How to store the value of sum of group in Crystal Report at the runtime!

Hello all,
I creates a Formula Field that hold the value of Sum of Group in Crystal Report. I would like to know how to store it in a variable and pass it to store procedure. Is it an option in Crystal report to do it. I knew that Crystal Report can cache the report for sharing. My detailed issue as following:
- Created a Formula Field named TOTAL AMOUNT that calculated the complex expression. This TOTAL AMOUNT is dynamic based on group and variables.
- I would like to store that value from TOTAL AMOUNT and pass it to the stored procedure parameter IN.
Any helps are much appreciated. Thanks.

I doubt that this is possible since it would only calculate this value once the report has data. This sounds more like a report design question that should be asked over [here|SAP Crystal Reports;

Similar Messages

How Can we create parameter field for BP Group on Crystal Report

Hi,
I have something wrong:
I want to create parameter field on Crystal report to select multiple cardcode group, I use for that :
@Select * from ocrg
but when I execute the report the fiel don't give any thing to choice BP Group, it is a null fiel ?
Any Idea how can I do this otherwis
Ps: I want to precise group to display it.
Thanks in advance
Cdt
Malika

Hi Malika.....
Try this simple query report in Crystal with Parameter as CardGroup....
Select T0.CardCode, T0.CardName From OCRD T0
Where T0.GroupCode='{?GroupCode@Select * from OCRG}'
Take above query in command window.
GroupCode@Select * from OCRG
Take above condition in parameter window and then try to run in SAP.
You can see how CFL gets generated and you get values of CardGroup......
The above is only example.......
Regards,
Rahul

Passing single/multiple values to stored proc parameter from crystal report

I tried below solution posted on this forum to pass either a single value or multi-value to a sql server stored procedure parameter (varchar datatype) from crystal report XI R2.
In my crystal report , I am displaying all the available parameter values to the user and the user will select either a single value or multi value.
This worked when I select single value and when I say show sql query in my subreport I see the following:
{CALL "XYZ"."dbo"."storedprocedurename";1('Product 1')}
But this did not worked when I selected multiple values and when I say show sql query in my subreport I see the following:
{CALL "XYZ"."dbo"."storedprocedurename";1('Product 1,Product 2')}
I think it might work if it is as below:*
For multiple values:
{CALL "xyz"."dbo"."storedprocedurename";1('Product 1', 'Product 2')}
Please advise.
Solution Posted on this forum is as follows:
Hi,
As you must be aware of that a crystal report created of a stored procedure will allow only a single value for inserting a multiple value as a parameter in your report and pass those values to your stored procedure please follow the below work around which will be helpful for you.
Symptom
In Crystal Reports, you want to pass a multi-value parameter to a stored procedure. The problem with doing so is that Crystal Reports considers the multi-value parameter to be an array.
How can you pass a multi-value parameter to a stored procedure?
Resolution
Here are the steps to pass a multi-value parameter to a stored procedure:
1. Create a Crystal report, and add a multi-value parameter.
2. Since the multi-value parameter is treated as an array, create a formula that uses the JOIN function. Create a formula as below:
//Formula: @JoinFormula
Join ({?Multi-value parameter array},";")
====================
NOTE:
In the formula above, a semi-colon (";") is the delimiter.
====================
3. Within the main report, create a subreport based on the stored procedure, and include the parameter to be populated with the multi-value list.
4. Link the Join formula in the main report to the stored procedure parameter in the subreport.
Doing so passes a multi-value parameter to the stored procedure.
Regards,
Vinay

Hi Vinay,
First you need to make sure the stored procedure accepts multiple values in the fashion 'a','b','c'.
Then, create this formula in the Main Report:
numbervar i;
stringvar s;
for i:= 1 to ubound({?Parameter}) do
s := s + "'" + {?Parameter}<i> + "'" + ",";
left(s,len(s)-1);
Link this formula to the sub-report's parameter.
Hope this helps!
-Abhilash

How to catch the value in sum(control break statement).

hi,
can any one tell me how to catch the value in sum in control break satament.
ex.
at end of brtwr.
sum.
endat.
I need to print the value in sum only.
I tried to declare a varaible of type i and assigned sum to this variable.
it is giving syntax error that sum is not identified.
How should i do this.
regards.

Hi Siva,
In control break statement when we use SUM. it added all the amount fields and stores its in the work area of that field.
look below code.
DATA : BEGIN OF itab OCCURS 0,
           name(10),
           num TYPE i,
       END OF itab.
DATA : num TYPE i .
itab-name = 'salman'.
itab-num = 100.
APPEND itab.
itab-name = 'salman'.
itab-num = 200.
APPEND itab.
itab-name = 'akshay'.
itab-num = 500.
APPEND itab.
LOOP AT itab.
AT END OF name.
    SUM.
    WRITE : / itab-num.
ENDAT.
ENDLOOP.
here the SUM value is stored in Workarea,
the output will be 300 & 500.
regards
Kumar M

Error Message: The syntax of the value for prompt 'p_phone_num' is incorrect. Please correct the syntax and try again.

