How to stop the rename the cn again if it had meet the condition
How to stop to rename the CN in Active directory if running the script.
This is my script:
$objSearch = New-Object DirectoryServices.DirectorySearcher
$dateNow = Get-Date
$DomainDNS = "server2008.server1.com" #server 2008
$ADpath = [ADSI]"LDAP://$DomainDNS/ou=power shell test,dc=server1,dc=com"
$objSearch.Filter = '(&(objectClass=user)(objectCategory=person)(!samaccountname=user1))'
$objSearch.SearchRoot = $ADpath
$objSearch.PageSize = 1000
$objSearch.SearchScope = "subtree"
$objResults = $objSearch.Findall()
write-host 'objResults: ' $objResults
foreach($objResult in $objResults){
$objuser = $objResult.GetDirectoryEntry()
$name = $objuser.cn
write-host "name:" $name
if (($objuser.cn -notcontains "DA$name")){
$changeName = "DA" + $name
write-host 'CHANGE NAME: ' $changeName
$objuser.rename("cn=$changeName")
$objuser.CommitChanges()
else {
continue
The result I get is :
what I want the result is:
I don't understand your pictures.
Start with this as it is less prone to failure.
$searcher=[adsisearcher]'(&(objectClass=user)(objectCategory=person)(!samaccountname=user1))'
$searcher.SearchRoot='LDAP://ou=power shell test,dc=server1,dc=com'
$searcher.Findall() |
ForEach-Object{
$user=$_.GetDirectoryEntry()
write-host "name:$($user.name)"
if($user.cn -ne "DA$($user.name)"){
$changeName="DA$($user.name)"
write-host "CHANGE NAME:$changeName"
$user.rename("cn=$changeName")
$user.CommitChanges()
¯\_(ツ)_/¯
Similar Messages
-
my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help
I have had the same problem. It was cured by turning computer off and/or restarting it. I am not sure if once was enough. I think shutting down must cut out whatever it is that blocks bluetooth. Good luck
-
Please tell me how you got the computer to reboot again once it was on the black screen saying "setup is inspecting your hardware configuration?"
Hi,
use the power-switch on the left backside of your iMac to turn your Mac off.
Use it again to restart your Mac and hold down the Alt/Option-button to get to the Boot Selection screen.
Choose OSX.
Once in OSX go to System Preferences - Startup Volume and reset it to use OSX as the default.
Am I right assuming that you try to install Windows XP on a new (2011) iMac ?
If so, XP is no longer supported by Apple for use/install With BootCamp.
But there are some success stories when using a XP with SP3.
Regards
Stefan -
the 3d features require 'use graphics processor' is enabled in the performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly
Hello I'm also getting this error.. can anybody help me out? Here's my log.
Adobe Photoshop Version: 2014.0.0 20140508.r.58 2014/05/08:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2128 MHz
Built-in memory: 2934 MB
Free memory: 231 MB
Memory available to Photoshop: 2354 MB
Memory used by Photoshop: 70 %
3D Multitone Printing: Disabled.
Touch Gestures: Disabled.
Windows 2x UI: Disabled.
