How to store Multiple Attachments in Workflow.

Hello All,
I am doing an scenario, in that i need to store multiple attachments in the workflow container.
Kindly help me, how to store and also, how to retrieve those attachments form worklfow.
I am using custom workflow.
Thanks in advance......
Best Regards,
Chandran S

Hi Jubish/Venkat
1. I iterated this fucntion moudule to store the multiple attachments to the workflow
SAP_WAPI_ATTACHMENT_ADD
2. Call this FM to get the attachemnts form the workflow (pass workitem Item id which is used for storing the attchments). SAP_WAPI_GET_ATTACHMENTS
from above you will get objkey for each attachment as output in table.
3. Pass the objkey to this FM to get the contents
SO_DOCUMENT_READ_API1'. this will retrun the content of the attachment either in object_content, contents_hex.
4. Pass the Obtained content to SCMS_BINARY_TO_XSTRING to get the disired format.
Best Regards,
Chandran S

Similar Messages

How to handle Multiple attachments in sender Mail Adapter

Hi,
In our requirement is mutiple documents send through mail adapter, In custom java module we read the each document details and do it bussiness process. But now i am not able to read the multiple files at a time. we are able to read single file only. So plz give the solution for that.
1) How to send multiple attachments(like word, PDF, JPG etc..) using mail apapter.
2) How to read multiple attachments in custom java module.
Thanks & Regards
Vijay

Hi Vijay,
Go through this weblog this explains steps to multile attachments.
/people/sravya.talanki2/blog/2006/01/12/xi-triggering-e-mails-with-multiple-attachments--problems
Regards,
Ashwin.

How to store multiple files from SAp in to Application server?

Hi Guys,
             Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
            Any Logic or Code for how to do is welcomed.
                    plz help me urgently.
Thanks,
Gopi

Hi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
        DIRNAME(200)     TYPE c, " name of directory.
        sp_name(100)     TYPE c," name of entry. (may end with *)
      END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
        dirname(75) TYPE c,            " name of directory.
        aliass(75) TYPE c,            " alias for directory.
        svrname(75) TYPE c,            " svr where directory is availabl
        sp_name(75) TYPE c,            " name of entry. (may end with *)
        sp_cs(10)   TYPE c,            " ContainsString pattern for name
      END OF isearchpoints.
data: l_file type filetable.
data: l_rc   type i.
data: itab   type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat      type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
   FILENAME                      = in_file
   "FILETYPE                      = 'BIN'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = ' '
   HEADER_LENGTH                 = 0
   READ_BY_LINE                  = 'X'
   DAT_MODE                      = ' '
TABLES
    DATA_TAB                     = itab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
     TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
    move g_tmp_file_path to in_file.
    h_destin = ''.
    SPLIT g_tmp_file_path at '\' into table itab.
    loop at itab into g_tmp_file_path.
      h_destin = g_tmp_file_path.
    endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies    TYPE TABLE OF dfies.
DATA: lwa_dfies   TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
    EXPORTING
      tabname    = '/BI0/PCO_AREA'
      lfieldname = 'CO_AREA'
    IMPORTING
      dfies_wa   = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT   = 'Destination directory'.
lwa_dfies-LENG      = 100.
lwa_dfies-INTLEN    = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD = 'SP_NAME'
      DYNPPROG = SY-REPID
      DYNPNR = SY-DYNNR
      DYNPROFIELD = 'destin'
      VALUE_ORG = 'S'
    TABLES
      VALUE_TAB = searchpoints
      FIELD_TAB = lt_dfies
    EXCEPTIONS
      PARAMETER_ERROR = 1
      NO_VALUES_FOUND = 2
      OTHERS = 3.
*&      Form select_input_file_name
*       text
form select_input_file_name.
* call function 'F4_FILENAME'
*       exporting
*            program_name = sy-repid
*            dynpro_number = sy-dynnr
*            field_name    = 'PATH'
*       importing
*            file_name     = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    "select_input_file_name
*&      Form WRITE_DB_HOME
*       Write DB home directory
*       no parameters
FORM write_db_home.
CASE sy-dbsys(3).
    WHEN 'ORA'.
      CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
                         ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ORAHOME',       30 searchpoints-dirname.
      MOVE: 'DIR_ORAHOME'        TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'ADA'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ADA_DBROOT',    30 searchpoints-dirname.
      MOVE: 'DIR_ADA_DBROOT'     TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'INF'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
      MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
      APPEND searchpoints..
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'DB6'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
                      ID 'VALUE' FIELD searchpoints-dirname.
      IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
*        PERFORM flip_flop(rsora000) USING cflag.
*        WRITE: / 'DIR_DB2_HOME',    30 searchpoints-dirname.
        MOVE: 'DIR_DB2_HOME'       TO searchpoints-sp_name.
        APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
      ELSE.
        EXIT.
      ENDIF.
    WHEN OTHERS.
      EXIT.
ENDCASE.
ENDFORM.                    " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = sy-uname.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = 'all'.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL'         TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
    PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING'         TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF'           TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG'          TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN'           TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
    DATA: windir_path(64), programfiles_path(64).
*   hoping that ProgramFiles is set in service user environment
    CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
                    ID 'VALUE' FIELD programfiles_path.
    IF programfiles_path IS INITIAL.
*     %ProgramFiles% not available. guess from windir
      CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
                      ID 'VALUE' FIELD windir_path.
*     e.g. S:\WINDOWS ==> S:\Program Files
      CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
    ENDIF.
    CONCATENATE programfiles_path '\SAP\hostctrl'
                                             INTO searchpoints-dirname.
ELSE.
*   on UNIX, the path is hard coded
    searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
                     ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
    IF sy-opsys = 'Windows NT'.
      searchpoints-dirname = '.\'.
    ELSE.
      searchpoints-dirname = './'.
    ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP'        TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS'          TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB'          TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
                     ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
    h_ind = sy-tabix.
    IF searchpoints-sp_name IS INITIAL.
      DELETE searchpoints INDEX h_ind.
    ENDIF.
ENDLOOP.
ENDFORM.

