How to set input/output "use" attribute in the WSDL file of BPEL process?

Hello,
I have a BPEL process that I want to deploy it as an RPC web service. I want to access it from a Java module (via an automatic generated Java stub from the WSDL file exposed by the BPEL process).
I wrote manually the corresponding WSDL file for my BPEL process, where I stipulated for the operations exposed by my process ( in <soap:binding> tag) the value of the attribute "style" to "rpc". Also, for each <input> and <output> of the operations (inside the <operation> tag), I set manually the attributes "use" to the values "encoded". Something like this:
<operation name="getCustomers">
<soap:operation style="rpc" soapAction="getCustomers"/>
<input>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="Trial"/>
</input>
<output>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="Trial"/>
</output>
</operation>
The issue is that, when the BPEL process is built and deployed, the WSDL file generated automatically by BPEL (based on the one manually writen) set the values of the "use" attributes to "literal". This is what is generated:
<operation name="getCustomers">
<soap:operation style="rpc" soapAction="getCustomers" />
<input>
<soap:body use="literal" namespace="http://acm.org/samples" />
</input>
<output>
<soap:body use="literal" namespace="http://acm.org/samples" />
</output>
</operation>
Is there any chance to keep the original values (written by hand) for the "use attributes?
Many thanks in advance!
Regards,
Marinel

I am not sure I understand your question. If you want all your BPEL service to be rpc still by default, you can change the templates: C:\eclipse\plugins\bpelz_0.9.XXX\templates.
The BPEL PM engine support both style of invocation.
I hope this helps. -Edwin

Similar Messages

How to set input delay and output delay when source Synchronous

ClkIN is the board clock which is connected to the FPGA. Clkif is the generated clock from ClkIN. The Device's clk come from Clkif. So, how to set input delay and output delay in this scene(within my understand, this is Source Synchronous)?
The example in many document, the input delay and output delay setting all refer to board clock(within my understand, this is System Synchronous). In that scene, the input delay max = TDelay_max + Tco_max; input delay min = Tdelay_min + Tco_min; the output delay max = Tdelay_max + Tsu; output delay min = Tdelay_min - Th.
So, I want to know how to set input/output delay in the Source Synchronous.
In system synchronous, I set input/output delay such as:
create_clock -period 20.000 -name ClkIN -waveform {0.000 10.000} [get_ports ClkIN]
create_generated_clock -name Clkif -source [get_pins cfg_if/clk_tmp_reg/C] -divide_by 2 [get_pins cfg_if/clk_tmp_reg/Q]
create_clock -period 40.000 -name VIRTUAL_clkif //make virtual clock
set_input_delay -clock [get_clocks VIRTUAL_clkif] -min 0.530 [get_ports DIN]
set_input_delay -clock [get_clocks VIRTUAL_clkif] -max 7.700 [get_ports DIN]
set_output_delay -clock [get_clocks VIRTUAL_clkif] -min -0.030 [get_ports DOUT]
set_output_delay -clock [get_clocks VIRTUAL_clkif] -max 1.800 [get_ports DOUT]
*******************************************************************************************

So, first. Architecturally, the clock that you forward to your external device should not come directly from the clock tree, but should be output via an ODDR with its D1 input tied to logic 1 and the D2 tied to logic 0. This guarantees minimal skew between the output data and the forwarded clock.
ODDR #(
.DDR_CLK_EDGE("OPPOSITE_EDGE"), // "OPPOSITE_EDGE" or "SAME_EDGE"
.INIT(1'b0), // Initial value of Q: 1'b0 or 1'b1
.SRTYPE("SYNC") // Set/Reset type: "SYNC" or "ASYNC"
) ODDR_inst (
.Q (Clkif_ff), // 1-bit DDR output
.C (ClkIN_BUFG), // 1-bit clock input
.CE (1'b1), // 1-bit clock enable input
.D1 (1'b1), // 1-bit data input (positive edge)
.D2 (1'b0), // 1-bit data input (negative edge)
.R (rst), // 1-bit reset
.S (1'b0) // 1-bit set
OBUF OBUF_inst (.I (Clkif_ff), .O (Clkif_out));
This generates an output clock that is the same frequency as your input clock. This is consistent with your drawing, but inconsistent with your constraints - is the forwarded clock a 50MHz clock or a 25MHz clock?
I will assume your ClkIN goes to a BUFG and generates ClkIN_BUFG. Your first constraint generates a 50MHz clock on the ClkIN port which will propagate through the BUFG to (among other places) this ODDR.
create_clock -period 20.000 -name ClkIN -waveform {0.000 10.000} [get_ports ClkIN]
Assuming your forwarded clock is supposed to be 50MHz, then your 2nd command is close to correct
create_generated_clock -name Clkif -source [get_pins cfg_if/ODDR_inst/C] -combinational [get_pins cfg_if/ODDR_inst/Q]
With this done, you have successfully described the forwarded clock from your design. This is the clock that goes to your device, and hence should be the clock which is used to specify your input and output constraints.
set_input_delay -clock [get_clocks Clkif] -min 0.530 [get_ports DIN]
set_input_delay -clock [get_clocks Clkif] -max 7.700 [get_ports DIN]
set_output_delay -clock [get_clocks Clkif] -min -0.030 [get_ports DOUT]
set_output_delay -clock [get_clocks Clkif] -max 1.800 [get_ports DOUT]
If you want to get fancier, you could try adding a set_clock_latency to the forwarded clock to account for the board propagation of the clock
set_clock_latency -source TDtrace2 [get_clocks Clkif]
(But I haven't experimented with clock latency on a generated clock and I don't know for a fact that it works).
Avrum

