How to specify the charatcer encoding for the parametes Content-Disposition

I want to download a file with chinese name .
response.setHeader("Content-Disposition","attachment; filename=" + fileName);
the above part of code is working fine for english file names. but i am facing problem when i try to get file with chinese name .
The pop up window is not defaulting with the chinese name .
When i searched for net , in one rfc it was specified how to do that one.
http://www.faqs.org/rfcs/rfc2184.html.
I tried it but .. could not able to solve the problem.

Hi,
Am facing similar problem with russian and japanese characters in file name.
I tried the UrlEncoder.encode(filename, "utf-8') api to encode the file name. This worked fine with IE but firefox and safari shows junk for japanese/russian characters.
Anyone having an idea abt this?
Thanks,
Kapil

Similar Messages

  • How to specify a different directory for the Run-Time Engine?

    With LV 7.1 it's become even more difficult to create installation sets in third-party tools without having to include the full run-time engine separately.
    If you use any of the advanced analysis VIs you have to install the run-time engine (no use in including files in the same directory as the built application) and if you do and you use the old serial VIs you get a problem because the application will load the run-time from the main run-time installation and then look for serpdrv in that directory, not in the application folder...
    So - being forced to use the installer builder in the application builder and include the run-time engine in the installation kit I wonder whether it is possible to specify where the run-time should be installed?
    By default it will go in a directory called National Instruments in the program files folder, however that is not ideal due to the fact that the users have no relation to the fact that our application needs something from NI...and may end up deleting the directory ("National Instruments? - what do I need that for...let me delete it...). We would like to be able to specify that the run-time is installed silently in a directory named with our company name instead.
    MTO

    When you create the stand alone, in options you can actually set the temp directory and default directory. You can change it there OR in goto options and check for libraries/directories. You can change it there too.
    Kudos always welcome for helpful posts

  • How to change the Content-Transfer-Encoding for the fmddataa.fmd from base

    Dear all,
       When I using this SO_DOCUMENT_REPOSITORY_MANAGERto send email,I find the fmddata.fmd  file have been changed  to binary file attachment. I don't hope so.any one have good idea to avoid this case occur?
      Can you tell me how to change the Content-Transfer-Encoding for the fmddata.fmd from base64 to quoted-printable.  The quoted-printable is the Content-Transfer-Encoding for text file with extension .txt
    Best Regards,
    Merry

    Thank you

  • How can I specify an area path for the work item created on build failure?

    In our department we are working with multiple build definitions for different parts of one Team project. We heavily use the Team Project feature. Teams are defined by area path nodes, so each team can only see it's area path. No one (except the admins)
    can see the root project node.
    When a build breaks, TFS generates a Bug. Unfortunately, this bug is assigned to the area path root node, so nobody can see the generated bug and act on it.
    We would prefer to specify the area path for the generated work item in the build definition (not template, but property of a build definition), as every build belongs exclusively to one team.
    I have found that you can populate fields of the generated work item by filling the "custom fields" of the "create work item" activity. But how do I set the area path as a parameter?
    Guenter

    Hi Cuenter, 
    Thanks for your post.
    You should set the value like below in that activity:
    New
    Dictionary(Of
    String,
    String)
    From {{"Area
    Path",
    "teamprojectname\areaname"}}
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

    Hi All.
    I have this request.
    BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
    We have jobs scheduled on BODS running smoothly and absolutely fine.
    But to check, i am logging into the admin console and check for the jobs status.
    I would like to have an email to be received from BODS after each job is finished.
    It could succuessful. Or it could fail.
    Whatsoever, i wish to receive an email alert as soon as a job is finished.
    Can anyone advise me as to whether this could be made possible.
    And if yes, how this could be done.
    Thanks for your help in advance.
    In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
    Is there any option similar to that in BODS ?
    Also would like to know :
    how to use the smtp_to or mail_to functions ?
    how to set up the smtp server for this ?
    thanks
    REgards
    indu
    Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

