How to supress hanging productive BI at forgotten Break-Points

Dear Colleagues,
I think, that there is a customizing feature for productive BI systems, to prevent hanging prozess chains or DTPs.
Sometimes you forgot to remove a break-point in your transformation ABAPs before transporting to test or productive BI systems. If so, chains run after some hours to red without any information about the reason.
I know other BI systems, where BI wrote only break-point information into log, but run chains w/o any delay.
At my current system, BI hang up on forgotten break-points.
Who can help? What customizing is neccesary?
Many regards,
Wolfgang

Hi there,
Luckly for you I had the same problem some time ago and posted a service market place message.
Here it is (with also the solution to your problem):
Hello,
in your start rourine is the command
BREAK-POINT.
Please remove this - there is a 'strange' Basis/Kernel bug which
sometimes 'stalls' at a BREAK-POINT.
See also the note 1388307 and 1405785
You need Kernel patch 225 for solving it - or simply remove the
BREAK-POINT.
regards
Diogo.

Similar Messages

How to unlock my macbook pro i forgotten my password?

How to unlock my macbook pro i forgotten my password?

Look on the right, under the heading More Like This.

How can i closed production verion wise in c223

Welcome, ANILKUMAR BEHERA
Your Control Panel
Your Reward Points
Your Questions
Expert Forums » ABAP Development » ABAP Objects
Thread: how can i get production version value(verid) for luck through bdc.
Your question is not answered.
Mark as answered.
You are watching this thread. To stop watching this thread, click "Stop Watching Thread" below. (Watch Options)
This watch sends emails by default. If you don't want to receive emails on changes in this thread, go to the watch options, un-mark the "Email" checkbox next to the thread's entry and click "Update".
Reply to this Thread   Search Forum    Stop Watching Thread    Back to Thread List
Replies: 0 - Pages: 1 Threads: Previous
ANILKUMAR BEHERA
Posts: 20
Registered: 10/13/07
Forum Points: 0
   how can i get production version value(verid) for luck through bdc.
Posted: Feb 14, 2008 1:32 PM     Edit      E-mail this message      Reply
HI..
i have one requirement..that in c223 tcode while i luck the production version through BDC in my report program as i given bellow...i upload mat.no , plant, production version and 1(for luck)...
req:: i want while i given production version for particlular plant and material no...that production version should be luck....
so in standard tcode c223 how can i get value to compair it with my input production version value then i will close that...
program:::
report ZC2232
no standard page heading line-size 255.
*include bdcrecx1.
Tables : mkal.
data : nodata value '/' .
data : CTUMODE type c value 'E'.
DATA : CUPDATE TYPE C VALUE 'L'.
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
messages of call transaction
DATA: MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
data: begin of HEADER OCCURS 0,
data element: MATNR
MATNR_001(018),
data element: WERKS_D
WERKS_002(004),
data element: PLNNR
PLNNR_003(008),
data element: CP_STTAG
STTAG_003(010),
data element: ENTRY_ACT
ENTRY_ACT_005(011),
data element: PLNAL
PLNAL_004(001),
data element: FLG_SEL
FLG_SEL_01_006(001),
data element: PLANTEXT
STLAL_004(002),
DATUV_005(010),
WERKS_008(004),
