How to suppress the Warning messages while doing GR(MIGO)

Hi ALL,
I have a requirement while posting goods GR/GI using T-code MIGO.
Trying to do GR against PO using MIGO.After selecting the line item quantity and entering BATCH Number for line item Material when I click on 'CHECK' Pushbutton i am Getting the below Warning msg
'For batch RAB001 of material 1522582, no class could be determined'. Message no M7207.
How to suppress this above warning message, I want to Post the goods by suppressing the above warning message .
Like similarly while issuing the goods to the to the Production order using MIGO i am getting warning message when I click on 'CHECK' Pushbutton.
I do want to issue the goods by suppressing warning message in this case also.
I know this could be solved by customization but we are dealing with batch managed materials.
How to suppress the the above warning messages in MIGO through ABAP coding ...
Looking forward the helpfull answer.
Regards,
venky

Hi
Answer is pure assumption.
Pls check the following OSS notes
Note 319094 - Warning message during batch classification in IM
Note 122937 - UD: Error message M7207 when you save
Note 399416 - Message M7207 not analyzed in background
Note 786755 - You cannot suppress message M7 207
Note 201196 - MIGO: Error M7207 for goods receipt for batch
Pls take opinion from SAP / Basis before implementing the OSS note
Regards
Madhan D

Similar Messages

  • How to Convert the Warning Message to Error Message in Standard Transaction

    Hi,
        I face one problem in Standard Transaction Code CS02. In that  by entering the material Number, Plant, bomstatus press enter. it gives a warning message. How to convert the Warning message to Error. In abap how to do that. Please help me.

    Mohan,
    It appears that there is some configuration you can do for BOM Message types to change the message type.  The IMG link for this function is:
    Production->Basic Data->Bill of Material->General Data->Change Message Type
    However you need to read the IMG documentation to see if this will work for you.  There are only certain messages that can be changed with this configuration step.
    Also, please do not double post questions in the forums.
    Best Regards,
    Chris H.

  • How to suppress a warning message in BDC call transaction

    Hi,
    I was calling a BDC using CALL Transaction in mode N. But due to some warning messages the background job was not success. Please tell me how to overcome the warning messages in BDC.
    Regards,
    Satish

    Hi tyr this way:
    PERFORM bdc_dynpro      USING 'SAPMM07M' '0210'.  " into the screen
          PERFORM bdc_field       USING 'BDC_CURSOR'           "cursor on the filed to update
                                        'DM07M-HSDAT_INPUT'.
          PERFORM bdc_field       USING 'DM07M-HSDAT_INPUT'   "assign values
                                         v_date.                                     "might get an warning so three enters...
          PERFORM bdc_field       USING 'BDC_OKCODE'  " first enter
                                       '/00'.
          PERFORM bdc_field       USING 'BDC_OKCODE'  "second enter
                                        '/00'.
          PERFORM bdc_field       USING 'BDC_OKCODE'  "third enter
                                        '/00'.

  • How to clear the Warning Messages

    Hi Friends,
    How to clear the warning messages, The requirement is I am preparing some warning messages in page1 , and based on some button user will be navigated to page2. In page2 If user clicks on Save button I am displaying the warning messages which are preared in first page(Code snippet shown below) when user trying to navigate to first page .
    addWarningMessage("",new Object[]{});
    Thanks in Advance

    Hi Frank,
    Yes you are right, The warning message is being displayed on Page2 when user clicked on 'Save' button on Page2. The Code snippet is being executed in ServiceImpl class when user clicks on the Save button.
    Basically, I am validating the Page1 data and Page2 data on Page2 when User clicks on the Save button on page2.
    Thank you !!

