How to solve the SMTP server issue.
I did the migration from SharePoint 2010 to SharePoint 2013 , the workflow emails are sent perfectly in SharePoint 2010 but when i configure the SharePoint 2013 the following error has occurred.
Error : The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Please let me know if you aware of this.
-Thanks,
Swapnil
That's pretty much all the settings you need to do on the SharePoint side. Does the SMTP server that you are pointing to allow incoming emails from your SharePoint server IP Address? It might only allow relay services to specific IP ranges.
Or maybe you have a firewall that is blocking it?
Similar Messages
-
How to setup the SMTP server in Oracle apps?
Hi,
How to setup the SMTP server in Oracle Apps? Is it mandatory to keep the SMTP server on the same host where the Oracle data base is installed? Also can someone help how we can set up the SMTP server on different host (not the Database server) and we can use the same for Workflow notification mailer.
Thanks,
Bijoy
Edited by: user12070886 on Feb 6, 2013 4:26 AM
Edited by: user12070886 on Feb 6, 2013 4:27 AMHow to setup the SMTP server in Oracle Apps? Is it mandatory to keep the SMTP server on the same host where the Oracle data base is installed? No, it is not mandatory. Also please note that the mails are sent out from concurrent manager mode. Not from the database node.
Also can someone help how we can set up the SMTP server on different host (not the Database server) and we can use the same for Workflow notification mailer.
>
It depends on the operating system you are using. If you are using *nix then sendmail needs to be configured.
Thanks -
How to configure the smtp server..
i had an error when running the java mail program..
this is my program
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import java.io.*;
import java.util.Properties;
public class MailClient
public void sendMail(String mailServer, String from, String to,
String subject, String messageBody,
String[] attachments) throws
MessagingException, AddressException
// Setup mail server
Properties props = System.getProperties();
props.put("mail.smtp.host", mailServer);
// Get a mail session
Session session = Session.getDefaultInstance(props, null);
// Define a new mail message
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
// Create a message part to represent the body text
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText(messageBody);
//use a MimeMultipart as we need to handle the file attachments
Multipart multipart = new MimeMultipart();
//add the message body to the mime message
multipart.addBodyPart(messageBodyPart);
// add any file attachments to the message
// addAtachments(attachments, multipart);
// Put all message parts in the message
message.setContent(multipart);
// Send the message
Transport.send(message);
protected void addAtachments(String[] attachments, Multipart multipart)
throws MessagingException, AddressException
for(int i = 0; i<= attachments.length -1; i++)
String filename = attachments;
MimeBodyPart attachmentBodyPart = new MimeBodyPart();
//use a JAF FileDataSource as it does MIME type detection
DataSource source = new FileDataSource(filename);
attachmentBodyPart.setDataHandler(new DataHandler(source));
//assume that the filename you want to send is the same as the
//actual file name - could alter this to remove the file path
attachmentBodyPart.setFileName(filename);
//add the attachment
multipart.addBodyPart(attachmentBodyPart);
public static void main(String[] args)
try
MailClient client = new MailClient();
String server="smtp.canvasindia.com";
String from="[email protected]";
String to = "[email protected]";
String subject="Test";
String message="Testing";
String[] filenames ={"c:/A.java"};
client.sendMail(server,from,to,subject,message,filenames);
catch(Exception e)
e.printStackTrace(System.out);
the error is .................
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected from p
ool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1196)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:584)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at MailClient.sendMail(MailClient.java:47)
at MailClient.main(MailClient.java:84)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected fro
m pool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1047)
... 5 more
how to configure the smtp server in my machine..
