How to specify the value help list of a variable?

Hi Gurus
   My requirement is like this. The query has at least two fields( manager and employee). A group of employees belong to a certain manager. When an employee is going to run the query, he will fill an employee number into a variable so that the information of the employee will be displayed in the query. My question is that is it possible to display all the employees of the same manager when the user trys the value help of the variable? Right now, the list of all employees will be displayed. I just want the ID list of employees of the same manager will be displayed.
for example: here is the data
manager              employee
A                          101
A                          102
A                          103
B                           104
C                           105
C                           106
C                           107
IF user 105 runs the query and he clicks on the value help button of the varibale, only 105, 106, 107 will be displayed for him to choose instead of list of all employees.
if is possible? how to? thanks

Hi Stephen Xue,
I think it can be done through Compounding option in the maintenance of the characteristics. Make the Manager as the compounding attribute of Employee. I am not sure about it, but have a try on it.
Hope it helps.
Veerendra.

Similar Messages

How to hold the value in List box.

Hi All,
On my screen painter Screen I am displaying the Sold to party and ship to party with thier address.
I am also displaying the Shipping condition based on ship to party. To display the shipping condition i am using list box. Once the user enter the sold to party automatically all the field is going to populate in their respective fields. I am facing the problem that, The list box getting populated with shipping condition but once you choose the shipping condition and hit the enter the list box getting refreshed. I am using this code in PAI event. And I can Only use this in PAI.
The Function i am using for list box is CALL FUNCTION 'VRM_SET_VALUES'.
Pls suggest me how to hold the value in List box.
Thanks,
Rakesh

Hi,
Now i am using in PBO.
the code below in in PBO.It is still not holding the value.
      if list[] is initial.
      perform SHP_COND.
      endif.
form SHP_COND .
*DATA: SHOP(80).
    clear : GT_VSBED, list.
    refresh : GT_VSBED, list.
     select vsbed
       from knvv AS K
       into table GT_VSBED
      where Kvkorg = vbak-vkorg "Kkunnr = GV_STPH
      and K~vtweg = vbak-vtweg
      and K~spart = vbak-spart.
    select VSBED vtext
      from TVSBT
    into table list
    for all entries in GT_VSBED
    where spras = sy-langu
    and vsbed = GT_VSBED-VSBED.
*break-point.
NAME = 'SHP_CON'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
    id                    = NAME
    values                = LIST[]
EXCEPTIONS
   ID_ILLEGAL_NAME       = 1
   OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " SHP_COND
Thanks,
Rakesh

How to fill the values in List Box?

Hi Experts,
Can anyone explain me how to fill the values in the List Box such that the value should be from the table?
For Example : Fill the EmpID from table T1 into the ListBox?
Thanks in Advance,
Regards,
Raghu

hi,
and u doing it through report means from se38 than here is code...
DATA : BEGIN OF itab OCCURS 0,
        matnr LIKE mara-matnr,
       END OF itab.
DATA : ok_code LIKE sy-ucomm.
CALL SCREEN 0200.
*&      Module STATUS_0200 OUTPUT
      text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'Z200'.
ENDMODULE.                 " STATUS_0200 OUTPUT
*&      Module USER_COMMAND_0200 INPUT
      text
MODULE user_command_0200 INPUT.
CASE ok_code.
    WHEN 'BACK' OR 'UP' OR 'CANC'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0200 INPUT
*&      Module mat_val INPUT
      text
MODULE mat_val INPUT.
SELECT matnr FROM mara INTO CORRESPONDING FIELDS OF TABLE itab
    WHERE matnr BETWEEN '000000000000000101' AND '000000000000000109'.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield               = 'MATNR'
       VALUE_ORG              = 'S'
      tables
        value_tab              = itab
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDMODULE.                 " mat_val INPUT
<b>And this is flow logic..</b>
PROCESS BEFORE OUTPUT.
MODULE status_0200.
PROCESS AFTER INPUT.
MODULE user_command_0200.
PROCESS ON VALUE-REQUEST.
FIELD itab-matnr MODULE mat_val.

