How to start emctl in windows in silent mode.

hi all,
I need to create a bat file on windows with the below commands.
d:\orainf\bin\oidmon start
d:\orainf\bin\oidctl server=oidldapd instance=1 start
d:\orainf\dcm\bin\dcmctl start
d:\orainf\bin\emctl start
d:\ora9iAS\dcm\bin\dcmctl start -co OC4J_BI_Forms
d:\ora9iAS\dcm\bin\dcmctl start -co "HTTP Server"
But the problem is the "emctl start" does not come out of the command prompt and I have to do a Ctrl+C to execute the next set of commands. But the same command works in silent(non interactive) mode in Unix.
Can anyone help me with this?
thanks in Advance
Bijesh

hi Chris,
I think you are right. It is not a good idea to override normal start.
But in my case, if I use a start, I will not have control over the process and How will I know whether my emctl has started successfully before starting the next process?
regards
Bijesh

Similar Messages

How to start ProC in windows xp

Hi,
i have Oracle10g client and database server installed on my windows xp.
i am not sure how to start ProC.
and is there a GUI ProC that i can start.
Can someone guide me please.
Thanks,
Philip.

9iR2: http://download-west.oracle.com/docs/cd/B10501_01/win.920/a96111/toc.htm
10gR2: http://download-east.oracle.com/docs/cd/B19306_01/win.102/b14321/toc.htm

How to start CPS in windows

After the server reboot I can't bring CPS back up in Windows server. Can anyone tell me how to start CPS? i have tried start from JRun but didn't work. Below are the error i got.
10/28 09:22:42 error Deployer Service failed to deploy C:\Program Files\Macromedia\Contribute Publishing Server\jrun4\servers\contribute-wps\contribute
[3]java.net.MalformedURLException: no protocol: Files/Macromedia/Contribute
    at java.net.URL.<init>(Unknown Source)
    at java.net.URL.<init>(Unknown Source)
    at java.net.URL.<init>(Unknown Source)
    at sun.rmi.server.LoaderHandler.pathToURLs(Unknown Source)
    at sun.rmi.server.LoaderHandler.loadProxyClass(Unknown Source)
    at java.rmi.server.RMIClassLoader$2.loadProxyClass(Unknown Source)
    at java.rmi.server.RMIClassLoader.loadProxyClass(Unknown Source)
    at sun.rmi.server.MarshalInputStream.resolveProxyClass(Unknown Source)
    at java.io.ObjectInputStream.readProxyDesc(Unknown Source)
    at java.io.ObjectInputStream.readClassDesc(Unknown Source)
    at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
    at java.io.ObjectInputStream.readObject0(Unknown Source)
    at java.io.ObjectInputStream.readObject(Unknown Source)
    at java.rmi.MarshalledObject.get(Unknown Source)
    at jrun.naming.JRunNamingContext.connectToNameServer(JRunNamingContext.java:1412)
    at jrun.naming.JRunNamingContext.getRemoteContextProxy(JRunNamingContext.java:1319)
    at jrun.naming.JRunNamingContext.getContextProxy(JRunNamingContext.java:1135)
    at jrun.naming.JRunNamingContext.lookup(JRunNamingContext.java:517)
    at jrun.naming.JRunNamingContext.lookup(JRunNamingContext.java:495)
    at javax.naming.InitialContext.lookup(Unknown Source)
    at jrunx.util.EncContextUtil.initializeENC(EncContextUtil.java:78)
    at jrunx.util.EncContextUtil.initializeServerENC(EncContextUtil.java:52)
    at jrun.servlet.WebApplicationService.initializeENC(WebApplicationService.java:1524)
    at jrun.servlet.WebApplicationService.postStart(WebApplicationService.java:254)
    at jrun.deployment.DeployerService.initModules(DeployerService.java:711)
    at jrun.deployment.DeployerService.createWatchedDeployment(DeployerService.java:242)
    at jrun.deployment.DeployerService.deploy(DeployerService.java:430)
    at jrun.deployment.DeployerService.checkWatchedDirectories(DeployerService.java:179)
    at jrun.deployment.DeployerService.run(DeployerService.java:891)
    at jrunx.scheduler.SchedulerService.invokeRunnable(SchedulerService.java:223)
    at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:451)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
[2]javax.naming.CommunicationException: no protocol: Files/Macromedia/Contribute [Root exception is java.net.MalformedURLException: no protocol: Files/Macromedia/Contribute]
    at jrun.naming.JRunNamingContext.connectToNameServer(JRunNamingContext.java:1417)
    at jrun.naming.JRunNamingContext.getRemoteContextProxy(JRunNamingContext.java:1319)
    at jrun.naming.JRunNamingContext.getContextProxy(JRunNamingContext.java:1135)
    at jrun.naming.JRunNamingContext.lookup(JRunNamingContext.java:517)
    at jrun.naming.JRunNamingContext.lookup(JRunNamingContext.java:495)
    at javax.naming.InitialContext.lookup(Unknown Source)
    at jrunx.util.EncContextUtil.initializeENC(EncContextUtil.java:78)
    at jrunx.util.EncContextUtil.initializeServerENC(EncContextUtil.java:52)
    at jrun.servlet.WebApplicationService.initializeENC(WebApplicationService.java:1524)
    at jrun.servlet.WebApplicationService.postStart(WebApplicationService.java:254)
    at jrun.deployment.DeployerService.initModules(DeployerService.java:711)
    at jrun.deployment.DeployerService.createWatchedDeployment(DeployerService.java:242)
    at jrun.deployment.DeployerService.deploy(DeployerService.java:430)
    at jrun.deployment.DeployerService.checkWatchedDirectories(DeployerService.java:179)
    at jrun.deployment.DeployerService.run(DeployerService.java:891)
    at jrunx.scheduler.SchedulerService.invokeRunnable(SchedulerService.java:223)
    at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:451)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
Caused by: java.net.MalformedURLException: no protocol: Files/Macromedia/Contribute
    at java.net.URL.<init>(Unknown Source)
    at java.net.URL.<init>(Unknown Source)
    at java.net.URL.<init>(Unknown Source)

