How to stop outbound IDOC in PI without error

Hi,
The scenario is Idoc - JDBC and personID is unique field in database.
Now the requirement is, in some cases personID generated after certain process or I can say in some cases personID is not present when this interface runs.
Now I need to stop outbound Idoc in PI system (without any error) if perosnID is not present. Means I dont want to send any data to database if personID is not present. Is there any way to accomplish this task?
Regards,
Chintan

Hi All,
Thanks for replying with very useful information and answers, really appreciated.
I am able to solve this issue by using Node Function at Message Type level. I created following condition at message type level.
personID -> removecontext -> Equals -> 0001 -> removeContext -> createIf -> receiver MT
Here i've to use removeContext two times because the segment which contains personID field is repeated many times so I've to check in each segment.
If this condition fails (if personID is not present ) then the target message structure is not going to be created.
Thank you once again.
Regards
Chintan

Similar Messages

How to Reprocess Outbound Idocs in Status 02 (Errors)

Hi,
    I have an urgent problem. How do I re-process an Outbound IDoc in Status '02' (Error Passing Data to Port)
    I have tried reprocessing this IDoc through BD87 using both the options Edit>Process and Edit>Restrict and Process, but it doesn't work
     Please help as we are migrating cutover data from SAP to another system
Regards,
Aditya

Worth to have a look at this thread
Error handling problem with outbound idoc status 02 and XML HTTP Port
Regards
Vivek
Reward points for all the useful answers

Reg: How to Stop Polling of JDBC Adapter without Scheduling the adapter

Dear Gurus,
Here I am having one requirement. My clients wants to send data from JDBC adapter (ORcale System table) to R3 system via RFC.
His Requirement::
1. He is not telling the time of data flow from Oracle server so that based on that we can schedule the adapter in the Communication Channel monitoring (Availablitiy Time Planning) or Else we can Schedule by deciding the setting of the polling interval time.
2. He is telling that When ever he waants to send the data he will place one dummy file in the File Adapter FTP location so that it will became an Indication for u to poll the jdbc adapter and to transfer the data to R3.
3. Untill he keeps the file or gives indication he doesn;t want to communicate with Oracle server due to some security and it s a most important data base he doesn't want to disturb that Oracle Server as so many business are running on that.....
We Proposed::
1. Atleast you need to tell the scheduling time or poll interval time so that we can schedule our adapter.
but he s not accepting for this
2. Atleast U need to give access for Data base to enter one more extra field like STATUS CODE so that we will add one number and we keep on Update in the Update table and based on that Update table statement it will poll.
but he s not even accepting for this
3. Finally we prposed that to create another table in the Oracle SYstem as Dulplicate Table which is similar to Standard Orginal table when ever he wants to pick the data please keep that data in this Duplicate TABle so that JDBC adapter will pick the data from thsi TABLE instead of picking the data from that standard table so that it will not effect any standard table data in the table.
but he s not even accepting for this
We have done some R & D:::
1. WE approached even through BPM and via switch conditions is one scenario
   FILE RECEIVE >SWITCH CONDITION> RECEIVE AND SEND or else EXIT
2. Using correlation in anotehr scenario means correlating File adapter and JDBC and based on one dynamica value it will goes to SEND STEP ( RECE IVE --> RECEIVE --> SEND STEPS )
Even though we know this...concept that...we jsut tried::
In BPM we can control the flow in XI 3.0 but we cannot Stop the Polling of JDBC adapter at backend because one the data comes from FILE adapter it will keep on HOLD untill it receives the JDBC from Oracle then based on the condition or Correlation it will goes futher SEND step means after that file adapter is picking file or not ...what ever it may be JDBC will polls at backend and brings that data to BPM"
Hence sugest me How to Stop Polling of JDBC Adapter without Scheduling the adapter or else using STATUS CODE Update statements in JDBC Tables
Regards:
Amar Srinivas Eli