please guide me...This uses gmail account, and gmail smtp
* MailSender.java
* Created on 14 November 2006, 17:07
* This class is used to send mails to other users
package jmailer;
* @author Abubakar Gurnah
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
public class MailSender{
private String d_email,d_password;
* This example is for gmail, you can use any smtp server
* @param d_email --> your gmail account e.g. [email protected]
* @param d_password --> your gmail password
* @param d_host --> smtp.gmail.com
* @param d_port --> 465
* @param m_to --> [email protected]
* @param m_subject --> Subject of the message
* @param m_text --> The main message body
public String send(String d_email,String d_password,String d_host,String d_port,
String m_from,String m_to,String m_subject,String m_text ) {
this.d_email=d_email;
this.d_password=d_password;
Properties props = new Properties();
props.put("mail.smtp.user", d_email);
props.put("mail.smtp.host", d_host);
props.put("mail.smtp.port", d_port);
props.put("mail.smtp.starttls.enable","true");
props.put("mail.smtp.auth", "true");
//props.put("mail.smtp.debug", "true");
props.put("mail.smtp.socketFactory.port", d_port);
props.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
props.put("mail.smtp.socketFactory.fallback", "false");
SecurityManager security = System.getSecurityManager();
try {
Authenticator auth = new SMTPAuthenticator();
Session session = Session.getInstance(props, auth);
//session.setDebug(true);
MimeMessage msg = new MimeMessage(session);
msg.setText(m_text);
msg.setSubject(m_subject);
msg.setFrom(new InternetAddress(m_from));
msg.addRecipient(Message.RecipientType.TO, new InternetAddress(m_to));
Transport.send(msg);
return "Successful";
} catch (Exception mex) {
mex.printStackTrace();
return "Fail";
//public static void main(String[] args) {
// MailSender blah = new MailSender();
private class SMTPAuthenticator extends javax.mail.Authenticator {
public PasswordAuthentication getPasswordAuthentication() {
return new PasswordAuthentication(d_email, d_password);
} -
Where(How to change the SMTP- Server
Hello,
i'm using the OAS 10.1.2.0.2
While installation OAS i entered the name of the actual working SMTP- Server.
Sending mails worked fine until today.
Now the name of the SMTP- Server has changed and i wanted to change it(the name) in the Application Server, but i didn't find one/all place(s) where i had to change the name(s) of the SMTP- Server.
Is there anyone who can help me??
Thanks a lot.
Best regards.
FlorianRefer this:
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/reconfig.htm#sthref681
Thanks
Shail -
How to find the smtp server on a linux box?
Hello,
I am trying to set up Notification Methods in OEM and I need to know the SMTP server and port. Which command can I use on Linux to find this information? Thank you in advance.Netstat is not necessarily the right tool for this task.
Sorry, but "netstat -a | grep 25" will not be useful. For example:
netstat -a | grep 25
unix 2 [ ] DGRAM 128925
unix 3 [ ] STREAM CONNECTED 11825 Better grep for "smtp". For example:
netstat -a | grep smtp
tcp 0 0 vm015.example.com:smtp *:* LISTEN
lsof is a better tool, but requires "root" or superuser privileges. For instance:
lsof -i :smtp
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
sendmail 3098 root 4u IPv4 13077 TCP vm015.example.com:smtp (LISTEN)Keep in mind however that processing and routing email in is usually a more complex task and involves either to know firewall and mail gateway configurations, or ask your mail administrator. The local mail server may not be permitted to relay email to the company wide smtp gateway depending on routing policies. -
SOLUTION - How to solve the TOS0002 error issue
Hi
I have had a problem with boot error tos0002 after Ghosting image to a new drive.
I have resolved it by copying the BOOTSECT.BAK from the Vista disc to the C: drive.
I just copied and kept the old one as you can with Vista but I guess it may be similar with XP.
I reinstalled the Qosmio player from the respective disc.
I hope this helps someone because I have spent ages trying to find a fix.Thanks for this information Emma.
Its always nice to see people who post useful solution proposals
Greets -
Dear sirs,
how to solve the mail problem which occurs while I am abroad; bearing in mind that I use HOTSPOT and sometime it's sending emails sometime getting the below messages " SMTP Relay "Message rejected"The outgoing mail server is rejecting mail from your network address. Typically that happens when your mail service provider is also your ISP, and you connect to it from another network. The SMTP server will allow connections without a password from anywhere, but it will only relay mail from within the ISP's network. It could also be that your account on the server has expired or been suspended.
If you need to send mail from outside your ISP's network, use an independent mail service provider. I don't have a specific recommendation. -
How can i solve the vpn server could not be found error on my iphone 5s?
how can i solve the vpn server could not be found error on my iphone 5s?
FWIW, back at work we have a Palo Alto Networks firewall and VPN. Have configured both the iPhone and the iPad with the pertinent details.
If I connect while in the premises (same LAN), connection is instantaneous and flawless.
If I connect while away, no matter which external network, the first attempt to connect ALWAYS fails with a NOT FOUND error. Yet if I try again immediately after, it ALWAYS connects with no further issues. -
How to solve the issue "OEL 5.6 boot Oracle ASMLib driver: FAILED" ?
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer.
I downloaded Oracle Linux 5.6 Media Pack for x86_64 (file name V24479-01) from https://edelivery.oracle.com/linux.
I have installed OEL 5.6 for VM rac1 and done the follows:
1) install rpm and oracleasm packages for rac1.
2) edit /etc/hosts to set up IP addresses for eth0 and eth1 for rac1 and rac2.
3) edit eth0 and eth1 for rac1 by using command [root@rac1 \]# neat
But when boot the OS, I see "initializing Oracle ASMLib driver: FAILED".