How to set up and use AirPlay

How to set up and use AirPlay

Welcome to the Apple Community.
AirPlay; When watching suitable content on the iPad, tap the screen to bring up the controls, tap the AirPlay icon and select the Apple TV. The content will then stream to the Apple TV.
Mirroring; Double tap the home screen button, swipe the application panel to the right, tap the AirPlay icon and choose the Apple TV. The iPad screen will then be streamed to the Apple TV.

How to set proxy authentication using java properties at run time

Hi All,
How to set proxy authentication using java properties on the command line, or in Netbeans (Project => Properties
=> Run => Arguments). Below is a simple URL data extract program which works in absence of firewall:
import java.io.*;
import java.net.*;
public class DnldURLWithoutUsingProxy {
   public static void main (String[] args) {
      URL u;
      InputStream is = null;
      DataInputStream dis;
      String s;
      try {
          u = new URL("http://www.yahoo.com.au/index.html");
         is = u.openStream();         // throws an IOException
         dis = new DataInputStream(new BufferedInputStream(is));
         BufferedReader br = new BufferedReader(new InputStreamReader(dis));
      String strLine;
      //Read File Line By Line
      while ((strLine = br.readLine()) != null)      {
      // Print the content on the console
          System.out.println (strLine);
      //Close the input stream
      dis.close();
      } catch (MalformedURLException mue) {
         System.out.println("Ouch - a MalformedURLException happened.");
         mue.printStackTrace();
         System.exit(1);
      } catch (IOException ioe) {
         System.out.println("Oops- an IOException happened.");
         ioe.printStackTrace();
         System.exit(1);
      } finally {
         try {
            is.close();
         } catch (IOException ioe) {
}However, it generated the following message when run behind the firewall:
cd C:\Documents and Settings\abc\DnldURL\build\classes
java -cp . DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:452)
at java.net.Socket.connect(Socket.java:402)
at sun.net.NetworkClient.doConnect(NetworkClient.java:139)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:402)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:618)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:306)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:267)
at sun.net.www.http.HttpClient.New(HttpClient.java:339)
at sun.net.www.http.HttpClient.New(HttpClient.java:320)
at sun.net.www.http.HttpClient.New(HttpClient.java:315)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:510)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:487)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:615) at java.net.URL.openStream(URL.java:913) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
I have also tried the command without much luck either:
java -cp . -Dhttp.proxyHost=wwwproxy -Dhttp.proxyPort=80 DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.io.IOException: Server returned HTTP response code: 407 for URL: http://www.yahoo.com.au/index.html
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1245) at java.net.URL.openStream(URL.java:1009) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
All outgoing traffic needs to use the proxy wwwproxy (alias to http://proxypac/proxy.pac) on port 80, where it will prompt for valid authentication before allowing to get through.
There is no problem pinging www.yahoo.com from this system.
I am running jdk1.6.0_03, Netbeans 6.0 on Windows XP platform.
I have tried Greg Sporar's Blog on setting the JVM option in Sun Java System Application Server (GlassFish) and
Java Control Panel - Use browser settings without success.
Thanks,
George

