How to start/stop process flow from sql*plus?

Hi,
i know how to start a process flow via sqlplus_exec_template.sql, but i cannot find any information on how to stop (and rollback) a working flow from sql*plus. Any help would be appreciated.
Greetings
Christoph
Message was edited by:
ctrierweiler

Hi,
I've had a go.
How should I interpret the results of list_requests:
owner_owr@ORKDEV01> @list_requests
====================
DEPLOYMENTS
====================
Audit ID Status Name Date Owner
2706 READY Deployment Fri Nov 11-NOV-05 10:49:59 OWNER_OWR
11 10:46:37 CET 2
005
====================
DEPLOYMENT UNITS
====================
Audit ID Status Name Date Owner
2707 READY Unit0 11-NOV-05 10:49:59 OWNER_OWR
====================
EXECUTIONS
====================
Er zijn geen rijen geselecteerd.
owner_owr@ORKDEV01>
Whilst a process flow is executing the last query will list executions, all of which have status BUSY:
owner_owr@ORKDEV01> @list_requests
====================
DEPLOYMENTS
====================
Audit ID Status Name Date Owner
2706 READY Deployment Fri Nov 11-NOV-05 10:49:59 OWNER_OWR
11 10:46:37 CET 2
005
====================
DEPLOYMENT UNITS
====================
Audit ID Status Name Date Owner
2707 READY Unit0 11-NOV-05 10:49:59 OWNER_OWR
====================
EXECUTIONS
====================
Audit ID Status Name Date Owner
394512 BUSY PF_ONB01 04-MEI-06 09:11:12 OWNER_OWX
395328 BUSY ONB:FULL_PREPARE 04-MEI-06 09:11:55 OWNER_OWR
395324 BUSY PF_ONB01:ONB 04-MEI-06 09:11:55 OWNER_OWR
owner_owr@ORKDEV01>
As an aside, I will attempt to get rid of the READY deployment and deployment unit using deactive_deployment.sql
Now, if I attempt to use deactivate_execution.sql on any of the executions with status BUSY I get:
owner_owr@ORKDEV01> @deactivate_execution
Voer waarde voor 1 in: 396136
declare
FOUT in regel 1:
.ORA-20003: The object is not in a valid state for the requested operation
ORA-06512: at "OWNER_OWR.WB_RTI_EXCEPTIONS", line 94
ORA-06512: at "OWNER_OWR.WB_RTI_EXECUTION", line 774
ORA-06512: at "OWNER_OWR.WB_RT_EXECUTION", line 90
ORA-06512: at line 4
owner_owr@ORKDEV01>
So all the seems to remain is to use abort_exec_request.sql
This does the job, but the script itself hangs.
I think it has to do with the l_stream_id not being checked again after the initial IF. I think it should probably be part of the loop condition as it is again reset in the do_acks inside the loop.
Cheers & thanks,
Colin

Similar Messages

How do I stop cover flow from rotating????

How do I stop cover flow from rotating, I have switched it off but it still rotates.
Phil

Any idea why that is?
Probably because it is a visually oriented feature that requires the full width of the screen to show the prior & next albums in the right/left "flow" at a useful resolution on the small screen. I suppose it could be reworked for a top/bottom flow but that would require something other than the rotation of the Nano itself to invoke. Apple's engineers probably thought that would be a needless complication.

How to run O/S command from SQL * Plus.

Hi,
Can i run O/S commands, say copy or move, from SQL * Plus prompt? If yes, what is the command.
Thanks.

hi,
or you can try the following
slq > !
and then your command
rgds
Alan

How to insert data which contains '&' from SQL*Plus without asking prompt

Hi,
I want to insert data in table from SQL*Plus but data value contains '&' as given in below example(insert script).
There are 10000 rows. When I load from SQL*Plus it is asking for 'value for :P'.
I dont want to replace '&' with 'and' also there should not be prompt for asking value for :P.
Example
Insert into CS_Tracker (TrackId,FeedBack) values ('ARARGE034678','S&P');
Insert into CS_Tracker (TrackId,FeedBack) values ('ARARGE034676','S&F');
Insert into CS_Tracker (TrackId,FeedBack) values ('ARARGE034677','A&P');
Can anyone help me in above issue.
Thanking in Advance
Sanjeev

use
set define offbeforehand

How to view a stored procedure from sql plus

Can anyone please tell what is the command for viewing the content of the stored procedure from sql plus ?
Thanks

Hi,
I use this simple script to retrieve.......
EDTRAD@T_E_S_9-->l
1 select text from all_source where name = 'GET_MAN' -- proc name here
2* order by line asc
EDTRAD@T_E_S_9-->/
TEXT
FUNCTION get_man (in_man SSBOSS.CLNTWORK.manager%type)
RETURN varchar2 IS
CURSOR get_man(in_man SSBOSS.CLNTWORK.manager%type) IS
SELECT name
FROM ssboss.clntwork
WHERE agency = 'TM'
AND manager = in_man
AND manager is not null
AND manager != '**OB**';
v_man SSBOSS.CLNTWORK.name%type := null;
BEGIN
OPEN get_man(in_man);
FETCH get_man INTO v_man;
IF get_man%notfound THEN
v_man := 'Manager Not Found !';
RETURN (v_man);
CLOSE get_man;
END IF;
RETURN (v_man);
CLOSE get_man;
END;
21 rows selected.
EDTRAD@T_E_S_9-->

How to call OWB Process Flow from APEX?

