How to sort internal tables of unknown structure?

Hello
Itab is an internal table of unknown structure with field F1 and many other.
How to sort this table by field F1 is the structure is unknown?
SORT ITAB by F1 ascending.
Thanks

Hello,
Which version of SAP are you using?
As of Release 701, you can specify the fields dynamically by specifying the fields in an internal table of type ABAP_SORTORDER_TAB. Further read can be found here: [SORT by (otab)|http://help.sap.com/abapdocu_702/en/abapsort_itab.htm#!ABAP_ADDITION_5@5@].
For prior releases you can try something like this:
SORT itab BY ('F1') ('F2) ... ('Fn')
Hope this helps.
BR,
Suhas

Similar Messages

Internal table of unknown structure as a importing parameter of FM

Hello
I need to build FM that performs the following operations :
1. gets the internal table of unknown structure on the input
Its known that table has key fields of K1 , K2 , K3 and numerical fields of N1, N1.The other fields are unknown
2. Populate fields N1, N2 with values (logic is clear and simple)
3. Return table
Can you please recommend me which way I should go. Some examples are very welcome
THanks

Hi,
In your tables parameter enter the name of the table with out any type. This was you may be able to use it dynamically. Next create another importing parameter as table type. there you will pass the type of the table. Now if you have these information then you should be able to define a field-symbol in the FM and do the manipulation.
Regards
Prasenjit

How to create internal table for a structure in BSP

hi ,
I have created a Structure in BSP.I want to create an internal table for that Structure. But in my coding ie.
<% data: begin of itab_1 .
 include type zuvendstr.
 data:end of itab_1.
 data wa_str like line of itab_1.
 loop at itab_1 into wa_str. %>
 <tr>
 <td><%=wa_str-name%> </td>
 <%endloop.%>
In this zuvendstr is Structure ,wa_str is workarea and itab_1 is an Internal table.But it is showinng an error that itab_1 is unknown.But we cannot define internal tables for an Structure in Page Attributes.So,please resolve how to create internal table for Structure in BSPS

Hi,
You can define itab_1 like this (assuming zuvendstr is a structure type):
DATA: itab_1 TYPE TABLE OF zuvendstr.
Regards,
Tanguy

How to sort internal table

Hi
How to sort internal by binary search...please don't suggest SORT TABLE or HASHED table to use...

hi,
Use SORT Statement....
i.e,
sort itab.
Here is the code
TYPES: BEGIN OF PERSON_TYPE,
NAME(10) TYPE C,
AGE TYPE I,
COUNTRY(3) TYPE C,
END OF PERSON_TYPE.
DATA: PERSON TYPE STANDARD TABLE OF PERSON_TYPE WITH
NON-UNIQUE DEFAULT KEY INITIAL SIZE 5,
WA_PERSON TYPE PERSON_TYPE.
WA_PERSON-NAME = 'Muller'. WA_PERSON-AGE = 22.
WA_PERSON-COUNTRY = 'USA'.
APPEND WA_PERSON TO PERSON.
WA_PERSON-NAME = 'Moller'. WA_PERSON-AGE = 25.
WA_PERSON-COUNTRY = 'FRG'.
APPEND WA_PERSON TO PERSON.
WA_PERSON-NAME = 'Möller'. WA_PERSON-AGE = 22.
WA_PERSON-COUNTRY = 'USA'.
APPEND WA_PERSON TO PERSON.
WA_PERSON-NAME = 'Miller'. WA_PERSON-AGE = 23.
WA_PERSON-COUNTRY = 'USA'.
APPEND WA_PERSON TO PERSON.
SORT PERSON.
SORT PERSON BY NAME AS TEXT
SORT PERSON DESCENDING BY COUNTRY AGE NAME.
SORT PERSON DESCENDING BY AGE ASCENDING NAME AS TEXT.
Reward if it helps,
Regards,
Santosh

How to make copies of internal table with unknown structure?

Dis is the detailed description of a problem i have and i
tried all i can to solve it without satisfied results.
I want to copy an internal table of a type defined in the
ABAP program itself, not dictionary. I have a function
that is supposed to accept the internal table as a
parameter of type 'any table'. The function should create
the new internal table using the field catalog of the
passed 'any table' and then create a new internal table
using "create_dynamic_table" and return the DATA pointer.
If anyone knows how it is done pls help me out.
I would like to get the field catalog of the following
internal table automatically by using some sap function..
TYPES:
BEGIN OF MYTYPE,
NAME TYPE SOMEZTABLE-NAME,
AGE TYPE SOMEZTABLE-AGE,
END OF MYTYPE.
DATA:
IT_TABLE TYPE TABLE OF MYTABLE INITIAL SIZE 0.
DATA:
COPY_OF_IT_TABLE TYPE REF TO DATA.
SELECT NAME AGE INTO TABLE IT_TABLE FROM S0MEZTABLE.
PERFORM CREATECOPY USING IT_TABLE CHANGING COPY_OF_IT_TABLE.
FORM CREATECOPY
USING
 IT_TABLE TYPE ANY TABLE
CHANGING
 COPY_OF_IT_TABLE TYPE REF TO DATA.
[ Here i would like to create a copy the passed
internal table and return a reference to it. I donot want
to refer to the same table passed. I guess the use of
function CREATE_DYNAMIC_TABLE in the CL_ALV_TABLE_CREATE
clss is required. ]
ENDFORM.

Ravi,
If all you want to do is to copy this into another table, why can't do something like this.
TYPES:
BEGIN OF MYTYPE,
NAME TYPE SOMEZTABLE-NAME,
AGE TYPE SOMEZTABLE-AGE,
END OF MYTYPE.
DATA:
IT_TABLE TYPE TABLE OF MYTABLE INITIAL SIZE 0.
DATA: COPY_OF_IT_TABLE TYPE REF TO DATA.
SELECT NAME AGE INTO TABLE IT_TABLE FROM S0MEZTABLE.
FIELD-SYMBOLS : <FT_COPY_TABLE> TYPE ANY TABLE.
Call Method CL_ALV_TABLE_CREATE->CREATE_DYNAMIC_TABLE
Exporting
IT_FIELDCATALOG = T_FIELDCAT
Importing
EP_TABLE = COPY_OF_IT_TABLE
ASSIGN COPY_OF_IT_TABLE->* TO <FT_COPY_TABLE>
However, this is provided you already have a field catalog. Now in this case we have not created a field catalog. So, for that
data : BEGIN OF MYTABLE OCCURS 0 WITH HEADER LINE
NAME TYPE SOMEZTABLE-NAME,
AGE TYPE SOMEZTABLE-AGE,
END OF MYTABLE.
Now, create the field catalog.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
 I_INTERNAL_TABNAME = 'MYTABLE'
CHANGING
 CT_FIELDCAT = T_FIELDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
This should create the field catalog.
Regards,
Ravi

