How to suppress the showing up of the menu when press soft buttons...
I'm writing a game with fullscreen mode. When I press soft buttons in fullscreen mode, the menu shows up. How can i suppress it when i press the soft buttons for my own executions.
I have tested a game on Nokia 6600.
U missed understand my mine.
I want to suppress the system menu when i press soft buttons in fullscreen mode. I want to execute my own codes when i press soft buttons.
thanks
Similar Messages
-
How to enable the InputField when press the Button
My sceanrio is by default the InputField is in disable .when ever i press the button it should enable.
Here is the sample code for HTMLB :
<hbj:inputField
id="InputText"
jsObjectNeeded="true"
type="string"
maxlength="30"
value="Text" >
<% String text = myContext.getParamIdForComponent(create_group); %>
<SCRIPT> var jsText = '<%=text%>'; </SCRIPT>
</hbj:inputField>
<hbj:button id="Enable_Button"
text="Enable"
tooltip="Enable InputField"
onClick="onEnableClick"
onClientClick="enableInputField()"
width="30px" >
</hbj:button>
</hbj:page>
</hbj:content>
<script language="javascript">
function enableInputField()
var funcName = htmlb_formid+"_getHtmlbElementId";
func = window[funcName];
var inputfield = eval(jsText);
inputfield.setEnabled();
</script>
Refer to the following links for more info...
http://help.sap.com/saphelp_nw04/helpdata/en/53/9d0e41a346ef6fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/067941a51a1a09e10000000a155106/content.htm
Regards,
Rajiv -
How to suppress the Acknowledgement Error in IDOC to File scenario?
Hi -
I got the status in SXMB_MONI as 'Processed Successfully' for the IDOC to File scenario but the Acknoledgement status throws an error saying 'Acknowledgement not possible'.
I read one of the documents in the forums on how to suppress the acknowledgement using a table on R/3 side using IDXNOALE,
i tried that option but i still get the 'Acknowledgement not possible' error.
Is there any other way to suppress this error?
Thanks,
TirumalHi Tirumal,
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
This means, JDBC adapter does only send system acks, however IDoc adapter is requesting application acks. Therefore as mentioned by the previous poster, you have to disable acks for this scenario using report IDX_NOALE.
Also go through these documents for any further help:
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to handle acknowledgments for idoc.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
abhy -
How to suppress the back-ground execution of a query in design mode
hi guys,
there is a bahaviour of the system, that I'd like to change. So, when we
1. start EXCEL
2. go to the designer mode to create a report
3. first drop an InfoProvider (e query) into a cell,
4. second - pull e.g a filter element into another cell, still being in the design mode.
Just in this moment, the query itself has been already started in the back groud, aiming to fill the cache, I guess.
Does anyone know how to suppress the back-ground execution? I'd like to control, when to start the reports execution.
Thanks in advance.
NevenHello,
There is no way to do that if you are creating thru BEx Analyzer.
Instead use the BEx Analyzer, try to create using directly BEx Query Designer.
In that way, the query will not be executed, until you want to...
Thank you
Edward John -
How to suppress the leading zeros , -ve sign in scripts
Hi all,
I was asked to suppress the leading zeros in a field while using a script.
also how to suppress the negative sign in the scripts.
Regards,
Saroja.hi Saroja,
<u>Sign</u>
&ITCDP-TDULPOS& -> 100.00-
&ITCDP-TDULPOS(S)& -> 100.00
<u>zero</u>
&DAY& -> 01
&DAY(Z)& -> 1
Hope this helps,
Sajan Joseph. -
How to suppress the Warning messages while doing GR(MIGO)
Hi ALL,
I have a requirement while posting goods GR/GI using T-code MIGO.
Trying to do GR against PO using MIGO.After selecting the line item quantity and entering BATCH Number for line item Material when I click on 'CHECK' Pushbutton i am Getting the below Warning msg
'For batch RAB001 of material 1522582, no class could be determined'. Message no M7207.
How to suppress this above warning message, I want to Post the goods by suppressing the above warning message .
Like similarly while issuing the goods to the to the Production order using MIGO i am getting warning message when I click on 'CHECK' Pushbutton.