    Hi.
    Since am new to this BODS. I need some help.
    I already have many jobs which are running absolutely fine.
    And when a job runs, and finishes, am able to see the trace saying
    e.g. :
    Job_abc is completed successfully.
    We got the smtp service activated for our test server.
    and we hae a group email id.
    I have put the details of the smtp server / ip address / and said apply restarted.
    The i created a simple test script as below :
    print (' Before email ' );
    smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
    ' the job has failed', 0, 0);
    print('After Email ');
    It does send a email to as per smtp_to whatever email is specified.
    But how to differentiate between a job success
    And a job which has failed.
    I wish to have a mail which says on the subject :
    'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
    ==> IF it is a success
    OR
    'Job ' || job_name() ||' on ' || host_name() || ' has failed'
    ==> if it has failed
    How to make the system identify, whether
    to send a success message or a error message whatever
    Could anyone advise.
    thanks
    indu

  • How to use Add Query Criteria for the MySQL data Base in Netbeans ?

    How to use Add Query Criteria for the MySQL data Base in Netbeans Visual web pack.
    When the Query Criteria is add like
    SELECT ALL counselors.counselors_id, counselors.first_name, counselors.telephone,counselors.email
    FROM counselors WHERE counselors.counselors_id = ?
    when i run this Query in the Query Window
    i get a error message Box saying
    Query Processing Error Parameter metadata not available for the given statement
    if i run the Query with out Query Criteria its working fine.

    *I am glad I am not the only one who have this problem. Part of issue has been described as above, there are something more in my case.
    Whenever I try to call ****_tabRowSet.setObject(1, userDropList.getSeleted()); I got error message as shown below:*
    The Java codes are:
    public void dropDown1_processValueChange(ValueChangeEvent event) {
    Object s = this.dropDown1.getSelected();
    try {
    this.User_tabDataProvider1.setCursorRow(this.User_tabDataProvider1.findFirst("User_Tab.User_ID", s));
    this.getSessionBean1().getTrip_tabRowSet1().setObject(1, s);
    this.Trip_tabDataProvider1.refresh();
    } catch (Exception e) {
    this.log("Error: ", e);
    this.error("Error: Cannot select user"+e.getMessage());
    SQL statement for Trip_tabRowSet:
    SELECT ALL Trip_Tab.Trip_Date,
    Trip_Tab.User_ID,
    Trip_Tab.Destination
    FROM Trip_Tab
    WHERE Trip_Tab.User_ID = ?
    Error messages are shown below:
    phase(RENDER_RESPONSE 6,com.sun.faces.context.FacesContextImpl@5abf3f) threw exception: com.sun.rave.web.ui.appbase.ApplicationException: java.sql.SQLException: No value specified for parameter 1 java.sql.SQLException: No value specified for parameter 1
    com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:559)
    com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.afterPhase(ViewHandlerImpl.java:435)
    com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:274)
    com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
    javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
    org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
    org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
    org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
    org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
    org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
    org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
    org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
    org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
    org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
    org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
    org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
    org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
    com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
    com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
    com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
    com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
    com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
    com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
    com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
    tandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
    java.sql.SQLException: No value specified for parameter 1
    at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
    at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1674)
    at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1622)
    at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1332)
    at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:193)
    at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:979)
    at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1439)
    at com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1274)
    at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:335)
    at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(CachedRowSetDataProvider.java:306)
    at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(CachedRowSetDataProvider.java:639)
    at com.sun.webui.jsf.component.TableRowGroup.getRowKeys(TableRowGroup.java:1236)
    at com.sun.webui.jsf.component.TableRowGroup.getFilteredRowKeys(TableRowGroup.java:820)
    at com.sun.webui.jsf.component.TableRowGroup.getRowCount(TableRowGroup.java:1179)
    at com.sun.webui.jsf.component.Table.getRowCount(Table.java:831)
    at com.sun.webui.jsf.renderkit.html.TableRenderer.renderTitle(TableRenderer.java:420)
    at com.sun.webui.jsf.renderkit.html.TableRenderer.encodeBegin(TableRenderer.java:143)
    at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:810)
    at com.sun.webui.jsf.component.Table.encodeBegin(Table.java:1280)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:881)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
    at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
    at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
    at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:285)
    at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:133)
    at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
    at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
    at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
    at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
    at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
    at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
    at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
    at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
    at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
    at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
    at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
    at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
    Also when I tried to update my MYSQL connector / J driver to version 5.1.5 from 5.0.5 (NB 5.5.1) and 5.0.7 (NB 6.1), I could not get it work (looooong time to search some JDBC classes and with no response in the end) on both of my Netbean 5.5.1(on PC) and Netbean 6.1(on laptop) IDEs.
    Could anybody look into this issue.
    Many thanks
    Edited by: linqing on Nov 22, 2007 4:48 AM

