How to store as single record data coming from different ods to cube

Hi All,
        we have the scenario like .
Same contract values are uploaded from 3 ods to cube.In the cube this information is stored as 3 different records.
Is there any option having same contract no and same fiscal period values should be stored as single record in cube.
Thanks in advance.
Regards,
Shradda.

Hi Shradda,
On Performance Side .....consider below points
1. Indexes on Cube ( That delete indexes before load and create them after Load ).
2. Aggregate Design ( Decision on Base Aggregates, roll up Hierarchy , BW Statistics etc ).
3. Partition of InfoCube ( Basically decision on No. of Partition )
4. Data Package Size ( Always try to have larger Data Package so that preaggreation will reduce the no. of Data Records ).
Best is Service.sap.com on BI page u will find material for performance . THat will help you .
To assign points on the left of screen u will get radio buttons for assigning points for each person who has responded .
Regards,
Vijay

Similar Messages

  • How to make a single multi-view clip from different cameras?

    Hi,
    I recorded one conversation between two people with two different cameras (i.e., a camera per person) and I'd like to create a single video clip where the two clips from the two cameras are positioned side by side, i.e., one clip of the two people talking. I tried creating a Multicam clip but I didn't see an option to export the sequence as a single clip (also there was no option of how to place the clips which suggested that Multicam clip may not be the solution for this).
    Is there a way to do that in Final Cut Pro X?
    Of course, this would also involve synchronising the two clips based on the audio waveform and then detaching the audio from the non-master clip. 
    Any advice and recommendations will be highly appreciated.
    Cheers,
    Katya

    This may be helpful.
    Russ

  • How to store the data coming from network analyser into a text or excel file

    Hii everyone
    I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
    Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
    Attached is the vi for kind consideration...
    Looking for help
    Regards
    Rohit
    Attachments:
    Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

    First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
    The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
    The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How to store the flat file data into custom table?

    Hi,
    Iam working on inbound interface.Can any one tell me how to store the flat file data into custom table?what is the procedure?
    Regards,
    Sujan

    Hie
    u can use function
    F4_FILENAME
    to pick the file from front-end or location.
    then use function
    WS_UPLOAD
    to upload into
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      CALL FUNCTION 'F4_FILENAME'   "Function to pick file
        EXPORTING
          field_name = 'p_file'     "file
        IMPORTING
          file_name  = p_file.     "file
      CALL FUNCTION 'WS_UPLOAD'
       EXPORTING
         filename                       = p_file1
        TABLES
          data_tab                      = it_line
    *then loop at it_line splitting it into the fields of your custom table.
    loop at it_line.
              split itline at ',' into
              itab-name
              itab-surname.
    endloop.
    then u can insert the values into yo table from the itab work area.
    regards
    Isaac Prince

  • How to insert data coming from 2 different file adapters in to one DB adapt

    Hi
    i want insert data in to database containing two diffferent tables, so i imported tables in to DB adapter by creating relation ships.But, data for two tables are in xml format & two are in different locations.So, i used 2 file adapters to get data from 2 different & i used BPEL(Define service later) Service. now in bpel i used receive activity to receive one file adapter data ( i checked create instance in receive) then used transform activiy for tranformation & finally invoke activity to invoke DB adapteer........similarly i repeated sequetially to 2 file adapter, by keeping 2nd receive(no need to check create instance) next to invoke.*Problem is after deployment finished only data coming from 1st receive is inserting to the table...& 2 nd receive not working it showing as Pending & showing as Asynchronus Call back inte console*
    I configured all the adapters perfectly..........Can any one can help me how to Commit 2 nd receive to insert data in the 2nd table
    Regards,
    jay

    Thank u both for ur replay.........
    I am doing this in 11g there is no problem regarding transform activity.
    My requirement is
    two different files from two different folders in a drive & we can't use one file adapter bcoz both have different columns(only few are common columns) so we use two different xsd's .So, i am using two file adapters to insert in database having two different tables with respect to two different files data coming from two file adapters. i am using one DB adapter to insert bcoz both tables are in same database with relationships & i used BPEL(define service later) .
    NOW PLEASE SUGGEST ME THE FLOW IN BPEL TO INSERT BOTH FILES IN THERE RESPECTIVE TABLES IN DATABASE.
    The flow i did 1st file adater--->receive--->transform---->invoke----->DB adapter.....Then again repeating this as keeping 2nd receive below 1st invoke
    2nd file adapter-------->2nd receive---->2nd invoke------>same DB adapter
    MY problem is only data coming from 1st process is inserting & 2nd one is not working as i discussed earlier........I USED READ FILE OPTION, UNCHECKED DELETE FILES OPTION & SET DIFFERENT POLLING FREQUENCY FOR BOTH FILE ADAPTERS.
    I tried to set correlation but it is not working & later tried i kept non-blocking invoke as TRUE in DB adapter also didn't work...........also i tried this transaction property in bpel component _<property name="bpel.config.transaction"_
    many="false" type="xs:string">required / requiresNew</property>...............BUT NO CHANGE...........
    Regards,
    jay
    Edited by: 910162 on Apr 5, 2012 12:38 AM