9iR2: http://download-west.oracle.com/docs/cd/B10501_01/win.920/a96111/toc.htm
10gR2: http://download-east.oracle.com/docs/cd/B19306_01/win.102/b14321/toc.htm

How to start my mac book pro safe mode?

my mac book pro is not start up but showing white screen . what should i do ?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

How to start gcalctool in solaris in scientific mode by default

Hi Alll,
How can I start the gcalctool in the scientific mode by defualt. Currenlty its getting started in Basic mode. I checked the man page for gcalctol but could not get much information from that
Thanks in advance
Bye
Pradeep

This forum is for discussion of Sun Studio, the program development environment for C, C++, and Fortran programming.
Your question is about a Gnome application. You are more likely to get an answer in a Gnome forum at gnu.org, or at opensolaris.org

How to start Weblogic 9.1 in verbose mode

Hi all,
I need to start Weblogic 9.1 in verbose mode.
We have just recently migrated from weblogic 8 sp3 to weblogic 9.1. In weblogic 8 sp3, the option
"-Dweblogic.ejb20.cmp.rdbms.codegen.verbose=true"
would work but it doesn't work with Weblogic 9.1.
Can anyone tell me how to do the same?
Thanks and regards,
Sachidanand

If you close Firefox while in full screen mode then Firefox should reopen in full screen mode the next time.
That choice is saved in the localstore.rdf file in the profile folder.
*http://kb.mozillazine.org/localstore.rdf

How to start iTunes in XP? "safe mode" produces: "A rental is being transferred..."

iTunes does not become visible. Task Manager shows it has started (in Processes). Trying "safe Mode" only comes up with the message:
"A rental is being transferred. If you quit now, the transfer will be cancelled. Are you sure you want to quit?"
and there is no "Continue" button. I'm trying to run itunes for the 1st time after installing it (from iTunesSetup.exe v.11.0.2.26). I'm not ready for any "rental".

Hello jjfirefox77
"C:\Program Files\Mozilla Firefox\firefox.exe" -safe-mode
thank you

How to Start iTunes with Windows Minimized?

I leave my iPod connected to my PC frequently, but every time I boot to Windows, my iPod screen stays lit and says "do not disconnect" until I start iTunes.
Problem is that if I put iTunes in my "Startup" folder, then it always boots with the iTunes window open, and not minimized in the tray. I even selected "minimze to tray" option, but there is no "boot with Windows" option.
Any suggestions?

Ok, first -- iTunes is dumb. It is the only application I know that ignores the intWindowStyle variable (the "2") in the script above.
Anyway, here is a workaround -- this starts iTunes, waits 6 seconds, then minimizes it. You can edit the time (in milliseconds) if this is too fast/slow.<pre>
Set WshShell = CreateObject("WScript.Shell")
WshShell.Run """C:\Program Files\iTunes\iTunes.exe""", 2
wscript.sleep 6000
strComputer = "."
Set objWMIService = GetObject("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2")
Set colProcessList = objWMIService.ExecQuery _
("Select * from Win32_Process Where Name = 'iTunes.exe'")
For Each objProcess in colProcessList
foobar = split (objProcess.Name, ".")
WshShell.AppActivate ( foobar(0) )
WshShell.SendKeys("%( )") '//equivalent of Alt+spacebar
WshShell.SendKeys("n") '//equivalent of n key
Next</pre>

Start Help Topic Window in Dock mode

I'm new to OHJ and converting a documentation from JavaHelp to Oracle Help Java.
I wonder how it is possible to open the Help Navigator together with the Topic Window docked? By default there is now Topic Window when oracle.java.Help is shown with "showNavigator". I would like to have it docked with an introduction page. How do I do that?
Thanks for any help!