Hi! All,
Finally I decided to do the scenario in two steps:
1: FILE REQ --> JDBC REQ -->JDBC RES --> FILE RECV
2: FILE RECV --> RFC
But I am getting issue while doing first scenario
Desgn :
I have created 2 Synchronous interfaces :
1) FILE 2 JDBC REQ
In this a) out put message is FILE Req
          b) Input msage:; FILE RES
2} JDBC2FILE RECV
        a) Output mesage;; JDBC REQ
        b) Input Msge :: JDBC Response
Mappings:
1) File REQ-->JDBC REQ
2) JDBC RES-->FILE RES
Interface mappings:
1: FILE 2 JDBC REQ--> JDBC 2 FLE RECV
CONFIGURATION ::
1: One Seder File CC
2: Two reciever CC's one is for JDBC RECEIVER and other s FILE RECEIVER
3; One Sender Agreement
4: 2 Recver agreements
5: One Interface Determination and
6: One RECCV Determination
My Question;;
1. First let confirm whether my development steps are right or not ?
2: Another thing s I am not sure reg Configuration Steps means
whetehr one interface determination and one Receiver Determinations are required or not as these are synchronous Interfaces
3: main Issue is::::
If my scenario s FILE2RFC2FILE then I will get RFC response automatically but here issue is this is JDBC
My reqquirement is By sending one Field from fILE to JDBC REQ it needs to send entire TAbLE records as a Response to file as XML
without having Sender JDBC how can I send the JDBC Res to FILE and If that is the case then again JDBC adapter is polling which is contradict to the client requuirement which i explained above.
pleas suggest me the Detailed steps mainly Colloboration agreements and logical routings and
also explain in detail if i can go for BPM
Also give cleear blogs but before giving make sure that it contains detailed screen shots because aIready gone thorugh
Scenario File-JDBC-RFC
File<-->JDBC Sync coomunication.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
Regards::
Amar Srinivas Eli

How to generate Outbound idoc for Material Reservation

Hi Experts,
I want to send outbound IDoc when a material reservation is created with tcode MB21.
I have been working on this issue and finding the solution in SCN for a week...
I found some messages similar to this but I could not find out the correct way how to do that.
At this moment, I configured BD64/WE20 referring the following topic which seems to be feasible solution but could not find any outbound IDocs created, unfortunately.
Implement ALE_RESERVATION_CREATE
I appreciate if someone can help me how to create outbound IDoc with MB21 or advice some possibility of missing configuration or steps.
Best Regards,
Kenji

Hi;
Have been able to find the solution to create the IDoc MRESCR after entering a reservation?
I am in the same situation and I do not see the IDoc output in the BD87.
It would be nice if you share the solution.
Thanks in advance

How to update the status of Outbound IDOC in case of error

I want to know about how to update the status of Outbound IDOC in case of error.
I am using message control functionality here.

HI,
If u r using the standard message and basic type
u can do it in the FM attached to the basic and message type.There u need to write ur own message instead of standard SAP message..chek if there r any userexits available in the FM..where u can overwrite ur own message ..
If u r using the Zmessage and Zbasic type
then u need to declare an internal table of EDIDS structure and then append ur message to the internal table..
idoc_status-docnum   = idoc_contrl-docnum.
idoc_status-msgty    = <message type>
idoc_status-msgid    = message-id.
idoc_status-msgno    = message-number.
idoc_status-msgv1    = message-message_v1.
idoc_status-repid    = sy-repid.
idoc_status-status   = <give the error status>.
APPEND idoc_status.
Reward if u find useful
Regards,
Nagaraj

How to debug Outbound IDoc

Hi Friends,
I want to know how to debug Outbound IDoc .
is there is any tool for debugging outbound idocs
Thanks,
Bhaskar.

hi
Go to tcode WE19. Give idoc number press F8. You will get next screen. There you have push button in tool bar called "INBOUND FUNCTION MOUDLE". Click on it. You will get one pop-up screen.
There give function module name and tick the check box called " Call in debugging mode" and select radio button called "In foreground". Then press ok. It will take you to debugging mode.
Reward if it dose.
Thanks
Siva kumar

How to stop an idoc from being processed further

Hi Experts,
I have a requirement where i have to stop the idoc from being processed in an user exit.
I have to stop the idoc and give a suitable status message over there.
It would be highly helpful if anybody tells me how to stop the idoc abruptly and giv the status messsage.
Thanks in advance.
Praveen.