data element: PLN_VERWE
ktext_005(001),
data element: PLNST
DELKZ_005(001),
data element: LOSGRVON
LOSVN_011(017),
data element: LOSGRBIS
LOSBS_012(017),
data element: PLNME
PLNME_013(003),
data element: PLNME
stlal_014(002),
end of HEADER.
data : begin of it_header occurs 0,
matnr like marc-matnr,
werks like marc-matnr,
verid like mkal-verid,
mksp like mkal-mksp,
end of it_header.
data : exnum(40) type c,
exnum1(40) type c,
cnt type I,
CN(2) TYPE C,
c1 type c value '(',
c2 type c value ')'.
start-of-selection.
parameters: p_file like rlgrap-filename.
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
importing
file_name = p_file.
start-of-selection.
call function 'WS_UPLOAD'
exporting
CODEPAGE = ' '
filename = p_file
filetype = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
tables
data_tab = it_header
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
DELETE it_header WHERE MATNR IS INITIAL.
LOOP AT it_header.
*start-of-selection.
*perform open_group.
perform bdc_dynpro using 'SAPLCMFV' '1000'.
perform bdc_field using 'BDC_OKCODE'
'=ENTE'.
perform bdc_field using 'BDC_CURSOR'
'MKAL-WERKS'.
perform bdc_field using 'MKAL-WERKS'
it_header-werks.
perform bdc_field using 'MKAL-MATNR'
it_header-matnr.
perform bdc_dynpro using 'SAPLCMFV' '1000'.
perform bdc_field using 'BDC_OKCODE'
'=PICK'.
perform bdc_field using 'MKAL-WERKS'
it_header-werks.
perform bdc_field using 'MKAL-MATNR'
it_header-matnr.
*>>>>>>>>>>>>>>>>>>>>here what logic can i write****
clear cnt.
do 15 times.
cnt = cnt + 1 .
CN = CNT.
exnum = 'MKAL_EXPAND-VERID'.
concatenate exnum c1 cn c2 into exnum1.
*perform bdc_field using 'BDC_CURSOR'
exnum1.
GET PARAMETER ID 'VER' FIELD EXNUM1.
CALL TRANSACTION 'C223' AND SKIP FIRST SCREEN.
if ( it_header-verid = EXNUM1 ).
exit.
endif.
enddo.
****************************************************end***>>>>>>>>
perform bdc_field using 'BDC_CURSOR'
exnum1.
perform bdc_dynpro using 'SAPLCMFV' '2000'.
perform bdc_field using 'BDC_CURSOR'
'MKAL_EXPAND-PLNTY'.
perform bdc_field using 'BDC_OKCODE'
'=PRFG'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_OKCODE'
'=RW'.
perform bdc_dynpro using 'SAPLCMFV' '2000'.
perform bdc_field using 'BDC_OKCODE'
'/ECANC'.
perform bdc_field using 'BDC_CURSOR'
'MKAL_EXPAND-VERID'.
perform bdc_dynpro using 'SAPLCMFV' '1000'.
perform bdc_field using 'BDC_OKCODE'
'=SAVE'.
perform bdc_field using 'BDC_CURSOR'
'MKAL-WERKS'.
perform bdc_field using 'MKAL-WERKS'
it_header-werks.
perform bdc_field using 'MKAL-MATNR'
it_header-matnr.
perform bdc_dynpro using 'SAPLCMFV' '1000'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_transaction using 'C223'.
endloop.
*perform close_group.
*& Form bdc_dynpro
text
-->P_0161 text
-->P_0162 text
form bdc_dynpro USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
endform. " bdc_dynpro
*& Form bdc_transaction
text
-->P_0351 text
form bdc_transaction USING TCODE.
call transaction 'C223' using bdcdata
mode CTUMODE
update CUPDATE
messages into messtab.
if sy-subrc 0.
message e000(zmm01) with
'Check your input data'.
endif.
endform. " bdc_transaction
*& Form bdc_field
text
-->P_0346 text
-->P_0347 text
form bdc_field USING FNAM FVAL.
if fval nodata.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
endif.
endform. " bdc_field
Pages: 1    Back to Thread List
Threads: Previous
New content since your last visit
Updated content since your last visit