  • Process Order Warning Message while doing the Goods Receipt

    Dear All,
    While doing the GR against process order via t.code MB31, we are getting a warning message which reads u201CProduction date of bch 110420 (17.06.2011) does not match the prod. date entered (26.08.2011)u201D this happens only if the batch number already exists in the system for the same material code , in this scenario if the user ignores the warning message & posts the document the existing batch number production date also will be over written with current/inputted manufacturing dateu2026 this will collapse the batch traceability. Is there a way to customize where we can have a different production date for same batch number?..
    For example:
    Batch Number: ABCD
    Production date 10.02.2011
    Batch Number: ABCD
    Production date 11.02.2011
    Batch Number: ABCD
    Production date 12.02.2011
    Regards,
    Sivanandan

    I'm sorry to say that I find your requirement to be absolutely not logical; a batch is, by definition, a homogenous quantity of a material, that you want to separate by it's characteristics from other, different, quantities of the same material.
    If you decided that manufacturing date is a characteristic of the batch, then it has to be unique for one batch.
    So, as I see it, you have two options: either decide that manufacturing date is not important and do without, or have different batches for the different dates.

  • How to Suppress a warning message in Reports

    Hi All,
    I am getting REP-32751: Warning: Some text segments are missing warning message when ever i open a report and also while run the report in the browser. I am not able to find the missing text segments. Is there any way to suppress this warning message in oracle reports 10g?. Please let me know.
    Regards,
    Prasad.

    Just was curious and was in Metalink anyways and looked up your Error:
    >
    Another workaround: open the report under the desired NLS_LANG, and OK all the warning messages. Once the report is opened, save it (under a different name). This will fill out missing text segments with blanks,which is OK because these strings never appear in the report anyway (theyshould have been deleted...)

  • Getting the Warning message while searching in the Query panel

    Hi all,
    getting the following warning message while searching something through Query panel.
    <SimpleSelectOneRenderer><_getSelectedIndex> Could not find selected item matching value "VwObj_SearchNCCriteria" in QueryRenderer$2[UIXEditableFacesBeanImpl, id=null]
    can anybody help me in filtering this warning message
    Thanks & Regards,
    Veeresh

    Hi Frank,
    the JDeveloper version is JDeveloper Studio 11.1.1.3.0
    I have a View object View_Query for that i have added View critirea as View_Query_Critirea.
    I dropped the Critirea as Master-detail table in the page.
    when i try to search anything in the master-detail table I am getting the warning message which i mentioned in the original post.
    thanks,
    Veeresh

  • How to remove the warning messages in CODE INSPECTOR of my report......?

    Hi All,
    I am trying to do the check to my program i.e CODE INSPECTOR. i am seeing the following warning messages below.
    1 warning message
    Program zraj0xxx include  zraj0xxx row 000083 Column0000
    %LINR-VBUP contains a hyphen
    (The Hyphen is used as a dereferencing operator! )
    Note: when i double click on the above message its taking me to the below code of my program.
    DATA %COUNT-VBUP(4) TYPE X.
    DATA %LINR-VBUP(2).
    TABLES VBPA.
    DATA %COUNT-VBPA(4) TYPE X.
    DATA %LINR-VBPA(2).
    2 warning message
    Program zraj0xxx include  zraj0xxx row 000079 Column0000
    Field string VLPMA is not referenced statically in the program
    Note: when i double click on the above message its taking me to the below code of my program.
    SELECTION-SCREEN: BEGIN OF BLOCK PROG
                               WITH FRAME TITLE TEXT-F58.
    TABLES: VLPMA,                                             
                  VLKPA.  
    TABLES VBUP.
    3 warning message
    Program zraj0xxx include  zraj0xxx row 000001 Column0000
    TEXT- GOH from the text pool is not used.
    Note: when i double click on the above message its taking me to the below code of my program.
    REPORT ZHYD0147 LINE-SIZE 255 NO STANDARD PAGE HEADING
       MESSAGE-ID ZB                                        
       LINE-COUNT 065(001).
    Thanks in advance.
    Rajesh.