How to find min and max of a field from sorted internal table

Hi,
I have sorted Internal Table by field f1.
How do I find max and min value of f1.
For min value of f1 I am using,
READ TABLE IT1 INDEX 1.
IT1-F1 = MIN.
Is this correct? And how do I find the max value of f1 from this table.
Thanks,
CD

Yes, that is right, and you can get the max like this.
data: lv_lines type i.
* get min
READ TABLE IT1 INDEX 1.
MIN = IT1-F1.
* get max
lv_lines = lines( it1 ).
read table it1 index lv_lines.
MAX = IT1-F1.
Regards,
Rich Heilman

Create dynamic internal table with dynamic structure

I have an internal table itab1 that have 12 amount fields from period1 thru period12. I need to create a dynamic table with dynamic structure for the period column if the total amount of each column is > 0. Any idea on how to do that?
For example if my itab1 has 20 rows and the sum of period1 = 35, sum of period2 = 0, sum of period3 = 5, sum of period4 =0, sum of period5 = 2 then I need to create a dynamic structure for the field column that have the total > 0, i.e structure struct1 have field period1, period3 and period5 only. Then I will need to load the data to itab2 from itab1. Can someone help.
Thanks. I am on 4.7 and will upgrade to ERP 6.0 soon.

go throgh this....
REPORT yusmm_text1 NO STANDARD PAGE HEADING
 LINE-SIZE 199.
T A B L E S
TABLES: MARA,
 MAKT,
 THEAD.
GLOBAL TYPE-POOLS
TYPE-POOLS : SLIS.
 GLOBAL TYPES
TYPES : BEGIN OF TP_FINAL,
 MATNR TYPE MARA-MATNR,
 BEGRU TYPE MARA-BEGRU,
 MTART TYPE MARA-MTART,
 MAKTX TYPE MAKT-MAKTX,
 SPRAS TYPE MAKT-SPRAS,
 LTXT(2000) TYPE C ,
 SRNO TYPE N ,
 END OF TP_FINAL.
TYPES : BEGIN OF TP_T002,
 SPRAS TYPE T002-SPRAS,
 LAISO TYPE T002-LAISO,
 SRNO TYPE N ,
 END OF TP_T002.
TYPES : BEGIN OF TP_MARA_MAKT,
 MATNR TYPE MARA-MATNR,
 BEGRU TYPE MARA-BEGRU,
 MTART TYPE MARA-MTART,
 SPRAS TYPE MAKT-SPRAS,
 MAKTX TYPE MAKT-MAKTX,
 END OF TP_MARA_MAKT.
Types: BEGIN OF tp_matnr,
 matnr TYPE mara-matnr,
 END OF tp_matnr.
 GLOBAL ELEMENTARY VARIABLES
DATA : gv_date TYPE sy-datum.
DATA : gv_repid TYPE sy-repid.
DATA : g_var1(10) TYPE C.
DATA : gv_index TYPE sy-tabix.
DATA: gv_strg TYPE string,
 gv_strg1(2000) TYPE C.
DATA : gv_lang TYPE sy-langu.
DATA : g_v(3) TYPE N .
DATA : gv_lines(3) TYPE N .
DATA : gv_var(3) TYPE N .
DATA : gv_var1(3) TYPE N.
DATA: gv_str TYPE STRING.
DATA: gv_str1 TYPE STRING.
DATA : gv_li TYPE I,
 gv_lit TYPE I,
 gv_lin TYPE I.
DATA: g_var11(3) TYPE N,
 gv_li1(3) TYPE N,
 g_var2(3) TYPE N.
DATA : gv_i1 TYPE I.
DATA : gv_i TYPE I.
DATA: gl_lenght TYPE I.
 GLOBAL STRUCTURES
DATA: T_NEWTABLE TYPE REF TO DATA,
 T_NEWLINE TYPE REF TO DATA,
 T_FLDCAT1 TYPE SLIS_T_FIELDCAT_ALV,
 T_FLDCAT TYPE LVC_T_FCAT,
 WA_IT_FLDCAT TYPE LVC_S_FCAT,
 WA_IT_FLDCAT1 TYPE SLIS_FIELDCAT_ALV,
 WA_COLNO(2) TYPE N,
 WA_FLNAME(5) TYPE C,
 L_LT TYPE SLIS_LAYOUT_ALV.
 GLOBAL INTERNAL TABLES (WITH INCLUDE STRUCTURE)
DATA : IG_MARA_MAKT TYPE STANDARD TABLE OF TP_MARA_MAKT,
 WG_MARA_MAKT TYPE TP_MARA_MAKT.
DATA : IG_T002 TYPE STANDARD TABLE OF TP_T002,
 WG_T002 TYPE TP_T002.
DATA : IG_FINAL TYPE STANDARD TABLE OF TP_FINAL,
 WG_FINAL TYPE TP_FINAL.
data : IG_MATNR TYPE STANDARD TABLE OF TP_MATNR WITH HEADER LINE,
 WG_MATNR TYPE TP_MATNR.
DATA:BEGIN OF IG_THEAD OCCURS 0.
 INCLUDE STRUCTURE THEAD .
DATA: END OF IG_THEAD.
DATA:BEGIN OF IG_TLINE OCCURS 0.
 INCLUDE STRUCTURE TLINE .
DATA:END OF IG_TLINE.
FIELD-SYMBOLS
FIELD-SYMBOLS: <T_DYNTABLE> TYPE STANDARD TABLE,"Dynamic internal
 "tablename
 <FS_DYNTABLE>, "Field symbol to create work area
 <FS_FLDVAL> TYPE ANY. " Field symbol to assign values
COMPULSORY
FIELD-SYMBOLS: <FS_DATA> TYPE REF TO DATA,
 <FS_DATA1> TYPE REF TO DATA,
 <FS_2> TYPE STANDARD TABLE,
 <FS_22> TYPE STANDARD TABLE,
 <FS_1>,
 <FS_11>,
 <F>,
 <FA>,
 <LWA_LINE_WA>,
 <LWA_LINE_WA1>.
------- Create Dyn Table From FC
DATA: LT_DATA TYPE REF TO DATA,
 LT_DATA1 TYPE REF TO DATA,
 LWA_LINE TYPE REF TO DATA,
 LWA_LINE1 TYPE REF TO DATA,
 LI_FIELD_CAT TYPE LVC_T_FCAT,
 LWA_FIELD_CAT TYPE LVC_S_FCAT.
 PARAMETERS & SELECT-OPTIONS
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_SPRAS FOR MAKT-SPRAS NO INTERVALS DEFAULT 'EN'
 OBLIGATORY ,
 S_MATNR FOR MARA-MATNR,
 S_MTART FOR MARA-MTART.
PARAMETERS: GP_SIZE TYPE I DEFAULT '200'.
SELECTION-SCREEN : END OF BLOCK B1.
 INITIALIZATION
INITIALIZATION.
gv_repid = sy-repid.
gv_date = sy-datum.
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
IF GP_SIZE < 0.
 MESSAGE E002(00).
ENDIF.
IF GP_SIZE > 50000.
 MESSAGE W130(26) WITH TEXT-004.
 SET CURSOR FIELD 'gp_size'.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM DATA_FETCH.
PERFORM READ_DATA_TO_FINAL.
SORT ig_final BY matnr spras.