Hi All,
How to set proxy authentication using java properties on the command line, or in Netbeans (Project => Properties
=> Run => Arguments). Below is a simple URL data extract program which works in absence of firewall:
import java.io.*;
import java.net.*;
public class DnldURLWithoutUsingProxy {
   public static void main (String[] args) {
      URL u;
      InputStream is = null;
      DataInputStream dis;
      String s;
      try {
          u = new URL("http://www.yahoo.com.au/index.html");
         is = u.openStream();         // throws an IOException
         dis = new DataInputStream(new BufferedInputStream(is));
         BufferedReader br = new BufferedReader(new InputStreamReader(dis));
      String strLine;
      //Read File Line By Line
      while ((strLine = br.readLine()) != null)      {
      // Print the content on the console
          System.out.println (strLine);
      //Close the input stream
      dis.close();
      } catch (MalformedURLException mue) {
         System.out.println("Ouch - a MalformedURLException happened.");
         mue.printStackTrace();
         System.exit(1);
      } catch (IOException ioe) {
         System.out.println("Oops- an IOException happened.");
         ioe.printStackTrace();
         System.exit(1);
      } finally {
         try {
            is.close();
         } catch (IOException ioe) {
}However, it generated the following message when run behind the firewall:
cd C:\Documents and Settings\abc\DnldURL\build\classes
java -cp . DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:452)
at java.net.Socket.connect(Socket.java:402)
at sun.net.NetworkClient.doConnect(NetworkClient.java:139)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:402)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:618)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:306)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:267)
at sun.net.www.http.HttpClient.New(HttpClient.java:339)
at sun.net.www.http.HttpClient.New(HttpClient.java:320)
at sun.net.www.http.HttpClient.New(HttpClient.java:315)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:510)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:487)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:615) at java.net.URL.openStream(URL.java:913) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
I have also tried the command without much luck either:
java -cp . -Dhttp.proxyHost=wwwproxy -Dhttp.proxyPort=80 DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.io.IOException: Server returned HTTP response code: 407 for URL: http://www.yahoo.com.au/index.html
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1245) at java.net.URL.openStream(URL.java:1009) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
All outgoing traffic needs to use the proxy wwwproxy (alias to http://proxypac/proxy.pac) on port 80, where it will prompt for valid authentication before allowing to get through.
There is no problem pinging www.yahoo.com from this system.
I am running jdk1.6.0_03, Netbeans 6.0 on Windows XP platform.
I have tried Greg Sporar's Blog on setting the JVM option in Sun Java System Application Server (GlassFish) and
Java Control Panel - Use browser settings without success.
Thanks,
George

Once and for all: How to set up and use SSH

Yes, I know ssh has been discussed on and off, but never in its entirety; and yes, there are step by step instructions on the www, but at one point or another they skip a crucial instruction that would be necessary for unix-dummies (e.g. how to save and close the nano-editor in Terminal). So, please pardon my question:
There are several points I'd like to ask for ssh-connecting two macs on a local network:
1) In terminal-file-"connect to server" you can ask for an ssh connection to be set up. For this to work, do I need to create private and public keys first? If so, how? Please point me to a reliable and step-by-step instruction site.
There are some free ssh-utilities out there, but their documentation is just not helpful enough for a UNIX-dummy.
2) Apparently I managed to connect via ssh once (from the terminal, see point 1) to a local server (allowing remote connection set to ON at the server). But then, when I connected to that server from the client's finder and tried to get into my user account on that server it told me that no secure connection could be established. What's wrong here? Do I have to continue working from within the terminal to use this connection? That would be difficult for an average MacUser.
3) What is the security advantage of an SSH connection on a local wireless network (Airport Base Station) over WPA2, if at all?
4) And how to set up an ssh-connection over the internet cloud to safely build a remote control/desktop sharing connection, e.g., a friend's Mac when she has a problem?
Thanks for your consideration.

