How to specify only possible owner of the VM in Hyper-v cluster (Windows 2012R2)

Good day,
We want to prevent the migration of
virtual machines between the cluster nodes in indows 2012R2 Hyper-V cluster.
How to specify only possible owner of the VM in Hyper-v cluster (Windows 2012R2) ?
SQL clustering

Hi Al_leont,
I ask if your using FOCM or SCVMM as you configure possible owners in different places. As well as possible owners you can also configure preferred owners, affinity and anti affinity groups and placement rules.
To configure possible owner in FOCM you select the VM you want to configure, then in the bottom window select the resources tab (change from summary tab). Right click the Virtual Machine Resource, then select the Advance Polices tab of
the popup window. You should then see the hyper-V nodes as Possible owners.
In SCVMM you just right click on the VM and select properties, then settings form the popup window.
Preferred owners, affinity and anti affinity groups, placement rules are configured in other locations or by PowerShell.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

How could it be possible to check the product number here to find that it is not factory reject?, How could it be possible to check the product number here to find that it is not factory reject?

How could it be possible to check the product number online to find that it is not factory rejection?
My product is Iphone 5 by the way.

<https://selfsolve.apple.com/agreementWarrantyDynamic.do>

How to fetch only WebI reports from the repository

How to fetch only WebI reports from the repository, where in we have Deski reports also in the repository.. any macro??

here is the query to fetch only webi reports:
Open Administration Launchpad (.Net / Java) from:
Start >> All Programs >> BusinessObjects XI Release 2 >> BusinessObjects Enterprise >
Click on the 'Query Builder' under 'Administration Tools' on the left pane.
Logon to Query Builder using Enterprise Administrator credentials.
Run the following query for Web Intelligence Reports:
SELECT SI_ID, SI_NAME, SI_OWNER FROM CI_INFOOBJECTS WHERE SI_KIND='WEBI'
Thanks,
Srikanth.

How to repaint only a portion of the Screen

We are developing Graphics based application where we need to call repaint method again and again. Now repaint method repaints the whole screen but we want it to repaint only a portion of the Screen. Is it possible ? if yes then how ?
Thanking You in Advance,
Ketan

repaint()
Repaints this component. This method causes a call to this component's update method as soon as possible.
repaint(int�x,y,width,height)
Repaints the specified rectangle of this component.
Noah

Not all of the host cluster nodes are marked as possible owners for the vms on this cluster

I get this message in a cluster's properties after having replaced nodes' hardware (but keeping the same names). I noticed that some of the VMs in their settings have all the nodes but one checked as Possible Owners.
What is a quick (PowerShell) way to find these VMs and check all the nodes as Possible Owners? I see this page (http://technet.microsoft.com/en-us/library/jj628161.aspx) as how
to do it in the GUI, but I want to do it with a script. I haven't yet found a VMM cmdlet that sets the Possible Owners of a VM.

Something like
Get-SCVirtualMachine | `
Where-Object{ ( $_.VirtualizationPlatform -eq "HyperV" ) -and $_.IsHighlyAvailable -and ( $_.ClusterNonPossibleOwner.count -gt 0 ) } `
| Foreach-object{ Set-SCVirtualMachine -VM $_ -ClusterNonPossibleOwner ( @() ) | Out-Null }
Gleb.

How to change only one attribute at the host

Hi experts,
we use host configuration with special host types. If we want to change only one attribute of the host with the cli we must change all attributes associates with the host. If we define only one new attribute all other values are set (back) to the default of the host type..
(in the gui all works fine...)
Is there a chance to change a only one attribute and keep all other attribute values of the host ?
Thanks,
Chris

No, it is not possible to do that.
All attributes (passed via -attr) are treated as a single argument to the host modification (similar to a name or description). Essentially, when you provide a -attr argument to hdb.h.mod, the command will reset the existing overridden attributes and consider only the new attributes coming thorugh the -attr arg for overriding.
You see it working from the UI properly because, the UI requests for overriding all atributes once again, even though you manually changed only one attribute.

How to specify a servlet mapping as the url pattern with in the security constraints

Hi ,
Weblogic 6.0 documentation says the following:-
Define which resources in the Web Application the security constraint applies to using the <url-pattern> element that is nested inside the <web-resource-collection> element. The <url-pattern> can refer to either a directory, filename or a <servlet-mapping>.
To apply the security constraint to the entire Web Application, use the following <url-pattern>:
<url-pattern>/*</url-pattern>
Could any one let me know how to specify servlet mapping as the url pattern.
I tried various combination and it doesn't seem to work and any help in this regard will be greatly appreciated.
Thanks
kannan

The answer is posted here:
Unapproved User Flag in UME

How do I only allow SPECIFIC webpages the ability to refresh or redirect?