I do want to issue the goods by suppressing warning message in this case also.
I know this could be solved by customization but we are dealing with batch managed materials.
How to suppress the the above warning messages in MIGO through ABAP coding ...
Looking forward the helpfull answer.
Regards,
venkyHi
Answer is pure assumption.
Pls check the following OSS notes
Note 319094 - Warning message during batch classification in IM
Note 122937 - UD: Error message M7207 when you save
Note 399416 - Message M7207 not analyzed in background
Note 786755 - You cannot suppress message M7 207
Note 201196 - MIGO: Error M7207 for goods receipt for batch
Pls take opinion from SAP / Basis before implementing the OSS note
Regards
Madhan D -
How to suppress the html comment at start of output
Hi,
Does anyone know how to suppress the html comment that ITS inserts at the beginning of the response content.
i.e.:
<!--
This page was created by the
SAP Internet Transaction Server (ITS, Version 6100.1030.61.1891, Build 610.611891, Virtual Server SY1, WGate-AGate Host aauwsd00, WGate-Instance SY1)
Template: znc_xworktime/99/xml.html -->
This appears to be causing havoc with the applet's XML parser...
org.jdom.input.JDOMParseException: Error on line 8: XML declaration may only begin entities.
at org.jdom.input.SAXBuilder.build(SAXBuilder.java:468)
at org.jdom.input.SAXBuilder.build(SAXBuilder.java:770)
at com.alcatel.ontap.applets.timesheet.TimesheetTableLoader.run(TimesheetTableLoader.java:75)
Caused by: org.xml.sax.SAXParseException: XML declaration may only begin entities.
at org.apache.crimson.parser.Parser2.fatal(Parser2.java:3376)
at org.apache.crimson.parser.Parser2.fatal(Parser2.java:3364)
at org.apache.crimson.parser.Parser2.maybePI(Parser2.java:1140)
at org.apache.crimson.parser.Parser2.maybeMisc(Parser2.java:1266)
at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:654)
at org.apache.crimson.parser.Parser2.parse(Parser2.java:337)
at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:448)
at org.jdom.input.SAXBuilder.build(SAXBuilder.java:453)
... 2 moreCheck out OSS Note No.747818
You can use the ~no_its_header parameter to deactivate the default
header that is generated. As soon as this parameter contains any value,
header generation is suppressed. In ITS 6.20, you can set the parameter
with the AdminTool. You will find the relevant switch under
Security-General.
If the ITS is integrated into the WebAS (SAP Netweaver 04 and higher),
you must maintain the parameter in the ICF service. Note that you have
to maintain the parameter individually for each service.
Regards
Raja -
How to reload the screen when changing languages in JavaFX 2?
I'm beginner with javaFX and i need to change language of the screen. but i have no idea how to reload the screen when the language was changed. The application have a button where have the language available. I want just refresh screen when the user change language.
Here is the start method to show the stage.
@Override
public void start(Stage stage) throws Exception
this.stage = stage;
Locale locale = Locale.getDefault();
ResourceBundle rb = ResourceBundle.getBundle("resources/Label",locale);
loader = new FXMLLoader(getClass().getResource("FXMLDocument.fxml"),rb);
root = (Parent)loader.load();
FXMLDocumentController controller = (FXMLDocumentController) loader.getController();
controller.setMain(this);
scene = new Scene(root);
stage.setScene(scene);
stage.show();
here is the function to change the language(in the same class with start function),the rb is the new ResourceBundle:
public void refresh(ResourceBundle rb)
//change the language here
1. I don't want to use the resourceBundle to get value in resource file and set label in scene one by one.like following:
this.btnLabel.setText(rb.getString(key.test));
2. I don't want to reload the scene,like following:
public void refresh(ResourceBundle rb)
try
loader = new FXMLLoader(getClass().getResource("FXMLDocument.fxml"),rb);
root = (Parent)loader.load();
scene.setRoot(root);
FXMLDocumentController controller = (FXMLDocumentController) loader.getController();
controller.setMain(this);
catch(Exception err)
err.printStackTrace();
So do we have a solution to just set the resourceBundle and reload the scene easier?
