How to subscribe newsletter code in flex

Hi guys,
Basically I need how to subscribe newsletter to everyone with flex code so plz giveme the code how can we done with flex code.

Hi,
Please click on the mark occurrences button. You can find
this button in the same line as the Run and Debug Flex project
buttons.
Hope this helps.

Similar Messages

How do I tell how many lines of code my flex project has?

Hi, I recently had two programmers build me a 20k plus application and would like to figure out how many lines of code are in the project and if there is a way I can get a print out of all the code. If it helps the project was architected with the caringorm framework.
thanks.

Thanks for the response, do you mean there is no feature for telling you how many lines of codes or no feature for a complete print out or both?
I'm a little in the dark about exactly how big and complex my project is and would like to have a better understanding of the project before I have programmers bid on phase II of development so I can get a fair quote.

How to play HLS stream in flex

i aim to create a flex mobile application for iOS platform，which will play videos of streaming form.
as i kown,only Http Live Streaming(HLS) is supported on iOS, then how to realize the playball of video of HLS form?
if i have a valid m3u8 playlist url,how to play it in my flex mobile application?can anybody help or give me some advices?
i will be thankful!

GRag and Mesh are correct. You cannot use Flex to access a file on a user's hard drive, which is where your path is pointing.
Instead, create a folder within your Flex project, under the "src" folder (example: src/assets/videos), and put the SWF there. Change the path in your code to point to the new location, like "assets/videos/myVideoFile.swf". Note that you don't refer to the src folder; it is the "root" of your application, and when you deploy all your files to your web server, you will be copying the folders you created to the root folder of your web server. So, all the paths will remain consistent. Flex will attempt to find "assets/videos/myVideoFile.swf", starting from the "root", or location, of the application itself.

How to use AMFPHP Objects in Flex

Hi,
I have been successful in getting amfphp to return PHP objects, the question now is how can I make Flex aware of the objects?
I am invoking a remote object and the objects are returned as a result. Can they be used directly or should I use XML?

Hmm, your code seems a bit to complicated. Here's what I do:
The RemoteObject:
<mx:RemoteObject id="PHPGateway" source="yourAMFPHPClassName.ThePHPFile" destination="amfphp" showBusyCursor="true">
<mx:method name="theFunctionYouWantToCall" result="myFunctionResultHandler(event)" fault="myFunctionFaultHandler(event)"/>
</mx:RemoteObject>
Observations:
1. yourAMFPHPClassName is the name of the folder in amfphp\services that contains the PHP classes.
2. ThePHPFile is the PHP class file (without the extension) in the yourAMFPHPClassName folder.
3. You need the <mx:method name="..." .../> to define the function in the PHP class you want to call. The theFunctionYouWantToCall must be the exact name of the function in the PHP class (case sensitive).
The ActionScript part:
//THE BELOW EXAMPLE ONLY WORKS IF THE PHP FUNCTION RETURNS A SINGLE VALUE
//This means the PHP function has a return statement like this: return $value; or return "Test";
private function myFunctionResultHandler(event:ResultEvent):void
var PHPResult:String=String(event.result);
Alert.show(PHPResult);//will show what the PHP class returned
//THE BELOW EXAMPLE SHOWS HOW TO PASS MULTIPLE DATA TO FLEX
//This means the PHP function has a return statement like this:
//$returnValue=array();
//$returnValue['name']="George";
//$returnValue['age']=$age;
//return $returnValue;
private function myFunctionResultHandler(event:ResultEvent):void
Alert.show("Name: "+event.result.name);
Alert.show("Age: "+event.result.age);
//THE FAULT HANDLER
private function myFunctionFaultHandler(event:FaultEvent):void
Alert.show("Data could not be acquired.");