  • How can i use an ao card (pci 6723) to output data and to trigger an ai o acquire the data coming from the ao card?card (pci 6254) t

    Hello
    I am trying to perform AO (pci 6723) and to trigger my AO card (pci
    6254) to read the data coming from the AO card. I am using LV7,1,
    win2000.
    Is an RTSI cable necessary or I can connect the trigger signals externally ?
    I am using the LV example " multi function - synch ai-ao.vi" but i can't for some reason configure the trigger lines.
    thank you in advance for your time.
    Yiannis

    Hello Yiannis,
    If I understand you correctly, you want to synchronize your analog input and analog output that are started by a trigger on the analog input board. If you don't want to use the RTSI lines, your best bet is to export the AI Sample Clock and then read it in to the AO board. There is an example on ni.com called DAQmx - Synchronized AIAO Shared Clock. It appears to be having techincal issues so I have attached the example below. To export ai/sampleclock, use DAQmx Export Signal.vi after Get Terminal Name with Device Prefix.vi. Export Sample Clock to PFI3 (There are only connections between the sample clock and PCI3/4/8/9). Connect PFI3 on your AI board to PFI0 on your AO board (with a wire). Then change the source for the AO Timing.vi to Devx/PFI0. If you want to do triggering, stick the DAQmx Trigger.vi between the Timing property node and the DAQmx Start.vi on the AI task. I have shown how to do this in the modified version below. Please take a look at it and let me know if you have any questions. If you still get an error please take a screenshot of it and post to the forum. Have a great day!
    Sincerely,
    Marni S.
    Attachments:
    Synchronized_AIAO_Shared_Clock[Modified].vi ‏140 KB

  • How to store and retrieve blob data type in/from oracle database using JSP

    how to store and retrieve blob data type in/from oracle database using JSP and not using servlet
    thanks

    JSP? Why?
    start here: [http://java.sun.com/developer/onlineTraining/JSPIntro/contents.html]

  • Reading data coming from a port

    How can I read the data coming from a webcam?

    Reading from a parallel port. But even if you do know how to read from a serial port that would be helpful

  • Fill a table with data coming from an RFC

    Hello everyone:
    I've followed the Weblog "How many lines of java code did i write for a simple Web Dynpro?"
    /people/durairaj.athavanraja/blog/2004/10/17/how-many-lines-of-java-code-did-i-write-for-a-simple-web-dynpro
    I've called an RFC and created a table with data coming from it (which is also a table). My question is, if in this table there's a field named "UserType" there are two possible values for this field:
    "userA"
    "userB"
    How can I get the table only show me the "userA" registers? The RFC does return all of the users, but when filling the table, can I put an if-else somewhere on my code?
    Thanks a lot
    Alejandro

    Hi Alejandro,
    Referring to the link provided "The logic of the filter process is not implemented in Web Dynpro. The application developer must implement the action to be executed."
    We would have to implement the action onFilter in the controller implementation. Ideally, we fill the data retrieved from backend into a List (java.util.List) (this could be done on init of view) and then subset the list after meeting the criteria in the action handler(say
    onActionFilterData(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent).
    Having done this, you may bind the output list back to the node (shown in table)
    Regards,
    Chaitanya

  • Is it possible to record data directly from PXI-5112 scope card through PXI bus to SCSI RAID array (connected to PXI-8210)?