Thanks and best regards!Your option 2 (reload the FXML for the scene using the new resource bundle as a parameter), is the way this would normally be done and what I would recommend.
Failing that, you could use option 1 of individually resetting the label text of labeled items (I don't really recommend this).
Why don't you want to use option 2?
Perhaps it is because there is some internal state of the UI which differs from the initial state when the the UI is first loaded (e.g. user has typed text in a text field and you want to preserve that). If that's the case you will need to either go with your option 1 of individually resetting the label text of labeled items, or implement something which preserves the UI state and user data by saving it in memory or to disk, reloading the UI via the FXMLLoader (essentially your option 2), then restoring the UI state and user data to what it was before the language change. Preserving and restoring the modified state seems complicated to me if you have a lot of state, so I wouldn't really advise this approach unless you really needed it. -
How to validate the field when i am populating the data cursor to block
Hi,
I am populating data cursor to multi record block.
Block contain 5 items. I am populating data cursor to block for 4 items. User will enter one item value that is quantity field.
If user enter negative values and decimal points in quantity filed i need to display message to user item level.
Please do the needful how to do it.902434 wrote:
Hi,
I am populating data cursor to multi record block.
Block contain 5 items. I am populating data cursor to block for 4 items. User will enter one item value that is quantity field.
If user enter negative values and decimal points in quantity filed i need to display message to user item level.
Please do the needful how to do it.If you want to validate at entry level then use When-Validate-Item trigger and check the input and show message. Like
If :quentity <0 then
message('do not enter negative value');
message('do not enter negative value');
raise form_trigger_failure;
end if;Why u open same thread again ? not closing one.. check this one
</a>
How to validate the field when i am populating the data cursor to block
Hopes this helps
If someone's response is helpful or correct, please mark it accordingly. -
How to deselect the text when I start the program?
how to deselect the text when I start the program?
photo:wants the blue background could not be seen:
Code Form:
Public Class Form2
Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
If ComboBox1.SelectedItem = "The Sims 4" Then
Form3.Show()
Else
End If
If ComboBox1.SelectedItem = "The Sims 3" Then
Form4.Show()
Else
End If
End Sub
End Class
There's a lot wrong with all of that.
I'm sorry that I won't be able to help...
Still lost in code, just at a little higher level. -
How to get the tab when is it pressed?
I have the following situation:
I have an array of JTextField inside a scroollpane. The size of my array is nine or ten depends on some rules. But my window show just four JTextField. So I would like to know how to get the event when I press "tab", just to show the others JTextField while I'm pressing "tab". Because I need this event to scrooll down or scrooll up.
I tried the keylistener, but when I press "tab" any method(keypressed, keyreleased, keytyped) is called.
I also tried the focuslistener. If this event I could scrooll down or scrooll up, but I couldn't do both!!
Can somebody help me??
Thanks anyway!!
GinJTextField implements Scrollable interface, which provides information to the enclosing container such as JScrollPane.
Hence when the tab event is fired, you can compute the Rectangle area that should be visible and then call the 'scrollRectToVisible()' method in JTextField. This will inform the JScrollPane to scroll to the rectangle that you mention.
HTH -
How to set the a graphic ( 3 radio buttons ) in the report ?
Hi Exports,
1. How to set the a graphic ( 3 radio buttons ) in the report ?
Acutely I want to fetch the record from MCHB-CLABS and MCHB-CSPEM , if the data read from MCHB-CLABS will show the green light otherwise if read from MCHB-CSPEM, it will show red light.
(e.g : if syntax error in report it is showing red light signal , like that how to set in report program)
Thanking you.
SubashHi,
In your internal table declaration, include yet another field for lights..
DATA: begin of itab,
lights type light,
end of itab.
DATA: GV_LAYOUT TYPE SLIS_LAYOUT_ALV.
GV_LAYOUT-LIGHTS_FIELDNAME = 'LIGHTS'.
Use the GV_LAYOUT in your FM to display the ALV.