gv_lin = gv_li.
gv_li = gv_li - 2.
LOOP AT ig_final INTO wg_final.
 ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = 'Material Number'.
 ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = 'Authorization Group'.
 g_VAR11 = wg_final-srno + 2.
 gv_li1 = gv_li1 + 2.
 MOVE : g_var11 TO gv_i1.
 ASSIGN COMPONENT g_var11 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = 'MatDesc'.
 g_var2 = g_var11 + gv_lines.
 ASSIGN COMPONENT g_var2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = 'BasicData'.
 APPEND <LWA_LINE_WA1> TO <FS_22>.
 EXIT.
 ENDLOOP.
LOOP AT ig_final INTO wg_final.
 AT NEW matnr.
 gv_index = sy-tabix.
 ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = wg_final-matnr.
 ENDAT.
 AT NEW MATNR.
 GV_INDEX = SY-TABIX.
 ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = wg_final-matnr.
 ENDAT.
 ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = wg_final-begru.
 ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = wg_final-begru.
 gv_var = wg_final-srno + 2.
 gv_li = gv_li + 2.
 MOVE : gv_var TO gv_i.
 ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = wg_final-maktx.
 ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = wg_final-maktx.
 gv_var1 = gv_var + gv_lines .
 ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = wg_final-ltxt.
 ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = wg_final-ltxt.
 AT END OF matnr.
 APPEND <LWA_LINE_WA> TO <FS_2>.
 CLEAR <LWA_LINE_WA>.
 ENDAT.
 AT END OF matnr.
 APPEND <LWA_LINE_WA1> TO <FS_22>.
 CLEAR <LWA_LINE_WA1>.
 ENDAT.
ENDLOOP.
PERFORM display..
*& Form data_fetch
 text
--> p1 text
<-- p2 text
FORM DATA_FETCH .
SELECT matnr
 from mara up to gp_size rows
 appending corresponding fields of table ig_matnr
 where matnr in s_matnr
 and mtart in s_mtart.
loop at ig_matnr.
SELECT MARA~MATNR
 MARA~BEGRU
 MARA~MTART
 MAKT~SPRAS
 MAKT~MAKTX FROM MARA INNER JOIN MAKT
 ON MARAMATNR = MAKTMATNR
 appending corresponding fields of TABLE ig_mara_makt UP TO GP_SIZE
ROWS
 WHERE makt~spras IN s_spras
 AND mara~matnr IN s_matnr
 AND mara~mtart IN s_mtart
 AND mara~matnr EQ ig_matnr-matnr.
 endloop.
IF sy-subrc = 0.
 SORT ig_mara_makt.
ENDIF.
ENDFORM. " data_fetch
*& Form read_data_to_final
 text
--> p1 text
<-- p2 text
FORM READ_DATA_TO_FINAL .
LOOP AT ig_mara_makt INTO wg_mara_makt .
 wg_final-MATNR = wg_mara_makt-MATNR.
 wg_final-BEGRU = wg_mara_makt-BEGRU.
 wg_final-MTART = wg_mara_makt-MTART.
 wg_final-SPRAS = wg_mara_makt-SPRAS.
 wg_final-MAKTX = wg_mara_makt-MAKTX.
 READ TABLE ig_t002 INTO wg_t002 WITH KEY spras = wg_final-spras.
 IF sy-subrc = 0.
 wg_final-srno = wg_t002-srno.
 ENDIF.
 CLEAR ig_thead[].
 ig_thead-TDOBJECT = 'MATERIAL'.
 ig_thead-TDNAME = wg_final-matnr.
 ig_thead-TDID = 'GRUN'.
 ig_thead-TDSPRAS = wg_final-spras.
 CALL FUNCTION 'TEXT_READ'
 EXPORTING
 I_HEADER = IG_THEAD
 I_READONLY = 'X'
 IMPORTING
 E_HEADER = IG_THEAD
 TABLES
 T_LINES = IG_TLINE[]
 EXCEPTIONS
 NOTFOUND = 1.
 IF sy-subrc EQ 0.
 LOOP AT ig_tline.
 gv_strg = ig_tline-tdline.
 IF gv_strg1 <> ' '.
 CONCATENATE gv_strg1 ';' gv_strg INTO gv_strg1.
 ELSE.
 gv_strg1 = gv_strg.
 ENDIF.
 ENDLOOP.
 wg_final-ltxt = gv_strg1.
 APPEND wg_final TO ig_final.
 CLEAR wg_final.
 gv_strg1 = ' '.
 ELSE.
 APPEND wg_final TO ig_final.
 ENDIF.
ENDLOOP.
ENDFORM. " read_data_to_final
" read_data_to_final
*& Form layout
 text
--> p1 text
<-- p2 text
FORM LAYOUT .
CLEAR L_LT.
L_LT-ZEBRA = 'X'.
L_LT-COLWIDTH_OPTIMIZE = 'X'.
L_LT-WINDOW_TITLEBAR = 'MATERIAL DETAILS'.
ENDFORM. " layout
*& Form fieldcat
 text
--> p1 text
<-- p2 text
FORM FIELDCAT .
SELECT SPRAS
 LAISO FROM t002 INTO CORRESPONDING FIELDS OF TABLE ig_t002
 WHERE spras IN s_spras.
DESCRIBE TABLE ig_t002 LINES gv_lines.
LOOP AT ig_t002 INTO wg_t002.
 g_v = g_v + 1.
 Wg_t002-srno = g_v.
 MODIFY ig_t002 FROM wg_t002 TRANSPORTING SRNO.
ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
 CLEAR WA_IT_FLDCAT.
 MOVE SY-INDEX TO WA_COLNO.
 CONCATENATE 'MD-' wg_t002-LAISO
 WA_COLNO
 INTO WA_FLNAME.
 WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
 WA_IT_FLDCAT-DATATYPE = 'CHAR'.
 WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
 WA_IT_FLDCAT-INTLEN = 250.
 WA_IT_FLDCAT-TABNAME = '<FS_2>'.
 APPEND WA_IT_FLDCAT TO T_FLDCAT.
 CLEAR wg_t002.
 ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
 CLEAR WA_IT_FLDCAT.
 MOVE SY-INDEX TO WA_COLNO.
 CONCATENATE 'BD-' wg_t002-LAISO
 WA_COLNO
 INTO WA_FLNAME.
 WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
 WA_IT_FLDCAT-DATATYPE = 'CHAR'.
 WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
 WA_IT_FLDCAT-INTLEN = 250.
 WA_IT_FLDCAT-TABNAME = '<FS_2>'.