How to accept multiple attachments on selection screen?

Hi All,
I need to know how to accept multiple attachments on selection screen and send them as email to external system (outlook).
Basically, my req is to send a common email with attachments to certain users. These users are displayed in ALV. User will select ALL or specific user from ALV and send an email with message entered on selection screen.
I used text editor control to input message body. I need to know how to accept attachments and send them.
Appreciate any inputs.
Thanks,
SKJ

SAP uses a nifty little button called 'Object Services' on ME23N (top left) which you can use to attach documents to business objects.
http://help.sap.com/saphelp_nw70/helpdata/EN/be/3fe63659241157e10000009b38f889/frameset.htm
It's a complicated way of doing it but might give you extra functionality in the long run.

How to display multiple attachments in UWL item in portal?

HI,
How to display multiple attachments in UWL item in portal?
I want to display more than one attachment in UWL body,present its dispalying one attachment.
Pls help on this
Thanks,
Bheem
Edited by: v bheem on Aug 4, 2009 3:10 PM

Hi,
Are you able to manage this! Pls do let us know if you have done any configuration changes!

How to create multiple outecomes in workflow

Hi Gurus,
I am developing the PR workflow. and in that I want to create 2 different nodes for signle activity.
how can I create those multiple outcomes for signel activity in workflow.
Thanks in Advcance.
Moderator message : Wrong forum, post the question in Workflow forum. Thread locked.
Edited by: Vinod Kumar on Aug 3, 2011 1:49 PM

Hi Jubish/Venkat
1. I iterated this fucntion moudule to store the multiple attachments to the workflow
SAP_WAPI_ATTACHMENT_ADD
2. Call this FM to get the attachemnts form the workflow (pass workitem Item id which is used for storing the attchments). SAP_WAPI_GET_ATTACHMENTS
from above you will get objkey for each attachment as output in table.
3. Pass the objkey to this FM to get the contents
SO_DOCUMENT_READ_API1'. this will retrun the content of the attachment either in object_content, contents_hex.
4. Pass the Obtained content to SCMS_BINARY_TO_XSTRING to get the disired format.
Best Regards,
Chandran S

Multiple attachments in Workflow Notification

Hi All,
We are trying to attach multiple(Two) files to the workflow notification. We are able to get the two attachments. But the problem is in the notification from front end both the attachments are opening the same file, where as the attachments in the outlook are showing different contents and the file name is same for both the attachments.
Please can anyone help us in this. This is very urgent requirment.
Thanks,
Varun

Hi Jubish/Venkat
1. I iterated this fucntion moudule to store the multiple attachments to the workflow
SAP_WAPI_ATTACHMENT_ADD
2. Call this FM to get the attachemnts form the workflow (pass workitem Item id which is used for storing the attchments). SAP_WAPI_GET_ATTACHMENTS
from above you will get objkey for each attachment as output in table.
3. Pass the objkey to this FM to get the contents
SO_DOCUMENT_READ_API1'. this will retrun the content of the attachment either in object_content, contents_hex.
4. Pass the Obtained content to SCMS_BINARY_TO_XSTRING to get the disired format.
Best Regards,
Chandran S

How to store multiple data in one aray at one go?