How to use virtual keyboard in flex application

hi..
i am using flash builder 4,
how to use virtual keyboard in flex?
if any one aware of this pls reply me.......
saran r

hi,
how to code for these buttons "control,alt,delete,insert and spacebar".
can u help me how to program?
i have attached the mxml code with this,
virtualkeypad1.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                xmlns:s="library://ns.adobe.com/flex/spark"
                xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600"
                 creationComplete="application1_creationCompleteHandler(event)" viewSourceURL="srcview/index.html">
     <fx:Script>
         <![CDATA[
             import flash.utils.getQualifiedSuperclassName;
             import mx.events.FlexEvent;
             private var inpText:String = 'inp1';
             private var shiftState:Boolean = false;
             private var capsState:Boolean = false;
             protected function keyboard_clickHandler(event:MouseEvent):void
                 this[inpText].text = this[inpText].text+(event.currentTarget as Button).label;
                 if (shiftState == true) shift_clickHandler(null);
             protected function caps_clickHandler(event:MouseEvent):void
                 capsState = !capsState;
                 if (capsState == true)
                     currentState = "SHIFTED" else currentState = "PRIMARY";
             protected function tab_clickHandler(event:MouseEvent):void
                 this[inpText].text = this[inpText].text+"    ";
             protected function shift_clickHandler(event:MouseEvent):void
                 shiftState = !shiftState;
                 if (shiftState == true)
                     currentState = "SHIFTED" else currentState = "PRIMARY";
             protected function enter_clickHandler(event:MouseEvent):void
                 this[inpText].text = this[inpText].text+"\n";
             protected function backspace_clickHandler(event:MouseEvent):void
                 var tmpStr:String = this[inpText].text;
                 this[inpText].text = tmpStr.substr(0,tmpStr.length-1);
             protected function application1_creationCompleteHandler(event:FlexEvent):void
                 inp1.setFocus();
             protected function focus_enterHandler(event:MouseEvent):void
                 inpText = event.currentTarget.id;
         ]]>
     </fx:Script>
     <s:states>
         <s:State name="PRIMARY"/>
         <s:State name="SHIFTED"/>
     </s:states>
     <fx:Declarations>
         