 APPEND WA_IT_FLDCAT TO T_FLDCAT.
 CLEAR wg_t002.
 ENDLOOP.
MOVE 'MATNR' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Material No'.
WA_IT_FLDCAT-INTLEN = 18.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 1.
MOVE 'BEGRU' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Authorization Group'.
WA_IT_FLDCAT-INTLEN = 4.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 2.
DESCRIBE TABLE T_FLDCAT LINES gv_li.
ASSIGN LT_DATA TO <FS_DATA>.
Creating the Dynamic Internal Table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
 EXPORTING
 IT_FIELDCATALOG = T_FLDCAT " Fieldcatalogue
 IMPORTING
 EP_TABLE = <FS_DATA> " Dynamic Internal Table
 EXCEPTIONS
 GENERATE_SUBPOOL_DIR_FULL = 1
 OTHERS = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA>->* TO <FS_1>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_1> TO <FS_2>.
Creating a Workarea
CREATE DATA LWA_LINE LIKE LINE OF <FS_2> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE->* TO <LWA_LINE_WA>.
LOOP AT T_FLDCAT INTO WA_IT_FLDCAT.
 WA_IT_FLDCAT1-FIELDNAME = WA_IT_FLDCAT-FIELDNAME.
 WA_IT_FLDCAT1-TABNAME = WA_IT_FLDCAT-TABNAME.
 WA_IT_FLDCAT1-SELTEXT_L = WA_IT_FLDCAT-SELTEXT.
 WA_IT_FLDCAT1-REF_TABNAME = 'MARC'.
 APPEND WA_IT_FLDCAT1 TO T_FLDCAT1.
 CLEAR : WA_IT_FLDCAT,WA_IT_FLDCAT1.
ENDLOOP.
ASSIGN LT_DATA1 TO <FS_DATA1>.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
 EXPORTING
 IT_FIELDCATALOG = T_FLDCAT " Fieldcatalogue
 IMPORTING
 EP_TABLE = <FS_DATA1> " Dynamic Internal table
 EXCEPTIONS
 GENERATE_SUBPOOL_DIR_FULL = 1
 OTHERS = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA1>->* TO <FS_11>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_11> TO <FS_22>.
Creating a Workarea
CREATE DATA LWA_LINE1 LIKE LINE OF <FS_22> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE1->* TO <LWA_LINE_WA1>.
ENDFORM. " fieldcat
*& Form show
 text
--> p1 text
<-- p2 text
FORM Display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_INTERFACE_CHECK = ' '
 I_BYPASSING_BUFFER = ' '
 I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = GV_REPID
 I_CALLBACK_PF_STATUS_SET = 'PF_STATUS_SET'
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
 I_CALLBACK_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_END_OF_LIST = ' '
 I_STRUCTURE_NAME =
 I_BACKGROUND_ID = ' '
 I_GRID_TITLE =
 I_GRID_SETTINGS =
 IS_LAYOUT = L_LT
 IT_FIELDCAT = T_FLDCAT1[]
 IT_EXCLUDING =
 IT_SPECIAL_GROUPS =
 IT_SORT =
 IT_FILTER =
 IS_SEL_HIDE =
 I_DEFAULT = 'X'
 I_SAVE = ' '
 IS_VARIANT =
 IT_EVENTS =
 IT_EVENT_EXIT =
 IS_PRINT =
 IS_REPREP_ID =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 I_HTML_HEIGHT_TOP = 0
 I_HTML_HEIGHT_END = 0
 IT_ALV_GRAPHICS =
 IT_HYPERLINK =
 IT_ADD_FIELDCAT =
 IT_EXCEPT_QINFO =
 IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
 E_EXIT_CAUSED_BY_CALLER =
 ES_EXIT_CAUSED_BY_USER =
 TABLES
 T_OUTTAB = <FS_2>
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display
FORM PF_STATUS_SET USING RS_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'DISPLAY' .
ENDFORM. "PF_STATUS_SET
*& Form Name: user_command *
*& Form Desc: For Handling USER_COMMAND *
FORM USER_COMMAND USING IF_UCOMM TYPE SY-UCOMM
 IS_SELFIELD TYPE SLIS_SELFIELD.
CASE IF_UCOMM.
 WHEN 'DOWNLOAD'.
 CALL FUNCTION 'POPUP_TO_CONFIRM'
 EXPORTING
TITLEBAR = ' '
DIAGNOSE_OBJECT = ' '
 TEXT_QUESTION = 'Data download to excel'
TEXT_BUTTON_1 = 'Ja'(001)
ICON_BUTTON_1 = ' '
TEXT_BUTTON_2 = 'Nein'(002)
ICON_BUTTON_2 = ' '
DEFAULT_BUTTON = '1'
DISPLAY_CANCEL_BUTTON = 'X'
USERDEFINED_F1_HELP = ' '
START_COLUMN = 25
START_ROW = 6
POPUP_TYPE =
IMPORTING
ANSWER =
TABLES
PARAMETER =
EXCEPTIONS
TEXT_NOT_FOUND = 1
OTHERS = 2
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 BIN_FILESIZE =
 FILENAME = 'C:\Material-Text.xls'
 FILETYPE = 'ASC'
 APPEND = ' '
 WRITE_FIELD_SEPARATOR = 'X'
 HEADER = '00'
 TRUNC_TRAILING_BLANKS = 'X'
 WRITE_LF = 'X'
 COL_SELECT = ' '
 COL_SELECT_MASK = ' '
 DAT_MODE = 'X'
 IMPORTING
 FILELENGTH = GL_LENGHT
 TABLES
 DATA_TAB = <FS_22>
EXCEPTIONS
 FILE_WRITE_ERROR = 1
 NO_BATCH = 2
 GUI_REFUSE_FILETRANSFER = 3
 INVALID_TYPE = 4
 NO_AUTHORITY = 5
 UNKNOWN_ERROR = 6
 HEADER_NOT_ALLOWED = 7
 SEPARATOR_NOT_ALLOWED = 8
 FILESIZE_NOT_ALLOWED = 9
 HEADER_TOO_LONG = 10
 DP_ERROR_CREATE = 11
 DP_ERROR_SEND = 12
 DP_ERROR_WRITE = 13
 UNKNOWN_DP_ERROR = 14
 ACCESS_DENIED = 15
 DP_OUT_OF_MEMORY = 16
 DISK_FULL = 17
 DP_TIMEOUT = 18
 FILE_NOT_FOUND = 19
 DATAPROVIDER_EXCEPTION = 20
 CONTROL_FLUSH_ERROR = 21
 OTHERS = 22
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 IF GL_LENGHT NE 0.
 MESSAGE S398(00) WITH 'DATA downloaded to EXCEL'.
 ENDIF.
ENDCASE.
ENDFORM. "user_command
Thanks