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
glgpu[0].GLVersion="2.1"
glgpu[0].GLMemoryMB=1242
glgpu[0].GLName="Intel(R) HD Graphics"
glgpu[0].GLVendor="Intel"
glgpu[0].GLVendorID=32902
glgpu[0].GLDriverVersion="8.15.10.2993"
glgpu[0].GLRectTextureSize=8192
glgpu[0].GLRenderer="Intel(R) HD Graphics"
glgpu[0].GLRendererID=70
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32"
glgpu[0].GLDriverDate="20130130000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.20 - Intel Build 8.15.10.2993"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447 ]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[512]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[1024]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[41]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
License Type: Tryout Version
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\ANNABE~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 298.0G, 63.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2014/04/14-23:42:44 79.554120 79.554120
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdbePM.dll PatchMatch 2014/04/23-10:46:55 79.554276 79.554276
AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
AdobeOwl.dll Adobe Owl 2014/03/05-14:49:37 5.0.33 79.552883
AdobePDFL.dll PDFL 2014/03/04-00:39:42 79.510482 79.510482
AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
AdobeXMP.dll Adobe XMP Core 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPFiles.dll Adobe XMP Files 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPScript.dll Adobe XMP Script 2014/01/13-19:44:00 79.155772 79.155772
adobe_caps.dll Adobe CAPS 8,0,0,7
AGM.dll AGM 2014/04/14-23:42:44 79.554120 79.554120
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
amtlib.dll AMTLib (64 Bit) 8.0.0.45 BuildVersion: 8.0; BuildDate: Fri Mar 28 2014 20:28:30) 1.000000
ARE.dll ARE 2014/04/14-23:42:44 79.554120 79.554120
AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
Bib.dll BIB 2014/04/14-23:42:44 79.554120 79.554120
BIBUtils.dll BIBUtils 2014/04/14-23:42:44 79.554120 79.554120
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
CoolType.dll CoolType 2014/04/14-23:42:44 79.554120 79.554120
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
imslib.dll IMSLib DLL 7.0.0.145
JP2KLib.dll JP2KLib 2014/03/12-08:53:44 79.252744 79.252744
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 7.2.1.3399
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS 2014/03/25-23:41:34 79.553444 79.553444
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC 2014 15.0
Plugin.dll Adobe Photoshop CC 2014 15.0
PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.0.0.74
PSArt.dll Adobe Photoshop CC 2014 15.0
PSViews.dll Adobe Photoshop CC 2014 15.0
SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 7.0.1.102
VulcanControl.dll Vulcan Application Control Library 5.0.0.82
VulcanMessage5.dll Vulcan Message Library 5.0.0.82
WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 15.0 (2014.0.0 x001)
Accented Edges 15.0
Adaptive Wide Angle 15.0
Angled Strokes 15.0
Average 15.0 (2014.0.0 x001)
Bas Relief 15.0
BMP 15.0
Camera Raw 8.0
Camera Raw Filter 8.0
Chalk & Charcoal 15.0
Charcoal 15.0
Chrome 15.0
Cineon 15.0 (2014.0.0 x001)
Clouds 15.0 (2014.0.0 x001)
Collada 15.0 (2014.0.0 x001)
Color Halftone 15.0
Colored Pencil 15.0
CompuServe GIF 15.0
Conté Crayon 15.0
Craquelure 15.0
Crop and Straighten Photos 15.0 (2014.0.0 x001)
Crop and Straighten Photos Filter 15.0
Crosshatch 15.0
Crystallize 15.0
Cutout 15.0
Dark Strokes 15.0
De-Interlace 15.0
Dicom 15.0
Difference Clouds 15.0 (2014.0.0 x001)
Diffuse Glow 15.0
Displace 15.0
Dry Brush 15.0
Eazel Acquire 15.0 (2014.0.0 x001)
Embed Watermark 4.0
Entropy 15.0 (2014.0.0 x001)
Export Color Lookup NO VERSION
Extrude 15.0
FastCore Routines 15.0 (2014.0.0 x001)
Fibers 15.0
Film Grain 15.0
Filter Gallery 15.0
Flash 3D 15.0 (2014.0.0 x001)
Fresco 15.0
Glass 15.0
Glowing Edges 15.0
Google Earth 4 15.0 (2014.0.0 x001)
Grain 15.0
Graphic Pen 15.0
Halftone Pattern 15.0
HDRMergeUI 15.0