  • Using the value "Image/*" for the accept attribute of the HTML input Element, how can I add .pdf to the array of preconfigured file types (.jpe, .jpg, .jpeg, .?

    On a form, using the value "image/*" for the accept attribute of the HTML input Element, how can I add .pdf to the array of pre-configured file types (.jpe, .jpg, .jpeg, .gif, .png, .bmp, .ico, .svg, .svgz, .tif, .tiff, .ai, .drw, .pct, .psp, .xcf, .psd, .raw)?
    Say I wanted to add .gif, .jfif or .ico. I find this array limited, how can I add types to image?
    <input type="file" name="file" accept="image/*" id="file" />
    mimeTypes.rdf does not seem to allow this.

    ''mimeTypes.rdf'' has nothing to do with web development. It's a file that stores your file handling preferences (e.g. if you want ZIP files automatically saved or opened).
    You can't change the file types of the pre-defined content specifiers (audio/*, video/*, image/*), but you can specify additional MIME types. To add PDF to your above example,
    <pre><nowiki><input type="file" name="file" accept="image/*,application/pdf" id="file" /></nowiki></pre>
    For details, see
    * [https://developer.mozilla.org/En/HTML/Element/Input developer.mozilla.org/En/HTML/Element/Input]

  • Why did TB set the char encoding for a reply to charset=UTF-16LE ?

    I got a message from Google AdWords in HTML format and wrote a reply. When I sent it I got a timeout trying to send it. I use AVG antivirus to scan outgoing messages using a "local server" at address 127.0.0.1.
    Note that this was my second reply to such a message from AdWords. The only thing I could see that was different was a longer subject line (ending with three periods or dots) and a longer HTML message to which I was replying.
    I tried many things to fix the problem and I cannot remember them, sorry.
    Finally, I got success after truncating the message and the long subject line. The reply was sent instantly, as usual, instead of timing out.
    But it wasn't really success. When I looked at the sent message, the characters in my reply (only) were in Chinese. Looking at the raw (source) message, I see that the charset was set as follows: Content-Type: text/plain; charset=UTF-16LE; format=flowed .
    This seems like a strange charset; nowhere in my settings do I specify anything other than Western (ISO-8859-1).
    I finally was able to send the message successfully (I think) by using Options > Character Encoding > Western (ISO-8859-1), which seems to force the message to be sent using this standard encoding instead of Little Endian.
    What caused this problem to happen? Is there a TB overflow bug for long subject lines?
    I realize that TB is an old and unsupported product, but it seems to be the only good email client to use with Windows 8, so I'm just hoping someone knows something about this.

