How to Reprocess Outbound Idocs in Status 02 (Errors)

Hi,
    I have an urgent problem. How do I re-process an Outbound IDoc in Status '02' (Error Passing Data to Port)
    I have tried reprocessing this IDoc through BD87 using both the options Edit>Process and Edit>Restrict and Process, but it doesn't work
     Please help as we are migrating cutover data from SAP to another system
Regards,
Aditya

Worth to have a look at this thread
Error handling problem with outbound idoc status 02 and XML HTTP Port
Regards
Vivek
Reward points for all the useful answers

Similar Messages

STPPOD Idoc creation status : Error in ALE Service

Experts,
I am trying to send GR from MM to SUS in MM-SUS Classic Scenario on ECC 6.0 Server. I have also configured Goods REceipt Notifications Functionality to sending GR from MM to SUS.
When i am trying to send GR Idoc is generated (STDPOD) but i am getting the Error whose status - 29 in WE02 t-code :
Status Message for Selected IDoc
Status Text:   IDoc: 0000000000211243 Status: Error in ALE service
T100 Text:     Entry in outbound table not found
While i have properly configured Partner Profile for Message Type STPPOD :
Partner Role          Basic Type     Receiver Port           Application     Output Mode
LS        DELVRY03      A000000018 (XI port)           GRN               Transfer Idoc Immediately
When i try WE19 t-code for this idoc, i found the error "Port '' does not exist in the table of port descriptions"
while i have already defined port (A000000018)in WE21 t-code and this port also working fine for other messages.
Please suggest.
Thanks.
Regards,
Pawan Keshwani

Nikhil,
Issue is resolved it was the wiered error. As i removed LS from the field Partner Role in STPPOD message at partner profile(WE20) for SUS Client in ECC. Now the message STPPOD outbound message working fine.
Thanks.
Regards,
Pawan Keshwani

How to cancel an idoc in status 64

How to cancel an idoc in status 64

Hi Manju,
If you have table updation access then
Go to SE16 --> Table EDIDC --> Give your "IDoc number" --> change the status from 64 to "73 IDoc archived".
Or you can ask to your ABAPer to do that.
Hope it helps,
Regards,
MT

How to generate Outbound idoc for Material Reservation

Hi Experts,
I want to send outbound IDoc when a material reservation is created with tcode MB21.
I have been working on this issue and finding the solution in SCN for a week...
I found some messages similar to this but I could not find out the correct way how to do that.
At this moment, I configured BD64/WE20 referring the following topic which seems to be feasible solution but could not find any outbound IDocs created, unfortunately.
Implement ALE_RESERVATION_CREATE
I appreciate if someone can help me how to create outbound IDoc with MB21 or advice some possibility of missing configuration or steps.
Best Regards,
Kenji

Hi;
Have been able to find the solution to create the IDoc MRESCR after entering a reservation?
I am in the same situation and I do not see the IDoc output in the BD87.
It would be nice if you share the solution.
Thanks in advance

How to debug Outbound IDoc

Hi Friends,
I want to know how to debug Outbound IDoc .
is there is any tool for debugging outbound idocs
Thanks,
Bhaskar.

hi
Go to tcode WE19. Give idoc number press F8. You will get next screen. There you have push button in tool bar called "INBOUND FUNCTION MOUDLE". Click on it. You will get one pop-up screen.
There give function module name and tick the check box called " Call in debugging mode" and select radio button called "In foreground". Then press ok. It will take you to debugging mode.
Reward if it dose.
Thanks
Siva kumar

Outbound Idoc 03 status - SM58 error

Hi ,
For Oubound Idoc, I am getting Idoc with status 03 but is not there in Receipient system.
When I check Idoc in Sm58, Idoc has error <b>"The ABAP/4 Open SQL array insert results in duplicate database records".</b>
Can anybody help me how to solve this issue?
Thanks & regards,
Yogita

use FM idoc_status_write_to_database to change the IDoc status from 03 to 30 and then run WE14 or RSEOUT00 to change the status back to 03
resending idoc from status 03 ...is a data duplicatino issue on receiving side...why do u need to do that ?
Use WE19 tcode to debug
In we19
1)U can choose your Idoc number in existing Idoc textbox
2)Press execute
3)u will display ur Idoc struct
4)Dbl click on any field then u can modify its content
5)PressStd Outbound Processing Btn to process modified Idoc
Thats it

How to stop outbound IDOC in PI without error

Hi,
The scenario is Idoc - JDBC and personID is unique field in database.
Now the requirement is, in some cases personID generated after certain process or I can say in some cases personID is not present when this interface runs.
Now I need to stop outbound Idoc in PI system (without any error) if perosnID is not present. Means I dont want to send any data to database if personID is not present. Is there any way to accomplish this task?
Regards,
Chintan