    Hi Rajesh,
    First  warning message.
    DATA %COUNT-VBUP(4) TYPE X.
    DATA %LINR-VBUP(2).
    TABLES VBPA.
    DATA %COUNT-VBPA(4) TYPE X.
    DATA %LINR-VBPA(2).
    Here you are not supposed to use hyphen but instead use '_'.
    Second warning message
    Program zraj0xxx include zraj0xxx row 000079 Column0000
    Field string VLPMA is not referenced statically in the program
    That means you are not using this VLPMA any where in your program so bettr delete fromt he Top Include.
    Note: when i double click on the above message its taking me to the below code of my program.
    Third warning message
    Program zraj0xxx include zraj0xxx row 000001 Column0000
    TEXT- GOH from the text pool is not used.
    this also means that you are not using this Text elemnt anywhere of your program.So delete this one also.
    Thanks
    Rohini.

  • How to specify the file path while doing bdc recording

    hi guys,
    using recording we specify transaction code where we enter all the details for the screen after that we get the recording program .....i have a doubt where can we specify the path for uploading a program from a local pc.......if possible can anyone provide a simple program to explain recording to upload an excel file from the system using recording

    Hi Gokul,
      You can use the following code to upload excel data into internal table.
       PARAMETERS: P_FILE LIKE RLGRAP-FILENAME.
        CALL FUNCTION 'WS_UPLOAD'
          EXPORTING
               CODEPAGE                = ' '
               FILENAME                = P_FILE
               FILETYPE                = 'DAT'
               HEADLEN                 = ' '
               LINE_EXIT               = ' '
               TRUNCLEN                = ' '
               USER_FORM               = ' '
               USER_PROG               = ' '
          IMPORTING
               FILELENGTH              =
           TABLES
                DATA_TAB                = IT_FILE
          EXCEPTIONS
               CONVERSION_ERROR        = 1
               FILE_OPEN_ERROR         = 2
               FILE_READ_ERROR         = 3
               INVALID_TABLE_WIDTH     = 4
               INVALID_TYPE            = 5
               NO_BATCH                = 6
               UNKNOWN_ERROR           = 7
               GUI_REFUSE_FILETRANSFER = 8
               CUSTOMER_ERROR          = 9
               OTHERS                  = 10
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ELSE.
        CLEAR IT_FILE.
      ENDIF.
    In SAP Enterprise edition, You can use FM : GUI_UPLOAD.
    From internal table, Data will be moved to BDCDATA and continue with BDC coding.
    Reward, if useful.
    Thanks,
    USR

  • Suppress an error message while creating a return PO ( ZRO type) (ME21n)

    Hello All,
    I have to write a code in order to suppress the below message while creating a return purchase order (of type ZRO) , transaction ME21n  after entering the purchase organization, purchase group, the vendor & the material no :-
    "You have no authorization to create without reference to another document".
    For users with the below values of parameter ID & parameter value :-
    parameter ID = EFB & parameter value = 02 in transaction 'SU3' , under "parameters" tab, this message is getting triggered.
    My requirement is to suppress this message.
    Please suggest an exit name or a BADI name wherein I can implement the code for this requirement.
    Regards,
    Rachana.

    You can remove parameter ID EFB
    and for Order type other then ZRO you can put check of doc. reference.

  • How to read the error message like clipping positive or -ve in Tektronix oscillioscope 3012B

    During acquiring the Sine wave or triangular wave from TDS3012B, if the amplitude or Max or min is clipping, how do you read the error?  I used *ESR?, first time when I ran the error query program, it gave me Error message saying it is clipping, after that If I run again,the error query , It would not give me the error message, I couldn't reproduce it, eventhough but On the screen if I measure, Amp, min and Max it says that it is clipping positive or -ve. I was wondering how to read the error message while aquiring the data?  If any one could help me that would be of great help.. Thanks

    Usually, reading the error status register clears it. I'm not familiar with this particular model of scope but you may have to initiate a new acquisition in order for the scope to generate a new error. Another possiblity is that a new error will be generated when the vertical scale changes. Unless someone posts with an answer, I'd say that your best bet to get an answer is to contact Tektronix technical support.

