How to suppress FRM-40405

Hi,
How can I suppress FRM-40405, I already used System.Message_level :='10' before the COMMIT statement, but still it is coming, while saving.
Thanks in advance.
Rizly

Do like Kris said. Also if you would search the forum, you will find solutions for this problem.

Similar Messages

How to supress FRM:40405 no changes to save

Guy,
How do I supress the forms runtime message
FRM:40405 no changes to save, I get this message when ever I press the save button irrespective of whether the records are inserted or changed .

I agree that you shouldn't cover up potential problems. I didn't mean to suggest that. I think there can be valid reasons for suppressing messages sometimes.
For example, I've used :SYSTEM.MESSAGE_LEVEL := '5'; before to suppress FRM-40401 or FRM-40405 - can't remember which one, it's been a while. In my case I was using exec_sql in forms to retrieve data from a DB2 table and insert it into an Oracle table. In this case forms didn't recognize that work was actually being done and would give the FRM-40401 or 40405 error at the end of the process, even though the records had been successfully inserted.

How to suppress message level on FRM-40405 ?

Dear members,
I want to hide "FRM-40405 No changes to apply". used the following
:system.message_level := 25;
commit;
:system.message_level := 5;but still the same message, where am I wrong?
regards:

thanks for your reply,
here is the complete scenario,
I have a form "FORM1" from which, I am opening another form "FORM2". using the following code.
OPEN_FORM('FORM2.FMX', ACTIVATE, NO_SESSION, LIST_ID);when I open the FORM2 and update a field and press exit button it alter " do you want to save changes" on pressing 'Yes" it 2nd time show alter "FRM-40405 no changes to apply".
I want to suppress this alert.
when using open_form with SESSION it don't give any alert.
here I am confused that the alert is coming from where? from FROM1 or FORM2?
I tried all the possible techniques to suppress this alert but couldn't be able to suppress.
Regards:

FRM-40405, No Changes To Apply Message

Environment : Forms 9i, Web, 9iAS
Whenever a transaction is made, The "No changes to Apply" message is get displayed and then the transaction is applied and saved message appears.
How can i get ride to the First message?
ON-ERROR trigger containss the following code
if error_type = 'FRM' and error_code = 40405 then
null;
else
message(error_code ||':'||error_text,no_acknowledge);
end if;
Eben then, No change to Apply message Appears.

This is happening for all the Forms in our Application Just a guess...
Sounds like you are running your forms from a "master form" using OPEN_FORM(form_name, ACTIVATE, NO_SESSION); This will do the commit on both the called form and the calling form (and that's where the FRM-40405 comes from). You can use OPEN_FORM(form_name, ACTIVATE, SESSION); but this will create a new session for each form being called.
Try the CALL_FORM built-in instead.
Hope this helps (if my guess is wrong, forget it:)
Gerald Krieger

Supressing FRM:40405 no changes to save

Guy,
How do I supress the forms runtime message
FRM:40405 no changes to save, I get this message when ever I press the save button irrespective of whether the records are inserted or changed .

Abdetu wrote:
Thanks Tony for reply,
I tried this in the ON-Error
     IF ERROR_TYPE = 'FRM' AND ERROR_CODE = 40405 THEN NULL;
          ELSE
     alert_message := message_type||'-'|| To_Char(error_code) || ': ' || error_text;
          BEGIN
          select msg_desc
          into   alert_message
          from   cde_message
       where msg_code = temp1;
          EXCEPTION
               WHEN OTHERS THEN NULL;
       END;
     END IF;
     Regards,
Abdetu..Using WHEN OTHERS THEN NULL is a huge bug in your code.
If you even gonna use when others, you always use it with RAISE FORM_TRIGGER_FAILURE, other than that you're not displaying the error messages for the rest of the errors and you're not raising FORM_TRIGGER_FAILURE.
Your code should look like this:
IF ERROR_TYPE = 'FRM' AND ERROR_CODE = 40405 THEN NULL;
ELSE
MESSAGE(ERROR_TYPE||'-'||ERROR_CODE||': '||ERROR_TEXT);
RAISE FORM_TRIGGER_FAILURE;
END IF;Tony

FRM-40405

After moving from forms 4.5 to 6i, I get the message "FRM-40405 No changes to apply" on PL/SQL commits. How can I get rid of the message. I have tried setting system.message level to 20 but still get the warning message.

