How to supply input to a PreparedStatement using an IN(?) clause

I am trying to execute a query within a PreparedStatement although I can't figure out how to supply the parameter to the PreparedStatement. The query looks like:
DELETE FROM MyTable WHERE MyColumn IN (?);
I am now looking for a way to supply a list of IDs as the parameter for the ?. What I have is an array of int but I can't figure out how to make it through.
Thanks in advance

MYSQL 4 supports stored procedures.
http://dev.mysql.com/doc/mysql/en/stored-procedures.html
Did you read that link? The following is one of the very first lines....
Stored procedures and functions are a new feature in MySQL version 5.0
And doing a little research one determines that 5.0 is still in beta.
Of course it helps to have a little history as well, but either one has to visit the site over a period of time or really dig in. If one does one learns that 5.0 has been in beta for at least three years and perhaps longer.

Similar Messages

How to write a SQL Query without using group by clause

Hi,
Can anyone help me to find out if there is a approach to build a SQL Query without using group by clause.
Please site an example if is it so,
Regards

I hope this example could illuminate danepc on is problem.
CREATE or replace TYPE MY_ARRAY AS TABLE OF INTEGER
CREATE OR REPLACE FUNCTION GET_ARR return my_array
as
     arr my_array;
begin
     arr := my_array();
     for i in 1..10 loop
          arr.extend;
          arr(i) := i mod 7;
     end loop;
     return arr;
end;
select column_value
from table(get_arr)
order by column_value;
select column_value,count(*) occurences
from table(get_arr)
group by column_value
order by column_value;And the output should be something like this:
SQL> CREATE or replace TYPE MY_ARRAY AS TABLE OF INTEGER
2 /
Tipo creato.
SQL>
SQL> CREATE OR REPLACE FUNCTION GET_ARR return my_array
2 as
3   arr my_array;
4 begin
5   arr := my_array();
6   for i in 1..10 loop
7    arr.extend;
8    arr(i) := i mod 7;
9   end loop;
10   return arr;
11 end;
12 /
Funzione creata.
SQL>
SQL>
SQL> select column_value
2 from table(get_arr)
3 order by column_value;
COLUMN_VALUE
           0
           1
           1
           2
           2
           3
           3
           4
           5
           6
Selezionate 10 righe.
SQL>
SQL> select column_value,count(*) occurences
2 from table(get_arr)
3 group by column_value
4 order by column_value;
COLUMN_VALUE OCCURENCES
           0          1
           1          2
           2          2
           3          2
           4          1
           5          1
           6          1
Selezionate 7 righe.
SQL> Bye Alessandro

How to unlock a row if i use FOR UPDATE clause

In procedure if we use FOR UPDATE clause, it will lock particular row and allow only one client to update whereas other client can only fetch data in the same row at that time.
My question is when will it unlock the row, what should we do to unlock the row while writing procedure. Take this example here im using FOR UPDATE clause for client_count, when ll it unlock that particular row in this procedure.
create or replace PROCEDURE newprocedur(inMerid IN VARCHAR2,outCount OUT NUMBER) AS
CURSOR c1 IS
select CLIENT_COUNT from OP_TMER_CONF_PARENT where MER_ID = inMerid FOR UPDATE OF CLIENT_COUNT;
BEGIN
Open c1;
loop
fetch c1 into outCount;
exit when c1%NOTFOUND;
outCount:=outCount+1;
update OP_TMER_CONF_PARENT set CLIENT_COUNT = outCount where current of c1;
end loop;
close c1;
END;

Hi,
Basically you are incrementing client_count by 1 , Why you have to fetch row one by one and update? you could just finish that in a single update
UPDATE OP_TMER_CONF_PARENT
SET CLIENT_COUNT = CLIENT_COUNT+1
WHERE MER_ID = inMerid This will increment client_count of all rows by one for the given mer_id;
After updating you have to make the changes permanent so that other users will see the changes you have made.
To lock the row before update you can use same select statement in you cursor
SELECT CLIENT_COUNT
FROM OP_TMER_CONF_PARENT
WHERE MER_ID = inMerid FOR UPDATE OF CLIENT_COUNT;You can further modify the procedure to let other users know if the row is being updated.
Regards
Yoonas

How to pass input parameters to ZRFC using sap connector 3.0

Hi,
In the connector 2.0 we were passing parameters (vendor# as input) to rfc as ( eg: rfc_name(I_vendor, E_VendorTBL) and able get the results in the output table .
How do we do this using new NCO3.0.
Thanks,
Rajender