How to paas internal table value

how to pass internal table first value to a variable plz help me

Hi dulla anjan prasad
   You can use the LOOP statement to process special loops for any internal table.
LOOP AT itab result condition.
statement block
ENDLOOP.
This reads the lines of the table one by one as specified in the result part of the LOOP statement. You can then process them in the statements within the LOOP - ENDLOOP control structure. You can either run the loop for all entries in the internal table, or restrict the number of lines read by specifying a condition. Control level processing is allowed within the loop.
The sequence in which the lines are processed depends on the table type:
·        Standard tables and sorted tables
The lines are processed according to the linear index. Within the processing block, the system field sy-tabix contains the index of the current line.
·        Hashed tables
As long as the table has not been sorted, the lines are processed in the order in which you added them to the table. Within the processing block, the system field sy-tabix is always 0.
You can nest LOOP blocks. When you leave the loop, sy-tabix has the same value as when you entered it. After the ENDLOOP statement, sy-subrc is zero if at least one table entry was processed. Otherwise, it is 4.
The loop may not contain any operations on entire internal tables that change the table. However, you should remember that even saving a global internal table with the LOCAL statement in a procedure is a change operation on the entire table, since it exchanges the table contents. When you call procedures within loops, you should therefore check that it does not change the entire internal table. If you change the table, the loop can no longer work properly.
If you insert or delete a table entry within a loop pass, it is taken into account in subsequent loop passes as follows:
·        If you insert a line after the current line, it will be processed in a subsequent loop pass.
·        If you delete a line after the current line, it will not be processed in a subsequent loop pass.
·        If you insert a line before or at the current line, the internal loop counter will be increased accordingly.
·        If you delete a line before or at the current line, the internal loop counter will be decreased accordingly.
If this information is usefull plz do reward points....
Message was edited by:
        ARUN

How to Send Internal table to SAP Spool using Function Modules or Methods?

Hi Experts,
How to Send Internal table to SAP Spool using Function Modules or Methods?
Thanks ,
Kiran