Post Author: helpwithcr
CA Forum: General
" The syntax of the value for prompt 'p_phone_number' is incorrect. Please correct the syntax and try again."
I am getthing this error while I tried to pass the value from an oracle package to the web when the the crystal report viewer kicks in.
I found the source of the error. Its just a paranthesis that I used with the phone number inside the function.... The function looks like this
function phone_number
return varchar2
is
begin
return '(123) 456 - 789';
end phone_number;
I really dont want that paranthesis to go. Its the format that everyone wanted. But they dont want that to be static on the report also
Please help
Thanks
helpWithCr

Sir, you are a legend!!!
Many thanks for putting me on the right track...
Here's where I went wrong and how I fixed it.
First I installed the Azure Pack: MySQL Extension on the MySQL server.
This was wrong, it needs to be installed on the WAP server/s.
So I installed the extension on the WAP server and it still didn't work.
So I uninstalled the extension from the MySQL server and it still didn't work.
So I also installed the MySQL Connector/Net on the WAP server and it worked.
This eventually fixed it.
What I will say is that in the documentation it doesn't mention installing the MySQL Connector/Net from the web platform installer on the WAP server (unless I have completely missed this)?
Thanks again :-)
Microsoft Partner

I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.

I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.
===Answer===
Comment on usual method and solution, by a forum Moderator.
As long as there are no confounding factors, such as certain extensions, or a user.jsfile the procedure is as follows
# Open a new tab and type "about:config" in the address bar.
# In the Search bar type: "newtab"
# Locate and double click "browser.newtab.url"
# In the "Enter String Value" box change "'''about:newtab'''" to "'''about:blank'''" and click OK.
# Verify that the value has changed and now all new tabs will be blank.
See post under by ''pirate048'' [/questions/976589?page=2#answer-509482] ~J99

Have to say that I rather agree with Mark..all we want is a simple, unadorned clean page that doe not track and show usage!! WHY NOT!! Is it too simple for developers..we aren't all (nor do we want to be!) software experts! Come on Mozilla..tidy up and clean up..it might be a quicker programme too!!

Is it possible to use the value of a string to reference a component in the

I'm fairly new to Java so this may be a stupid question!
Is it possible to use the value of a string to reference a component in the code? For example in the code below, Wall is a class holding 3 different arrays. The Robot class has an array called finishBricks. When the buildWall method is run it receives the integers width and height which are used to construct the dimensions string. I want to use this string to then load the appropriate Wall array into the finishBricks array.
I hope this makes sense! Any help would be greatly appreciated!
class Robot {
public double[][] finishBricks;
public void buildWall(int width, int height) {
Wall w = new Wall();
String dimensions = "Wall" width "x" +height;
this.finishBricks = w.xxxx; // where xxxx is replaced by whatever the String dimensions is
class Wall {
     public double[][] Wall4x2 = {
          {-30.00,-01.60,27.45},
          {-30.00,-06.75,27.45},
          {-30.00,-13.55,27.45},
          {-30.00,-20.35,27.45},
          {-30.00,-22.00,28.65},
          {-30.00,-16.85,28.65},
          {-30.00,-10.05,28.65},
          {-30.00,-03.25,28.65}
     public double[][] Wall3x3 = {
          {-30.00,-01.60,27.45},
          {-30.00,-06.75,27.45},
          {-30.00,-13.55,27.45},
          {-30.00,-15.20,28.65},
          {-30.00,-10.05,28.65},
          {-30.00,-03.25,28.65},
          {-30.00,-01.60,29.85},
          {-30.00,-06.75,29.85},
          {-30.00,-13.55,29.85},
     public double[][] Wall2x4 = {
          {-30.00,-01.60,27.45},
          {-30.00,-06.75,27.45},
          {-30.00,-08.40,28.65},
          {-30.00,-03.25,28.65},
          {-30.00,-01.60,29.85},
          {-30.00,-06.75,29.85},
          {-30.00,-08.40,31.05},
          {-30.00,-03.25,31.05},

Map walls = new HashMap ();
walls.put ("2x2", new double[][] {
    new double[] {
        1,
        0
    new double[] {
        0,
        1
double[][] wall = (double[][]) walls.get ("2x2");

How do I send an email with a group address and not show the addresses/names of the recipients?

How do I send an email with a group address and not show the addresses/names of the recipients?

Use BCC. That's blind carbon copy. And copy paste the address into the BCC field. It really depends what e-mail program you use how to enable BCC.

How to send a text message to a group of people and save the list for next time?

how to send a text message to a group of people and save the list for next time from an iphone 4s?

