How to specify tabbed canvas appearing?

Hi All,
I've three canvases two content and one tabbed, the first content canvas contains a data block which goes to the second content canvas via pressing a button caontins GO_Block.
I've drawed a tabbed canvas (using its specified tool) in that second content canvas but this tabbed one is appearing in both content canvases!
I want this tabbed canvas to appear only in the second content canvas only! How Plz?
Thank you
Note: I'm using Forms 6i

Use SHOW_VIEW('Name of your tab_canvas') to programmatically show a canvas, use HIDE_VIEW('Name of your tab_canvas') to hide it.

Similar Messages

How to create tab canvas from content

Hi,
I have created a form which has one content canvas and multiple stacked canvases. The content canvas displays the first page and then we hv to click on next to go to the next stacked canvas and so on. I want to try making it in tabs (tab canvas) and then I will decide which one looks better and performs good.
Can you guys please give me a detailed instruction on how to convert my content and stacked canvases to tab canvases. I have never done tab canvas. I tried one, I changed one of my present stacked canvas to tab but all the fields and texts were gone and there were just two tabs in it.
Please suggest. Thanks in advance.

I will do so:
I will create a blank tab canvas and then I will cut and copy in every tab page the frame of the content canvas
A tab page for every content canvas
Regards

How to hide tab canvas

My form has a main canvas,over which there are 2 tabbed canvases with two tab pages each
1)1st tab canvas---A,B are tabbed pages
2)2nd tab canvas--C,D are tabbed pages
When A is pressed my second tabbed canvas should appear,whereas when B is pressed,I need to hide the 2nd tab canvas (or) will it be possible that, when I press B,a new window opens up(so that I need not hide canvas)
I am quite new to the forms,So any help would be grately appreciated..
Thank much!

Hi,
To hide the entire canvas, you can use HIDE_VIEW built-in.
HIDE_VIEW('<tab_canvas_name>');To show the canvas, use SHOW_VIEW built-in.
SHOW_VIEW('<tab_canvas_name>');Regards,
Manu.
If my response or the response of another was helpful or Correct, please mark it accordingly

How I use tab canvas

Hi master
Sir
I have one master and multi detail table and I need use the tab canvas
How I use that and how I manage thate
please give me idea
thanking you
Aamir

Aamir,
I notice that you're asking many questions relating to developing and running forms using Oracle Forms directly. This forum is meant for Oracle Designer questions. You will get better responses to your Forms questions by posting them to the Forms OTN forum (Forms
Also, please remember to provide complete information when you ask your question.
- Suresh

How personel information tab will appear in SRM portal

Hi Team,
I am working on SRM 7.0. Strategical sourcing.
Curretnly there is no peorsonel info tab available in SRM portal. What needs to be done from our end to enable that tab in portal.
Thanks,

Hi Viswa,
Try the below link to hide and enable fields in portal.
Field Control for Fields and Maintain Attribute Access Rights by Role - Supplier Relationship Management - SCN Wiki
Thanks
Sri

Tab canvas on a content Canvas

Hi,
I need to put a tab canvas on a content canvas in 10g R2.
and have items from the same data block distributed across the canvases.
I have set them up with the appropriate viewport for the tab canvas, but at runtime, the tab canvas does not appear untill an item on it gets the focus.
Both canvases are set to the same window.
I'm sure this is possible and I think I have done it before but for some unknown reason can't seem to remember how !.
Thanks in Advance
Regards,
Tony Garabedian

Hi Steve,
Yup, it is definitely related to the window, if the window is the form's console window and the window is the first window created in the form (default window created with the first canvas mostly WINDOW1) the tab canvas is behaving in that way.
Create a new window and make sure that this window is not the console window and the behavior is very much normal, the tab canvas appears as soon as the window gets focused.
This what I have found out for now, if later testing shows anything else I'll post the results.
Regards,
Tony Garabedian
I just added a stack canvas on that same window and the problem returned....
So I rearranged the canvases, and purposely set the canvas on the console window, it worked, so now it seems that the problem appears if you have a stacked canvas AND a tab canvas on the same window.
Hope this ain't a bug it sure looks and acts like one though.
Message was edited by:
Tony Garabedian

Display stacked canvas on tab canvas page

Hi,
I am using Forms 10g. I have Content canvas named CANVAS1. I created a tab canvas called TAB_CAN contains TAB_PAGE1 and TAB_PAGE2, Stacked Canvas called STACK1.
If if create tab canvas on content canvas thourhg labout editor. It's display well when forms run. But, i have created manually.
1. How to display tab canvas programatically.
2. How to display stacked canvas on TAB_PAGE1
Regards,
Murali

Looks like you are in the wrong forum.
Please post this in the [Forms forum|http://forums.oracle.com/forums/forum.jspa?forumID=82]
Timo

How to change the background color of a Tab Canvas

Hi All,
I accidentally changed existing background color of a tab Canvas to ' gray' which is not matching with main canvas (which has default).
How can I change background color to default. Please help me.
-Thanks

In the property palette of the tab page, click on the "Background Color" property and click the "Inherit" button on the top of the property palette, this will revert the value of the property to the default when the tab page was created which is <Unspecified>.
But if your tab page has inherited the color from a property class it will revert to what was specified in the property class.
Tony

How can i change the direction of tab canvas in 10g ?

hi all
how can i change the direction of tab canvas in 10g at runtime i want to change the direction from left_to_right to right_to_left when i did that the form not appears well
all prompts of item not dispalyed in order of its sequence ,in spite of that it works in 6i well and change direction without any problems
i have been used set_canvas_property and set_view_property but it doesn't work
can anybody help me in this mater?

please can any body help?