First I'm not sure what your goals are.
1) In terminal-file-"connect to server" you can ask for an ssh connection to be set up. For this to work, do I need to create private and public keys first?
If you have ssh keys, you can do this without passwords. If you have not exchanged keys with the remote system, you will be asked for the password of the user you are attempting to login as.
If so, how? Please point me to a reliable and step-by-step instruction site. There are some free ssh-utilities out there, but their documentation is just not helpful enough for a UNIX-dummy.
Log into the remote system. This could be via ssh.
On the remote system, run the following command to generate an ssh key for that remote system:
ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/Users/username/.ssh/id_rsa): <<take default>>
Created directory '/Users/username/.ssh'.
Enter passphrase (empty for no passphrase): <<enter nothing>>
Enter same passphrase again: <<enter nothing again>>
Your identification has been saved in /Users/username/.ssh/id_rsa.
Your public key has been saved in /Users/username/.ssh/id_rsa.pub.
The key fingerprint is:
aa:bb:cc:dd:ee:ff:gg:hh:ii:jj:kk:ll:mm:nn:oo:pp [email protected]
This will generate an ssh key for the remote system. This could be any system that support ssh, such as a Unix system, or another Mac.
Copy the id_rsa.pub file from the remote system to your Mac. When I say "your Mac" I mean the one that you want to make the ssh connection from. The id_rsa.pub is found in the remote system's ~username/.ssh/ directory.
Append the copied id_rsa.pub to your Mac's ~himbear/.ssh/authorized_keys2 file
cat id_rsa.pub >>~himbear/.ssh/authorized_keys2
Now when you ssh to that specific remote system, it will NOT ask for a password. The first time you ssh to any system, ssh will ask if the system is really the system you thing it is. But once you say "yes", it will not ask that question again.
Repeat for every remote system you wish to log into using an ssh key.
2) Apparently I managed to connect via ssh once (from the terminal, see point 1) to a local server (allowing remote connection set to ON at the server). But then, when I connected to that server from the client's finder and tried to get into my user account on that server it told me that no secure connection could be established. What's wrong here? Do I have to continue working from within the terminal to use this connection? That would be difficult for an average MacUser.
MacUser. A flash from the past, as in the MacUser magazine.
ssh is not used by default when you make connections. If you want an ssh connection, you have to establish it intentionally.
ssh can be used to pre-establish a tunnel (or tunnels) that other services can use. Once an ssh tunnel is establish, connections to local host's tunnel port will be connected to the specified remote port. For example:
ssh -L 5901:localhost:5900 [email protected]
will establish a tunnel that VNC can use. The VNC client would connect to localhost display 1 or port 5901.
ssh allows multiple -L tunnels to be specified on the ssh command line.
3) What is the security advantage of an SSH connection on a local wireless network (Airport Base Station) over WPA2, if at all?
Inside you home. Not much. Unless of course you do not trust the other members of your family. That is to say, others having your WPA2 password, and are thus on the inside, and can sniff you packets.
4) And how to set up an ssh-connection over the internet cloud to safely build a remote control/desktop sharing connection, e.g., a friend's Mac when she has a problem?
If you are using the Mac OS X Leopard built-in *Screen Sharing* and you are connecting to another Mac's built-in Leopard System Preferences -> Sharing -> Remote Management (Tiger's Apple Remote Desktop), then in the *Screen Sharing* preferences, is an "Encrypt all network data" option.
If you wish to set this option in advance, you can launch *Screen Sharing* by double clicking on System -> Library -> CoreServices -> Screen Sharing.app
You can *Screen Sharing* connections over the net using iChat. This is one of the easiest ways to take control of their system. Of course they need to cooperate. I use a Free AOL Instant Messager (AIM) account for my iChat connections. And as a side benefit you can text, audio chat and/or video chat with the person at the other end.
If you are NOT using the build-in Mac OS X *Screen Sharing* and/or you are NOT using the build-in remote Mac OS X remote management server, then this is a situation where an ssh tunnel would be a very good idea.
However, setting up an ssh tunnel between 2 systems across the internet gets complex.
In this case you might want to consider using something like LogMeIn.com which will deal with all those nasty home routers without needing to to do nasty router configurations, and it will be a secure connection. LogMeIn.com will not be as fast as a *Screen Sharing* connection or a VNC connection, but it will be secure and easy to establish. Again, this is only if you can not to Mac to Mac *Screen Sharing* using built-in Mac OS X remote desktop.
Now if you want to roll your own ssh tunnels for VNC, then I'm just going to outline the things you need to do.
If the remote system is behind a home router, you need to configure that remote home router to "Port Forward" port 22 on the Internet side to port 22 on the target Mac. Bonus points if the internet side using a high number port to discourge net bots from knocking on your door. Use the ssh -p 12345 option to connect to the high numbered port that is forwarded to port 22 of the destination Mac.
On the remote Mac you need to run a VNC server. If this is a Mac, then Leopard System Preferences -> Sharing -> Remote Management (Tiger's Apple Remote Desktop). If it is not a Mac, then for Windows, TightVNC, UltraVNC, RealVNC are possible options. Linux has a built-in vncserver, or you can install x11vnc which has the advantage of displaying the desktop screen.
Once you can access the remote system, you use an ssh command like the following:
ssh -p 12345 -L 5901:localhost:5900 remote.system.address
You can get the remote system's address by having the remote system surf over to http://whatismyip.com. Then they can tell you the IP address.
If you are going to be doing this a lot, you can get a free no-ip.com or dyndns.org dynamic DNS name for the remote system, and the remote system can run a dynamic DNS client (available from no-ip.com or dyndns.org) which will keep the dynamic DNS name updated as the remote person's ISP change's their IP address.
Finally, now that you have an ssh tunnel for VNC traffic, you have your VNC client connect to
Address: localhost
Port: 5901
Depending on your VNC client you may need to specify Display 1 instead of Port 5901. Or if you do not get a Display or Port option you specify localhost:5901