This is my code.
I still get the no ABAP list data for the spool, even tho I can see it sp01?
REPORT Z_MAIL_PAYSLIP.
* Declaration Part *
tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
infotypes: 0000, 0001, 0105, 0655.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
 W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
 P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
 MY_MONTH type T549Q-PABRP,
 STR_MY_MONTH(2) type C,
 MY_YEAR type T549Q-PABRJ,
 STR_MY_YEAR(4) type C,
 CRLF(2) type x value '0D0A'.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
 ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
 INDEX type I,
end of P_INDEX.
constants: begin of F__LTYPE, "type of line
 CMD like PC408-LTYPE value '/:', "command
 TXT like PC408-LTYPE value 's', "textline
end of F__LTYPE.
constants: begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
*data: OBJBIN like SOLISTI1 occurs 10 with header line,
data: OBJBIN like LVC_S_1022 occurs 10 with header line,
 DOCDATA like SODOCCHGI1,
 OBJTXT like SOLISTI1 occurs 10 with header line,
 OBJPACK like SOPCKLSTI1 occurs 1 with header line,
 RECLIST like SOMLRECI1 occurs 1 with header line,
 OBJHEAD like SOLISTI1 occurs 1 with header line,
 it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 gd_buffer type string,
 l_no_of_bytes TYPE i,
 l_pdf_spoolid LIKE tsp01-rqident,
 l_jobname LIKE tbtcjob-jobname.
data: file_length type int4,
 spool_id type rspoid,
 line_cnt type i.
*-------------------------------------------------------------------* * INITIALIZATION *
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
data: S_ABKRS like PV000-ABKRS.
data: S_PABRP like T549Q-PABRP.
data: S_PABRJ like T549Q-PABRJ.
* SELECTION SCREEN *
selection-screen begin of block BL1.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
START-OF-SELECTION.
s_ABKRS = PNPXABKR.
S_PABRP = PNPPABRP.
s_pabrj = PNPPABRJ.
w_begda = PN-BEGDA.
w_endda = PN-ENDDA.
get pernr.
* "Check active employees
rp-provide-from-last p0000 space pn-begda pn-endda.
CHECK P0000-STAT2 IN PNPSTAT2.
* "Check Payslip Mail flag
rp-provide-from-last p0655 space pn-begda pn-endda.
CHECK P0655-ESSONLY = 'X'.
rp-provide-from-last p0001 space pn-begda pn-endda.
* "Find email address
RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
if p0105-usrid_LONG ne ''.
 ITAB-PERNR = P0001-PERNR.
 ITAB-ABKRS = P0001-ABKRS.
 ITAB-ENAME = P0001-ENAME.
 ITAB-USRID_LONG = P0105-USRID_LONG.
 append itab.
 clear itab.
endif.
"SY-UCOMM ='ONLI'
END-OF-SELECTION.
*------------------------------------------------------------------* start-of-selection.
write : / 'Payroll Area : ', S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
write : / 'System Time : ', SY-UZEIT.
write : / 'User Name : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
 clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
 refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
* Retrieve Payroll results sequence number for this run
 select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
 and FPBEG ge W_BEGDA
 and FPEND le W_ENDDA
 and SRTZA eq 'A'.
* Produce payslip for those payroll results
 if SY-SUBRC = 0.
 call function 'GET_PAYSLIP'
 EXPORTING
 EMPLOYEE_NUMBER = ITAB-PERNR
 SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
 PAYSLIP_VARIANT = PAY_VAR
 IMPORTING
 RETURN = RETURN
 P_INFO = P_INFO
 TABLES
 P_FORM = P_FORM.
 check RETURN is initial.
* remove linetype from generated payslip
 loop at p_form.
 objbin = p_form-linda.
 append objbin.
 line_cnt = line_cnt + 1.
 endloop.
 file_length = line_cnt * 1022.
* create spool file of paylsip
 CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
 EXPORTING
 i_file_length = file_length
 IMPORTING
 e_spoolid = spool_id
 TABLES
 it_textdata = objbin.
 IF sy-subrc EQ 0.
 WRITE spool_id.
 ENDIF.
 DESCRIBE table objbin.
 DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
 CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
 EXPORTING
 SRC_SPOOLID = spool_id
 NO_DIALOG = ' '
 DST_DEVICE = 'MAIL'
* PDF_DESTINATION =
* IMPORTING
* PDF_BYTECOUNT = l_no_of_bytes
* PDF_SPOOLID = l_pdf_spoolid
* LIST_PAGECOUNT =
* BTC_JOBNAME =
* BTC_JOBCOUNT =
 TABLES
 PDF = pdf
 EXCEPTIONS
 ERR_NO_ABAP_SPOOLJOB = 1
 ERR_NO_SPOOLJOB = 2
 ERR_NO_PERMISSION = 3
 ERR_CONV_NOT_POSSIBLE = 4
 ERR_BAD_DESTDEVICE = 5
 USER_CANCELLED = 6
 ERR_SPOOLERROR = 7
 ERR_TEMSEERROR = 8
 ERR_BTCJOB_OPEN_FAILED = 9
 ERR_BTCJOB_SUBMIT_FAILED = 10
 ERR_BTCJOB_CLOSE_FAILED = 11
 OTHERS = 12
 IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
*Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 filename = 'C:\itab_to_pdf.pdf'
 filetype = 'BIN'
 TABLES
 data_tab = pdf.
* Transfer the 132-long strings to 255-long strings
* LOOP AT pdf.
* TRANSLATE pdf USING ' ~'.
* CONCATENATE gd_buffer pdf INTO gd_buffer.
* ENDLOOP.
* TRANSLATE gd_buffer USING '~ '.
* DO.
* it_mess_att = gd_buffer.
* APPEND it_mess_att.
* SHIFT gd_buffer LEFT BY 255 PLACES.
* IF gd_buffer IS INITIAL.
* EXIT.
* ENDIF.
* ENDDO.
 OBJHEAD = 'Objhead'.
 append OBJHEAD.
* preparing email subject
 concatenate W_ENDDA(6)
 ' Payslip-'
 ITAB-ENAME+0(28)
 ITAB-PERNR+4(4) ')'
 into DOCDATA-OBJ_DESCR.
 DOCDATA-OBJ_NAME = 'Pay Slip'.
 DOCDATA-OBJ_LANGU = SY-LANGU.
 OBJTXT = 'Pay Slip.'.
 append OBJTXT.
*prepare email lines
 OBJTXT = DOCDATA-OBJ_DESCR.
 append OBJTXT.
 OBJTXT = 'Please find enclosed your current payslip.'.
 append OBJTXT.
* Write Attachment(Main)
* 3 has been fixed because OBJTXT has fix three lines
 read table OBJTXT index 3.
* DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
 clear OBJPACK-TRANSF_BIN.
 OBJPACK-HEAD_START = 1.
 OBJPACK-HEAD_NUM = 0.
 OBJPACK-BODY_START = 1.
 OBJPACK-BODY_NUM = 3.
 OBJPACK-DOC_TYPE = 'RAW'.
 append OBJPACK.
* Create Message Attachment
 ATT_TYPE = 'PDF'.
 describe table OBJBIN lines TAB_LINES.
 read table OBJBIN index TAB_LINES.
* OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
 OBJPACK-TRANSF_BIN = 'X'.
 OBJPACK-HEAD_START = 1.
 OBJPACK-HEAD_NUM = 0.
 OBJPACK-BODY_START = 1.
 OBJPACK-BODY_NUM = TAB_LINES.
 OBJPACK-DOC_TYPE = ATT_TYPE.
 OBJPACK-OBJ_NAME = 'ATTACHMENT'.
 OBJPACK-OBJ_DESCR = 'Payslip'.
 append OBJPACK.
* Create receiver list refresh RECLIST.
 clear RECLIST.
 RECLIST-RECEIVER = itab-USRID_long.
 translate RECLIST-RECEIVER to lower case.
 RECLIST-REC_TYPE = 'U'.
 append RECLIST.
* Send the document
*SO_NEW_DOCUMENT_ATT_SEND_API1
 call function 'SO_DOCUMENT_SEND_API1'
 exporting
 DOCUMENT_DATA = DOCDATA
 PUT_IN_OUTBOX = 'X'
 COMMIT_WORK = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
 tables
 PACKING_LIST = OBJPACK
 OBJECT_HEADER = OBJHEAD
 CONTENTS_BIN = pdf
 CONTENTS_TXT = OBJTXT
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
 RECEIVERS = RECLIST
 exceptions
 TOO_MANY_RECEIVERS = 1
 DOCUMENT_NOT_SENT = 2
 DOCUMENT_TYPE_NOT_EXIST = 3
 OPERATION_NO_AUTHORIZATION = 4
 PARAMETER_ERROR = 5
 X_ERROR = 6
 ENQUEUE_ERROR = 7
 others = 8.
 if SY-SUBRC NE 0.
 ITAB-MTEXT = 'Message Not Sent to : '.
 else.
 ITAB-MTEXT = 'Message Sent to : '.
 endif.
* else.
* ITAB-MTEXT = 'Message Not Sent to : '.
* endif.
 else.
 "SY-SUBRC Not = 0
 ITAB-MTEXT = 'Payroll data not found : '.
 endif.
 "end of SY-SUBRC = 0.
 modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
 at new MTEXT.
 uline.
 write : / ITAB-MTEXT color 4 intensified on.
 write : / 'Emp. Code' color 2 intensified on,
 12 'Emp. Name' color 2 intensified on,
 54 'Email ID' color 2 intensified on.
 endat.
 write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop.