macbook pro, 500gb ,version 10.9.5 ,
all files in open in Quiketime media player how can i closed..whenever i open quicktime all files are open..i have tried to closed by force quit..but whenever i again open quicktime files are still open..
You have basically formed a "poor" habit—i.e., closing apps and assuming they will close any/all open activity windows. The latest versions of Mac OS X now, by default, "remembers" what windows are open when an app is closed. You have three options here:
1) Get in the habit of closing active windows before closing an app to prevent them from re-opening automatically the next time the app is opened.
2) Hold down the "Option" key when selecting the "Quit" menu option (keyboard shortcut "Option-Command-Q") with system preference option in the default mode.
3) Change the default system preference to automatically close active windows in the same manner that older Mac OS X versions did by checking the "Close windows when quitting an app" in the Syeyem Preferences "General" menu.
NOTE: This setting works as a "software switch" for your application's "Quit" menu option. I.e., in the "Unchecked" mode the Option-Quit menu option and keyboard shortcut (Option-Command-Q) tells the system to forget active windows when the app is next opened while the "Checked" option mode tells the system to remember the active windows when using the Option-Quit menu or keyboard shortcut options.
Your choice for settings and/or method of closing apps.

How do I list product details using check boxes to save having to write the same info over and o

Hi there
First of all
Happy New Year and I hope everyone is well all the best for the future
Now...... back to the point
What I want to do is........
I am making a jewelry ... necklace... shopping site for my girlfriend.... well.... my wife in two weeks.... This site has been a loooong time coming.... I am still not happy with it so it still not public.... but is working ok She very upset it taking more than a year.... but I am still learning and I always want it better
Anyway
I have hundreds of Necklace details to enter..... i thought it would be easy but it is very tmie consuming...... So ...
The necklaces are made from different kinds of stones.... turquoise .. agate ... and about a hundred more different kinds of stones
In my add product form I have a field for entering product details..... to enter the different kinds of stones the necklaces are made from..... sometimes more than twenty for one necklace..... So what I want to do is have check boxes... or radio boxes to choose what stones to add to the description..... So I can have a list of about fifty different kinds of stones all with a check box next to them so that when you choose a box that stone name would appear in the product description
Sounds easy but I can't figure out how to do it.....
I think I need a different table in my database a 'stone_neck' field to store all the stone names.... about 50 fields..... .... with an id field and a name field and maybe a display field ....... I think
Does that sound correct.......?
If so then how do I display the details in a field in a table in my product detail page? I think I need a recordset on my detail page that gets all the stone names.... but how do I display the names of the stones that I have checked in the addprod form ? Do I need to put all every one of the stone info from the bindings panel? and then show region if .......
i am confused
If anyone has any ideas it would be great
Have a great day

Maybe you can take tips by visiting sites of prominent jewelry brands like Tiffany to get some ideas of how to structure your product list details.
Just a thought.
Mahadevan
www.wheretobuyringsnow.com

How to supress blank page in scripts?

Hi gurus.
can any one let me know how to supress blank page in scripts? When one of my condition satisfies it should print two pages and its working fine. When condition fails, it should print one page but its printing blank page as second page.
Waiting for your answer.
Urgent
Regards,
surya.

hi,
1. By providing the control commands in scripts,u can supress the blank pages.
2.write the data between protect and end protect.
3.Enclose the text that you want to prevent page-break in PROTECT... ENDPROTECT
SAPscript will ensure that each line of this text is printed together on the same page.
/: PROTECT
Text
Within
The same page
/: ENDPROTECT
Regards,
SHIVA(reward if helpful).

I am a high school teacher. My district purchased the entire CC Suite. Where can I find a tutorial in book form to learn how to use your products? Do you all provide free book samples to teachers?

I am a high school teacher. My district purchased the entire CC Suite. Where can I find a tutorial in book form to learn how to use your products? Do you all provide free book samples to teachers?

Good day!
This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by. (edit: Actually they are more likely to frequent the regular Photoshop Forum.)
Regards,
Pfaffenbichler

How can I purchase products from the app store while travelling outside my country of residence?

How can I purchase products from the app store while travelling outside my country of residence? We are from Canada, travelling in the USA and wish to buy a TV series but get a message to buy it from the Canadian store. When we tried to do this we got the same message.

According to the terms of sale, you have to be in your country of residence in order to make a purchase. I've heard of people able to make purchases outside their country and also of people being unable to do so. It appears that Apple's enforcement is not 100%.
In order to buy from the U.S. iTunes Store, you would need to have a valid billing address in the U.S., a credit card billed to that address or an iTunes Gift card purchased in the U.S. and be physically present in the U.S. at the time of purchase.
International copyright law is currently very inconvenient for the consumer.
Best of luck.

How to get open production orders by plant wise

Hi,
How to get open production orders by plant wise.
i know from tcode COOIS, is it possible to get from this. if so what are the parameters we have to give to get open production orders by plant wise.
is there any tcode or tables available , please provide details .
regards,
Hari priya

Hi,
What is your definition of Open Production Orders?
Definetly you will get the report from COOIS for Plant wise.
Whther you want to consider all the Orders having the Status REL but not DLV?
Then there is a chance of having the Orders, still with PDLV status but GR is done for the full Qty. May be you don't want to consider the TECO status, eventhough the Order is short closed??
Better to ommit the Orders with CRTD status also..
So, based on this which status to consider and which status not to consider..
You can define the "Selection profile status" in BS42.
Use this selection profile in COOIS, so that the rsults will be accurate..
Best Regards,
Siva

How to delete Open Production Orders

Hi,
I would like to Delete Open Production Orders.plz tell me How to delete Open Production Orders