Hello.
I was wondering if there is a way that I can have a OWB process flow kick off from a button in APEX? I know you can have APEX perform PL/SQL upon being clicked, so I am wondering if there is a way that I can do the same for a process flow? We are looking to have a manual kick off for a job and we are trying to use APEX for this. Any information would be great!
Thank you

Hi,
Using SOAP ?if there is a way ... please provide some examples.
I finished my EDQ process, and now i am trying to find how to call it from APEX
My web service WSDL is
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header/>
<soap:Body>
    <dn:request xmlns:dn="http://www.datanomic.com/ws" id="?">
      <dn:record>
        <dn:ID>?</dn:ID>
      </dn:record>
    </dn:request>
</soap:Body>
</soap:Envelope>You did not state your Apex version. If you are on 4.x then see
Creating a Web Service Reference Based on a WSDL
Cheers,

How to start BPM process WSDL from WDA

Hello,
I need to start BPM Process from SRM ECC with WDA; i have been through this link ;
http://forums.sdn.sap.com/thread.jspa?threadID=1643425
also followed the pdf named 'Triggering NetWeaver BPM Process from ABAP' provided from SAP but still stuck on some issues;
- I have a WSDL in order to start BPM process and works fine as i successfully call it from EP Java AS with WDJ..
- What i need to do is to trigg it from SRM Screens so i need to call this WSD from ECC, so;
When i try to create a consumer proxy using external wsdl option, after putting in WSDL Url it throws an error;
Exception occurred in communication framework:Error in HTTP Framework:405 Method Not Allowed http://xxx.local:50000/bpm/de
mosapcom/dccategoryappbpm/StartCatAppSI
Exception of class CX_SLIB_HTTP_FAIL
And this is error from BPM Logs for the same action;
process()
[EXCEPTION]
com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException: com.sap.engine.services.webservices.espbase.server.additions.wsa.WSAddressingException: com.sap.SOA.wsr.030104 - Expected request method POST. Found GET.
at com.sap.engine.services.webservices.espbase.server.additions.SOAPHTTPTransportBinding.getAction(SOAPHTTPTransportBinding.java:581)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.overwriteConfiguration(RuntimeProcessingEnvironment.java:894)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.preProcess(RuntimeProcessingEnvironment.java:469)
Also i found this link : http://wiki.sdn.sap.com/wiki/display/TechTSG/(WSR)Problems-P06/
But no help so far,
So, is there anyone faced similar or the same issue? Any suggestion will be appreciated.
Regards,
Yasin

Hi soujanya,
BPM server is not open to the internet but only intranet, so i will copy the WSDL code for you,
will be glad if you can help;
- <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://www.koczer.com/StartCatAppSI/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="StartCatAppSI" targetNamespace="http://www.koczer.com/StartCatAppSI/">
- <wsdl:types>
- <xsd:schema targetNamespace="http://www.koczer.com/StartCatAppSI/">
- <xsd:complexType name="DetailsType">
- <xsd:sequence>
<xsd:element name="Category_ID" type="xsd:int" />
<xsd:element name="Category_Text" type="xsd:string" />
<xsd:element name="User" type="xsd:string" />
<xsd:element name="Manager" type="xsd:string" />
</xsd:sequence>
</xsd:complexType>
- <xsd:element name="NewOperation">
- <xsd:complexType>
- <xsd:sequence>
<xsd:element name="Details" type="tns:DetailsType" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
- <wsdl:message name="NewOperationRequest">
<wsdl:part element="tns:NewOperation" name="parameters" />
</wsdl:message>
- <wsdl:portType name="StartCatAppSI">
- <wsdl:operation name="NewOperation">
<wsdl:input message="tns:NewOperationRequest" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="StartCatAppSISOAP" type="tns:StartCatAppSI">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="NewOperation">
<soap:operation soapAction="http://www.koczer.com/StartCatAppSI/NewOperation" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="StartCatAppSI">
- <wsdl:port binding="tns:StartCatAppSISOAP" name="StartCatAppSISOAP">
<soap:address location="http://zerbpmts.koczer.local:50000/bpm/demosapcom/dccategoryappbpm/StartCatAppSI" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

HOW TO START MAKING DATABASE USING ORACLE SQL PLUS in 10g?

how will i create database using sql plus?
does the code of sql applicable to it..?
do i have to use the "create db <database name>", use and " create table also,.."
pls help me..
thanks

At dos prompt :
C:\>set ORACLE_SID=<your SID>
C:\>sqlplus / as sysdba
you get connected as sys user. Don't use this connection to create your own objects, create users instead.... but it would be useful to read some documentation, for example Starting SQL*Plus and manuals mentioned there.