Is there some way to have FIrefox only allow specific webpages the ability to reload or refresh a page? I already know of the
Tools -> Advanced -> Warn me when webpages attempt to refresh or reload the page
option. I am looking for the ability to only allow specific webpages, not ALL webpages.

Without additional information on the addon, as the documentation provided is sorely lacking, this addon doesn't help much.
Now if Firefox itself had a built-in whitelist / blacklist of pages allowed to redirect/refresh automatically, I'd be all for it.
Appreciate the thought cor-el, but it doesn't help.

How to delete only a portion of the data portal?

This would be similar to DataDelAll() command, but allow only a limited set of data to be removed.
For some background:
- DIAdem 9.1 sp2
- LabVIEW interface calling various DIAdem/VBS scripts
Using DIAdem to format reports based on various scripts and TDM data
results, I would like to be able to load and unload various data files
(TDM) while maintaining the specific report layout (also TDM) data in
the portal. Two (ugly) options seem to be:
a) load entire data result set into the portal (including layout instructions) and process, or
b) keep track of layout state variables and clear portal/reload layout/load next data
This would all be easy if there is a command to enable the right-click delete... behavior of the data portal UI.
Thanks!
James

Hello James,
there are diufferent commands you can use to delete only a portion of the data in the portal. You can delete single channels, a selection of channels, or entire groups with these three commands:
Call ChnDel(ChnArg) - deletes one channel
Call ChnDelete(ClpSource) - deletes a selection of channels
Call ChnSDel(ChnArg1, ChnNo) - delets a number of channels
Call GroupDel(TargetGroupIndex) - deletes a group including its channels
To create a selection of channels as argument for the second command, have a look at the functions
ChnSelAdd, ChnSelGet, ChnSelCount
Regards
Ingo Schumacher
Systems Engineer Sound&VibrationNational Instruments Germany

How to display only selected columns in the table on the tableview

Hi All,
I am displaying in the below tableview the data from the SFLIGHTS tables in the tableview using flow logic. It displays all the columns in the database table. How can I set in the code to display only selected columns and not all columns.
Also, in these columns displayed I want to make the key columns of SFLIGHT as non editable and the rest of the columns in SFLIGHT editiable. Can you please kindly share the code to implement this.
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page>
    <htmlb:form>
      <htmlb:tableView id              = "tv1"
                       visibleRowCount = "10"
                       selectionMode   = "lineEdit"
                       table           = "<%= flights %>"
                       filter = "SERVER"
                       sort = "server"
                       iterator        = "<%= iterator %>" />
    </htmlb:form>
</htmlb:page>
</htmlb:content>
Thanks
Karen

Hi,
   Please try this code.
<!-- To display Table control on BSP page with table internal table it_hist --!>
          <htmlb:tableView id              = "TV_HIST"
                           headerText      = "Previous History"
                           headerVisible   = "TRUE"
                           footerVisible   = "TRUE"
                           design          = "ALTERNATING"
                           selectionMode   = "LINEEDIT"
                           visibleRowCount = "5"
                           fillUpEmptyRows = "TRUE"
                           table           = "<%= it_hist %>"
                           width           = "500" >
<!-- to show selected columns give required field name --!>
<htmlb:tableViewColumns>
<htmlb:tableViewColumn columnName          = "FIELD1"
                                     title               = "COLUMN1"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
<htmlb:tableViewColumn columnName          = "FIELD2"
                                     title               = "COLUMN2"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
<htmlb:tableViewColumn columnName          = "FIELD3"
                                     title               = "COLUMN3"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
<htmlb:tableViewColumn columnName          = "FIELD4"
                                     title               = "COLUMN4"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
<!-- to make column editable set edit property to TRUE --!>
<htmlb:tableViewColumn columnName          = "FIELD4"
                                     title               = "COLUMN4"
                                     edit = "TRUE"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
            </htmlb:tableViewColumns>
          </htmlb:tableView>

How to Specify a Default Stylesheet to the XSLT processor

How can you specify that a default stylesheet is been used to the XSLT processor?
Thanks
Harsha

Specify the XSLT in the <XDK>/bin/oraxsl batch file.

How to specify a different directory for the Run-Time Engine?

With LV 7.1 it's become even more difficult to create installation sets in third-party tools without having to include the full run-time engine separately.
If you use any of the advanced analysis VIs you have to install the run-time engine (no use in including files in the same directory as the built application) and if you do and you use the old serial VIs you get a problem because the application will load the run-time from the main run-time installation and then look for serpdrv in that directory, not in the application folder...
So - being forced to use the installer builder in the application builder and include the run-time engine in the installation kit I wonder whether it is possible to specify where the run-time should be installed?
By default it will go in a directory called National Instruments in the program files folder, however that is not ideal due to the fact that the users have no relation to the fact that our application needs something from NI...and may end up deleting the directory ("National Instruments? - what do I need that for...let me delete it...). We would like to be able to specify that the run-time is installed silently in a directory named with our company name instead.
MTO

When you create the stand alone, in options you can actually set the temp directory and default directory. You can change it there OR in goto options and check for libraries/directories. You can change it there too.
Kudos always welcome for helpful posts

How do I only show thumbnails in the photo gallery without showing the Main Image?