IFF Format 15.0
Ink Outlines 15.0
JPEG 2000 15.0
Kurtosis 15.0 (2014.0.0 x001)
Lens Blur 15.0
Lens Correction 15.0
Lens Flare 15.0
Liquify 15.0
Matlab Operation 15.0 (2014.0.0 x001)
Maximum 15.0 (2014.0.0 x001)
Mean 15.0 (2014.0.0 x001)
Measurement Core 15.0 (2014.0.0 x001)
Median 15.0 (2014.0.0 x001)
Mezzotint 15.0
Minimum 15.0 (2014.0.0 x001)
MMXCore Routines 15.0 (2014.0.0 x001)
Mosaic Tiles 15.0
Multiprocessor Support 15.0 (2014.0.0 x001)
Neon Glow 15.0
Note Paper 15.0
NTSC Colors 15.0 (2014.0.0 x001)
Ocean Ripple 15.0
OpenEXR 15.0
Paint Daubs 15.0
Palette Knife 15.0
Patchwork 15.0
Paths to Illustrator 15.0
PCX 15.0 (2014.0.0 x001)
Photocopy 15.0
Photoshop 3D Engine 15.0 (2014.0.0 x001)
Photoshop Touch 14.0
Picture Package Filter 15.0 (2014.0.0 x001)
Pinch 15.0
Pixar 15.0 (2014.0.0 x001)
Plaster 15.0
Plastic Wrap 15.0
PNG 15.0
Pointillize 15.0
Polar Coordinates 15.0
Portable Bit Map 15.0 (2014.0.0 x001)
Poster Edges 15.0
Radial Blur 15.0
Radiance 15.0 (2014.0.0 x001)
Range 15.0 (2014.0.0 x001)
Read Watermark 4.0
Render Color Lookup Grid NO VERSION
Reticulation 15.0
Ripple 15.0
Rough Pastels 15.0
Save for Web 15.0
ScriptingSupport 15.0
Shake Reduction 15.0
Shear 15.0
Skewness 15.0 (2014.0.0 x001)
Smart Blur 15.0
Smudge Stick 15.0
Solarize 15.0 (2014.0.0 x001)
Spatter 15.0
Spherize 15.0
Sponge 15.0
Sprayed Strokes 15.0
Stained Glass 15.0
Stamp 15.0
Standard Deviation 15.0 (2014.0.0 x001)
STL 15.0 (2014.0.0 x001)
Sumi-e 15.0
Summation 15.0 (2014.0.0 x001)
Targa 15.0
Texturizer 15.0
Tiles 15.0
Torn Edges 15.0
Twirl 15.0
Underpainting 15.0
Vanishing Point 15.0
Variance 15.0 (2014.0.0 x001)
Water Paper 15.0
Watercolor 15.0
Wave 15.0
Wavefront|OBJ 15.0 (2014.0.0 x001)
WIA Support 15.0 (2014.0.0 x001)
Wind 15.0
Wireless Bitmap 15.0 (2014.0.0 x001)
ZigZag 15.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Installed TWAIN devices: NONEWhat Intel video card do you have? The only Intel HD graphics cards officially supported by Photoshop CC are:
Intel HD Graphics P3000
Intel HD Graphics P4000
Intel(R) HD Graphics P4600/P4700
Intel HD Graphics 5000
Go here to read more about the requirements: Photoshop CC and CC 2014 GPU FAQ -
I just bought the iPad2 16gig and I wish I had gotten the 32 gig. Is it possible for me to exchange it?
If you purchased the iPad directly from Apple, either online or from a retail Apple Store, you have fourteen calendar days from date of purchase to return it. You can then get the higher-capacity model. If you purchased the iPad from a dealer, then that dealer's return/exchange policy, if any, would apply.
Regards. -
Hi All,
I have a nice little PowerShell function that is scrubbing the eventlog for a 'positive' hit under a certain error code for each user in a defined window.
basically we are looking to see if they are still logging into OCS...
Since it takes what seems like an eternity to scan the whole security log per the 'get-eventlog' statement and then evaluate it it is $true or not... i would like it to break out as soon as it finds one hit without going all the way back x days unless it
has to.
have been trying to use this for testing... with no avail
if (Get-EventLog -LogName Security -ComputerName myOCSserver -after $date -InstanceId 540 -UserName "domain\myuser") {
Write-Host -ForegroundColor Green "UserName found!... Check Passed"
}Else {
Write-Host -ForegroundColor Cyan "UserName not found... delete this account"
if i run the command it will start writing each hit to the screen... i just need it to stop scanning if it finds one but not sure how to break out and now do an action since it is $true... (or $false) :)
Thanks in advance!!!I'm not sure i'm understanding this correctly but i'm assuming you only care if one shows up in there at all. If so this might speed things up depending on where in the log the first entry is.
Get-EventLog -LogName
Security -ComputerName myOCSserver
-after $date -InstanceId
540 -UserName "domain\myuser" | select -first 1 -
How Can I get My iMac Running again when its stuck in the Loading boot up Screen?
