doubt this is the issue but it seems an easy step to do just on the off chance.)
Ok, if I do:
$ pwck; echo "$?"
0
$ pwck /etc/passwd; echo "$?"
0
$ pwck /etc/shadow; echo "$?"
invalid password file entry
delete line 'root:ahskldfhajksdfkahsjkdhf...asdkfhjashdkfjh:15795::::::'?
invalid password file entry
delete line 'bin:x:14871::::::'?
so forth..with: root, bin, daemon, mail, ftp, http, uuidd, dbus and nobody
user 'ussr1': directory '7' does not exist
user 'polkitd': directory '7' does not exist
user 'usbmux': directory '7' does not exist
user 'mysql': directory '7' does not exist
invalid password file entry
delete line 'kdm:!:15793::::::'?
invalid password file entry
delete line 'avahi:!:15793::::::'?
user 'try': directory '7' does not exist
pwck: no changes
2
$grpck /etc/group; echo "$?"
0
$grpck /etc/gshadow; echo "$?"
invalid group file entry
delete line 'root:::root'?
invalid group file entry
delete line 'root:::root'?
invalid group file entry
delete line 'root:::root'?
...so forth
with: root, bin, daemon, sys, adm, tty, disk, lp, mem, kmem, wheel, ftp, mail, uucp, log, utmp, locate, rfkill, smmsp, http, games, lock, uuidd, dbus, network, video, audio, optical, floppy, storage, scanner, power, nobody, users, systemd-journal, polkitd, usbmux, mysql, kdm, avahi
grpck: no changes
2
So, cat /etc/gshadow | wc -l = 40 lines
And grpck /etc/gshadow | wc -l = 40 lines
And the same for /etc/shadow = 16 lines and the pwck were 11 "delete line" and 5 "directory '7' does not exist"
But as we see, even the try has some error... in this case with directory '7'.
I don't understand why errors... theoretically they were copied and pasted without modifications
NOTE** Ok, my fault, I have to execute the command like this: $ pwck -r /etc/passwd /etc/shadow; echo "$?" and now it answers: 0 So, the integrity of both files are correct! And the same with group and gshadow
ewaller wrote:
Inside the chroot, run pacman -Qk | grep -v ", 0 missing"
And see if there are any packages that should be reinstalled.
If not, reinstall pam, just for good measure
With
$pacman -Qk | grep -v ", 0 missing"
no results.
I execute it without doing anything before with pacman, no updating, absolutely nothing.
pam?
i search for pam, and i find "pam mount", something like "encrypted home". But Was it activated by default?
Last edited by Zzipo (2013-03-31 21:57:57)

How to solve 'Payment processing is temporarily unavailable' issue ???

Does anyone know how to solve the above problem?
Trinidad was just added to the list of iTunes stores and I am trying to set up my credit card with my ID but I keep getting that error when I click 'Done' to complete the process.

Hi Ayu ... this was the info I used when filing the complaint. The follow up was conducted via email between the rep and myself.
First Name : **********
Last Name : **********
Email : **********
Lang_Country : en_US
Product : iTunes Store
Support Subject : Account Management
Sub Issue : iTunes Store account billing
GCRM Case ID : **********
See additional info below
What device did you use to connect to the store? Windows computer (PC)
Which operating system is installed? Windows 7
What version of iTunes is installed on your computer? iTunes 10.3
Choose the iTunes Store or App Store for your country: Other
Please select your country: Trinidad & Tobago
Details:
Hi good day.
My country was only listed yesterday in the iTunes store, Trinidad and Tobago. I was trying to set up my credit card (VISA) to make some purchases but when i entered the info and clicked 'Done' I keep getting the following message;
'Payment processing is temporarily unavailable. Please try again later'
How to fix this?
I have tried on 2 different PC's, both running Windows7 and even from on my iphone itself, bt still get the same error.

TS4002 Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4 SMTP err

Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4
SMTP error from remote mail server after RCPT TO:<[email protected]>:
host mx6.me.com.akadns.net [17.158.8.114]: 550 5.7.0 Blocked - see https://support.proofpoint.com/dnsbl-lookup.cgi?ip=184.173.9.56:
[email protected]
i do alse receive from gmail....
please help... what is happening!!!!

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

How to solve this problem, pls help when I try to see remote camera system from home."Dual streaming is required for HTML viewing"

How to solve this problem, pls help when, I try to see remote camera system(spec dvr) from home. The Error I get is "Dual streaming is required for HTML viewing"

I had the same probelm and found that the problem lies with 64bit programs such as safari and microsoft internet explorer. I have resolved the issue on my PC based server by using a 32 bit ie and same on my mac by using the same running windows under parallels.
So far the problem with the 64 bit side of it is still to be resolved.
Hope this helps and gets you guys up and running until suchtime a 64 bit solution is found.
Craig

Hai when my iphone 5 connet to my windows 7 error massege is blink on my system the error code is oxe8000084 how to solve my problem

hai when my iphone 5 connet to my windows 7 error massege is blink on my system the error code is oxe8000084 how to solve my problem

https://discussions.apple.com/message/22296149#22296149
more from the google I did
iphone error 21

I have lost my toolbar and task bar. I have tried all the sugestions on this site to no avail. I don't know how to try a system restore with out them.

I was enlarging pictures on Facebook to full screen. When i went to move on. All my tool bars and my task bar have disappeared. I have tried all the suggestions on this site to no avail. I don't know how to do a system restore without my task bar, and don't want to lose my book marks. Please help, i can't grt to my important favorite sites.

Can you launch a new window (Ctrl+n for a normal window, Ctrl+Shift+p for a private window) that has the usual complement of toolbars? If a new window also is missing bars, try using the View menu > Toolbars list to restore them. If the classic menu bar is not displayed, usually tapping the Alt key or the F10 key will show it temporarily.

How to solve BPM system task timeout issue

Similar Messages

Maybe you are looking for