Hi,
Check the below link
https://forums.sdn.sap.com/click.jspa?searchID=11810720&messageID=3032674
You need to find aproper EXIT.
The avaliable options for you in the exit is
IDOC_DATA
Now if i pick the segment having shiped qty from the data record and check the same with the delivery qty your objective is half done.
When the condition fails you need to update the IDOC with Error 51 saying that this is not possible .
for that you need to bring your logic as
LOOP AT IDOC_CONTROL.
PERFORM LOGIC...
ENDLOOP.
FOR LOGIC .
All the criteria and then update the status of the IDOC then error is generated and updated to the IDOc.
PERFORM updatestatusidoc.
endform logic.
like this in
form updatestatusidoc.
IF subrc = 0 .
t_idoc_status-docnum = f_idoc_contrl-docnum.
t_idoc_status-status = c_idoc_status_ok.
t_idoc_status-msgty = 'S'. -
>denotes success
t_idoc_status-msgid = 'ZXXX'.
t_idoc_status-msgno = '000'. "
t_idoc_status-msgv1 = itab-field.
APPEND t_idoc_status.
ELSEIF subrc = 1.
t_idoc_status-docnum = f_idoc_contrl-docnum.
t_idoc_status-status = c_idoc_status_error.
t_idoc_status-msgty = 'E'. "denotes --->error
t_idoc_status-msgid = 'ZXXX'.
t_idoc_status-msgno = '001'. "
t_idoc_status-msgv1 = itab-field.
APPEND t_idoc_status.
endif.
endform.
this has to be done to make the idoc to trigger error mode.
Regards,
Raj.

How do you run a .sh file without errors?

Hi. For any of you who are familiar with the game Minecraft, I'm trying to start making my own mods using Minecraft Forge Source. However, in the installation instructions, it says I have to run the install.sh file. But whenever I run it in Terminal, here's all that comes out in the Terminal window:
*******-MacBook-Pro:~ *******$ /Users/*******/Downloads/forge/install.sh ; exit;python: can't open file 'install.py': [Errno 2] No such file or directory
logout
[Process completed]
Could somebody tell me how to properly run the .sh file without errors? Any help that anyone gives will be appreciated. Thanks.

You can try Crossover.
It isn't free, but it lets you run most common windows apps without having to buy windows. (it only works on intel macs).
Good luck!

How to debug outbound Idoc function module for invoice

I have to debug the outbound IDOC function module and UserExit for invoice message type INVOIC, process code SD09, function module is IDOC_OUTPUT_INVOIC and user exit for the function module LVEDF001.
I tried putting the break point in function module IDOC_OUTPUT_INVOIC and recreate the IDOC using WE19 but it creates the idoc but does not stop at the break point. I have also tried generation of idoc through VF02. It again creates the idoc but does not stop at the function module.
Please let me know if I am missing any thing and not doing it right.
Appreciate your help.
Rohit

Hi Ali,
I faced the same problem. Thing is the break point is not getting triggered when i ran tha IDOC through WE19.
What i have done is i created a project for my exit in CMOD and kept some junk code in the exit and executed it through BD21. Then the Break point got triggered. See if it works.
Regards,
Uday S.

How to send Outbound IDocs through an RFC-enabled FM

Good day to all;
A partner system (AS/400) wants to use a Java Connection to execute a RFC Function Module, in SAP, that will then return a collection of IDocs.
Currently, the Function Module builds the IDocs, but I'm not exactly sure how to simply send those IDocs back to the AS/400.
If anyone can help in this regard, that would be great.
My current thoughts are to use Master_IDoc_Distribute, but then I imagine that requires a port configuration for the AS/400. And if this is the case, does that mean that SAP will send the IDocs back itself instead of using the RFC interface?

Hi Tavares,
If you want to send outbound IDoc to AS/400 (external system), you need to setup file port (t/code WE21).
For RFC interface, you need to setup RFC file port with RFC Destination (t/code SM59). In this case, SAP will send IDoc (individually or batch) to receiver system (AS/400). Perhaps you need a middleware for data transformation, if AS/400 does not perform data mapping for outbound IDoc.
For FTP interface, you need to setup flat/XML file port for outbound. then you can FTP the file to AS/400 later on.
In addition to file port configuration, you also need to setup partner profile for outbound parameter (t/code WE20) and the distribution model (t/code BD64).
Hope this will help.
Regards,
Ferry Lianto

How to find Outbound Idoc number from inbound Idoc number.

Hi,
I have one inbound Idoc in my system, then
How to find the idoc number from the system which sends that idoc(Outbound Idoc number).