     </fx:Declarations>
     <s:TextInput id="inp1" y="36" width="151" horizontalCenter="0" click="focus_enterHandler(event)" y.PRIMARY="239" horizontalCenter.PRIMARY="42" width.PRIMARY="199" height.PRIMARY="31"/>
     <s:Group id="keyboard" width="661" height="184" horizontalCenter="0" y="300" focusEnabled="false">
         <s:Button x="5" y="5" label="~" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="`"/>
         <s:Button x="49" y="5" label="!" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="1"/>
         <s:Button x="93" y="5" label="@" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="2"/>
         <s:Button x="137" y="5" label="#" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="3"/>
         <s:Button x="181" y="5" label="$" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="4"/>
         <s:Button x="225" y="5" label="%" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="5"/>
         <s:Button x="269" y="5" label="^" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="6"/>
         <s:Button x="313" y="5" label="&" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="7"/>
         <s:Button x="357" y="5" label="*" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="8"/>
         <s:Button x="401" y="5" label="(" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="9"/>
         <s:Button x="445" y="5" label=")" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="0"/>
         <s:Button x="489" y="5" label="_" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="-"/>
         <s:Button x="533" y="5" label="+" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="="/>
         <s:Button x="577" y="5" label="Backspace" height="43" width="80" fontSize="11" fontWeight="bold" click="backspace_clickHandler(event)"/>
         <s:Button x="5" y="48" label="Tab" height="43" width="67" fontSize="12" fontWeight="bold" click="tab_clickHandler(event)"/>
         <s:Button x="72" y="48" label="Q" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="q"/>
         <s:Button x="116" y="48" label="W" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="w"/>
         <s:Button x="160" y="48" label="E" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="e"/>
         <s:Button x="204" y="48" label="R" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="r"/>
         <s:Button x="248" y="48" label="T" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="t"/>
         <s:Button x="292" y="48" label="Y" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="y"/>
         <s:Button x="336" y="48" label="U" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="u"/>
         <s:Button x="380" y="48" label="I" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="i"/>
         <s:Button x="424" y="48" label="O" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="o"/>
         <s:Button x="468" y="48" label="P" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="p"/>
         <s:Button x="512" y="48" label="{" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="["/>
         <s:Button x="556" y="48" label="}" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="]"/>
         <s:Button x="600" y="48" label="|" height="43" width="57" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="\"/>
         <s:Button x="5" y="91" label="CapsLock" height="43" width="80" fontSize="12" fontWeight="bold" click="caps_clickHandler(event)"/>
         <s:Button x="85" y="91" label="A" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="a"/>
         <s:Button x="129" y="91" label="S" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="s"/>
         <s:Button x="173" y="91" label="D" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="d"/>
         <s:Button x="217" y="91" label="F" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="f"/>
         <s:Button x="261" y="91" label="G" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="g"/>
         <s:Button x="305" y="91" label="H" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="h"/>
         <s:Button x="349" y="91" label="J" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="j"/>
         <s:Button x="393" y="91" label="K" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="k"/>
         <s:Button x="437" y="91" label="L" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="l"/>
         <s:Button x="481" y="91" label=":" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY=";"/>
         <s:Button x="525" y="91" label=""" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="'"/>
         <s:Button x="569" y="91" label="Enter" height="43" width="88" fontSize="24" fontWeight="bold" click="enter_clickHandler(event)"/>
         <s:Button x="5" y="134" label="Shift" height="43" width="106" fontSize="24" fontWeight="bold" click="shift_clickHandler(event)"/>
         <s:Button x="111" y="134" label="Z" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="z"/>
         <s:Button x="155" y="134" label="X" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="x"/>
         <s:Button x="199" y="134" label="C" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="c"/>
         <s:Button x="243" y="134" label="V" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="v"/>
         <s:Button x="287" y="134" label="B" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="b"/>
         <s:Button x="331" y="134" label="N" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="n"/>
         <s:Button x="375" y="134" label="M" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="m"/>
         <s:Button x="419" y="134" label="<" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY=","/>
         <s:Button x="463" y="134" label=">" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="."/>
         <s:Button x="507" y="134" label="?" height="43" width="44" fontSize="24" fontWeight="bold" click="keyboard_clickHandler(event)" label.PRIMARY="/"/>
         <s:Button x="551" y="134" label="Shift" height="43" width="106" fontSize="24" fontWeight="bold" click="shift_clickHandler(event)"/>
     </s:Group>
</s:Application>
thanks in advance,
saran r

How to Subscribe to Outlook Calendar in Group WIKI Calendar

Ok, here's what I've been trying to figure out how to do for about a year. Our small office uses PC's with Outlook as our Calendar. We are not on Exchange Server. We are using Mac Mini Snow Leopard Server ver. 10.6.8. I'm trying to figure out a way so that our office can look at one central calendar and see individual calendars for each of the users. I don't want all the users to have their events/appointments on 1 calendar because then you can't tell whose event/appointment it is.   I've setup a Group WIKI and have activated the Calendar and have a group consisting of the attorneys assigned to the Group. Outlook 10 can publish its calendar as to a webdav server. In fact I'm able to subscribe to my Outlook Calendar once its been published in the iCal client on the Snow Leopard server. It updates in both directions when changes are made. The problem is that when I go into the Group WIKI Calendar, although I can create calendars there and then PUBLISH them so they can be Subscribed to in either iCal or in Outlook 2010, I can't figure out how to SUBSCRIBE to a webdav/caldav calendar, ie. the Outlook 2010 that's been published, in the WIKI Calendar. Thanks for your help.