How to specify the XML Declaration for an XML variable

I need to set the XML declaration for my XML variable as
follows:
var employees:XML =
<?xml version="1.0" encoding="utf-8"?>
<employees>
<employee ssn="123-123-1234">
<name first="John" last="Doe"/>
<address>
<street>11 Main St.</street>
<city>San Francisco</city>
<state>CA</state>
<zip>98765</zip>
</address>
</employee>
<employee ssn="789-789-7890">
<name first="Mary" last="Roe"/>
<address>
<street>99 Broad St.</street>
<city>Newton</city>
<state>MA</state>
<zip>01234</zip>
</address>
</employee>
</employees>;
However, if I specify <?xml version="1.0"
encoding="utf-8"?>, I get a design time and compile error. If I
remove it it works fine. But the server to which I send this XML is
expecting the declaration. Can somebody help me with this?
Thanks

I work mostly with the Java versions of the parser so you'll have to make the translation to C++. As far as I know, you can't use the SAX API to access to the encoding.
You need to use the DOM along with Oracle's extension to the basic DOM functionality. Oracle's package, oracle.xml.parser.v2 defines a class which implements the Document interface called XMLDocument. This class has a method, getEncoding(), which returns the encoding. You would use the method in getDocument() in the Parser base class inherited by DOMParser to retrive the XMLDocument.
Jeff

How to get the value entered in input enabled field of a list output?

Hi all,
I am developing a program to display list with two input enabled fields . After users enetered the values into these fields I need to do some calculations based on these values and modify the value of another field in the list.
But i couldn't have an idea how to read the values after users enter into these fields.
Please help me on solving this problem? If possible please provide the sample code.
Thanks,
Aravind.

You can enable disable screen fields in at selection screen output event.
And by using loop at screen.
And for changing the values you can do in initialization event.
I Hope you are doing these in Reports.

How to implement multiple Value Helps within the same Application ??

Dear Experts,
I want to implement multiple value helps in the same view.For that I have declared exporting parameters of type 'wdy_key_value_table.' within the component controller for each of the value helps.While I do activate and test the application I get the following error :
The following error text was processed in the system HE6 : A row with the same key already exists.
The error occurred on the application server hsdnt24s11_HE6_00 and in the work process 4 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: IF_PO_VIEW1~VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: WDDOINIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_INIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: DO_INIT of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
I dont know how to implement multiple value helps.Need your help on this.
Regards,
Mamai.

Hi
Hint is : A row with the same key already exists it means , It is assigning the same value/Key to row and you are calling it at WDDOINIT so it giving error at the time of initialization .
Better way to do the coding at some event in view OR if not possible than just execute the first value help in wddoinit later clear all the value before gettig the other Value help. Code it at WdDoModify View to get its run time behaviour.
BR
Satish Kumar

How to specify the target name while deploying a code in OSB-- Plz Help

Hi all,
Am working in creating a cluster environment. For my testing i created a new managed server(OSB_Server) in 9001 port in the admin console itself and that server started running. The default managed server(Admin_Server) is in 7001 port. So when i deploy a code in 7001 sb console the WSDL gets exposed in 7001 because the default admin server port is 7001. While deploying a code in service bus admin console we are not specifying the target name. So how to specify the target name while deploying the code in service bus admin console. Plz help me.
Regards
Prabhu

Hi Prabhu,
There are three kind of server architecture possible for OSB -
1. Single server - Everything gets deployed on Admin server itself
2. Admin Server + Single Managed Server for OSB -- OSB configuration gets deployed on OSB managed server. OSB resources (proxy service, WSDL, Schema) will remain available on OSB managed server port only and NOT on admin server port
3. Admin Server + OSB cluster -- OSB configuration gets deployed on OSB cluster. OSB resources (proxy service, WSDL, Schema) will remain available on OSB Cluster port(s) only and NOT on admin server port
Converting one type of server architecture to any other type, requires a manual tedious process, so it is suggested that you create domain accordingly i.e. if you need clusters then while creating domain itself, create OSB cluster, so that all OSB applications gets deployed to OSB cluster. I will suggest you to create a clustered domain from scratch and import the configuration from your existing domian to this new clustered domain.
You may refer-
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15022/toc.htm
Regards,
Anuj

How to compare the values stored in the list

Hi,
I am having the requirement that i want to compare the values stored in the list.How to store the values in the list and compare the list values stored inside it.
Regards,
Ahamad

http://java.sun.com/j2se/1.5.0/docs/api/java/util/Collections.html#sort(java.util.List)
http://java.sun.com/j2se/1.5.0/docs/api/java/util/Collections.html#sort(java.util.List,%20java.util.Comparator)
http://java.sun.com/j2se/1.5.0/docs/api/java/util/Comparator.html
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Comparable.html

How to read the 'Input help with fixed values' of domain .