    Colleagues,
    Is it possible to record data directly from PXI-5112 scope card through PXI bus to SCSI RAID array (connected to PXI-8210)?
    Which will be the maximum transfer rate for continuous data recording?
    Thank you,
    Sergey
    Sergey

    Sergey,
    The PXI-8210 can connect to any SCSI 2 compliant device. If the RAID controller is SCSI 2 and appears just like a hard drive in the operating system, then you can send data directly to the RAID array. The problem is that the driver for the PXI-5112 does not yet support continuous acquisition. The on-board 16MB or 32MB buffer stores the data until the entire acquisition is completed. Once the acquisition complete, all of the data is transferred from the on-board buffer to the hard drive. After that happens, the NI 5112 is ready for another acquisition.
    Best Regards,
    Jace Curtis
    NI Applications Engineering

  • Satellite P300-23L - can't record audio coming from an internal source

    Hi.
    I can't record audio coming from an internal source. Can someone assist please?
    I have reinstalled the devices etc but other recording devices does not show up.
    Thanks
    Operating System: Windows Vista Home Premium (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.100218-0019)
    Language: English (Regional Setting: English)
    System Manufacturer: TOSHIBA
    System Model: Satellite P300
    BIOS: PhoenixBIOS 4.0 Release 6.1
    Processor: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz (2 CPUs), ~2.0GHz
    Memory: 2908MB RAM
    Page File: 3012MB used, 3005MB available
    Sound Capture Devices
    Description: Microphone (Conexant High Definition SmartAudio 221)
    Default Sound Capture: Yes
    Default Voice Capture: Yes
    Driver Name: CHDRT32.sys
    Driver Version: 4.83.0001.0000 (English)
    Driver Attributes: Final Retail
    Date and Size: 1/15/2009 14:50:10, 439296 bytes
    Cap Flags: 0x1
    Format Flags: 0xFFFFF
    Message was edited by: markrowe

    This is OK because the Conexant sound chip does not support other sources
    Ive got a unit with Realtek sound chips and with Conexant sound chip.
    The Realtek support the recording from other sources but Conexant doesnt.

  • How to load data from a ODS to CUBE Request ID - by - Request ID?

    <i>How to load data from a ODS to CUBE Request ID - by - Request ID?</i>
    The problem is that... some requests had been eliminated of the cube and the delta control between the ODS and CUBE was lost. The flag "<b>data mart status of request</b>" of all the requests of the ODS had been blank.
    Now it is necessary to load some requests from the ODS for the cube.
    Notes:
    - it is not possible to make a complete load selecting the data to be loaded;
    - the PSA is not being used;
    - considering the data volume it is impracticable to reload the cube completely.
    Thanks in advance,
    Wesley.

    Dear R B,
    Considering the following:
    -> the delta control was lost;
    -> the data already are active in the ODS;
    -> part of the data of the ODS already is in the cube.
    The indicated procedure it only guarantees the load of the data that are in the ODS and that are not in the cube.
    Tks,
    Wesley.

  • How to change it if some data is wrong in ODS and infocube

    hi all:
        could you please tell me how to change it if some data is wrong in ODS and infocube ?
    Best regards

    You receive information on all requests that have run in the InfoCube and you can delete requests if required.
    http://help.sap.com/saphelp_nw04s/helpdata/en/d4/aa6437469e4f0ae10000009b38f8cf/frameset.htm
    Request ID you can find in administration of the InfoCube. If a cubes is compressed you can't delete requestwise...
    Regards
    Andreas

  • In the NI Library VI: Extract Numbers, the string control is automatically loaded each time the VI is opened with "Counting to five: one 2 three 4.0 five. Where is this string data coming from?

    Even after deleting the string "Counting to five: one 2 three 4. five." from the string control and replacing it with another string the original string returns after the VI is saved then reopened. Where is this string data coming from? I've attached a copy of the library function. I've been able in my application to get around the problem by replacing the string control with a string constant. But I'm still curious as to what's going on.
    Thanks,
    Chuck
    Solved!
    Go to Solution.
    Attachments:
    Extract Numbers Test.vi ‏9 KB

    Chuck,
    String control has been set to default with the string you are seeing.  To change this, enter the new string, right click the control and select
    Data Operations>>Make Current Value Default
    Now save your vi.

  • How to retrieve start and end date values from sharepoint 2013

    Hi,
    How to retrieve start and end date values from new event form of calendar in SharePoint foundation2013
    Thanks
    Gowri Balaguru

    Hi Srini
    Yes i need to have parallel flow for both and in the cube where my reporting will be on monthly basis i need to read these 2 master data and get the required attributes ( considering last/first day of that month as per the requirement).......but i am just wondering this is common scenario....while there are so many threads written for populating 0employee from 0person......don't they have such requirement.....
    Thanks
    Tripple k

Maybe you are looking for