Hello,
I'm afraid I'm not familiar with the specific intricacy of your situation (a hosted domain at Outlook.com), and so do not know if indeed that is causal to your issues. But perhaps a workaround will be useful? For example, if you indeed use your hosted domain for your email, but create a true Outlook.com account for the use of only Calendar and Contact synchronization, then that might work?
You can find complete instructions here:
http://supportforums.blackberry.com/t5/General-BlackBerry-10-Smartphone/How-To-OTA-Sync-BB10-and-non...
For your email account, you simply use the domain they are hosting, and for Contacts/Calendar, the true Outlook.com account that you create for that purpose.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

How To use fckeditor HTML with flex

I am using coldfusion server technlogy.
I am trying make demo site Flex with coldfusion.
I want to know how to use html code with my mxml application.
Privious i am using FCK TEXT editor with my HTML File
Currently flex have small text editor But i need full text
editor with all feture which include FCK Editor
Please let me know how to integrate Fck Editor with flex
application . Or any html file with Flex Application

Flex has a very limited support for HTML, thus you cannot
create a full featured editor within flex. The only work arounds I
have seen are done using IFRAME's over your app.
Not sure if it an option, however Apollo does a good job of
addressing this issue by allowing full feature Javascript and HTML.
Allen

How to add Column to Adobe flex mx:DataGrid in mxml and/or actionsctpt?

I have simple mxml code
<mx:DataGrid id="DGG"
             editable="true">
    <mx:dataProvider>
        <mx:Object scheduledDate="4/1/2006"/>
    </mx:dataProvider>
</mx:DataGrid>
<mx:Button id="SetBut"
           label="Set Array as Data Provider"
           click="SetDP(); AddBut.visible = true;"
           x="100.5"
           y="164"
           width="211"/>
<mx:Button id="AddBut"
           label="Add a column!"
           click="AddCol();"
           x="100.5"
           y="194"
           width="211"
           visible="false"/>
<mx:Script>
    <![CDATA[
        import mx.controls.dataGridClasses.DataGridColumn;
        import mx.collections.ArrayCollection;
        [Bindable]
        public var MyAC:ArrayCollection=new ArrayCollection([{scheduledDate: "4/1/2006", homeTeam: "Chester Bucks"}]);
        public function SetDP():void
            DGG.dataProvider=MyAC
        public function AddCol():void
            MyAC.addItem({scheduledDate: "4/5/2007", homeTeam: "Long Valley Hitters", Umpire: "Amanda Hugenkis"});
            DGG.columns.push(new DataGridColumn("Umpire"));
    ]]>
</mx:Script>
I want to add rows to my table datagrid how to do such thing?
How to add Column to Adobe flex mx:DataGrid in mxml and/or actionsctpt?
(You can put this code in Flash or AIR app - it will compile with no errors, but will not add any columns=( )

Change this:
             public function SetDP():void
                DGG.dataProvider=MyAC
                MyAC.addItem({scheduledDate: "4/5/2007", homeTeam: "Long Valley Hitters", Umpire: "Amanda Hugenkis"});
            public function AddCol():void
                var dgc:DataGridColumn = new DataGridColumn("Umpire");
                var ca:Array = DGG.columns;
                ca.push(dgc);
                DGG.columns = ca;
Dany

How to create a plugin for Flex Builder

Does anyone know where the documentation is located for developing plug-ins for Flex Builder? I know you can create plugins for Eclipse, but I haven't seen how you can import them into Flex builder without having it in the Eclilpse Marketplace.

Hi,
There are some plugin examples in osmf source code on sourceforge. You can start from an existing plugin to learn the basics - it will be a little easier than starting from scratch.
What should your plugin do?

How to create multiple pages using flex application.