Windows service does not stop when DB is shutdown from SQL*Plus

I have a 11g XE DB in a Windows 7 machine.
The installation has created a Windows service called OracleServiceXE. It's status is STARTED.
I then login to SQLPLUS as sysdba and do a shutdown immediate;
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
Problem is, when I refresh the services, the OracleServiceXE is still showing as STARTED.
If I use the listener control to stop the listener the Windows service OracleXETNSListener changes status to BLANK.
Why is this?

tvCa-Oracle wrote:
That service is a prerequisite Windows service to be able to start the database, but it is not the status of the database itself.
When you do start the database, he may or may not start the service automatically (not sure there), but it is a needed service, for each database SID, on Windows.
If you want to know what it is, open Task Manager or Process Explorer, only start the service (not the database), and see which OS process is launched.
AFAIK, this is only on Windows, there's no comparable component on Linux/Unix for this.
The Windows service OracleServiceXE has c:\app\oracle\product\11.2.0\server\bin\ORACLE.EXE XE as the Parth to executable.
If I click on the Services tab in Task manager, then right-click the OracleServiceXE and click Go to process, it show the oracle.exe in the processes tab.
If stop it, the service, from the Windows service control, the oracle.exe disappears and we cannot login to the DB.
If we start the service from the windows service control, the oradim.exe appears, then a second later the oracle.exe appears. Once the DB status of the Windows service is STARTED, the oradim.exe disappears.
So, I can start and stop the oracle DB with the Windows service. But If I stop the DB from sql*plus the the service is not stopped....

How to Start/Stop from Server Manager

Hello,
I am trying to figure out how to start/stop/restart my coldfusion servers from server manager. I have seen the instruction at this link:
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSfd7453be0f56bba4-2a6b48f122a6582c7f-7ff e.html
However it mentions "place the jrunappstartup.war file under the directory <CF_Home>/runtime/servers/admin"
I do not know where to get this file from. Please help!
I am running ColdFusion standalone.
Any help is much appreciated,
Thanks,
David

An update to eariler posting. Configure CF9 Enterprise multiserver.
Likewise unable to find jrunappstartup.war file mentioned.
If I follow the instructions and try configure the SM Start Stop Details the Start Stop Restart
does not become an highlighted option.
Here are a couple screen cuts for interested readers-
Start Stop Details (are these correct Jrun items to fill in?):
Unable to restart from SM:
Regards, Carl.

HT1379 How do I stop a program from opening at start up(iPhoto)?

How do I stop a program from opening at start up? (iPhoto)
Also, my mac recently shuts down completely while in sleep mode. Any reason why this happens?

If the app is opened when you shut down the Mac, untick Restore windows when logging back in. Open System Preferences > Users and Groups > Login Items and delete iPhoto

How do I stop extra tabs from open on start up?

How do I stop extra tabs from open on start up? When I save new tabs the next time I open I have the new saved tabs. On the next opening after that are the same 7 tabs I don't want and didn't save. edit

Make sure that the pages aren't set as multiple home page, see
* [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols
See also:
* http://kb.mozillazine.org/Preferences_not_saved
If you use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.
* http://kb.mozillazine.org/Session_Restore

How can I stop the program from going through all of the text previously put in. It is making the process very slow.

How can I stop the program from going through all of the text previously put in. It is making the process very slow.

while True:
and just indent everything else under it
Ends when you press ^C.
if you wish to have a way to break out of the loop, say, when you press enter at the VPC number without entering anything, add the following after your vpc input:
if not vpc:
break
which will break out of the while loop and end your program.
Last edited by buttons (2007-12-14 22:03:06)

How can I stop power point from opening each time my Macbook Pro starts?

How can I stop power point from opening each time my Macbook Pro starts?

Remove it from the list in Startup Items (System Preferences).

How can i stop my mbp from starting up in target disk mode

how can i stop my mbp from starting up in target disk mode

It should only do that if you hold down the T key at startup. Otherwise the PRAM battery is probably near death, or the T key needs to be cleaned so it doesn't think it is being held down. To clean the keyboard properly, you will probably need to bring it in for service.

How to start/stop process flow from sql*plus?

Similar Messages

Maybe you are looking for