Hi i am creating a Recipe Cooking Book and i have got a recipe class, ingredient class, equipment class and jFORM GUI. the gui form will have a list and it will contain couple of equipments. the user should be able to select more than 1 equipments which would use the pass- by - value to the recipe class and it will be passed to equipment class.
The problem that encounter is that when i have to select multiple values from list, it should store all selected equipments to array.
This is where i am stuck as i don't know how to store couple of equipment at one creation.
This is my recipe constructor in recipe class
public Recipe(int aRecipeID, String aRecipeName, String aCountryofOrigin,
                  String aType, String aPreparationTime, String aCookingTime,
                  String aRecipeDescription, String aProcedure,
                   ClsEquipment[] aequipment, String aImage1, String aImage2,
                  String aImage3) {
        Create(aRecipeID, aRecipeName, aCountryofOrigin, aType,
               aPreparationTime, aCookingTime, aRecipeDescription, aProcedure,
               aequipment, aImage1, aImage2, aImage3);
    public void Create(int aRecipeID, String aRecipeName,
                       String aCountryofOrigin, String aType,
                       String aPreparationTime, String aCookingTime,
                       String aRecipeDescription, String aProcedure,
                        ClsEquipment[] aequipment, String aImage1, String aImage2,
                       String aImage3) {
        RecipeID = aRecipeID;
        RecipeName = aRecipeName;
        CountryofOrigin = aCountryofOrigin;
        Type = aType;
        PreparationTime = aPreparationTime;
        CookingTime = aCookingTime;
        RecipeDescription = aRecipeDescription;
        Procedure = aProcedure;
        *equipment[j] = aequipment[k];*
        Image1 = aImage1;
        Image2 = aImage2;
        Image3 = aImage3;
this is The command that i have in Jform gui
    public void jRcreateButton_actionPerformed(ActionEvent e) {
        int i=0;
myRecipe.Create(Integer.parseInt(jRidTextField.getText()),jRnameTextField.getText(),jRcountryTextField.getText(),jRtypeTextField.getText(),jRptimeTextField.getText(),jRctimeTextField.getText(),jRdescriptionTextArea.getText(), jRprocedureTextArea.getText(),new ClsEquipment(jAEequipmentList.getSelectedValues()),jRimage1TextField.getText(),jRimage2TextField.getText(),jRimage3TextField.getText());
Let me conclude what i am trying to do. Basically i want the user to select more than 1 equipments from the List and the user should also input other recipe data. once this is done, the should click on create.
when creating one recipe, u need more than 1 equipment so that created recipe should store selected equipments, which i will later on retrieve and display on screen.
can u please guide me where i am goin wrong and how i could fix it.
thank you in advance
Edited by: JAVABABY on Feb 18, 2008 8:40 AM

       *equipment[j] = aequipment[k];*JList's getSelectedValues() method returns an array of Objects, so if you wanted to store it into another Object[] reference, you'd just use
equipment = aequipment;But, you are storing it as an Equipment array, so you'll need to loop over the Object array and cast each element to an Equipment reference, and store it into the Equipment array. Something like this:
equipment = new Equipment[aequipment.length];
for (each element x in aequipment) {
    equipment[x] = (Equipment)aequipment[x];
}

How to send multiple attachments thru mail?

I haven't been able to figure out how from the mail application send docs, worksheets etc as attachment. Also how to attach multiple docs in the mail. Looking for help on this.
Sparashar

You need to start in the app that contains the files that you want to send as attachments and use that app's functionality to select and attach files to an email, and not start in the Mail app e.g. the GoodReader app supports multiple document types (word and excel, read only, PDFs, text files, pictures) and allows you to select one or more of them and attach/switch with them to an email.
In the Mail app itself on iOS 6 you can now press and hold the body of the email and select photos from the Photos app to attach to it.