Hi All,
Thanks for replying with very useful information and answers, really appreciated.
I am able to solve this issue by using Node Function at Message Type level. I created following condition at message type level.
personID -> removecontext -> Equals -> 0001 -> removeContext -> createIf -> receiver MT
Here i've to use removeContext two times because the segment which contains personID field is repeated many times so I've to check in each segment.
If this condition fails (if personID is not present ) then the target message structure is not going to be created.
Thank you once again.
Regards
Chintan

How to edit inbound idoc with data errors in multiple segments and reproces

Hi friends,
i have a requirement for error handling of inbound sales order(ORDERS04) without using WORKFLOW and WE19.
i have seen some function modules like edic_* ..
but my doubt is how to edit the error data(how can i identify the particular error fileds in the segments)and how to reprocess the same idoc.
Please help me...
Thanks in advance

Hi Narasimh,
Please find the following steps to edit IDOC segment after you find the error using WE02.
The example codes can be found in website
http://www.sapgenie.com/sapedi/idoc_abap.htm
STEP 1 - Open document to edit
CALL FUNCTION 'EDI_DOCUMENT_OPEN_FOR_EDIT'
       EXPORTING
            document_number               = t_docnum
       IMPORTING
            idoc_control                  = itab_edidc
       TABLES
            idoc_data                     = itab_edidd
       EXCEPTIONS
            document_foreign_lock         = 1
            document_not_exist            = 2
            document_not_open             = 3
            status_is_unable_for_changing = 4
            OTHERS                        = 5.
STEP 2 - Loop at itab_edidd and change data
LOOP AT itab_edidd WHERE segnam = 'E1EDKA1'.
e1edka1 = itab_edidd-sdata.
IF e1edka1-parvw = 'LF'.
    e1edka1-partn = t_eikto.
    itab_edidd-sdata = e1edka1.
    MODIFY itab_edidd.
    EXIT.
ENDIF.
ENDLOOP.
STEP 3 - Change data segments
CALL FUNCTION 'EDI_CHANGE_DATA_SEGMENTS'
           TABLES
                idoc_changed_data_range = itab_edidd
           EXCEPTIONS
                idoc_not_open           = 1
                data_record_not_exist   = 2
                 OTHERS                  = 3.
STEP 3a - Change control record
CALL FUNCTION 'EDI_CHANGE_CONTROL_RECORD'
       EXPORTING
            idoc_changed_control         = itab_edidc
       EXCEPTIONS
            idoc_not_open                = 1
            direction_change_not_allowed = 2
            OTHERS                       = 3.
STEP 4 - Close Idoc
Update IDoc status
CLEAR t_itab_edids40.
t_itab_edids40-docnum      = t_docnum.
t_itab_edids40-status      = '51'.
t_itab_edids40-repid       = sy-repid.
t_itab_edids40-tabnam      = 'EDI_DS'.
t_itab_edids40-mandt       = sy-mandt.
t_itab_edids40-stamqu      = 'SAP'.
t_itab_edids40-stamid      = 'B1'.
t_itab_edids40-stamno      = '999'.
t_itab_edids40-stapa1      = 'Sold to changed to '.
t_itab_edids40-stapa2      = t_new_kunnr.
t_itab_edids40-logdat      = sy-datum.
t_itab_edids40-logtim      = sy-uzeit.
APPEND t_itab_edids40.
CALL FUNCTION 'EDI_DOCUMENT_CLOSE_EDIT'
       EXPORTING
            document_number = t_docnum
            do_commit        = 'X'
            do_update        = 'X'
            write_all_status = 'X'
       TABLES
            status_records   = t_itab_edids40
       EXCEPTIONS
            idoc_not_open    = 1
            db_error         = 2
            OTHERS           = 3.
Hope this will help.
Regards,
Ferry Lianto

Outbound IDOC in status 12

Hi all,
We have posted outbound IDOC from SAP R3 system to the middleware. Middleware system has received all the IDOC except few(2) idocs and in the very next day again they confirmed that they have not received 3 idocs.
missing idocs were manually processed to have a immediate solution.
we would like to konw how to trouble shoot this scenario?
Following checks were done from our side.
1.There are no entries listed in SM58(tRFC queue)
2.No corresponding entries in the table ARFCRSTATE
3.No network issues.
4.No clue in the Gateway trace.
Is there a way to trace the IDOC stats??
Clara

Hi,
Status 12 means that the IDoc has been passed over to the receiving system.
The report RBDMOIND checks that the transaction ID for all IDocs in status 03 are not stuck in the RFC layer If no entry is found, the status is changed to 12.
The receiving system has not acknowledged that this specific IDoc has been received, it is only an indicator that the RFC call is not pending.
aRs

How to findout in IDOC whch segment error out

Hi All,
If an IDOC error out then how to know which IDOC segment needs to be corrected without going through all the segments. Is there any transaction or table exists to know the status of error segment.
Thanks in Advance
Swapna!