How to pass internal table to form routine..?

Gurus,
I am creating a custom Function module in which i have declared few perform statements and passing internal table to it..but when i declare the form it gives me error that the internal table is unknown...Can u please suggest me what am i doing wrong...
DATA: Begin of tb_set_values occurs 0.
 include structure rgsb4.
DATA: End of tb_set_values.
PERFORM read_sets_with_values USING wa_setheader CHANGING tb_set_values[].
FORM read_sets_with_values USING value(rwa_setheader) LIKE setheader
 CHANGING rtb_set_values LIKE tb_set_values[].
DATA: v_setid TYPE setid.
*DATA: Begin of rtb_set_values occurs 0.
 include structure rgsb4.
*DATA: End of rtb_set_values.
CALL FUNCTION 'G_SET_GET_ID_FROM_NAME'
 EXPORTING
 SHORTNAME = rwa_setheader-setname
 IMPORTING
 NEW_SETID = v_setid.
CALL FUNCTION 'G_SET_GET_ALL_VALUES'
 EXPORTING
 SETNR = v_setid
 TABLES
 SET_VALUES = rtb_set_values.
ENDFORM.
What can be the error..please help

Well actually, I just tested it and it works fine as you have written it in my test program, so not sure what you are doing wrong. This was tested in NW 7.0
REPORT rich_0001.
DATA: setheader TYPE string.
DATA: wa_setheader TYPE string.
DATA: BEGIN OF tb_set_values OCCURS 0.
 INCLUDE STRUCTURE t000. "<<-- Test with T000 instead "rgsb4.
DATA: END OF tb_set_values.
SELECT * INTO TABLE tb_set_values FROM t000.
PERFORM read_sets_with_values USING wa_setheader
 CHANGING tb_set_values[].
*& Form read_sets_with_values
* text
* -->VALUE(RWA_SETHEADER) text
* -->RTB_SET_VALUES text
FORM read_sets_with_values USING value(rwa_setheader) LIKE setheader
 CHANGING rtb_set_values LIKE tb_set_values[].
DATA: ls_set_values LIKE LINE OF rtb_set_values.
LOOP AT rtb_set_values INTO ls_set_values.
 WRITE:/ ls_set_values.
ENDLOOP.
ENDFORM. "read_sets_with_values
Regards,
RIch Heilman

How to Convert internal table data into text output and send mail in ABAP

Hi All,
Good Morning.
Taking a glance at a code that converts internal table data to an Excel file in ABAP. also checked how to send this excel to mailing list as attachment.
But thought of doing it without excel.
I mean, I have an internal table which contains fields of all types (character,integer,date,time). Since it is only around 4 to 5 rows in it (output),why to convert it to excel. not required!!. Instead I want to send this output to User's mails as Normal mail body with No attachments.
Could anybody please suggest me a way as to how to send internal table data as a mail ( not as an excel or PDF etc).
as of now my findings are, it is quite complex to convert internal table data to email (Text) format. but i believe if there is some way of doing it.
Best Regards
Dileep VT

here's something I have used in the past where we send out information about failed precalculation settings (which are stored in internal table gt_fail)
notice we use gt_text as "mail body"
TRY.
* -------- create persistent send request ------------------------
 gv_send_request = cl_bcs=>create_persistent( ).
* -------- create and set document -------------------------------
* create text to be sent
 wa_line = text-001.
 APPEND wa_line TO gt_text.
 CLEAR wa_line.
 APPEND wa_line TO gt_text.
 LOOP AT gt_fail ASSIGNING <fs_fail>.
 MOVE <fs_fail>-retry_count TO gv_count.
 CONCATENATE text-002
 <fs_fail>-setting_id
 text-003
 gv_count
 INTO wa_line SEPARATED BY space.
 APPEND wa_line TO gt_text.
 CLEAR wa_line.
 ENDLOOP.
 APPEND wa_line TO gt_text.
 wa_line = text-007.
 APPEND wa_line TO gt_text.
* create actual document
 gv_document = cl_document_bcs=>create_document(
 i_type = 'RAW'
 i_text = gt_text
 i_length = '12'
 i_subject = 'Failed Precalculation Settings!' ).
* add document to send request
 CALL METHOD gv_send_request->set_document( gv_document ).
* --------- set sender -------------------------------------------
 gv_sender = cl_sapuser_bcs=>create( sy-uname ).
 CALL METHOD gv_send_request->set_sender
 EXPORTING
 i_sender = gv_sender.
* --------- add recipient (e-mail address) -----------------------
 LOOP AT s_email INTO wa_email.
 MOVE wa_email-low TO gv_email.
 gv_recipient = cl_cam_address_bcs=>create_internet_address(
 gv_email ).
 CALL METHOD gv_send_request->add_recipient
 EXPORTING
 i_recipient = gv_recipient
 i_express = 'X'.
 ENDLOOP.
* ---------- set to send immediately -----------------------------
 CALL METHOD gv_send_request->set_send_immediately( 'X' ).
* ---------- send document ---------------------------------------
 CALL METHOD gv_send_request->send(
 EXPORTING
 i_with_error_screen = 'X'
 RECEIVING
 result = gv_sent_to_all ).
 IF gv_sent_to_all = 'X'.
 WRITE text-004.
 ENDIF.
 COMMIT WORK.
* exception handling
 CATCH cx_bcs INTO gv_bcs_exception.
 WRITE: text-005.
 WRITE: text-006, gv_bcs_exception->error_type.
 EXIT.
 ENDTRY.
with the following declarations
* TABLES *
TABLES:
 adr6,
 rsr_prec_sett.
* INTERNAL TABLES & WORK AREAS *
DATA:
 gt_fail TYPE SORTED TABLE OF rsr_prec_sett
 WITH UNIQUE KEY setting_id run_date,
 gt_text TYPE bcsy_text,
 wa_fail LIKE LINE OF gt_fail,
 wa_line(90) TYPE c.
FIELD-SYMBOLS:
 <fs_fail> LIKE LINE OF gt_fail.
* VARIABLES *
DATA:
 gv_count(4) TYPE n,
 gv_send_request TYPE REF TO cl_bcs,
 gv_document TYPE REF TO cl_document_bcs,
 gv_sender TYPE REF TO cl_sapuser_bcs,
 gv_recipient TYPE REF TO if_recipient_bcs,
 gv_email TYPE adr6-smtp_addr,
 gv_bcs_exception TYPE REF TO cx_bcs,
 gv_sent_to_all TYPE os_boolean.
* SELECTION-SCREEN *
SELECT-OPTIONS:
 s_email FOR adr6-smtp_addr NO INTERVALS MODIF ID sel.
DATA:
 wa_email LIKE LINE OF s_email.

