How to store bank details of the Super Funds
Hi Guys,
We are doing some work to improve our processes and reporting around the Superannuation payments.
Currently for each Super Fund we setup a new Organisation in HRMS under Work Structures -> Organization -> Description, but we don't save the bank details there.
Could you please advise what is the best practice to store the bank details/payment methods of the Super funds?
We are planning to generate a payment file for Super Funds that would include superfund's bank details.
Thanks,
Iana
Are you referring to custom reports ?
Do you want to store extra info at the Organization level ?
If so, you can use EITs -
Oracle HRMS Extra Information Types (EIT): General & Technical Information [ID 70122.1]
Cheers,
Vignesh
Similar Messages
-
How to check the bank details in the table?
Hi All,
i want to develop a report in BW for getting duplicate bank details for the employee.
i am not sure where can i find the details of the bank details field. i have searched in the RSA6 for any datasource which contain any bank details. But there is no such details available on the existing datasource.
I don't know how to proceed further. can any one help me will be greatful.
Regards,
Ganeshhi sivaraju,
in cmod i have given the EXIT_SAP but i am not clear about how to write a program to populate.
i am new to bw can you please help me...
in CMOD
Project Management of SAP Enhancements
Project: EXIT_SAP (Create)
Sub Object
Attributes -
(i have selected this)
Enhancement Assignment
Components
Documents
If i say create it gives error and i can't able to change it is in display mode.
Regards,
Ganesh -
Payment run is picking up the old bank details of the vendor
Hi Experts,
Following is the issue :
1. Vendor invoice entered through MIRO/FB60. This picks up the prevalent bank details from the vendor master.
2. Vendor bank details are changed subsequently and payment run made. The payment run picks up the old bank details ( from the invoice document if it saves any where for the posted document ) and not the current details as in the vendor master.
3. Payment is returned from the bank as previous bank details are not valid any longer.
4. I canceled/reversed the MIRO/FB60 document alongwith the payment document.
I re-enter the same invoice through MIRO/FB60. It picks up the current bank data from the vendor master(which are the new bank details and are correct).
5. Then I make the payment run but the payment still goes to the previous bank details (which were changed and are no longer valid) and not to the current details(which are on the invoice) and is again returned by the bank.
What is the reason and how to correct this issue. Your early reply will be really appreciated.
Thanks & Regards,
BABAHi,
By default the payment will go to the bank that is listed first in the vendor master. If you do not need the old details, delete them completely from the master data and leave only the new ones. Alternatively use the Partner Bank field to assign the invoice to which Bank the payment is to be made.
Kind regards -
Bank details of the Vendor are not picked up from Vendor Master in APP Run
Hai SAP Gurus,
When the Automatic Payment Programme(F110) was run it is not giving bank details of the vendor in the payment file. These details are sent to bank in the file form. It should give account holder name in the payment file where as it is not giving.
Kindly help me at the early
Thanks in advance
Akash NarayanHi,
Good morning and greetings,
Please go through the following link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/e7/65382ad2d211d29e430000e839cd96/frameset.htm
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan -
Error in the Bank Details in the Personal information
Hi,
I am getting the following error message when clicking to the Bank Details in the Personal information.
500 Internal Server Error
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:102)
at com.sap.xss.per.fc.persinfo.FcPersInfo.onCleanup(FcPersInfo.java:536)
at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfo.onCleanup(InternalFcPersInfo.java:796)
at com.sap.xss.per.fc.persinfo.FcPersInfoInterface.onCleanup(FcPersInfoInterface.java:246)
at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface.onCleanup(InternalFcPersInfoInterface.java:299)
... 56 moreHi,
have you checked the config settings for the resprective country molga under spro->Employee Self-Service->service specfic settigs->own data->define active subtypes and application case ?
also, once you set the infotype and subtypes please also check in backend pa30, infotype 9, the various subtypes. also, check the user case assigned to them. please read the config node help and check with PA consultant on the time constraints for these subtypes so that the user case can be assigned accordingly
Regards
Reshma -
Bank details in the vendor mastr data is to be suppressed
I have requirement to supress all the fields in the vendor master data other than the address. I have created the separate Vendor account group and I have suppressed all the fields in the system. Still I am getting the Bank details in the vendor master data. Please help me to eliminate this
Hi,
Please check the below path.
SPRO-> IMG-> Financial Accounting->General Ledger Accounting->G/L accounts->Master Data->Preparations->Define Account Group
Please select the respective Account group and click on Field status.
Click Bank/financial details and choose Supress.
Now try creating a new vendor under the account group and check.
Regards,
Divya -
Tabular Form - How to store in a column the User details (APP_USER)
Hi all,
I have let's say the following table:
USER_COMMENTS(
ID number primary key,
COMMENT_TEXT varchar2(50),
POSTED_BY_USER varchar2(50),
DATE_POSTED date,
UPDATED_BY_USER varchar2(50),
DATE_UPDATED date)
How do I, using a Tabular Form, get the USER details in the columns POSTED_BY_USER and UPDATED_BY_USER and the SYSDATE in DATE_UPDATED...