How to move a block from Content to Tab Canvas?

Hi All,
I've make a master and detailed blocks in an content canvas
Now this master block has another some detailed blocks, How to put a tab canvas on this content canvas?
that is if I created a new tab canvas it will appear in another page not in the content canvas!

Is the Tabbed Canvas larger than the Content Canvas? Also, just to clarify, when you created the tabbed canvas - did you draw the tabbed canvas on the content canvas in the Visual Designer? If you created the tabbed canvas by adding it to the Canvas Node in the Object Navigator and then set the appropriate properties to assign the window, x/y coordinates, etc., I've seen this cause unexpected behavior. It is better to draw the tabbed canvas on the content canvas rather than add it to the Canvas node through the object navigator.
Hope this helps,
Craig B-)
If a response is helpful or correct, please mark it accordingly.

How do I get the "Document" tab to appear in the toolbar?

How do I get the "Document" tab to appear on the "Adobe Reader" toolbar?

There is no way to add that. All changes to the Adobe Reader toolbar can be found here:
View->Show/Hide/Toolbar items

How to change content/stacked canvases to tab canvas

Hi,
I have created a form which has one content canvas and multiple stacked canvases. The content canvas displays the first page and then we hv to click on next to go to the next stacked canvas and so on. I want to try making it in tabs (tab canvas) and then I will decide which one looks better and performs good.
Can you guys please give me a detailed instruction on how to convert my content and stacked canvases to tab canvases. I have never done tab canvas. I tried one, I changed one of my present stacked canvas to tab but all the fields and texts were gone and there were just two tabs in it.
Please suggest. Thanks in advance.

Might get a better response in the Forms forum...
Forms

How: Stacked Canvas on Tab Canvas ?

Hi All,
I have content canvas in which I have placed tab canvas with 5 tabs, and on one of the tab I want to place stacked canvas because I have to display multiple blocks on this stacked canvas with vertical scroll bar (This I can specify by saying Vertical scroll bar as Yes for Stacked canvas).
There is a restriction that, it is not possible to place stacked canvas on tab canvas (Possible only on content canvas), so is there any other workaround.
Please let me know if anyone has worked on similar type of screen development. Appreciate if anyone can provide some sample code.
Advance thanks for your time and help.
Regards
CJ

Hi All,
I found the solution and successfully implemented the desired functionality
DECLARE
     v_Tab VARCHAR2(1000);
BEGIN
     v_Tab := GET_CANVAS_PROPERTY('CAN_TABS', TOPMOST_TAB_PAGE);
     IF v_Tab = 'a1' THEN
     GO_BLOCK('BLK1');
          EXECUTE_QUERY;
     ELSIF v_Tab = 'a2' THEN
          GO_BLOCK('BLK2');
          EXECUTE_QUERY;
     ELSIF v_Tab = 'a3' THEN
*          Set_View_Property('CAN_STK_FIS_NET',HEIGHT,280);*
*          Set_View_Property('CAN_STK_FIS_NET',WIDTH,630);*
*          Set_View_Property('CAN_STK_FIS_NET',DISPLAY_POSITION,6,135);*
*          SHOW_VIEW('CAN_STK_FIS_NET');     *
          GO_BLOCK('BLK_FIS1_GRID');
          EXECUTE_QUERY;
END IF;
END ;
I have seperately created stacked canvas 'CAN_STK_FIS_NET' and placed multiple blocks as per requirement and able to achieve the functionality.
Please let me know if any one need any detail explanation.
regards
cj

How to change the number of tab in a Tab Canvas?

hello :)
any answers please ?

user9068133 - Posted: Nov 3, 2010 2:42 PM yes , it works very well on forms 10g, i know that is not a big problem but what can i do ! i have searched on google how to do that but i didn't find nothing .>
What exactly did you search for on Google? What is "that"?
Are you trying to add more tab pages to a Tabbed Canvas from the Forms Builder? If so, user13390506 is sort of right. Click on the "Canvases" node of the Object Navigator press the *<font color="green">green + </font>* button to add a new "Content" canvas to your form. Now you need to open the property pallet of the new canvas and change the "Canvas Type" property to "Tab." You will notice that the icon of the new canvas you created in the Object Navigator has changed. Click on the + node next to your new "Tab" canvas to reveal the "Tab Pages" node. Again, open this node (by clicking on the +) to reveal the individual tab pages. By default, Forms will create two tab pages. You can add a tab page in the "Tab Pages" node by clicking on the node and then clicking on the + button. To remove a tab page from the "Tab Pages" node, click on the tab page you want to remove and then click on the *<font color="red">red -</font>* (minus) button.
If you are trying to add a new tab page during the Form runtime - as I mentioned before - this is not possible.
Also, what is your Forms version?
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How to do that when you open a new tab to appear like the start page after opening the browser?

How to do that when you open a new tab to appear like the start page after opening the browser?

https://addons.mozilla.org/en-US/firefox/addon/newtaburl/
Never used it myself, so I'm not sure if you can set to about:home or not. You'll have to give it a try.

How to specify tabbed canvas appearing?

Similar Messages

Maybe you are looking for