How to store Multiple values with restriction in Oracle 9i

Hi,
I am using oracle 9i R2 and i would like to know that how can i store multiple values and restrict some of values into oracle table?
ex.
I need to create table or inserting into existing table like below:
ID will be Primary/Unique key and each ID has multiple dept but each ID to have only 1 “X” dept, only 1 “Y” dept and only 1 “Z” dept… but, can have multiple “W” dept
What will be the best option to create/store data like this?
Like Table level Constraint (Unique or Check), Triggers or pl/sql?
ID     DEPT
1     X
1     Y
1     Z
1     W
2     X
2     Y
2     Z
2     W
2     W
2     W

Hi,
Other solution:
Function:
CREATE OR REPLACE FUNCTION my_unique_function(p_dep IN VARCHAR2) RETURN VARCHAR2
   DETERMINISTIC AS
BEGIN
   IF (p_dep = 'X' OR p_dep = 'Y' OR p_dep = 'Z') THEN
      RETURN p_dep;
   ELSE
      RETURN NULL;
   END IF;
END;
/Test:
Connected to Oracle Database 10g Express Edition Release 10.2.0.1.0
Connected as hr
SQL> create table emp(id number, dept varchar2(30));
Table created
SQL>
Function created
SQL> CREATE unique index ix_emp on emp(my_unique_function(dept));
Index created
SQL> insert into emp(id,dept) values (1, 'X');
1 row inserted
SQL> insert into emp(id,dept) values (2, 'X');
insert into emp(id,dept) values (2, 'X')
ORA-00001: unique constraint (HR.IX_EMP) violated
SQL> insert into emp(id,dept) values (3, 'Y');
1 row inserted
SQL> insert into emp(id,dept) values (4, 'Y');
insert into emp(id,dept) values (4, 'Y')
ORA-00001: unique constraint (HR.IX_EMP) violated
SQL> insert into emp(id,dept) values (5, 'Z');
1 row inserted
SQL> insert into emp(id,dept) values (6, 'Z');
insert into emp(id,dept) values (6, 'Z')
ORA-00001: unique constraint (HR.IX_EMP) violated
SQL> insert into emp(id,dept) values (7, 'W');
1 row inserted
SQL> insert into emp(id,dept) values (8, 'W');
1 row inserted
SQL> Regards,

How to store / retrieve attachments?

Hi Experts,
I am sending message attachments to XI using ABAP Proxy program. The message itself has a number which identifies the attachment.
My requirement is to store the attachment in some format in ABAP table. The is required because there is a webapplication which will send a SOAP request to XI to fetch the attachemnt. The request will have the attachment identification number and the response should have the attachment itself in SOAP body.
Could you please tell me how to store the attachment in XI and how to retrieve the same using a webservice call?
Thanks,
Shobhit

Hi,
Refer these articles
http://help.sap.com/saphelp_nw04/helpdata/en/a7/3b2a2d45a34a23b75e3b18745c63bc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/705c3c3806af06e10000000a11402f/content.htm
Refer these blogs
ABAP POP3 Email Client Using an RFC enabled PHP client proxy
XI: Reliable Messaging EOIO in ABAP Proxies
BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
Regards,
Suryanarayana

How to save multiple attachments in Lion Mail?

In Snow Leopard Mail, I can save multiple attachments to my Downloads folder with one click. In Lion Mail, I see no way to save attachments except by right-clicking on them one at a time. I must be missing something. Information appreciated.

I believe you are missing something. I'm not on my Mac right now but there should be a setting where to save attachments and also muiltiples at one time.