I've tried the following:
Created tabular form, all fields included. In Report Attributes > edit UPDATED_BY_USER > Display as Display as Text (saves state); Default Type: Item (application or page item); Default: APP_USER.
It's not working.
Thanks!
AndreiIt has to be a text field column type with source like the other updatable columns. You should hide that column and create a second of display as text if you want to show the content. Once this is done then you can use the default value and just type the item name there as you did:
P1_ITEM
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------------------ -
LSMW recording with XK02 to enter Bank details after the current bank data
Hi
I am using LSMW with Recording method to populate the Bank details of XK02. Here i need to get the number of Bank details using LFBK table because user need to enter the loaded Bank data as a new line each time. Please let me know in which place can i enter this Select statement to get the number of records and how can get this in LSMW.
Please let me know this.
Basani.Hi Friend,
The table control can be handle by the index recording, you need to record it with the index number in the braces with the record counter.
If you want to enter multiple entries into table control you need to go with report approach. you can't handle it in the LSMW.
Better to go with any BAPI or IDOC approach for the same.
the dummy recording for table control is as follows for your reference:-
*Second Screen
PERFORM z_bdc_dynpro USING 'SAPMV10A' '0200'.
PERFORM z_bdc_field USING 'BDC_CURSOR'
'MV10A-MATNR(01)'.
PERFORM z_bdc_field USING 'BDC_OKCODE'
'/00'.
First Material number
PERFORM z_bdc_field USING 'MV10A-MATNR(01)' <-------This is the table control index and the counter needs to be handle in report itself.
wa_cmir-matnr.
PERFORM z_bdc_dynpro USING 'SAPMV10A' '0200'.
PERFORM z_bdc_field USING 'BDC_CURSOR'
'MAAPV-ARKTX(01)'.
PERFORM z_bdc_field USING 'BDC_OKCODE'
'=SELE'.
Customer material
PERFORM z_bdc_field USING 'MV10A-KDMAT(01)'
wa_cmir-kdmat.
PERFORM z_bdc_dynpro USING 'SAPMV10A' '0300'.
PERFORM z_bdc_field USING 'BDC_CURSOR'
'MV10A-VWPOS'.
PERFORM z_bdc_field USING 'BDC_OKCODE'
'BACK'.
Regards;
Dhirendra -
Hi All,
I am on a support project, SAP HR went live and the client started running the payroll w.e.f April 2009. Till now there was no problem with the payroll run, but this time all of a sudden the "Bank Account Number" for around 15 employees is not coming on the standard payslip. I have checked all the related dates of the entries in IT0009 but could not track the problem....
Please help.....
Regards,
Shruti B.Hi
Pls check out the mode of payment
T for bank treansfer
c for cheque
in case of change in bank details
exsisting records should be copied and start with
the new date
ie for example if emp changed his bank w.e.f.01.10.2009
previous record should be copied and then
new record to be created w.e.f 01.10.2009 and not to
be changed w.e.f. dt of joining
with regards
partha -
ADD or Change Bank Details in the Customer master
Hello Gurus,
I am looking for a BAPI or Function Module that will help me to update the Payment Transaction Tab of the customer master that contains the Bank details. I tried using BAPI_BUPA_BANKDETAIL_ADD and BAPI_BUPA_BANKDETAIL_CHANGE, but these are allowed to be used if only Business Partner is created for the payer/customer in SAP R/3.
For every customer we donot have BP created in R/3, hence the above bapis donot help to meet my requirement.
Has any of you had this requirement and used any bapi or any other method to add / change bank details.
Expecting lots of options from you experts,
Thanks & Regards in advance,
Casimerhi, thnks for the update,
i have followed as per your guidelines, but i could not able to generate the report , i have included the tables knb1, kna1 and knvv. and in the list field i have selected all the dialog box , and in the selection list i am selecting according to the customer account group .
but i cannot able to excuete the report it says "no data has been selected" and it says the following msg
"When executing a query on the selection screen, no data was found for the criteria you entered. Therefore, no list could be generated."
is there any problem in choosing the table should i have to choose according to the order level , like General data, company code data, and sales area data .
can u help me on this
thanks -
Hi All,
What is the structure linked with the "Bank Details Field" located in the following screen:
People -> Enter and Maintain -> Assignment -> Others -> Pay Method.
is it KFF or DFF? cause when I'm trying to fill the field, no LOV was appeared!
Thanks in AdvanceIt's "Bank Details KeyFlexField" and is a Key flexfield for Payroll.
You need to define this flex field structure for your localization and then try to setup with some List of values for each segment.
Hope this helps
Ram G -
How to store forms fields into the session ?
Hi All,
I have to store forms fields into the session.
I have four forms (htm forms) in four jsps and there are total 25 fields.
I am inserting all the fields into the database at once while user submit the last form.
I want to use session to store forms fields.
So please anybody tell me how to do that.
Is the following code correct to store the forms fields into
the sesstion........