Hi all,
i am doing flex application which contains 5 different
pages,
to do this i have used viewstack component to navigate
between the pages.
this is working fine if all my pages are of same size. each
page as different background image.
but i have to create pages with different sizes.
my first and second page are small and remaining pages are
big.
when i navigate to 3rd or 4th page, it is showing scrollbar
inside swf.
but i want scrollbar for browser window not inside my swf
anyone please guide me how to create pages in flex
application.
i have one more doubt, if my page contains some html links ,
how to open those links,
is it posible to open the link in new window.
please help me , i have no idea how to create web
applications using flex
Thanks in advance
regards
avanthika

Hi inlineblue,
Thanks for your reply,
you asked about sample code,
following is my sample code.
In my Application mxml file, i am loading all custom
components for each page.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
xmlns="*"
horizontalAlign="center" verticalAlign="top"
styleName="plain"
backgroundColor="#FFFFFF"
creationComplete="init()" width="780" height="594" >
<mx:Script>
<![CDATA[
//navigating to next page
public function showNextStep(newIndx:int):void{
vs.selectedIndex=newIndx;
//navigating to previous page
public function showPreviousStep(newIndx):void{
vs.selectedIndex=newIndx
]]>
</mx:Script>
<mx:ViewStack id="vs" paddingLeft="0" height="100%"
width="100%" >
<mx:Canvas id="s1" label="step1"
backgroundImage="assets/Step1.jpg" >

<mx:HBox paddingLeft="8" width="780" height="548">
</mx:HBox>
<mx:Button alpha="0" buttonMode="true" x="697" y="18"
click="showNextStep(1)" width="72" height="24" />
<mx:Button alpha="0" buttonMode="true" x="697" y="508"
width="72" click="showNextStep(1)" height="24"/>
</mx:Canvas>
<step2 id="s2" label="Step2" hideEffect="{blurImage}"
showEffect="{unblurImage}" />
<step3 id="s3" label="Step3" hideEffect="{blurImage}"
showEffect="{unblurImage}" />
<step4 id="s4" label="Step4" hideEffect="{blurImage}"
showEffect="{unblurImage}" />
<step5 id="s5" label="Step5" hideEffect="{blurImage}"
showEffect="{unblurImage}" />
</mx:ViewStack>
</mx:Application>
// following is the page2 (step2) component code
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()"
backgroundImage="assets/Step2.jpg" width="778" height="600"
>

<mx:HBox horizontalAlign="left" paddingLeft="5"
height="511" width="768">
</mx:HBox>
<mx:Button alpha="0" buttonMode="true" x="648" y="6"
click="this.parentApplication.showPreviousStep(0)" width="61"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="711" y="6"
click="this.parentApplication.showNextStep(2)" width="53"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="651" y="529"
width="58" click="this.parentApplication.showPreviousStep(0)"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="712" y="528"
width="54" click="this.parentApplication.showNextStep(2)"
height="24"/>
</mx:Canvas>
// following is the code for page3 (step3) component
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()"
backgroundImage="assets/Step3.jpg" >

<mx:VBox width="763" height="668">
</mx:VBox>
<mx:Button alpha="0" buttonMode="true" x="644" y="10"
click="this.parentApplication.showPreviousStep(1)" width="61"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="708" y="10"
click="this.parentApplication.showNextStep(3)" width="53"
height="24"/>
<mx:Button alpha="0" buttonMode="true" label="Back"
x="625" y="590" width="58"
click="this.parentApplication.showPreviousStep(1)" height="24"/>
<mx:Button alpha="0" buttonMode="true" x="694" y="590"
width="68" click="this.parentApplication.showNextStep(3)"
height="24"/>
</mx:Canvas>
// following is code for page4 (step 4),
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()"
backgroundImage="assets/Step4.jpg" >

<mx:VBox width="762" height="792">

</mx:VBox>
<mx:Button alpha="0" buttonMode="true" x="644" y="15"
click="this.parentApplication.showPreviousStep(2)" width="61"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="708" y="16"
click="this.parentApplication.showNextStep(4)" width="53"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="644" y="710"
width="58" click="this.parentApplication.showPreviousStep(2)"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="703" y="710"
width="54" click="this.parentApplication.showNextStep(4)"
height="24"/>
</mx:Canvas>
// Following is code for Page 5 (step 5 ) component.
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()"
backgroundImage="assets/Step5.jpg" width="778"
height="600">