Hi
for deleting POs you have to delete the line items. First select the line items and then choose the icon 'delete' in the item overview screen of PO.
For open PO s also you have to do the same Or else change the PO quantity to the desired qty for what GRN has been made.
Regards
Siva

How to supress a blank page in smart forms

Hi,
I am using a command in Smartforms to trigger a new page whenever a new BELNR(Accounting document). My problem is in the output i am getting a first page is blank and remaining pages are ok.
What i did Is In conditions tab i written as temp NE belnr. So first time temp is nothing so blank page is coming. and in the following text elements i am passing a belnr value to the temp.
Temp = belnr and in general attributes go to new page check box has been activated. Then how to supress a blnk page.
Regards
Ramakrishna .P

Hi,
I am not using loop.
In main window i have the contents as
Header---- Headers for table
Main Area---- text elements ( i have fileds slno, belnr,glaccount,cost center,gtext,description,dmbtr,wrbtr)
In belnr field i have created the command there i am comparing the condition temp ne Belnr and go to new page on conditions tab
wrbtr text element i am passing the g_temp =belnr
My requirement is whenever new belnr comes new page has to trigger and corresponding gl accounts need to be displayed and end of the belnr i want to display the footer.
For your information passing the belnr values from the print program (select options) to smart form
Footer---footer

How to make "More Products" from Answers visible

I am using OBIEE 10.3.4.2.
I developed a solution that requires "Delivers". On my developers' box (Windows 7) everything is visible. Under "More Products", I see:
Delivers
BI Publisher
Marketing
Disconnected Analytics and
Download Oracle BI for Microsoft Office.
The moment I put my RPD and Catalog in System Test--which uses https:// and on a UNIX server, I can now only see:
Download Oracle BI for Microsoft Office.
which makes me suspect that their is a setting/configuration that is preventing me from seeing these products.
Can someone tell me how to make these products visible? What settings do I need to change to make them visible?
Thanks,
"D"

I shut the services both in SYS Test and my DEV box.
Zipped the Catalog.
Deleted all the old catalogs from my DEV box.
unzipped the new Catalog
started the services and I can see everything under " More Products"
Shut down the services
Moved back the Catalog to Sys Test
And NO LUCK!!!
I am beginning to think it is something to do with SSL
"-D"

How can I transfer products that were purchased for me by our IT vendor to our own Adobe account

How can I transfer products that were purchased for our company by our IT vendor to our own Adobe account? - we are no longer using this IT vendor.

There's no way at all except to delete them and then buy them from your Apple ID.
(97379)

How to supress the dialog box in smartforms

Hi Experts,
Can any body tell how to supress the dailog box while executing the smarform.
valid answers will be rewarded.
Thanks,
Satish.

data p_out like ssfcompop.
Look at smartform function module,there could be option like
p_out-tdnoprev = 'X'.
pass p_out to smartform function module

How to create the Product Hierarchy maintenance ..?

Hi All,
How to create the Product Hierarchy maintenance (IN APO System), I know manual creation, going to the transaction : /n/sapapo/relhshow , how to create programmatically, is there any Function module?
Pls let me know
Puppy.

Hi Puppy,
Please check whether the below BAPI can be used by you.
T-code: BAPI
Object name: ProductAllocationAPO
Obj type:- BUS11305
Regards
R. Senthil Mareeswaran.

How to view registered products? (9/15/2012 - Solved)

In the original thread "How to view registered products?" (https://discussions.apple.com/thread/1195139?start=0&tstart=0) the question was asked is if there is a way to view all of your registered products in one place, not just the ones with a warranty. The original answer at the time was no.
The answers is yes. You will find it here:
https://supportprofile.apple.com/MySupportProfile.do
Also, to take a look at products with apple care protection only you can go here:
http://www.apple.com/support/applecare/
- Login with Apple ID
- Click View on the left menu and then continue.
Or for a direct link:
https://selfsolve.apple.com/GetAgreements.do
Hope this helps.

A supplementary question
Using the Support Profile link in the original mail, I have updated to my current models; however it DID NOT contain a 2008 MBP 15 that I am sure should have been registered as it was still in warranty when I bought it. It should have had a recall (graphics card) which has now failed a few months beyond the end of the service programme.
Should the Support file register ensure notification of any further recalls?
In the case of a used machine does a new registration over-ride the previous owners if they registered it for warranty?
Maybe I am spoilt by Nikon

How to supress hanging productive BI at forgotten Break-Points

Similar Messages

Maybe you are looking for