Hello,
I need help customizing the Spry Photo Gallery Demo...
I would like for the Main Image To Be Hidden when the html
page loads. After the user clicks the thumbnail, I would like to
have the Main Image load centered on the page(with div containing
close button) on a z-index above the thumbnails. While the
thumbnails layer has a fade effect to 10%. After the user clicks
the close button the Main image disappears and the thumbnails layer
fades back to 100%. Then the user can click another thumbnail and
so on and so forth...
Is this possible? I have tried everything I can think of with
my limited knowlege of spry and cant get it to work. I just need
help with the Large image part. The close button and fades I can
handle.
Any help would be most appreciated. Please let me know if
further information is needed from me. Thank you in advance.

There is a third-party program called Attachment Tamer that will do that for you. In the Terminal, you can type this:
defaults write com.apple.mail DisableInlineAttachmentViewing -bool yes
Also note that while Attachment Tamer does some things with the encoding that makes certain email clients display the item as an attachment, what shows up at the receiver's end is solely dependent on their email client and its settings.

How to remove only one row from the database using labview6.1

using labview 6.1 I create a table with various rows and columns and store bulk of data's in them.,, what procedure should I follow to remove only one paticular row from the database? Help me out with an example please,,
Thanking you in advance!

Hi,
If you have the database toolkit you can delete a row using just a SQL Query to "DB Tools Execute Query.VI"
Example:
DELETE FROM Table name Where SerialNum='Value' And Date='Value' And Time='Value'
See also attached VI
Best Regards
Johan
Attachments:
Delete_a_row_in_a_database_table.vi ‏48 KB

How to specify file name while invoking the GET_ZIP_BUNDLE service

Hello.
The GET_ZIP_BUNDLE service by default generate zip file with name "Bundle". I wanted to change this name runtime, that is while invoking this service. How can I do it?
The class ziprenditions.ZipRenditionsHandler most probably handle this service by the method createRenditionBundle.
There I saw a line:
downloadName = LocaleResources.getString("csZipRenditionBundleName", this.m_service);I have tried to print the value of csZipRenditionBundleName and I got "Bundle". I am wondering is there any way to set a value to this message key?
I have tried this idoc function:
<$createRenditionBundle='some_name'$>before invoking the service. But this didn't work.
Also I have tried to change it from Java class, and for that I have defined a custom service and did:
LocaleUtils.encodeMessage("csZipRenditionBundleName", null, "JYM");But this also not working.
What I want is to get the zip file with the name which is the same to the files it is archiving.
For more information, here is how I am invoking the GET_ZIP_BUNDLE service:
I have defined a form element:
<form action="/cs/idcplg" method="POST" id="zipBundleForm" name="zipBundleForm">
   <input type="hidden" value="GET_ZIP_BUNDLE" name="IdcService">
   <input type="hidden" value="pkg:dDocName,pkg:dID,pkg:Rendition,pkg:RevisionSelectionMethod,pkg:AuxRenditionType" name="bundleKeys">
</form>And I have a button with id downloadContent and I have attached the following JavaScript with it:
$('#downloadContent').click(function (event){
   event.preventDefault();
   var formId = "zipBundleForm";
   var counter = 0;
   var renditionType = "";
   $("#zipBundleForm").find(":hidden").each(function() {
      if($(this).attr("name").startsWith("pkg:"))
         $(this).remove();
   $("#downloadContentForm").find('input:checkbox:checked').each(function() {
      renditionType = $(this).val();
      $(".thumbnails").find('input:checkbox:checked').each(function() {
         if($(this).attr('data-type') == 'image'){
            createHiddenInputElement(formId, "pkg:dDocName" + counter, $(this).attr("name"));
            createHiddenInputElement(formId, "pkg:dID" + counter, $(this).attr("id"));
            createHiddenInputElement(formId, "pkg:Rendition" + counter, renditionType)
            createHiddenInputElement(formId, "pkg:RevisionSelectionMethod" + counter, "Specific");
            counter++;
   $("#zipBundleForm").submit();
var createHiddenInputElement = function(formId, elementName, elementValue){
   var newElement = document.createElement("input");
   newElement.setAttribute("type", "hidden");
   newElement.setAttribute("name", elementName);
   newElement.setAttribute("value", elementValue);
   $("#"+formId).append(newElement);
}Thanks in advance.

if you want a fixed bundle name other than "bundle", you can override the localization string entry 'csZipRenditionBundleName' in a component.

How to specify only possible owner of the VM in Hyper-v cluster (Windows 2012R2)

Similar Messages

Maybe you are looking for