    Originally posted by: warren.tang.nospam.com
    Warren Tang wrote:
    > Warren Tang wrote:
    >> Warren Tang wrote:
    >>> Hi everybody,
    >>>
    >>> I've been trying to set the default encoding of new files as UTF-8.
    >>> Here are the two settings I've set:
    >>>
    >>> 1. Windows > Preferences > General > Content Types, set UTF-8 as the
    >>> default encoding for all content types.
    >>> 2. Windows > Preferences > General > Workspaces, set "Text file
    >>> encoding" to "Other : UTF-8".
    >>>
    >>> However when I create a new text file, the encoding is always
    >>> ANSI/ISO-8859-1. What did I missed? Thanks.
    >>>
    >>> Regards,
    >>> Warren
    >>
    >> I've also tried
    >> Project Properties > Resource > Text file encoding = UTF-8
    >> However it doesn't work either.
    >>
    >> The only thing that works is changing the file's encoding property,
    >> but I don't want to change it every time I create a new file.
    >>
    >> Is it a bug?
    >
    > It turns out that there are other places I need to set up for HTML and
    > CSS files:
    >
    > Windows > Preferences > Web > CSS Files > Encoding = UTF-8
    > Windows > Preferences > Web > HTML Files > Encoding = UTF-8
    I'm getting mad... The file (on the disk) is still not encoded in UTF-8
    but ANSI.

  • Setting character encoding for the whole app

    I have a MySQL base which uses latin1 character set. I don't know which Java uses, but when I print some polish signs it puts ? instead. How do I change the character set for the whole application? Or maybe there is some completely different way?

    1. the base I have is capable of storing polish chars - at least when I view it within my visual manager it shows then no problem, so I think it's not that
    2. I don't use the console - I use the JTable component to show the data
    3. java stores using utf, but the app uses default system encoding - I checked it with:
    Charset c = Charset.defaultCharset();
    System.out.println(c.displayName());So which solution do you suggest?
    And how can I change the encoding the application?
    Thank's for your interest!

  • How do i query the module object for the interface of the module-specific interface I require

    Hi there.
    Currently using LabVIEW 2012/TestStand 2012.
    I am attempting to edit the LabVIEW Text Sequence Translator, and in the CreateStep.vi I am trying to create a step that is of type WIS_Sequence_Call (a custom version of NI_Types.ini-->SequenceCall).
    I need to set the file pathname, sequence name and parameter values in the step.  I believe I need to get access to the SequenceCallModule class to do this.
    This help file SequenceCallModule states in the description: "To access the properties and methods of a specific module class, query the Module object for the interface of the module-specific interface you want to acquire.".
    What exactly is meant by "query" here?  It looks like "Specify" might be what I am after, but I want this done programmatically, ie no dialog boxes.
    See my snippet below.
    Thanks.

    Thanks for the reply Charles.
    I have been using the 2012 version of the poster.
    I can get access to the Module class from the Step Class as shown in the snippet above, but I can't see how to get to SequenceCallModule? The "To more specific class" VI doesn't seem to work for TS refs. Is there no way to derive the SequenceCallModule from this?
    Also I can use the TSAdp.SequenceCallModule reference, but I need to link this to the relevant step that I've just created.  Can NI please provide me with a link to any examples on this?
    Thanks

  • How do i query the module object for the interface of the module-spe​cific interface I require

    Hi there.
    Currently using LabVIEW 2012/TestStand 2012.
    I am attempting to edit the LabVIEW Text Sequence Translator, and in the CreateStep.vi I am trying to create a step that is of type WIS_Sequence_Call (a custom version of NI_Types.ini-->SequenceCall).
    I need to set the file pathname, sequence name and parameter values in the step.  I believe I need to get access to the SequenceCallModule class to do this.
    This help file SequenceCallModule states in the description: "To access the properties and methods of a specific module class, query the Module object for the interface of the module-specific interface you want to acquire.".
    What exactly is meant by "query" here?  It looks like "Specify" might be what I am after, but I want this done programmatically, ie no dialog boxes.
    See my snippet below.
    Thanks.
    Christopher Farmer
    Certified LabVIEW Architect
    Certified TestStand Developer
    http://wiredinsoftware.com.au
    Solved!
    Go to Solution.