How to read the 'Input help with fixed values' of domain .
The domain has a Value range i want to read those values .
Are these values stored in any table ?
Plz help me i need it ver badly...
Thanks in Advance...

Hi Chandra Shekhar,
To read the 'Input help with fixed values' of domain , you can use the function module : HR_P_GET_FIXED_VALUE_TEXT.
iIf you enter the domain name, you will find the fixed values entered in the domain.
These values are stored in a table DD07L(DD zero 7 L). Here the values are stored based on domain name.
See if it works for you.
Award points if its helpful.
Regards,
Bhanu

How to trace the value passed by select list

Hi,
Is it possible to know what value is passed by the select list.
eg:
:p1_testid -- is the select list name .
if select list contains 3 values ... value1, value2, and value3. and I select value2 from the select list.
I want to confirm it that the value I selected is the same value passed to the query.
- select * from Test where Testid=:p1_testid;
How to trace the value of :p1_testid before query execution.
Thanks.

check your session state to see what value the select list has..
From developer tools at bottom of running page, select session, then look for the value associated with your select list..
Thank you,
Tony Miller
UTMB/EHN

How to compare the value of a specied attribute to a string

I am looking for an example of how to compare the value of an attribute to a string. (I think)
I have been trying to:
if (attrs.get("title")== "Vampire") -- you already know this did not work.
How can I check to see if the title="Vampire"?
The code below will get me the title of admin (which should be Vampire)
import javax.naming.Context;
import javax.naming.directory.InitialDirContext;
import javax.naming.directory.DirContext;
import javax.naming.directory.Attributes;
import javax.naming.NamingException;
import java.util.Hashtable;
class Giles {
public static void main(String[] args) {
          Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY,
     "com.sun.jndi.ldap.LdapCtxFactory");
env.put(Context.PROVIDER_URL, "ldap://192.168.1.55:389/o=sunnydale");
     try {
     DirContext ctx = new InitialDirContext(env);
     Attributes attrs = ctx.getAttributes("cn=admin");
     System.out.println("Title: " + attrs.get("title").get());
     ctx.close();
     } catch (NamingException e) {
     System.err.println("Problem getting attribute: " + e);
Thank you!!
Steve

I guess, you are looking for searching for attributes of an user object.
Here is the sample code to list all the attributes of an 'user' objectclass.
Tell me if it helps or not.
import java.util.Hashtable;
import javax.naming.ldap.*;
import javax.naming.directory.*;
import javax.naming.*;
public class GetAttributes
     public static void main (String[] args)
          Hashtable env = new Hashtable();
          //Must use either the userPrincipalName or samAccountName,
          //Cannot use the distinguished name
          String adminName = "cn=abcd,cn=Users,dc=ssotest,dc=com";
          String adminPassword = "DEF1234";
          String ldapURL = "ldap://pni3w067:389";
          env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
          env.put(Context.SECURITY_AUTHENTICATION,"simple");
          env.put(Context.SECURITY_PRINCIPAL,adminName);
          env.put(Context.SECURITY_CREDENTIALS,adminPassword);
          //connect to my domain controller
          env.put(Context.PROVIDER_URL,ldapURL);
          try {
               // Create the initial directory context
               DirContext ctx = new InitialLdapContext(env,null);
               // Create the search controls
               SearchControls searchCtls = new SearchControls();
               //Specify the search scope
               searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE);
               //specify the LDAP search filter
               String searchFilter = "(&(objectClass=user))";
               //Specify the Base for the search
               //cn=policygroup,ou=policyusers,ou=ssoanay,;
               //String searchBase = "ou=policyusers,ou=ssoanay,dc=ssotest,dc=com";
               String searchBase = "cn=abcd,cn=users,dc=ssotest,dc=com";
               //initialize counter to total the results
               int totalResults = 0;
               // Search for objects using the filter
               NamingEnumeration answer = ctx.search(searchBase, searchFilter, searchCtls);
               //Loop through the search results
               while (answer.hasMoreElements()) {
                    SearchResult sr = (SearchResult)answer.next();
                    totalResults++;
                    System.out.println("\nName of Object : " + sr.getName());
                    // Print out some of the attributes, catch the exception if the attributes have no values
                    Attributes attrs = sr.getAttributes();
                    //System.out.println("6");
                    if (attrs != null) {
                         try {
                              /*NamingEnumeration enum = attrs.getIDs();
                              while(enum.hasMore()) {
                                   System.out.println("IDs:"+enum.next().toString());
                              NamingEnumeration enum2 = attrs.getAll();
                              while(enum2.hasMore()) {
                                   System.out.println("Attribute - "+enum2.next().toString());
                         catch (Exception e)     {
                              System.out.println("Exception:" +e.getMessage());
                    else {
                         System.out.println("attribute is null");
               System.out.println("Total results: " + totalResults);
               ctx.close();
          catch (NamingException e) {
                    System.err.println("Problem searching directory: " + e);
     //return 0;
}