The level of message "FRM-40405 No changes to apply" is 5, so you have to set system.message level to 5:
:System.Message_Level := '5';
Helena
null

2 Problems Form Wont Run Without DataBlock / âFRM-40405â

Using Oracle8i, Form6i & Report 6i.
Requirement
1. How to run form with out DataBock
2. Avoid rising of Error âFRM-40405 No Change to Applyâ
Problem Details
Developed an index / welcome form with link of all other reports & forms.
But this form wonât open unless I include (a DataBlock or dataitems in a non-DatabaseBlock).
If I include a DataBlock it give following error:-
âFRM-40405 No Change to Applyâ when ever I open linked forms/reports and when ever I enter new record in link forms.
This error wonât stop/corrupt any process but rise on every above instance.
Wishes
Jawad

You should be able to run a form without a base table block. You do need an item (can be a non base table item) to which the cursor can navigate. This can be a text item, button, etc. If you don't want the item to show on the form, make it a very small size (height and width both equal to 1).

How to Suppress Header and footer.

Hi,
I have master-Detail report. Report prints One master and all detail records on a page. If detail records are more than to fit on one page, report prints master gaian on next page followed by detail records. For a master record If there are no detail records, I supress the master record also using format trigger.
My problem is how to suppress the Header & Footer information that has to be printed on each page otherwise. When I suppress printing of master, All I get is Page header and footer. This happens only to the master records that fall in between. The pages related to last master records are not printed.
How can I suppress printing of header and footer on blank pages.
Thanks

Thanks Santa & Rohit,
As santa has suggested, I am already suppressing the printing of master record and its column headings based on the count of number of deatil records. If count of detail records = 0, I am suppressing master record.
The problem is with Report header (TITLE etc.) and footer. I have to print TITLE and FOOTER on each an very page. So I have put these into Margins. The Count of master records at the report level, can be used to suppress the master records column headings and also TITLE and FOOTER. So if there is no master records, report does not print anything and that is fine.
Problem comes when there are some master records with "No" detail records. Something like:
-M1
----D1
----D2
----Dn
-M2
----D1
----D2
----Dn
M3
M4
M5
----D1
----D2
----Dn
M6
M7
M8
My report now produces pages for M1, M2 and blank data area (with Title and Footer) for M3, M4 and the M5. It suppresses pages for M6, M7, M8 etc. So if a master record has no detail records, but happens to be the last records that suppresses the TITLE and footer also.
Any Ideas how to suppress TITLE/FOOTER for M3 & M4.
Thanks

How to suppress the Acknowledgement Error in IDOC to File scenario?

Hi -
I got the status in SXMB_MONI as 'Processed Successfully' for the IDOC to File scenario but the Acknoledgement status throws an error saying 'Acknowledgement not possible'.
I read one of the documents in the forums on how to suppress the acknowledgement using a table on R/3 side using IDXNOALE,
i tried that option but i still get the 'Acknowledgement not possible' error.
Is there any other way to suppress this error?
Thanks,
Tirumal

Hi Tirumal,
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
This means, JDBC adapter does only send system acks, however IDoc adapter is requesting application acks. Therefore as mentioned by the previous poster, you have to disable acks for this scenario using report IDX_NOALE.
Also go through these documents for any further help:
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to handle acknowledgments for idoc.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
abhy

How to suppress email notifications from auto-contribute workflow step

Hi all,
does anybody know how to suppress the notification email that is sent from the contribution step (auto-contribute) of a criteria workflow. Now the user doing the checkin gets an email about the start of a workflow.
regards,
Harold

Harold,
few comments:
- what is the step type of your 3rd step? Is it Review or Review/Edit-New Revision?
If just Review, what happens if you change it to Review/Edit Revision or Review/New Revision?
- calling just the UPDATE_DOCINFO service does not explain neither sending the email, nor changing the current step. What might be an explanation is calling a CHECKIN service in a Review step (the engine might be confused and 'restart' the workflow as it would not know whether a new, or current revision should be updated)
Well, actually there could be one reason: updating the security group
From whatever reason, criteria workflows are designed in such a way that security group is the mandatory parameter. This means that changing the security group might actually mean that the content item is in a wrong workflow (I was just about to ask "why on earth do you call UPDATE_DOCINFO in a Java?' and this came to my mind - custom metadata might be updated directly in iDocScript via wfUpdateMetaData http://docs.oracle.com/cd/E23943_01/doc.1111/e10726/c06_core_ref.htm#i1067045 ). If that's the case, you might have to re-design the whole stuff.
Can you share details what is updated?