S0008226571 wrote:>
> I have implemented an example similar to the above which stores the results of a table in a .net DataTable. I am trying to bind the DataTable to a DataGridView but the DataGridView is simply blank.
>
>
>
DataTable dt = svc.getTableData("crmd_orderadm_h");
>
>                 bindingSource.DataSource = dt;
>                 dataGridView1.DataSource = bindingSource;
>
>
> Any ideas on why the DataGridView is empty?
For the benefit of others here, I resolved the problem by examining the properties of the datagridview control. In this case, the datagridview control binding property was being set in the visual studio designer and for some reason was not able to be set at runtime. I removed the binding property in the visual studio property window and the problem was resolved.
Thanks for those who contributed answers to this issue.
Edited by: Mike Powell on Mar 1, 2011 3:30 PM

How to write a java function for use in where clause in SQL statement

Hi,
Does anyone know a good tutorial on how to write and include a Java class/function into Oracle.
I'd like to write mathematical function to use in my queries, but the resources available in PL/SQL are very limited.
Many thanx

Pim,
I see you got an answer in the PL/SQL forum.
But in case you haven't seen it, perhaps this Web page will help:
http://www.oracle.com/technology/tech/java/jsp/index.html
Good Luck,
Avi.

Output not sorted when using group by clause

Recently we migrated our application from Forms5 to Forms10g and database from 7.3.2 to 10gR2.
More than 400 applications using sql stmt with "group by" clause and without "order by".
In Earlier version of oracle 7.3.2 "group by" clause in SQL stmt sorts the output by order of the column in the "group by"
stmt, where new version of oracle 10g (10.2.0.1.0 - 64bit Production) doesnt behave like older version.
eg select div_cd,dept_cd,count(*) from class group by div_cd,dept_cd
Output of the above query in Oracle7
DIV_CD DEPT_CD COUNT(*)
0 1 120
0 9 131
1 4 938
1 6 1
4 1 1490
5 2 59
6 6 848
6 9 295
8 1 45
9 5 19
Output of same query in Oracle10g
DIV_CD DEPT_CD COUNT(*)
0 6 120
0 9 131
4 1 1490
6 9 295
8 1 45
9 5 19
1 4 938
1 6 1
5 2 59
6 6 848
My question is
a) Does the oracle behave in that manner?.
b) if so, Any patch set available for this?
c) if no patch set how to resolve this issue.
if i use "order by" clause
along with group by then i can get the output how i want.
BUt problem is more than 400 applications (forms) using above method.
Identify Forms/Reports and rectifing is a tedious job.
Anyone can give me a good solution to solve the above issue

Group By does not, and never has guaranteed order. Just because it happened that way on the past does not mean it will continue to do so.
In the past, the algorithm used for Group By invoked a sort. It was convenient for the system to simply dump the output in that resulting order. These days, Group By could also be accomplished using a hash algorithm. Walking through the hash can easily result in a completely different ordering, as you have seen.
Your problem is that the assumptions made previously are now invalid. Oracle is still working correctly. No patch, but you might be able to work around it by crippling your database and using the COMPATIBLE parameter (although the official lower limit is 9.2.0)

HT4437 Trying to use airplay from my iPad to my TV.........when airplay code comes on screen how do I input the number on my iPad?

I am trying to use my iPad with Airplay on my TV. When I attempt to link up with TV a code appears on the screen. Where and how do I input the code?

Setup Apple TV with iPad
1. Setup Apple TV
(a) Connect cables and power cord
(b) Turn on TV and select Input
(c) Configure Apple TV
2. Setup Home Sharing on iPad
Settings>Music/Video>Home Sharing
3. Setup Home Sharing on Apple TV
Settings>Computer>Turn on Home Sharing. Enter Apple ID and Password
4. Pair Apple TV with Remote Control
General>Remotes>Pair Apple Remote

Digital audio input via mini jack/toslink from ADA, monitored via USB audio output... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

Digital audio input via mini jack/toslink from ADA converter, monitored via USB audio output to amplifier... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

You can output audio thru HDMI, with appropriate adapter.
You can use additional cheap external usb audio for monitoring.

My HD TV has two HDMI inputs which are being used by a home theater system and my RCN cable box. i want to be able to use my appleTV as well as those but do not have another HDMI input. How can i connect it so that i can use any 1 of the 3 at any time?

My HD TV has two HDMI inputs which are being used by a home theater system and my RCN cable box. i want to be able to use my appleTV as well as those but do not have another HDMI input. How can i connect it so that i can use any 1 of the 3 at any time?

Get an HDMI switcher. Plug in the ATV directly to the TV and then use the switcher on the other input.
Example
http://www.amazon.com/Ultra-High-Performance-Switcher-Switch/dp/B0015YWKYY/ref=s r_1_1?ie=UTF8&qid=1316918064&sr=8-1

How to hide input fields on selection screen using variant attribute

Hello all,
I want to know how to hide input fields on selection screen using variant attribute conpletely.
As you know, when setting the attribute of variant "Hide field" checked, the field is temporarily hidden, but when clicking "All Selections(F7)" button on the selection screen, the fileds become appeared.
I want to hide the field completely. Di you know how to do ?
Thank you for your support.
Regards,
Hideki Kozai

Use this attribute hide field and save the variant. Then create transaction for this program setting default variant for parameter Start with variant . The user who runs it will have it by defualt set.
Otherwise
in PBO simply use LOOP at screen and output = 0 for this field. This will ensure that field is invisible in any case.
Regards
Marcin

Can i use the iq526 touchscreen as a monitor for another computer? if so, how do i input the video?

can i use the iq526 touchscreen as a monitor for another computer? if so, how do i input the video?
This question was solved.
View Solution.