My 2010 21.5 Imac wont stop loading, The wheel just keeps spinning and it doesn't even boot in safe mode. the only thing i can do is get into single user mode. My Mac doesn't respond to command + r. I am able to pull up a disk to boot from but it doesn't show a recovery disk, only "Macintosh HD", when i click it I'm back at the apple logo screen with spinning wheel.At this point i want to do one thing and that is factory reset the computer. a fresh install, delete everything, NO BACK UPS. I don't have the install CD (This Computer had a previous owner). If i were to buy a copy of the OS X from the apple store (I believe my computer was running 10.6.8, Im not 100%sure and i dont now how to find out at this point) would i be able to even put the CD in the disc drive? would it read the CD even though its stuck in the boot up(loading) screen? How would i get it out if the Drive doesn't read the disk? Do I have Other options? Thanks guys!
You are using Snow Leopard. There is no COMMAND-R for a startup. That's for Lion or later.
Call Apple and purchase replacement discs for your model. You cannot use the retail version of Snow Leopard on your model. You have no other options unless you have the original discs that came with the computer. When you get the discs:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Before I updated Firefox, my tabs were on the same line as the search/url bar, and I didn't have the back/forward buttons. I liked the simple design I had, but now it doesn't seem like I can go back to that setting.
There is an extension which gives you a lot of control over your toolbar layout. It is described and linked in this article: [[How to make the new Firefox look like the old Firefox]]. Can you get the result you're looking for?
-
Please help!
I'm sorry, you are correct I am trying to restore my ipad because it stopped working. We thought the battery was dead so we plugged it into the wall charger. All it does when plugged in is flash the apple logo like it is going to start up and then shut off. It repeats this every few seconds while it is plugged into the wall. I let it charge overnight and still nothing.
When I hold the power button and the home button down together while the ipad is plugged into the wall, it does flash then after I release the power button the connect to itunes screen comes on. But when I connect it to my computer it goes blank. itunes does not recongnize my ipad when I plug it into the computer. I have used the same cord to plug in my other devices and itunes recongnizes them so it isn't the usb cord.
It seems as if my system has crashed and I think this may just be an apple service trip for me. But thanks so much for the advice. =D -
Hi My name is Tibor Madarasi i purchased a Blackberry 8900 brand new i can't install app world i instaled the updates for this phone (v4.2.0.85)still can install app world i receive the error "axError.gif Sorry, your device does not meet the system requirements that are needed to support BlackBerry App World." I'm using O2 network in London UK Please advice me Regards
Message Edited by MichelleK on 06-15-2009 09:53 AMffbizz wrote:
I hate this bold 9700 series 2 no carrier and find it to be a pathetic product backed up by even more pathetic support so I have decided to use it as a torch. There is an app for this but it requires app world first. Are you trying to say that I MUST have a carrier and they will resolve this issue but otherwise RIM cannot do anything about their own product?
Hello and Welcome to the Forums!
We are so sorry that you are having so many difficulties. While many experience the same (a search here will reveal that fact), there are also many who have very positive experiences with their BB. Not every device is suitable for everyone -- which IMHO is why there are so many choices.
In addition, but for AppWorld, front line support for BB's is, by contract, not provided by RIM. The carriers and authorized resellers are responsible for front line formal support to end users. It is possible to bypass your carrier and seek assistance direct from RIM, but such involves fees since you are bypassing your support agreement with your carrier. The "Support and Services" tab toward the top of these forum pages provide information about that. But, if you do go through your carrier for support, they can escalate into RIM at no fee to you if they so choose to.
As to AppWorld Support (beyond what we volunteer to provide in these forums), that is available via this portal:
https://www.blackberry.com/CSOHelp/index.do?ft=generic
If you choose to submit to them in this manner, then please use, in the "Please select a component:" field, the AppWorld Billing/Payment selection. Any other selection will simply route you back anonymously to these public forums.
As to your question, RIM and the carriers both participate in AppWorld. My suspicion is that the carriers get a portion of the costs for the apps that are vended via AppWorld -- but that's just my suspicion. Hence, the use of AppWorld indeed requires a carrier (and, indeed, the proper data plan level from them).