How to set-up and use FAMILY Sharing

Can someone please explain to me in detail how to set-up and use FAMILY Sharing, none of the information I have so far found in the documentation helps at all, in fact it puts you in a constant loop giving the same information over and over again
We have quite a few devices from ipads, iphones and ipods and I need to set-up Family Sharing.
We have our main Apple ID which is linked to our Payment method, I have now got my son a new iPad, I have created his Apple ID and set-up a link via FAMILY Sharing to our main Apple ID.
From what I read we should be able to share our purchased Apps between family members.
So I figured I would be able to get the Apps now via iTunes that are part of the FAMILY Sharing, however when I go into ITunes (latest version downloaded yesterday) I can only see the Home sharing menu item not FAMILY Sharing, so I cannot work out in Itunes how to get Apps that are FAMILY shared. So ok I will try and get Apps directly via the Ipad using the App Store. To test it is working I look for a known paid for App, I then go to download it and it is now asking me to pay for it again.
Can someone please explain to me in detail how FAMILY Sharing is supposed to work and how I get it to work please.
Thanks for your help
Greg

Hey GregWr,
Thanks for the question. The following resources provides some of the best information regarding Family Sharing. Included, you’ll find information on making sure the accounts are set to "Share my purchases”, as well as information on downloading Family Member purchases from the iTunes Purchased section. Please note that some applications are not shareable.
Sharing purchased content with Family Sharing - Apple Support
http://support.apple.com/en-us/HT201085
Which purchased content can I share using Family Sharing - Apple Support
http://support.apple.com/en-us/HT203046
If you don't see your family's shared content - Apple Support
http://support.apple.com/en-us/HT201454
Thanks,
Matt M.

How to set up shared use of "Contacts" data w/ 2 individual user accounts?

How to set up shared use of application "Contacts" data for two individual user accounts?

Link the contacts in one user account to a online cloud based system like Google or apples iCloud and then link the second user to that same online account. This could cause some slight problems if both people maintain their own online account to either of those systems on a phone or pad.

How to set a specific width to all the TextInputs used in a mxml file on its creation complete?

How to set a specific width to all the TextInputs used in a mxml file on its creation complete?

Hi subhajit nag,
I think the best approach would what I say is if you can make use of a Global variable or using a Singleton class having a variable which can be accessed globally through out the application.
Below is the sample what I am talking to:
So in below example you can access the variables textInputWidth and textInputHeight globally throghout the application since you have decalred them in main mxml file.
You can access these variabled in another mxml file as Application.application.textInputWidth and Application.application.textInputHeight. So if at all you are required to modify these values you are only required to modify at a single place in main mxml file..thats it.
If you are use any Singleton classes like ModelLocator you can place these variables in this class and refer from that class.
Hope this resoved your problem..
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical">
<mx:Script>
<![CDATA[
[Bindable]private var textInputWidth:int = 250;
[Bindable]private var textInputHeight:int = 25;
]]>
</mx:Script>
<mx:Canvas id="canvas1">
<mx:TextInput id="txt1" width="{textInputWidth}" height="{textInputHeight}"/>
</mx:Canvas>
<mx:Canvas id="canvas2">
<mx:TextInput id="txt2" width="{textInputWidth}" height="{textInputHeight}"/>
</mx:Canvas>
<mx:Canvas id="canvas3">
<mx:TextInput id="txt3" width="{textInputWidth}" height="{textInputHeight}"/>
</mx:Canvas>
<mx:TextInput id="txt4" width="{textInputWidth}" height="{textInputHeight}"/>
<mx:TextInput id="txt5" width="{textInputWidth}" height="{textInputHeight}"/>
</mx:Application>
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari

How to get this output using sql query?