How to covvert internal table data to XML file?

Hi,
Do u have material on ABAP with XML?
and how to convert internal table to XML?
Thanks and Regards,
Arpita

Check below links:
XML DOM Processing in ABAP part II - Convert an XML file into an ABAP table using SAP DOM Approach.
Re: include a structure in a TYPES declaration
Thanks and Regards,

How to fill internal table dynamically

Hi All,
 how to fill internal table dynamically.
for example:
begin of itab occurs 0,
empid like pa0000-pernr,
empname like pa0001-ename,
grade(5),
end of itab.
now i want to append dynamically field itab-grade along with rest fields.
is this possible?? if yes kindly let me know how to do that.
Regards,
Kiran I

Hi kiran,
To fill and create and internal table dynamically you can use this code.
TYPE-POOLS: slis.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
 is_fcat LIKE LINE OF it_fcat.
DATA: it_fieldcat TYPE lvc_t_fcat,
 is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data.
DATA: new_line TYPE REF TO data.
FIELD-SYMBOLS: <l_table> TYPE ANY TABLE,
 <l_line> TYPE ANY,
 <l_field> TYPE ANY.
is_fieldcat-fieldname = 'FIELD1'.
is_fieldcat-ref_field = 'MATNR'.
is_fieldcat-ref_table = 'MARA'.
APPEND is_fieldcat TO it_fieldcat.
is_fieldcat-fieldname = 'FIELD2'.
is_fieldcat-ref_field = 'SPRPS'.
is_fieldcat-ref_table = 'PA0001'.
APPEND is_fieldcat TO it_fieldcat.
is_fieldcat-fieldname = 'FIELD3'.
is_fieldcat-ref_field = 'BEGDA'.
is_fieldcat-ref_table = 'PA0002'.
APPEND is_fieldcat TO it_fieldcat.
Create a new Table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
 it_fieldcatalog = it_fieldcat
IMPORTING
 ep_table = new_table.
Create a new Line with the same structure of the table.
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
Test it...
DO 40 times.
ASSIGN COMPONENT 'FIELD1' OF STRUCTURE <l_line> TO <l_field>.
<l_field> = '12345'.
ASSIGN COMPONENT 'FIELD2' OF STRUCTURE <l_line> TO <l_field>.
<l_field> = 'X'.
ASSIGN COMPONENT 'FIELD3' OF STRUCTURE <l_line> TO <l_field>.
<l_field> = '20030101'.
INSERT <l_line> INTO TABLE <l_table>.
ENDDO.
LOOP AT <l_table> ASSIGNING <l_line>.
ASSIGN COMPONENT 'field1' OF STRUCTURE <l_line> TO <l_field>.
WRITE / <l_line>.
ENDLOOP.
regards,
Aashish Garg

How to convert Internal Table to Cluster Table ?

How to convert Internal Table to Cluster Table ?

Use :
EXPORT itab TO DATABASE dbtab(ar) ID key.
EXPORT obj1 ... objn TO DATABASE dbtab(ar) ID key.
Additions:
1. ... = f (for each field you want to export)
2. ... FROM f (for each field you want to export)
3. ... CLIENT g before ID key )
4. ... USING form
5. ... FROM wa (as last addition or after dbtab(ar))
In an ABAP Objects context, a more severe syntax check is performed that in other ABAP areas. See Implicit field names not allowed with clusters and Table work areas not allowed.
Effect
Stores a data cluster in database table dbtab. The specified objects obj1 ... objn (fields, structures, or tables) are stored as a single cluster in the database table dbtab.
The specified database table dbtab must have a standard structure.
The database table dbtab is divided into various logically-related sections (ar, two-character name).
You can export a collection of data objects (a data cluster) to a part of the database using a key (field key).
You can import individual data objects from this collection using the IMPORT statement.
Notes
In classes, you must always assign explicit names to the data objects you want to export, that is, you must use either addition 1 or addition 2.
In classes, you must always specify the work area explicitly, that is, addition 5 is obligatory.
The table dbtab that appears after DATABAE must be declared under TABLES (except in addition 5).
You cannot export the header lines of internal tables. If you specify the name of an internal table with header line, the system always exports the body of the table.
You cannot export data, object, or interface references.
The data is stored in the database, and is consequently not actually stored until a database commit occurs (see LUW). Until this point, you can undo all of your changes using a database rollback (see Programming Transactions).
Example
Exporting two fields and an internal table to the database table INDX:
TABLES INDX.
TYPES: BEGIN OF ITAB3_TYPE,
 CONT(4),
 END OF ITAB3_TYPE.
DATA: INDXKEY LIKE INDX-SRTFD VALUE 'KEYVALUE',
 F1(4), F2 TYPE P,
 ITAB3 TYPE STANDARD TABLE OF ITAB3_TYPE WITH NON-UNIQUE
 DEFAULT KEY INITIAL SIZE 2,
 WA_INDX TYPE INDX.
Fill the data fields before CLUSTR
before the actual export
INDX-AEDAT = SY-DATUM.
INDX-USERA = SY-UNAME.
Export der Daten.
EXPORT F1 FROM F1
 F2 FROM F2
 ITAB3 FROM ITAB3
 TO DATABASE INDX(ST) FROM WA_INDX ID INDXKEY.

Regards

Pass the internal table with different structures to the class module

Hi ,
I have created a class method to fill up the data in XML format. the method can be called from various programs with internal table with different structures. I want to pass it as dynamic How can I do that.
I tried to declare that as type any.
but not working.
regards,
Madhuri

Hi,
You could work with data reference.
Use GET REFERENCE OF itab INTO data_ref for passing the internal table to your method, and dereference it within the method with ASSIGN statement...
DATA: lr_data TYPE REF TO data.
GET REFERENCE OF itab INTO lr_data.
CALL METHOD meth EXPORTING pr_data = lr_data.
METHOD meth.
FIELD-SYMBOLS <fs> TYPE ANY TABLE
ASSIGN pr_data->* TO <fs>.
ENDMETHOD.
Kr,
Manu.

How to sort internal tables of unknown structure?

Similar Messages

Maybe you are looking for