// creating a session
HttpSession session=request.getSession(true);
// retrieving form fields
String name=request.getParameter("customer_name");
String business=request.getParameter("business");
String address=request.getParameter("address");
and so on....
// store form fields into the session
session.setAttribute("name",name);
session.setAttribute("business",business);
session.setAttribute("address",address);
and so on....
and later on get the value as:
session.getAttribute("name");
session.getAttribute("business");
session.getAttribute("address");
and so on....
OR
is there another way to store form fields into the session.
Please guide and reply with coding.....
Please answer and help.
Thanks
AmitindiaI don't mean to be an *** but I have no desire to help someone so unwilling to think >>and do. Go through some of these tutorial, do the examples in each and you will be far >>better equipped to ask questions:
http://www.google.co.za/search?hl=en&q=%2Bjsp+%2Bjavabean+%2Btutorial&b >>tnG=Google+Search&meta=
I was just asking that if I use the following
<jsp:useBean id="cart" scope="session" class="session.Carts" />
<jsp:setProperty name="cart" property="address" value="myaddress" />
</jsp:useBean>then will I be able to acheive my aim as I have to store form fields into the session and later retreive while user submit the last form.
Please read my question that I have posted.
Am I using the right way................or which is the best way to store form fields into the session and later retrieve them.
please reply
Thanks
Amitindia -
BT asking for bank details over the phone
On Friday evening I received a call from someone saying they were from Bt.
The caller said my bill hadnt been paid and if I didnt pay it now my service would be suspended, (I was moved from quarterly billing to monthly and my direct debit had been cancelled an was now whole bill payment monthly).
When I asked where the caller was from he said the Philipines, alarm bells started ringing. I asked to speak to someone in the UK and was told I could not be transferred, I then asked for someone in the Uk to call me, again I was told it wasnt possible as they had no contact with the UK.
A call from someone asking for bank details immediately makes me suspicious, (theres lots of scams out there).
Why is it not possible to speak to someone in th UK?
BobIf you would like to contact one of the UK based BT Care Team who moderate this forum, they should be able to help you.
They can be contacted using this link BT Care Team
They normally respond by phone or e-mail, within three working days, however you should get an immediate confirmation, with a tracking number.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
How to Store PDF files In the Oracle Database?
Hi All,
It is required for me to store the PDF files in the Database and retrieve it back whenever necessary.
Also I need to store it with some security. So no one can read the content of the file.
Please give me solution to these problems.
Thanksvasav wrote:
Hi All,
It is required for me to store the PDF files in the Database and retrieve it back whenever necessary.Why not save the files to disk and store a link to the file in the database instead?
Also I need to store it with some security. So no one can read the content of the file.Authenticate users requesting files.
Please give me solution to these problems.There are many possible solutions for your requirements. -
How to store Live stream on the other Server
Hello Everyone,
This is very important for me to store all live streams in the archive server at F4V sormat.
to do that I record live stream in the F4V:
mystreams.publish('mp4:' + netstream.name + 'f4v');
mystream.recod();
This cods is work currently in the rootinstall directory's but I wan to store on the archive directory in other linux server.
1- I share the archive folder in the archive server.
2- Create folder on the AMS linux server in the applications/livepkgr/streams/_definst_/archive
3- mount archive folder to the archive folder in other server:
mount -t cifs -o administrator=root,password=myams //192.168.1.100/Archive /opt/adobe/ams/applications/livepkgr/streams/_definst_/Archive
So Archive Server is: 192.168.1.100/Archive.
Now I have problem to store live streams in the Archive server...!!!
When I start publish live events on the Flash Media Server, AMS is make video file with f4v format in the Archive server (ams have access to write in other server) But this file has 0kb. there is no capacity.
Please advise me to solve this problem.
Many Thanks.This seems like a good guide:
http://www.marcoach.nl/index.php/nl/tech-tips/55-os-x-mountain-lion-webmail.html
Lion Server (10.7) does still have webmail on board, although this is not the forum, this is.
Maybe you are looking for
-
Iphone won't charge after overheat warning
Ok so every night I go to sleep I plug in my phone to charge, play some youtube videos or listen to music or podcasts( on the official apple app) until i fall asleep and every morning I have woken up to a fully charged phone, I have been doing this f
-
Hi, I have some problem with imp on logical standby database. I have this posted on IMP & EXP errors. Kindly have a look and suggest. ORA-01031: Insufficient privileges Thanks, Aswin.
-
Recommended approach for validating page content on activation?
Hi, Is there a recommended approach to implementing validation in CQ5 (we are using 5.5) that will run when a Page is activated? I have been reading up on different approaches for this, but have not been able to find a clear solution. The requiremen
-
3.0 over 2.66 any disadvantage
Other than the obvious cost difference is there any disadvantage getting the 3.0. Mac OS X (10.4.8)
-
EJB Timer Services - timeout overlapping
Hi, I have this question: What should happen if the @Timeout method spends more time in working something than the timer expiration time? For example: EJB timer is created with interval (expiration time) every 3 minutes. But for some reason the EJB b