How to suppress a blank section in crystal report

how to suppress a blank section in crystal report. although i have set the property
"suppress blank section "=true ,still i m unable to suppress my section
please help me to cope up this issue.
thanks in advance

One recommendation I make, when troubleshooting suppression issues, is to put a visible border of the section, area or object to be suppressed, and borders for all objects contained in the section or area. This will help isolate what's suppressed, and whether the section is truly blank or has content that's blank.
Furthermore, I recommend indicating which SDK and what version you're using when posting.
Sincerely,
Ted Ueda

How to suppress zeroes in table control?

friends,
by default, i am getting the initial values (zeros 0.00 for qty. fields) for the fields that am displaying in table control...how to suppress the zeroes (fields for which no values are there) in table control? any option like we have in alv (no_zeros) avbl? thanks all

u are getting 0.00 bcos these are the field properties , so u have to create a new field for ur requirement.
check the field attributes in SE51,
DICT = DEC Format.
Program = No Check for leading ZEROS.
Regards
Prabhu
Message was edited by:
Prabhu Peram

How to suppress the HTTPS alert in a JSP page?

Hi,
I have a JSP page which is https,
If I try to move from that page to another https site or refresh the same page ,
I am getting the security alert ,
How to suppress that alert
Please help me out,
It is more urgent ....

I think it is possible because i have seen some sites in the internet which is https but I didnt see any alert for that
Please help me out

How to suppress ?xml version = '1.0'? in XML file generation thru PLSQL?

Hi,
I am using
1. dbms_xmlgen.newContext to get the information from table.
2. After that I am using dbms_lob.createtemporary
3. Then I am using dbms_xmlgen.getXml
4. Finally I am using dbms_xmlgen.closecontext
I am using the above four steps to repatedly taking records from different tables.
My requirement is : Each and every time I am getting the <?xml version = '1.0'?>.
How to suppress <?xml version = '1.0'?> ?
Regards
Srini

Hi,
Use DBMS_XMLGEN.getXMLType to retrieve the XML data into an XMLType variable.
Then, with getClobVal method, you can convert it to CLOB :
SQL> DECLARE
2    v_xml XMLType;
3    v_lob CLOB;
4 BEGIN
5    v_xml := dbms_xmlgen.getXMLType('select * from scott.emp where rownum = 1');
6    v_lob := v_xml.getClobVal();
7
8    dbms_output.put_line(v_lob);
9 END;
10 /
<ROWSET>
<ROW>
<EMPNO>7369</EMPNO>
<ENAME>SMITH</ENAME>
<JOB>CLERK</JOB>
<MGR>7902</MGR>
<HIREDATE>17/12/80</HIREDATE>
<SAL>800</SAL>
<DEPTNO>20</DEPTNO>
</ROW>
</ROWSET>
PL/SQL procedure successfully completed

How to suppress hierarchy levels on query visualization

Hello Gurus, Does anybody know how to suppress from a level down on a query visualization?
I mean, if I have the following structure...
Level 1
   Level 2
   Level 2
      Level 3
      Level 3
Level 1
   Level 2
      Level 3
...I want users to be able to expand only until Level 2, not seing Level 3 down on and without displaying those arrows ">" at the left of Level 2 nodes.
If I set "Expand to Level" hierarchy property to "2" in query designer, the hierarchy is displayed correctly at the very first opening, but the users still have the arrow ">" sign at Level 2 and are able to expand the levels down on from there.
Tks in advance! Regards,
Marcelo Domingues.

You can create hierarchy authorization.
Cheers,
Neel.

How to suppress FRM-40405

Similar Messages

Maybe you are looking for