Hi,
There is no such transaction. Some time in WE02 it shows the errored data segment. To check if i shows the error segment or not,
- go to WE02 and display your errored idoc.
- from the menu select "Edit --> Segments with errors".
If it shows errored segments, you are lucky. Otherwise you will have to figure out which segments is with error.
Regards,
RS

How to send Outbound IDocs through an RFC-enabled FM

Good day to all;
A partner system (AS/400) wants to use a Java Connection to execute a RFC Function Module, in SAP, that will then return a collection of IDocs.
Currently, the Function Module builds the IDocs, but I'm not exactly sure how to simply send those IDocs back to the AS/400.
If anyone can help in this regard, that would be great.
My current thoughts are to use Master_IDoc_Distribute, but then I imagine that requires a port configuration for the AS/400. And if this is the case, does that mean that SAP will send the IDocs back itself instead of using the RFC interface?

Hi Tavares,
If you want to send outbound IDoc to AS/400 (external system), you need to setup file port (t/code WE21).
For RFC interface, you need to setup RFC file port with RFC Destination (t/code SM59). In this case, SAP will send IDoc (individually or batch) to receiver system (AS/400). Perhaps you need a middleware for data transformation, if AS/400 does not perform data mapping for outbound IDoc.
For FTP interface, you need to setup flat/XML file port for outbound. then you can FTP the file to AS/400 later on.
In addition to file port configuration, you also need to setup partner profile for outbound parameter (t/code WE20) and the distribution model (t/code BD64).
Hope this will help.
Regards,
Ferry Lianto

Reprocess Outbound Idocs

Hi There
The system has dispached several Idoc to the middleware software, actually all my Idoc have 07 status Error during syntax check, this means that something is wrong with the traslation. I would like to resend all of those messages again to the middleware. I tried trhoght BD87 but I cannot execute this process.
The operation cannot be carried out with this node type
Message no. B1891
Thanks in advance
Alexis Ramirez

Hi,
Set the IDOC status back to 30 using the program RC1_IDOC_SET_STATUS and execute the program RSEOUT00 for all those idoc's then they will be resent again.
If you use WE19 transaction a new IDOC is going to be generated and moreover you shouldn't use the WE19 transaction in the production environment.
Thanks,
Mahesh.

How to find Outbound Idoc number from inbound Idoc number.

Hi,
I have one inbound Idoc in my system, then
How to find the idoc number from the system which sends that idoc(Outbound Idoc number).

Hello
You can use fm SREL_GET_NEXT_NEIGHBORS for this purpose.
Scenario: An EDI purchase order is received by SAP-XI and forwarded as Inbound ORDERS IDoc to R/3. SAP-XI generates an (outbound) IDoc number which differs from the (inbound) ORDERS05 IDoc in the R/3 system.
Calling fm SREL_GET_NEXT_NEIGHBORS with the following parameters:
OBJECT-OBJKEY = <IDoc number, 16-digits>
OBJECT-OBJTYPE = 'IDOC'
MAX_HOPS = '99'            " <<< get all links
I get the following result:
0000000000133906                                   IDOC       CUSTOMER   OUTIDOC
0000000000407402                                   IDOC                  INIDOC
000000370383                                       BUS2012    CUSTOMER   OUTBELEG
0010057944                                         BUS2032               INBELEG
Outbound IDoc number
Inbound IDoc number (ORDERS05)
PO number
Sales order (created from inbound ORDERS IDoc)
Regards
Uwe

How to debug outbound Idoc function module for invoice

I have to debug the outbound IDOC function module and UserExit for invoice message type INVOIC, process code SD09, function module is IDOC_OUTPUT_INVOIC and user exit for the function module LVEDF001.
I tried putting the break point in function module IDOC_OUTPUT_INVOIC and recreate the IDOC using WE19 but it creates the idoc but does not stop at the break point. I have also tried generation of idoc through VF02. It again creates the idoc but does not stop at the function module.
Please let me know if I am missing any thing and not doing it right.
Appreciate your help.
Rohit

Hi Ali,
I faced the same problem. Thing is the break point is not getting triggered when i ran tha IDOC through WE19.
What i have done is i created a project for my exit in CMOD and kept some junk code in the exit and executed it through BD21. Then the Break point got triggered. See if it works.
Regards,
Uday S.

How to trigger outbound IDOC when data changed in BP through Inbound IDOC.

Hi,
    In our system whenever we create a new Business Partner, these data is send across to SAP R/3 (as BDOC) and to Mainframe system (as outbound IDOC). Whenever we change any Business Partner record the data is send across to SAP R/3 (BDOC) and to Mainframe system (as outbound IDOC).
    This functionality is working fine.
    Currently we are getting a value for one standard field (Customer_Group3) of Business Partner as an inbound IDOC. The value of the inbound IDOC is reflecting in the field (Customer_Group3) in Business Partner Transaction. Once the inbound IDOC is received, the modified value is send across to SAP R/3 as BDOC. But the modified value is not send across to Mainframe system (outbound IDOC). The outbound IDOC is not getting triggered.
Kindly help

Is your mainframe system configured as Site in SMOEAC. If so are you using XIF Adapter.

How to Reprocess Outbound Idocs in Status 02 (Errors)

Similar Messages

Maybe you are looking for