IS_LAYOUT = GV_LAYOUT
If itab-lights = 1 => Error
itab-lights = 3 => Success
itab-lights =2 => Warning -
How to disable the "Reply" not "Reply All" button in Outlook 2010 with GPO
How to disable the "Reply" not "Reply All" button in Outlook 2010 with GPO
I need to disable to "Reply" NOT the "Reply All" button/s in Outlook 2010. If possible, then deploy it through GPO also.Hi,
We can disable the "Reply" button by using Control IDs.
Please first make sure that you have installed the
Office 2010 Administrative Templates. To disable the "Reply" button, please follow the steps below:
1. Press Windows key + R to open the Run command, type gpedit.msc and press Enter.
2. In the Group Policy Object Editor console, expand User Configuration, expand
Administrative Templates, and then expand Microsoft Outlook 2010.
3. Expand Disable items in User Interface, click
Custom, double-click Disable commands, and then click Enabled.
4. Click Show. In the Show Contents dialog box, enter
354 (the control ID for “Reply” button) in the Value field, and then click
OK.
5. Restart Outlook and you’ll find the “Reply” button is disabled (grayed out).
For more information, please refer:
http://technet.microsoft.com/en-us/library/cc179143(v=office.14).aspx
Regards,
Steve Fan
TechNet Community Support -
How to register the recipient when create job by function
I am now use JOB_OPEN , JOB_SUBMIT and JOB_CLOSE to create a job in the program. And need to post the result of the report to the person by email.
Can you tell me how to register the recipient when create the job.
( in sm36, it is easily to do but how to do in coding? )
regards,
slamHi
I think in Back ground using the above fun modules you can't send a mail to the receipient.
see the use of the above fun modules;
IF p_bjob = 'X'.
CONCATENATE sy-cprog sy-datum sy-uzeit
INTO jobname SEPARATED BY '_'.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = jobname
IMPORTING
jobcount = jobcount
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
IMPORTING
out_archive_parameters = arc_params
out_parameters = print_params
valid = valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF valid = chk.
SUBMIT ybrep
WITH < sel Screen>
AND RETURN
USER sy-uname
VIA JOB jobname
NUMBER jobcount
TO SAP-SPOOL
SPOOL PARAMETERS print_params
ARCHIVE PARAMETERS arc_params
WITHOUT SPOOL DYNPRO.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = jobcount
jobname = jobname
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
invalid_target = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
MESSAGE i029 WITH jobname.
ENDIF.
ELSE.
MESSAGE s000 WITH text-003.
STOP.
ENDIF.
ENDIF.
Reward points if useful
Regards
Anji -
How can I watch movies in germany with native tone, english? Any one knows how to switch the language when renting a movie?
I wonder the Format Tables macros on my site could be adapted?
http://www.grainge.org/pages/authoring/word/word_macros.htm
If not, I have used Macro Express to format tables in Rh. No reason it could not be used in Word.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge
Maybe you are looking for
-
Macbook Pro 13 inch stuck while turning ON and heat up
Hi, My MBP 13 inch (Snow Leaopard 10.6.8) is stuck at start upp with grey apple logo (no spinning gear). I think this problem started after I tried to turn ON my MBP with an external dongle connected to USB port (I didnt notice it is connected). Whil
-
URGENT: TRANSPORTING APPRAISAL TEMPLATE
Dear Friends, I had created an appraisal template in my SandBox development client. I then downloaded it and then uploaded it in the Golden Masters Client. I also created a transport request at the time of saving the template in Golden Masters. In my
-
ADF Specific Default Changes from 10g to 11.1.2.0.0
Does anyone have a definitive list of changes to the default settings that are new in 11.1.2.0.0? I am migrating an application from 10g to 11 and what works fine in 10 not so much in 11. I have already learned that the default iterator change event
-
Problem with burning a VCD and a DVD in Photoshop Elements 7
For some reason I can no longer burn a DVD or a VCD thru elements. When trying to burn a VCD on the Burn Screen Popup Screen under Select Destination Drive is blank and where you would select Drive speed nothing is in the drop down menu. on creating
-
I bought this laptop out of Ebay and it came with Win 7 Pro x86, however the sticker at the bottom says it originally had Windows Vista so I started investigating. I ran the MGA diagonistic tool and this was the result: Diagnostic Report (1.9.0027.0