Hello
You can use fm SREL_GET_NEXT_NEIGHBORS for this purpose.
Scenario: An EDI purchase order is received by SAP-XI and forwarded as Inbound ORDERS IDoc to R/3. SAP-XI generates an (outbound) IDoc number which differs from the (inbound) ORDERS05 IDoc in the R/3 system.
Calling fm SREL_GET_NEXT_NEIGHBORS with the following parameters:
OBJECT-OBJKEY = <IDoc number, 16-digits>
OBJECT-OBJTYPE = 'IDOC'
MAX_HOPS = '99'            " <<< get all links
I get the following result:
0000000000133906                                   IDOC       CUSTOMER   OUTIDOC
0000000000407402                                   IDOC                  INIDOC
000000370383                                       BUS2012    CUSTOMER   OUTBELEG
0010057944                                         BUS2032               INBELEG
Outbound IDoc number
Inbound IDoc number (ORDERS05)
PO number
Sales order (created from inbound ORDERS IDoc)
Regards
Uwe

How to trigger outbound IDOC when data changed in BP through Inbound IDOC.

Hi,
    In our system whenever we create a new Business Partner, these data is send across to SAP R/3 (as BDOC) and to Mainframe system (as outbound IDOC). Whenever we change any Business Partner record the data is send across to SAP R/3 (BDOC) and to Mainframe system (as outbound IDOC).
    This functionality is working fine.
    Currently we are getting a value for one standard field (Customer_Group3) of Business Partner as an inbound IDOC. The value of the inbound IDOC is reflecting in the field (Customer_Group3) in Business Partner Transaction. Once the inbound IDOC is received, the modified value is send across to SAP R/3 as BDOC. But the modified value is not send across to Mainframe system (outbound IDOC). The outbound IDOC is not getting triggered.
Kindly help

Is your mainframe system configured as Site in SMOEAC. If so are you using XIF Adapter.

How to stop receiving "AdobePremiereElements.exe - No Disk" error message at start-up

I upgraded from Premiere Elements 9 to 13 at Adobe. Install went without error, but each time I call up the program a window pops up entitled "AdobePremiereElements.exe - No Disk" with the following text within the window: "There is no disk in the device. Please insert a disk into drive \Drive\Harddisk1\DR1." I can eventually get this window to remove after repeated attempts, and the program seems to be running fine. Would appreciate knowing how to stop such nonsense and remove the annoyance. Thanks.

jimp
Thanks for the good news that the OldFilm.AEX file is gone and no more No Disc error message.
To update 13 to 13.1, you need to use an opened project's Help Menu/Updates.
Have you done that, and the message was that you were up to date already?
To check what version you have
Premiere Elements Editor. Help Menu/About Adobe Premiere Elements. The screen that then displays should show 13.1 if updated from 13 to 13.1.
That Help Menu/Updates location should let you take are of the Elements Organizer updating from 13 to 13.1.
Nonetheless, you can check on Elements Organizer Help Menu/Adobe Elements Organizer to assure that the screen that displays shows 13.1 instead of 13.
Any questions, please let me know.
Best wishes
ATR

How to stop the IDOC adapter using IDPI framework (APIs)?

Hi Guys,
We have a requirement to start/stop the communication channels depending on the Integration scenarios. But for IDOC and HTTP we dont have any sender channels.
Plz let me how can we stop the adapter ,so that no more IDOCs are received .
We are looking for some API (IDPI framework) if available.
Locking the RFC users is not an acceptable soln here.
Hope to get some info soon.
Regards
Dhanya

Hi Dhanya,
there is a way on PI side alone
for IDOC 2 steps needed:
1st: Determine all the IDoc metadata that is involved in your communication in IDX2 (basically all idoc types that the sending system sends) then deleted it all
2nd: Determine the IDoc port of the sending system in IDX1 (it should be an RFC destination pointing to the sending system) then Disable or delete that port
On runtime a validation of the loaded idoc metadata happens on PI and the sending side (experienced this on ERP6 & ERP5, not sure on lower versions >4.5), if the sending system determines that there is an inconsistency between its idoc structure against the idoc structure loaded in PI the idoc will be stuck in trfc queue (SM58) having error something like table EDI*** conflicts. In our case when you disable the IDoc port in IDX1 and there is no idoc metadata in IDX2 when the sending system tries to send idoc PI will try to fetch the idoc metadata but it won't be successful because the IDX1 port is disabled already.
for HTTP, you can try to disable service /sap/xi/adapter_plain in SICF but please consider the resending of the message should be handled also on the sending side.
hope this helps

How to create outbound idoc?

Hi Experts,
I want to know , how to create the oubound idocs.What is the procedure ? I sit gets generated on the application server.
Regards,
Rahul.

Hi,
Check this link...
https://wiki.sdn.sap.com/wiki/display/ABAP/Outbound%20Idoc%20Through%20ALE
Regards,
Raj.

How to stop outbound IDOC in PI without error

Similar Messages

Maybe you are looking for