The following error has nothing to do with running in debug mode?
It just means that there's another process already binded to port 8320
you might want to see the output of netstat -a
BTW, what flags you switched on to run the server in debug mode?
Kumar
"Mark" <[email protected]> wrote in message
news:3c951474$[email protected]..
>
Hi there
Any clues/suggestions are greatly appreciated.
Has anyone experienced any difficulties when starting weblogic in debugmode.
More specifically, it cannot start correctly because it thinks thatanother instance
is using the same port (definately not the case).
Error log follows:
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <Unableto create
a server socket for port: 8320. java.net.BindException: Address already inuse
Perhaps another process is using port 8320.> <Mar 18, 2002 7:42:32 AMGMT+10:00>
<Notice> <WebLogicServer> <SSLListenThread listening on port 8321> <Mar18, 2002
7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <The WebLogic Server isno
longer listening for connections. You should probably restart it.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <Servershutdown
has been requested by system> <Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert><WebLogicServer>
<The shutdown sequence has been initiated.> <Mar 18, 2002 7:42:32 AMGMT+10:00>
<Info> <WebLogicServer> <Server shutdown is commencing NOW and isirreversible.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Error> <Performance Pack> <Unable toload
performance pack, using Java I/O. java.lang.ThreadDeath atjava.lang.Thread.stop(Thread.java:581)
at weblogic.t3.srvr.T3Srvr.die(T3Srvr.java:764) atweblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:507)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171) atweblogic.Server.main(Server.java:35)
>
>

How to Install "Adobe Reader 11" in "Silent Mode"?

Hi,
how can i install adobe reader (AdbeRdr11000_de_DE.exe) in Silent (quiet) mode?
I already tried following parameters:
AdbeRdr11000_de_DE.exe /q /aAll /l /msi /norestart ALLUSERS=1 EULA_ACCEPT=YES
Unfortunatly without success.
Best Regards
Marco

I assume you are working from the enterprise install documents (I've never read them). You might find the Enterprise Deployment forum helpful: http://forums.adobe.com/community/acrobat/acrobat_enterprise_install

IPhone: How to tell if Phone is in Silent Mode

Is there any way to detect if the iphone has it's sound turned off? I can't find anything in the docs.

MUCH agreed.
I had an app on my Treo ("Show Off") -- http://www.hobbyistsoftware.com/show-off-more.php -- that remedied this issue. That app changed the background color across multiple apps...so you always knew whether your ringer was on or off. Another useful quality of this "background switching" was that I often had my ringer off at night before going to sleep, in a theatre, etc. -- all environments in which I actually preferred a dark background in order to spare those near me. So my "silent" theme was white text on a black background; and my "ringer on" was black text on a white background.
This kind of "theme switching" would be decidedly un-iPhone-like, but man, I loved that Treo app...!

Install Oracle8 client in silent mode under windows environment

I would like to know how can i install Oracle8 client in silent mode under windows
environment.
I would appreciate a prompt reply on this

I would like to know how can i install Oracle8 client in silent mode under windows
environment.
I would appreciate a prompt reply on this

How to install applications to remote machines in silent mode?

Hi All,
I have the following question and I hope to find a creative solution.
My applications architecture is a client server one.
I would like the server to remotely connect to its clients machines and silently install a client java application for 2 purposes:
1. Install new clients on computers that werent part of the deployment yet. When the server connects to a new clients he needs send the installation file and execute it
2. Updated existed clients (replace jars, configuration files, etc)
My main goal is to do everything in silent mode (without requiring the users to connect the clients and actively install clients application).
Can any of you think of a Java solution for this? I think the first purpose if the harder one so in case I ask my users to install the clients for the first time, how do I silently upgrade their applications when needed?
Tnx,
Uri

sabre150 wrote:
Scheiner wrote:
My concern with Webstart is that it open windows and require the user to do some steps. Like press one button to agree to an update!
Yes, but when you have 1000 clients it is a lot of work.
I would like to have the upgrade process to be done silently. It is this 'silent' requirement that is suspect. Anything silently installing something is dangerous. Are you one of these people who has Windows automatic updates turned on?
Personally, I am not. but it is good to have the option.
>>
Can webstart run in silent mode? I'm pretty sure it can but I can't be certain and I don't know how to do it since I won't ever use silent upgrades. Read the Webstart documentation.
I can have the server making the client application invoking the URL for the new files (so the user will not have to connect to every client machine and invoke the URL), but how do I do the rest in silent mode?
btw- I can use PsExec to run the installation on new clients (windows only). My main issue now is how to upgrade silently. If you have other ideas than webstart I will be happy to hear.

Start and stop windows service for multiple remote computers

Hello,
Can someone show me how to Start and Stop windows service for multiple remote computers using Command Prompt or PowerShell or even Java?
Thank you

You asked a pure Windows related question at a pure Java related forum. We have advised you to look for a Windows related forum to post the question. Nothing special. It's like asking a car mechanican to help you with your migraine, he would advise you to look for a general practitioner.
But why are you so surprised and negative about this answer after all? Don't we have to help you? Don't you appreciate help? So be it then, but please stay away then if you keep this attitude.

Starting SOA Suite server in debug mode

Hello,
anyone knows how to start soa suite server on debug mode?
it basically oc4j server started from opmn. is there anyway i can pass the "-ojvm -XXdebug,port4000,detached,quiet" to opmn?
Rudi

solved..!!!
http://download.oracle.com/docs/cd/B31017_01/web.1013/b28950/sysprops.htm#CHDCFADJ

How to start emctl in windows in silent mode.

Similar Messages

Maybe you are looking for