How to set the value in SelectOneChoice

Hi,
I need an help....
can anyone please tell me how to set the value in SelectOneChoice.
I want to set the value at index 3
i am trying selectOneChoice1.setvalue(new Integer(3)); but it is throwing an NullPointerException.
Thanks,
Neha

Hi,
is it ADF bound? If so then you set the default value to the list binding in the PageDef file. The value of the component must be bound to a method expression, which is why you see an exception. However, I think we need more information
Frank

HOW to Restrict the input Help for 0MATERIAL in the BPS Layout

Hi,
I have requirement to Restrict the input Help for 0MATERIAL in the BPS Layout.
For Example if the Planning Package is Restricted to SALES ORGANISATION ( 3000 ) then the system shuold check the 0MAT_SALES where SALES ORGANISATION IS "3000" )AND PASS THE Material Numbers to the 0material list.
I have Copied the standard Funtcion group "UPF_VARIABLE_USER_EXIT" to Z fucttion and have attached to Z Variabe as User Exit .
this Variable is Attached to 0material in the Planning Pakage. So tha now the 0MATERIAL is restricted to the variable which is having the User Exit.
But how to acces the Values of Planning Package for which the Layout is bein Executed from this Z User Exit ???
I Know how to restrict the input help, but my only problem is that how to get the values of Planning package through this User Exit.
Please suggest if it is possible.
Regards,
Nilesh Labde

Hi Nilesh,
As I understand from your question,you know how to restrict but the issue is to know the value in the package with which you need to restrict.
There are two tables which can help you finding the value used in package for sales organisation:
1. UPC_PACKAGE
2. UPC_OPTIOS
How to use ?
From UPC Package you will get one GUID, Hit the second table UPC_OPTIOS with this GUID.
In field "FIELDNAME" enter the name of the characteristic whose value is req (sales organisation in your case)
Hope this helps you
Mann

How to get the value from a JavaScript and send the same to Java file?

Hi.
How to get the value from a JavaScript (this JS is called when an action invoked) and send the value from the JS to a Java file?
Thanks and regards,
Leslie V

Yes, I am trying with web application.
In the below code, a variable 'message' carries the needed info. I would like to send this 'message' variable with the 'request'.
How to send this 'message' with and to the 'request'?
Thanks for the help :-)
The actual JS code is:
function productdeselection()
var i=0;
var j=0;
var deselectedproduct = new Array(5);
var message = "Are you sure to delete Product ";
mvi=document.forms[0].MVI;
mei=document.forms[0].MEI;
lpi=document.forms[0].LPI;
if(null != mvi)
++i;
if(null != mei )
++i;
if(null != lpi)
++i;
if(null != mvi && mvi.checked)
deselectedproduct[++j]="MVI?";
if(null != mei && mei.checked)
deselectedproduct[++j]="GAP?";
if(null != lpi && lpi.checked)
deselectedproduct[++j]="LPI?";
if( 0!=j)
if(i!=j)
for (x=0; x<deselectedproduct.length; x++)
if(null != deselectedproduct[x])
message =message+ "-" +deselectedproduct[x];
alert(message);
else
//alert(" You cannot remove all products!");
return false;
return true;
}

How to get the value from databank

Hi,
How to get the value from databank? and how to set the same value to visual script object?
thanks,
ra

Hi,
You can use GetDatabankValue(HeaderName, Value) to get the value from databank and SetDataBankValue(HeaderName, Value) to set the value to databank.
You can refer to the API Reference to see list of associated functions and techniques we can use with related to Data Bank.
This is the for OFT but if you are using Open Script then you have direct access for getting the databank value but when it comes to setting a value you have to use File operation and write you own methods to do the set operation.
Thanks
Edited by: Openscript User 100 on Nov 13, 2009 7:01 AM

How to specify the value help list of a variable?

Similar Messages

Maybe you are looking for