<mx:VBox paddingLeft="170" paddingTop="170" width="778"
height="522">
</mx:VBox>
<mx:Button alpha="0" buttonMode="true" x="654" y="41"
click="this.parentApplication.showPreviousStep(3)" width="72"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="654" y="486"
width="72" click="this.parentApplication.showPreviousStep(3)"
height="24"/>
</mx:Canvas>
I am getting vertical scrollbar for page3 and page4,
please tell me how to avoid this, Is their any other method
to do this.
Following is the link for my above code
http://www.emantras.com/flexdemo/sample.html
in this application one more problem is also their,
background image loads very slow, before it loads all the flex
components will load. So when you open this please wait till
background image loaded, to move to next and back pages.
Thanks for your time and consideration.
Regards
Avanthika

How to embed Passcode mechanism in flex application

Hi,
I'm developing a flex based application. Almost everything is done. Now I would like to let the users to install this product only for 3 times on their machine.
For this, Passcode mechanism is a good idea. The user has to enter this passcode which went alongwith the CD / DVD product after installing the product.
They shall use this code for only 3 times. After that the product should not accept this passcode. Could anyone suggest me how to accomplish this task in flex ?
Any tutorials for this ?
Thanks in advance.

The AIR desktop application is already made. The user will have to purchase the CD to install it. He/She should have to input the Code which went along with the CD while installing the product.
He / She should be able to use this CD only for 3 times in the same computer OR use this CD in 3 different computers for 1 time in each.
Simply it should be used only for 3 times.
Could anyone suggest me how to accomplish this task ?

How to upload newsletter templates to website?

I cannot figure out how to add newsletter templates to my website. I can download to file on my computer but cannot upload it to website and don't know where I should go to even upload it. Any ideas or tips?

You can use a Blank Newsletter template and then edit the HTML code and Paste your own code in the HTML view of the Newsletter Template and Upload all the associated file like CSS and Images.
If you are a Partner user, you can upload the Newsletter template from the partner portal -> Tools-> Newsletter Template
Hope this Helps.
Regards

How to find function code for buttons on toolbar in oops alv

Hi experts,
I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALV

Hi Prakash,
-->First you have to set the pf status in your alv program by,
{FORM pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'FIRST'.
ENDFORM.                    "PF_STATUS}
-->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
      i_callback_pf_status_set          = 'PF_STATUS'}
*-->Then doble click on that pf status,
From the menu bar, select Extras->Adjust Template->List Viewer,
This will give you the existing statndard gui status of the program*
->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
      i_callback_user_command           = 'COMM'
And make a subroutine of the name 'COMM'i.e,
FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA: okcode TYPE sy-ucomm.
okcode = ucomm.
CASE okcode.
    WHEN 'REF'.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        titel         = 'MANSI'
        txt1          = 'CREATED BY'
        txt2          = SY-UNAME
      TXT3          = ' '
      TXT4          = ' '
endcase.
Hope it helps you
Regrds
Mansi

How to find Transaction code from Report/program name ?

Dear all,
How to find Transaction code if i know Report/program name ?

Hi,
In se 38 when u open ur program,in the application toolbar u have a button beside the where-used list button as display object list.on clicking this button,a window will be opened at the left most corner for repository browser,in this u can find any tranasctions,fileds,screens,dictionary structures defined for the program.
if any transaction is created for the program u can find it under the transaction folder.
revert back for further queries.
Regards,
Sravanthi

How to print claim code for envy 5530 without connecting to internet?

how to print claim code for hp envy 5530 without connecting to internet. We do not have wireless internet and we are trying to set up the eprint app for our samsun android phones and ipad. We need to print off the claim code from the printer but it seems we need to have internet for that. is there any way around that?
Thanks

Hi,
You have to, without connecting to the internet, the claim code (if you can get one) is useless.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to subscribe newsletter code in flex

Similar Messages

Maybe you are looking for