But, AppWorld is merely a portal, vending apps that are (for the most part) developed by others. As such, it is not the only portal in the world for BB apps. There are a few, I think, apps that are exclusively vended via AppWorld...but I think that number is rather small. Consequently, if you desire an app that will allow your BB to function as you desire, you should seek out alternative vending portals. There are plenty.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
A message came up on my desktop asking me to click on it and it warned me about my toolbars would no longer work. I believe I had just deleted Google Chrome. Now every time I want to go online I have to wait a minute or so before a message comes up and states: A script on this page may be busy or it may have stopped responding. You can continue to see if the script will complete". Then under the above message is this:
Script:chrome://tavgp/content/libs/include.js:595.
There are two boxes underneath that state "Continue" or "Stop script". I click on the "stop script" box and then I can get online. I don't know what this means or how to get rid of it and how do I get Firefox toolbar to work again? Did I do anything to my computer that is causing this error? I never had this problem until I clicked on the first message and I am sorry I didn't write the info down but I didn't know all this was going to happen.That is a problem with an AVG extension (toolbar).
See:
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
How to stop sapscript calling MS word when I want to edit the elemets...
Hello Experts,
In SE71, when I want to edit the element/codes of a particular window, I click on the 'edit text elements'
window but it calls MS word and the code is displayed there. I want the 'original' editor
wherein I can see the '/E', '=', etc.HI,
In the EDIT menu , there should be a change editor option..... dont you have it ? If it is not there..... then i am not sure what to do further...
regards,
Venkatesh -
How to stop phone from dialing other numbers while I am on the phone
Hello everyone one out there!! I have had the iphone for over a month now and I am very happy with it so far. I was somewhat hesitate from buying after reading all the horror post that users have been leaving, but with anything I must try it out myself to make my own opinion. I am very impress with my purchase. The only problem that I am having is, when I am making a call and having conversation with someone my cheek will touch the touch screen and start either instant messaging someone or calling someone. Is there a way that after I dial a number I can turn off the touch screen so that my cheek will not interfer. Any advise?
As has been mentioned, there is a proximity sensor which is supposed to inactivate the touch screen when it is up against your face.
By any chance, are you using a case with your iPhone? Some cases may partially or completely block the proximity sensor and prevent it from working. Try removing your case and see if things start to work normally.
If the problem persists, you may have a broken sensor and need to get it repaired by Apple. -
HT201365 how can i used my ipad mini again if ever i forgot the passcode?
forgot the passcode
You must restore the device using the instructions in here. Read this all the way through before you begin, especially the very end of the article, the part about using Recovery. Mode or iCloud.com may come in handy
iOS: Forgotten passcode or device disabled after entering wrong ... -
pleas help
Did yoo go to Settings>iTunes and App Stores and sign out and sign back in?
Next see:
Frequently Asked Questions About Apple ID
Maybe you are looking for
-
Multiple bank exist. Please specify bank to use.
Hi All, While clearing vendor account through transaction code F-51, system is displaying error "Multiple bank exist. Please specify bank to use". Vendor master has two bank accounts with BnkT (Bank type) as 01 and 02 respectively. Thanks
-
hello freinds, Happy Christmas ..! i have a Master_Detail form, FORM2 "LN_HEAD" table, that has 3 primary key; ln_code ln_no ln_emp_code "LN_DET" table has foreign key; Relation is set at form design time. lnd_ln_code lnd_ln_no lnd_ln_emp_code Form2
-
Can I use imovie 9 with a sony handycam DCR-HC36?
I am using a mac mini 2.4 ghz intel core 2 duo with OS X 10.6.8.
-
Button Alignment in a TreeView
How can I right-alline Buttons in a TreeView. I have this: http://i44.tinypic.com/2reilhz.jpg but want this: http://i44.tinypic.com/33xc1ua.jpg I am trying to achieve this with a special TreeCell implementation and using a HBox as the container for t
-
Linker error «error: undefined reference to '__ZN7problemC1Ev'»
Here's some code I have been trying to compile all day and having gotten a cryptic linker error that I can't figure out. First here is my Makefile: T09: check @echo "-------- problem --------" "$(FLASCC)/usr/bin/g++" $(BASE_CFLAGS) main.cpp -swf-