Hi,
How to get this output using sql query?
Sno Name Age ADD Result
1 Anil 23 delhi Pass
2 Shruti 25 bangalor Pass
3 Arun 21 delhi fail
4 Sonu 23 pune Pass
5 Roji 26 hydrabad fail
6 Anil 28 delhi pass
Output
Sno Name Age ADD Result
1 Anil 23 delhi pass
28 delhi pass

Hi Vamshi,
Your query is not pretty clear.
write the select query using Name = 'ANIL' in where condition and display the ouput using Control-break statements.
Regards,
Kannan

How to set unequal columns using master pages in InDesign CS3?

How to set unequal columns using master pages in InDesign CS3?

I don't have CS3 anymore but I don't think this has substantially changed in the last few versions of InDesign.
Choose View > Grids & Guides > uncheck Lock Column Guides. Then drag the column guides to the position you want.

How to set input "Description" to mandatory?

Hi all,
How to set input "description", from infrastructure blueprint request form, to mandatory?
Thanks in advance.

Hi all,
How to set input "description", from infrastructure blueprint request form, to mandatory?
Thanks in advance.

In flex, How to set a value to one parameter, the parameter defined in a cffunction in a cfc file

In flex, How to set a value to one parameter, the parameter
defined in a cffunction in a cfc file, In the cffunction there are
much cfargument, I want set a value to one of them, such as the
cfc:
<cffunction access="remote" name="myShow" output="false"
returntype="struct">
<cfargument name="ID" type="numeric" default=0>
<cfargument name="GoodsID" type="string" default="">
<cfargument name="DestTime" type="string" default="">
<cfargument name="DestCount" type="numeric" default=1>
How I set a value to only parameter one of them , such as set
GoodsID when use mx:remoteObject.
Thanks for your help

Got maybe a solution for you, I have just tested it.
So, the idea is to use intermediate variables. Imagine Var1 and Var2 variables that you refresh with your more or less complicated queries. Then what you can do is to refresh your final variable Var3 with a query using your intermediate variables. Here is an example for Oracle:
select #Var1+#Var2 from dual
This way you can make a chain of dependent variables: Var3 is using Var2 and Var2 is using Var1.
Hope it helps.
Shamil

How to set a specific starting time for the falling snow code snippet

Hi everyone
I want to use the falling snow code snipet but I don't want it it to start as soon the movie starts.
So how to set a specific time to start the falling snow?
Thanks
Patricia

put the code (that's not in a function body and excluding variable declarations and import statements) in a function body and call it using the timer class.

How to get the Attributes of the UNIX file Directories ?

Hi Guru,
How to find of the Attributes of the UNIX file Directories in sap TC :- u2018 *ZZWT*u2019 .
The file attribute details need to show in the report.
I try on FM : EPS_GET_FILE_ATTRIBUTES
/SDF/GET_FILE_INFO
But not getting the attributes details.
If any idea plz. Help me.
Regards,
Subash

Which basis release do you use?
From 7.0 you have [GET DATASET|http://help.sap.com/abapdocu_70/en/ABAPGET_DATASET.htm] statement
Before, you may only get what you see in AL11 : mimic what is in program RSWATCH0
Or you may register and use [UNIX commands (SM69 transaction / SXPG|http://help.sap.com/saphelp_nw70/helpdata/en/fa/0971e1543b11d1898e0000e8322d00/frameset.htm]) and get the results
Edited by: Sandra Rossi on Aug 2, 2009 12:39 AM

How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8)

How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8) since November until now. Mail will no longer download on the MacBook Pro and keeps asking for my password.

Mail should still be usable with your machine - but you'll need to update the settings to conform to the requirements of your system. Check with your ISP (like ATT, etc.) for the settings that will work with your Mail. Once you've updated this, you should be able to email like before.
For example, my ISP required that I go to Mail Preferences/Accounts and make sure the details conform to your email settings.
I have no idea of what your ISP is or what the settings might be, but this is likely the source of the problem.

How to set input/output "use" attribute in the WSDL file of BPEL process?

Similar Messages

Maybe you are looking for