How to send multiple attachments with the mail in jsp

hi.I wrote a code to send mail.but i need to send mail with multiple attachments.when i run this code iam able to send message but not files.i want to send files as attachments with the message.please help me.
<%@ page import="javax.mail.*,javax.mail.internet.*,java.util.Date,java.io.*,java.net.InetAddress,java.sql.*,java.util.Properties,java.net.*,javax.sql.*,javax.activation.*,java.util.*,java.text.*" %>
<%@ page import="java.io.*,java.sql.*,java.net.*,java.util.*,java.text.*" %>
<%
String Attachfiles1="";
String Attachfiles2="";
String Attachfiles3="";
if("Send".equalsIgnoreCase("send"))
try
String subject="",from="",url = null,to="";
String mailhost = "localhost";
Properties props = System.getProperties();
String msg_txt="";
String strStatus="";
String mailer = "MyMailerProgram";
to=request.getParameter("to");
from=request.getParameter("from");
subject=request.getParameter("subject");
msg_txt=request.getParameter("message");
props.put("mail.smtp.host", mailhost);
Session mailsession = Session.getDefaultInstance(props, null);
Message message = new MimeMessage(mailsession);
message.setFrom(new InternetAddress(from));
message.setRecipients(Message.RecipientType.TO,InternetAddress.parse(to, false));
message.setSubject(subject);
message.setHeader("X-Mailer", mailer);
message.setSentDate(new Date());
message.setText(msg_txt);
BodyPart messageBodyPart = new MimeBodyPart();
BodyPart messageBodyPart2 = new MimeBodyPart();
Multipart multipart = new MimeMultipart(); // to add many part to your messge
messageBodyPart = new MimeBodyPart();
javax.activation.DataSource source = new javax.activation.FileDataSource("path of the file");
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName("file_name");
messageBodyPart2.setText("message"); // set the txt message
multipart.addBodyPart(messageBodyPart);
multipart.addBodyPart(messageBodyPart2);
Transport.send(message);
out.println("Message Sent");
catch (Exception e)
e.printStackTrace();
if("Attachfiles".equalsIgnoreCase("attachfiles"))
Attachfiles1=request.getParameter("fieldname1");
Attachfiles2=request.getParameter("fieldname2");
Attachfiles3=request.getParameter("fieldname3");
%>
<html>
<body>
<div class="frame">
<form action="Composemail.jsp" method="post">
<b>SelectPosition:</b> <select name="cars" >
<option value="ABAP">ABAP
<option value="saab">Saab
<option value="fiat">Fiat
<option value="audi">Audi
</select><br><br>
<table border="1" cellpadding="2" cellspacing="2">
<tr><th>Name</th>
<th>EmailId</th>
<th>ContactNumber</th>
<th>Position</th>
</tr>
<tr>
<td>
</td>
</tr>
</table><br>
<b>SelectUser :</b><select name="cars">
<option value="Administrator">Administrator
<option value="saab">Saab
<option value="fiat">Fiat
<option value="audi">Audi
</select>
<br>
<b>To :</b>��<input type="text" name="to" size="72"><br>
<b>From :</b>��<input type="text" name="from" size="72"><br>
<b>Subject :</b>��<input type="text" name="subject" size="72"><br>
<%=Attachfiles1%><br><%=Attachfiles2%><br><%=Attachfiles3%><br><br>
<b>Message:</b><br>
��<textarea rows="10" cols="50" name="message">
</textarea> <br><br>
<b>AttachedFile:</b>�<input type="file" name="fieldname1" value="filename" size="50"><br><br>
<b>AttachedFile:</b>�<input type="file" name="fieldname2" value="filename" size="50"><br><br>
<b>AttachedFile:</b>�<input type="file" name="fieldname3" value="filename" size="50"><br><br>
��<input type="submit" name="attachfiles" value="Attachfiles">
<center>
<input type="submit" name="send" value="Send" >
</center>
</form>
</div>
</body>
</html>

Most likely you're not specifying the path of a file on the server machine.

How to handle multiple attachments in XI mail sender adapter?

Hi,
is it possible to handle multiple attachments in a mail receiving in XI?
Our customer wants to send us mails with multiple attachments and we have to convert each attachment to an idoc.
But as I know XI (receiving mails) can handle only a single attachment in a mail. Is it true?
Any ideas?
Thanks a lot!
Regards
Wolfgang

Hi Wolfgang,
Well, although I have never tried a scenario of picking more than two attachments from one mail, I wonder if its possible in the first place!
Here are the reasons why I think it is possible:-
It is not mentioned anywhere in the SAP Notes for mail adapter that it is not possible.
*It is not mentioned anywhere in the SAP help documentation that it is not possible
*Also, I think if the receiver mail adapter can create more than one attachment, the sender should be able to pick more than one!:)
Have you tried defining a PayloadSwapBean module to pick up more than one attachment?
Just try experimenting with this particular part of the module code:-
Content-Disposition: attachment;filename="MailAttachment-1.xml"
Content-Description: MailAttachment-1
I think even the following weblog might be able to help you to a certain extent:-
"Receiving E-Mail and processing it with ABAP - Version 610 and Higher" - /people/thomas.jung3/blog/2004/09/09/receiving-e-mail-and-processing-it-with-abap--version-610-and-higher
Regards,
Sushumna
Regards,
Sushumna

How to send multiple attachments?

Sorry if this seems like an obvious question but can it be done? Do I need an extra app or helper?
Thanks in advance

Ernie,
I have had problems with sending some attachments to windows users.
i cant tell exactly what is causing it.
usually i am making .pages documents which i then export as PDFs.
many times windows users email me back that they cant even see the attached PDFs (not not open them, but cant even see them).
there seems to be some sort of bug. (yes, attach as windows friendly documents is selected).
some have suggested that attaching multiple attachments using the command click method might be at fault.
others have suggested that exporting to pdf might be a problem and the resulting pdf not always readable by windows users.
can you give any suggestion that might ensure windows users can always open my attached PDFs?
thanks

How to store Multiple Attachments in Workflow.

Similar Messages

Maybe you are looking for