You know, this is just a thought. I'm not sure the differences between the iq526 and iq770, but as I was looking around I found this article. I don't know if it'll help, but you might want to take a look. Evidently someone figured out how to use the HP touchsmart as an external monitor for his Dell laptop.
GeorgeFN
I work on behalf of HP.

I have transefer function like (1/(s^2+s+5)) and i have a square wave input , i want to use this transfer function with this input to see the output , how can i do that , with example please.

i need to know also how to represent this transfer function in labview, try to send me example. answer me at my mail

"st" wrote:
> answer me at my mail
give a valid e-mail first, and your name, we don't like to help anonymous
people
> try to send me example.
how much do you pay ?
> i have transefer function like (1/(s^2+s+5)) and i have a square wave
> input , i want to use this transfer function with this input to see
> the output , how can i do that
First you have to know what you are doing, like an engineer : you have a
Laplace, continuous time transfer function but LabView handles discrete
signals only. Use matlab/simulink if you want to simulate continuous time
systems easily...
If you definitely want to use LabView, the first step is to discretize your
continuous-time transfer function, i.e. decide a sampling rate and convert
it to a "z transfor
m". Then you can directly use the "IIR Filter.vi" as I
said earlier.
Philippe Guglielmetti - www.dynabits.com me at my mail

How can I re-install Snow leopard having installed Lion? The disk supplied states that I cannot use the version of 'Install Mac OS X'...HELP!

How can I re-install Snow leopard having installed Lion? The disk supplied states that I cannot use the version of 'Install Mac OS X'...HELP!

None of the instructions usually given for downgrading seems to mention the fact that you will lose some data in built-in applications, including at least Mail. When you installed Lion, your Mail database was converted from the format used by Snow Leopard's Mail to that used by Lion's Mail. There is no way to reverse that conversion. Therefore, you will lose your entire Mail database. If your messages are all stored on a remote server, that may not be an insurmountable problem, but otherwise you'll have to restore from the last backup you made before the upgrade, and then you'll still lose all changes to the database made since that time.
Another fact not often mentioned is that downgrading is usually the worst possible solution to a problem with Lion. But that's the answer to a question you didn't ask.

How to set input/output "use" attribute in the WSDL file of BPEL process?

Hello,
I have a BPEL process that I want to deploy it as an RPC web service. I want to access it from a Java module (via an automatic generated Java stub from the WSDL file exposed by the BPEL process).
I wrote manually the corresponding WSDL file for my BPEL process, where I stipulated for the operations exposed by my process ( in <soap:binding> tag) the value of the attribute "style" to "rpc". Also, for each <input> and <output> of the operations (inside the <operation> tag), I set manually the attributes "use" to the values "encoded". Something like this:
<operation name="getCustomers">
<soap:operation style="rpc" soapAction="getCustomers"/>
<input>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="Trial"/>
</input>
<output>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="Trial"/>
</output>
</operation>
The issue is that, when the BPEL process is built and deployed, the WSDL file generated automatically by BPEL (based on the one manually writen) set the values of the "use" attributes to "literal". This is what is generated:
<operation name="getCustomers">
<soap:operation style="rpc" soapAction="getCustomers" />
<input>
<soap:body use="literal" namespace="http://acm.org/samples" />
</input>
<output>
<soap:body use="literal" namespace="http://acm.org/samples" />
</output>
</operation>
Is there any chance to keep the original values (written by hand) for the "use attributes?
Many thanks in advance!
Regards,
Marinel

I am not sure I understand your question. If you want all your BPEL service to be rpc still by default, you can change the templates: C:\eclipse\plugins\bpelz_0.9.XXX\templates.
The BPEL PM engine support both style of invocation.
I hope this helps. -Edwin

How to change System Key Board Default input language(registry entry) using c# code

Hi All
Please help me to write a small console application which helps to change keyBoard default input language in registry using c# code (Manually we can change as follows: Control Panel\All Control Panel Items\Region and Language\ KeyBoards and languages\Change
KeyBoards\Default Input Language)
Note: once system rebooted, English language should not be selected by default. Previously selected language has to be retained after system rebooting

Hi
Avatar
Would you mind letting us know the result of the suggestion?
I temporarily mark
cedric’s last response as an answer. You can unmark
it if they provide no help.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to supply input to a PreparedStatement using an IN(?) clause

Similar Messages

Maybe you are looking for