  • Can we supress the warning messages on server level

    I have a problem with the application that issues a select distinct count of a column that has NULLS value on Oracle 10.1.0.4 server. The application doesn't handle the warning message returned and shuts down. I cannot change the application code… is there a way to suppress the warning messages?
    Thanks a lot, mj

    Below is the exact statement that causes the problem.
    Unfortunately, I cannot get the actual error from SQLPLUS but the application exist with unhandled database error - Any ideas what can I do?
    I just got the answer that no application changes are possible at this moment...
    Thanks a lot for the help, mj
    create table testing_bug (id number, col1 varchar2(50))
    insert into testing_bug values(1, 'ttt');
    insert into testing_bug values(1, null);
    insert into testing_bug values(1, 'nnn');
    insert into testing_bug values(1, 'mmm');
    insert into testing_bug values(1, 'yyy');
    select count(distinct col1) from testing_bug

  • How to add warning message while using 'print' function in Adobe LiveCycle Designer

    I am trying to make pdf document for my company which requires adding a warning message while anyone use 'print' function from the page...
    Does anyone know how to add warning message on LiveCycle Designer
    Also my supervisor mentioned something using 'nag' if that rings any bell

    No you shoudl never go into the XML source unless uinstricted to do so.
    You can open the script editor (under the window menu). It will appear above the drawing area but below the toolbars. You can resize it if there is not enough room. When you click on an object in the form you can choose an event to script against in the Show dropdown. In your case you will want to choose the prePrint event. A line will show up that indicates the object that is associated with the script as well as the event and other information. Add your script below this line. Once that is done you are finished and your form is ready for testing.
    Paul

  • Need to suppress warning message while executing querywith conditions.

    Hi,
    I have created report in which I have two conditions in report I am showing report data only if keyfigure value is greator than 4. In characteristics I have calmonth and customer I want to suppress result row  so supress result row is always  but warning message comes while executing report.
    Warning : There is a condition on Calmonth result row suppress active.
                    There is acondition on Customer result row suppress is active.
    How to avoid this message permanantly.
    Thanks & Regards
    Deepak Chavan

    Dear Deepak,
    1. Open ur query in rsrt2.
    2. When the warning message occurs, click on the mesage. u ll find the Notification number of it. Note it down.
    3. come to rsrt2 screen again.
    4. click on messages tab. search for ur message with notification number, in various tabs like generation, hierarchy etc..
    5. click suppress message check box for ur message. Save. Come back.
    6. Re-xecute the query.
    Hope this solves the problem.
    All the best.
    -Guru

  • Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update

    Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update.
    How/Where to increase the relationship count?
    The message which I can see :
    Warning:
    This specification has exceeded the number of parent relationships allowed by Where Used. The Where Used tool only supports up to 500 parent relationships.
    Thanks

    This really brings up a larger topic around change management.
    The questions you should start with is
    1. What kind of change is happening to the raw material? 
    2. Will this change affect anything upstream inside or outside of PLM4P? (Will this change affect nutrition, compliance, the ingredient statement, the label etc?)
    3. Who needs to approve this change?
    If they are non-material changes (changes that don't affect theoretical calculations, the ingredient statement, labeling, upstream systems that need to be notified etc) then you should be using get latest revision instead of global succession.   Get Latest Revision will automatically switch out the material with the latest approved version.  This logic is also configurable in case you need to add additional guard conditions.   We can also provide guidance around locking the get latest revision lock once a specification has reached the retired/obsolete state so changes won't occur for specifications in those statuses.
    If the changes to the raw material are material changes (changes that affect calculations, labeling etc) then the change should be reflected with a copy of the specification.  Dependent specifications then need to be re-issued so calculations can be performed and the appropriate workflow reviews can occur.   Smart Issue allows for filtering based on status and should let you re-issue in smaller blocks. 
    Let me know more about your change management strategy, how often large material changes happen and maybe example causes for those mass changes.  We can also schedule a change management training session for everyone where we can share our vision and tools available for change management.  This topic is quite large and generally requires a lot of business process discussion beyond just the tools available. 
    Thanks
    Kelly

Maybe you are looking for