    Thanks for the reply Charles.
    I have been using the 2012 version of the poster.
    I can get access to the Module class from the Step Class as shown in the snippet above, but I can't see how to get to SequenceCallModule? The "To more specific class" VI doesn't seem to work for TS refs. Is there no way to derive the SequenceCallModule from this?
    Also I can use the TSAdp.SequenceCallModule reference, but I need to link this to the relevant step that I've just created.  Can NI please provide me with a link to any examples on this?
    Thanks
    Christopher Farmer
    Certified LabVIEW Architect
    Certified TestStand Developer
    http://wiredinsoftware.com.au

  • How to get the delivery number for the sales order

    hi
    how to get the delivery number for the sales order

    Hi,
    1. IN VA03, enter the sales order and click on the document flow button. From there you can check the delivery document.
    2. In SE11, enter VBFA(Document flow) table and enter the sales order in VBELV field and in VBTYP_N field enter 'J' to specify that you want to check if there is already a delivery document for that sales order.
    Hope it helps...
    P.S. Please award points if it helps...

  • How to specify only possible owner of the VM in Hyper-v cluster (Windows 2012R2)

    Good day,
    We want to prevent the migration of
    virtual machines between the cluster nodes in indows 2012R2 Hyper-V cluster.
    How to specify only possible owner of the VM in Hyper-v cluster (Windows 2012R2) ?
    SQL clustering

    Hi Al_leont,
    I ask if your using FOCM or SCVMM as you configure possible owners in different places. As well as possible owners you can also configure preferred owners, affinity and anti affinity groups and placement rules.
    To configure possible owner in FOCM you select the VM you want to configure, then in the bottom window select the resources tab (change from summary tab). Right click the Virtual Machine Resource, then select the Advance Polices tab of
    the popup window. You should then see the hyper-V nodes as Possible owners.
    In SCVMM you just right click on the VM and select properties, then settings form the popup window.
    Preferred owners, affinity and anti affinity groups, placement rules are configured in other locations or by PowerShell.
    Kind Regards
    Michael Coutanche
    Blog:   
    Twitter:   LinkedIn:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • How to set up the inspection plan for the material in super BOM

    Hello,
    how to get the accurate inspection plan of the IQC for the material which was class item in a super BOM?
    I've gotten the characteristic value from the sales order, and get the PO after MPR. The problem is how to specify the target value and the range of inspection characteristic in inspection plan, because the value is temporary?
    Thanks!
    Lin

    Hello,
    I think you need to create MIC which linked with the configuration characteristic, and specify "inspection by configuration" for the inspection type.
    then the configuration value in the sales order can be transfered to the inspection lot when production released or goods receipts if you use inspection type 03 or 04. that means the value range for the MIC will be determined dynamically for each sales order.
    Regards, Winnie

  • How to set up automatic payment for the purchase order

    Hi, All,
    I have one question how to set up automatically payment for the Rent Office purchase Order?
    There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
    Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
    Thanks in advance

    Either you can set up ERS or you can pay directly from the FI side.
    Prerequisites
    Evaluated receipt settlement must be flagged in the purchase order item.
    The vendor must be flagged as being subject to ERS in the vendor master record.
    The goods receipt must refer to a purchase order.
    Goods-receipt-based Invoice Verification must be defined for the purchase order item.
    A tax code must have been maintained in the purchase order item.
    The order price of the materials may not be an estimated price.
    If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
    In Purchasing, you can delete the default ERS indicator in a purchase order item.
    Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
    The selection screen appears.
    You can use the following criteria to narrow down selection of the transactions to be settled:
    Company code
    Plant
    Goods receipt posting date
    Goods receipt document
    Fiscal year of the goods receipt
    Vendor
    Purchase order and order item
    You can define the selection criteria for the invoice documents by:
    Delivery
    Purchase order
    Purchase order item
    Goods receipt document
    Credit memo
    Invoice
    Currency
    Choose  Execute.
    The system issues a log for Evaluated Receipt Settlement, which displays the following:
    Settled
    In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
    Could not be settled
    In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
    If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
    Select the item and choose Exclude from ERS.
    The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
    You can display the following environment information for the order items selected. To do this, choose Goto ®:
    Display purchase order
    Display invoice
    Display material document
    Display long text

Maybe you are looking for