Hey there ipremacha,
It sounds like you need to enable Text Message Forwarding on your iPhone for your iPad to send MMS/SMS messages through your phone.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
Thank you for using Apple Support Communities.
Regards,
Sterling

The type of the value being assigned to variable ... differs from the current variable type

I am trying to load a variable on SSIS Execute SQL Task with a string value. I keep on getting an error message :-
“The type of the value being assigned to variable “User::LegacyColumns” differs from the current variable type”.
Below are the settings on my package:
Execute SQL Task Result Set –
Single Row
Variable Data Type –
String
The data to be loaded on the variable is a single row shown below:
FirstName,LastName,MiddleName,PatientType,Title
Can someone kindly help me to solve this as I’m lost for ideas.
Thanks,
Mpumelelo

Thank you Sorna. I think I have managed to solve it. After a long search I have found a solution which advises that I should use a Foreach Loop Container. The help is on this link:
https://social.msdn.microsoft.com/Forums/en-US/f46dea91-c26b-4ffe-ab1c-ebeef57c90b6/error-0xc001f009-at-mypackage-the-type-of-the-value-being-assigned-to-variable?forum=sqlintegrationservices
Mpumelelo

Numbers application on Ipad, the 'VALUE' function doesn't seem to work correctly on the string/text I want to convert to a value.

Hi, I would appreciate if someone could assist with the following. On the Numbers application on my Ipad, the 'VALUE' function doesn't seem to work correctly on the string/text which I want to convert to a value. It gives me an error (in my example: 'VALUE requires a string specifying a number, but found "-14308.65" instead.'
The exact same document (if converted from Numbers to excel), displays the converted string/text correctly in MS Excel as a value though.

click on the cell then in the formula bar and use the arrow keys to move the cursor to see if there are any other characters in the cell that could confuse the function. Also make sure the localization for your country is correct in System Prefs.
Maybe copy the EXACT contents of the cell and post here.

How to embed the Word Document and PDF file into Crystal report?

How to embed the Word Document and PDF file into Crystal report?
I have word doc which having 10 pages. I need to show all of the 10 pages at a time. I tried OLE object but problem is it shows only one page.
Is there any solution to show word doc / PDF file in CR?

Symptom :
When embedding a pdf document into a Crystal Report, only the one page shows.
Reproducing the Issue
Environment:
Crystal Reports OLE object
Cause
An OLE object only displays the first page.
Resolution
Embed multiple objects, one for each page
Or
Use a hyperlink to the object instead
Hope this helps!
Regards,
Vinay

How to? switch between the following mission control preference "group windows by application" on the fly? OR have both readily available

Is there any way to switch between the following mission control preference "group windows by application" on the fly? I would like to turn this feature on and off quickly. OR have both readily available?
If osx 10.9 does not support this, does any one know if automater can be used to creat a short cut to turn this preferance on and off?
Current solution (not much of a solution)
I currently added the preferance control icon for mission control on my dock.

4u2nv247 wrote:
Current solution (not much of a solution)
I currently added the preferance control icon for mission control on my dock.
Do you mean the general System Preferences icon? ...If so, it's possible to put the icon specifically for the Mission Control pane in the Dock:
I'm on Mountain Lion and that Preference Pane is in: Macintosh HD > System (not Users) > Library > PreferencePanes > Expose.prefPane
...Drag that Expose.prefPane to the right-hand side of the Dock, say, next to the Trash. Then you can simply click on the resulting Expose Prefs icon in the Dock to open its Prefs panel.

How to keep file name in print queue when printing crystal report

We are using VB .Net 2003 + Crystal Report 2008 SP2 up to Fix Pack 2.6
When the VB program spools crystal report files to print queue, the print queue only shows "Crystal Report" for each document. How to keep the original file name? In the past when we were using Crystal Report 11, the original file name can be shown in the print queue.
Please help because it's so important for operation to see which report is failed in printing when reports are printed in batch.
Thanks

Hello,
Set the PrintOption.JobTitle value for the print job. Here's C# code on how to:
               System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
            CrystalDecisions.ReportAppServer.Controllers.PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
            CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new PrintOptionsClass();
               pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;
               rasPROpts.PrinterName = cboCurrentPrinters.Text;
               rasPROpts.PaperSize = (CrPaperSizeEnum)
                    pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
            // this sets the name of the print job
            rasPROpts.JobTitle = "MYPrintJob";
               rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
               MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK,MessageBoxIcon.Information );
Thank you
Don

How to Jump (Drill-through) between WebI query (also in Crystal Report)

Hi BO experts,
I read that we can achieve drill-down in Crystal Report and WebI.
But I have requirements here to jump (like RRI or Report to Report Interface) in BEx Analyzer and to pass some values (as parameter), i need to achieve:
1. jump between WebI queries (in WebI)
2. jump between Crystal Report reports (in Crystal Report)
3. jump from Crystal Report to WebI
I read that in WebI, jump can be achieved by just opening the URL of the receiver query, but we can't pass on certain values as parameter from the sender query to the receiver query (which is possible in RRI case).
Has anyone ever done it before? Please let me know how to achieve it..
Thank you very much.

You can navigate beween report using Report Linking. This can be achieved through an Opendocument functionality.
Using Opendocument, you can call a webi report from a parent webi report and then pass parameter's as well. Wigooglth the same feature you can invoke a crystal report also from a webi report and pass values.
In crystal report also you can use Opendocument. However there are better features like sub-reports to do this.
You can google for opendocument or search in SDN to get detailed documentation of OpenDocument.
Anil

How to store the value of sum of group in Crystal Report at the runtime!

Similar Messages

Maybe you are looking for