When configure Oracle ASM library driver by running the command:
[root@rac1 /]#/etc/init.d/oracleasm configure -i
Its output "initializing Oracle ASMLib driver: FAILED"
I think the reason is the OS cannot initialize Oracle ASMLib driver. My question is:
Do any folk understand how to solve the issue "OEL 5.6 boot Oracle ASMLib driver: FAILED" ?
Thanks.Folks,
Hello. Thanks a lot for replying. OEL 5.6 comes with 2 kernels: uek and red hat
I have chosen to use red hat kernel for 64-bit. I run the following command:
[root@rac1 /]# uname -rm
Output: 2.6.18-238.el5x86_64
I have downloaded 4 files for this version of kernel from
http://www.oracle.com/technetwork/server-storage/linux/downloads/rhel5-084877.html as below:
oracleasm-2.6.18-238.el5xen-2.0.5-1.el5.x86_64.rpm
oracleasm-2.6.18-238.el5debug-2.0.5-1.el5.x86_64.rpm
oracleasm-2.6.18-238.el5-debuginfo-2.0.5-1.el5.x86_64.rpm
oracleasm-2.6.18-238.el5-2.0.5-1.el5.x86_64.rpm
I have installed the 4 files and got the error messages for the first 2 files as below:
[root@rac1 /]# rpm -ivh /home/oracleasm-2.6.18-238.el5xen-2.0.5-1.el5.x86_64.rpm
Error: Failed dependencies: kernel-xen=2.6.18-238.el5 is needed by oracleasm-2.6.18-238.el5xen-2.0.5-1.el5.x86_64.rpm
[root@rac1 /]# rpm -ivh /home/oracleasm-2.6.18-238.el5debug-2.0.5-1.el5.x86_64.rpm
Error: Failed dependencies: kernel-debug=2.6.18-238.el5 is needed by oracleasm-2.6.18-238.el5debug-2.0.5-1.el5.x86_64.rpm
The last 2 files have been installed successfully. But when reboot Oracle Linux Server-Base 2.6.18-238.el5, I still see :
"Initializing ASMLib driver: FAILED."
[root@rac1 /]#/etc/init.d/oracleasm configure -i
Its output "initializing Oracle ASMLib driver: OK "
My questions are:
Does the issue OS "Initializing Oracle ASMLib driver: FAILED" have effect later ? Do we need to solve it ?
Thanks. -
How do i create a mail box in the SMTP server thru a java program
How do i create a mail box in the SMTP server thru a java program. If it is possible thru a java program.pls suggest a mail server compatible for the above possibility to work.
pls help ....Please let me know if it is not at all possible to
create a user account automatically thru a program
(java) in a mail server... how does yahoo work
then..does he manually add a user to the mail
server...By talking to a web server not a mail server.
>
Is not there any mail server that will allow us to
create mailboxes for my java program.. how do the
other web account services work..
As I said mail servers do have management interfaces. You need to find one and then determine what the management interface is. -
How to find out about the SMTP Server
Hi,
I have been trying to configure groupware in the portal - in particular I want to enable the sending of emails through the portal. I already have a how-to-guide that that seems to explain the steps quite well. However, it mentions that I need to know the SMTP Server of the email. Can you tell me how to find out about the SMTP Server? Where do I need to look for the name of it?
Thank you and regards,
KatharinaHi Katharina,
you need the SMTP server of your company. This means you can't look for it in the portal, but have to ask the responsible person in your company.
Kind regards,
dominik -
How to solve the issue "CUV check user equivalence failed" ?
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
In order to install Grid Infrastructure, we need to run Cluster Utility Verification (CUV) at first by running the cammand below:
[ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Its output:
Performing pre-checks for cluster services setup
Check: User equivalence for user “ora11g”
Node Comment
rac1 failed
rac2 failed
Result: PRVF-4007 : User equivalence check failed for user “ora11g”
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
Pre-check for cluster services setup was unsuccessful on all the nodes.
As you see above, check user equivalence failed. I have run the 4 commands to fix this error as below:
[ora11g@rac1 /]$ ssh-keygen
Its output:
Generating public/private rsa key pair.
Enter file in which to save the key (/home/grid/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/grid/.ssh/id_rsa.
Your public key has been saved in /home/grid/.ssh/id_rsa.pub.
The key fingerprint is:
0c:10:6c:3b:ae:21:63:64:f8:0d:0e:d8:f0:41:32:ff [email protected]
[ora11g@rac1 .ssh]$ cat *pub >>authorized_keys
[ora11g@rac1 .ssh]$ ssh rac1
Its output:
The authenticity of host ‘rac1 (127.0.0.1)’ can’t be established.
RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ‘rac1′ (RSA) to the list of known hosts.
Write failed: Broken pipe.
[ora11g@rac1 .ssh]$ ssh rac1-priv
Its output:
The authenticity of host ‘rac1-priv (192.168.137.35)’ can’t be established.
RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ‘rac1-priv,192.168.137.35′ (RSA) to the list of known hosts.
Write failed: Broken pipe.
After run the 4 commands above, I run the command below again:
[ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Its output is the same:
PRVF-4007 : User equivalence check failed for user “ora11g”
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
I think the problem is "Broken pipe" and ssh cannot write authorized_keys to the machines.
My question is:
Do any folk understand how to solve the issue CUV "check user equivalence failed" for 2 VMs ?
Thanks.Folks,
Hello. Thanks a lot for replying.
I have installed Grid Infrastructure a few times. Each time, on step 7 of 9, the installer fixes and checks 2 machines correctly. The entire installation has 3 parts as below:
1) Install Grid Infrastructure for a Cluster
2) Execute Root Scripts for Install Grid Infrastructure for a Cluster (script is root.sh)
3) Configure Oracle Grid Infrastructure for a Cluster that includes NCA, ASMCA, PICA and CVU.
Each time, on step 8 of 9, the Installer installs Grid Infrastructure for a Cluster successfully that includes "Prepare, Copy files, Link binaries, Setup files and Perform remote operations".
But when the Installer get to part 3 CVU, it fails and then the Database cannot be installed.
Deinstall Grid is a very complicated process to do. Because of this reason, we need to run CVU at first to make sure everything is correct for 2 machines before install Grid.
Even we ignore "user equivalence (ssh)", we don't know whether other items can be passed or not because CVU cannot proceed to check the machines.
My question is:
How to have the script "runcluvfy.sh" continue to check the machines while confronting "user equivalence failed" ? -
The "edit in" menu is completely inactive. All plug-ins are visible but in light grey; i.e. not accessible. Any idea how to solve the issue? Fyi: I am using LR 5.7.1 on MacBook with Mawericks.
Jim, that sounds like a good hypothesis. Yes, I am using smart previews. I have my originals on an external drive which is connected. Still, LR can not find them. Do you know how to tell LR where to find the originals? I would like LR to identify the source automatically: if external drive is connected LR should show "original and smart preview" not only "smart preview". Thanks for your help.
-
I have set up a new email account however it is unable to connect to the smtp server as it seems to be offline - how do i take the smtp server online?
the smtp server is the property of the mail provider and running in their server room
talk to them
and make sure the ports required by the mail providers smtp server are not blocked by your firewall or by your router or by your isp -
How do i solve the activate app issue in DPS App Builder?
I have no apps showing up in the download section of DPS App Builder.
And on the App Status section, I am being prompted to activate app?
Can anyone help please?I have a creative cloud subscription.
Sent from Samsung MobilePrabhjyot Kaur <[email protected]> wrote:Re: How do i solve the activate app issue in DPS App Builder?
created by Prabhjyot Kaur in Digital Publishing Suite - View the full discussion
If you are DPS single edition user, then you need to enter serial number to activate app.
But it would be more helpful if you let us know which DPS edition you have?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4853715#4853715
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4853715#4853715
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4853715#4853715. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Maybe you are looking for
-
How to uninstall printer drivers
I have a 64Gb MacBook Air and installed the printer drivers for an HP printer. Within a few hours of using the printer, three major faults occurred, so I returned the printer and got my money back. I'm going to buy a Canon printer now but first I w
-
How to get the Survey result with a External Provider
Hi all We have an scenario where we create a Survey and it's executed for a third party, and then they send to us the results for example in a excel sheet. Some know how we can upload the survey results per each client into CRM, Best Regards.
-
Strange behaviour when embedding HTML page in Air
Hi, I'm trying to embedd a HTML page to a Air application. The HTML page has a simple Flex application (TestFlex4Project.mxml) with a button that changes one HTML element on the web page (TestFlex4Project.html) using ExternalInterface. If I run the F
-
Hello, I'm trying to build a small webapplication in JSP that is showing a table in a browser. I'm using a tag from the Business Components Data Tags library. So in the JSP-page I have: <%@ taglib uri="/webapp/DataTags.tld" prefix="jbo" %> <jbo:Appli
-
Good morning - I have a 17" iMac G4 800 (no Airport Card - cable connected to the Airport base station) and a 12" PowerBook G4 133, networked with Airport Extreme. I connect to the internet via DSL with a Siemens Speedstream 4100. My ISP claims downl