How to suspend a single Active Job

Hello,
I have started a transport and its background job is in released status. All the background jobs are in running status. I just want to suspend an active job and to transport the request and later i want to release that active job.
With Regards,
Vijay

Hi
When you are doing a transport u have to stop the active jobs in SM37.After completing the transport you have to reschedule the jobs in SM37.
Before doing transport we have to schedule the down time and run the report BTCTRANS1 in SA38.
This report will hide the status of background jobs.
After completing the transporrt we have to run the BTCTRANS2 report it will start process of background jobs i.e released jobs come to ready state
kiran kumar.v

Similar Messages

SM37 how to quite an active job?

Hi, How do I stop an active job in SM37?
Thanks,
Helen

Double click on the active job and click job details button. From here note the application server and process id(PID) for the job.
Now go to transaction SM51 and double click on the application server name . you will get a list of jobs executing on that server. Select the job checkbox and goto menu Process->Cancel without core. Now come back to Sm37 and check , the job will be cancelled.
Sometimes it does not get cancelled or still shows the active status because it does not fully get diconnected from the process id. So you can check the job from SM37 by going to SM37 and goto menu Job-> check active job.it will make corrections to the job.

How can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

We need the Request Restart ability when scheduling a single reoccurring job in Redwood. Most of our jobs are scheduled in CHAINs which offers the Final Status Handler on Step level, and the schedule is "paused" when a job in the CHAIN has failed ( the next instance does not populate until the OP MSG has been Replied to) , and once the OPERATOR message is replied to, the CHAIN can resume running again ( desired ) . But we need this same ability when scheduling a single job not in a CHAIN. In our testing, we set up a job with Request Restart chosen on the Error , Killed and Unknown selections on the Restart Behavior Tab. But we found when a job is scheduled say once a day at 8AM, and when it fails, an OPERATOR msg appears allowing a Restart choice ( desired), but the next day's schedule also populates ( undesired) and we do NOT want the schedule to continue on yet because we need a chance to fix the error before the next insance runs for business reasons. So how can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

Hello Fran,
You can wrap the job chain in a master job chain in the first step and set the final status handler there.
You can also set the Restart Behavior to 'Stop Submit Frame', in that case you will have to resubmit the job once you are finished troubleshooting.
Regards Gerben

How to CANCEL ACTIVE JOB in SM37??

Hi Experts,
Pls. let me clarify one simple doubt that, am trying to CANCEL a ACTIVE jon in SM37, bcoz its taking too much time, like 60 hrs, so am suspecting that, some thing is wrong in report prog./SELECT!!!
So, I tried, SM37>MENU>JOB-->CANCEL ACTIVE JOB,
but, its not getting canceeled or DELETED??
So, How Cal I CANCEL/DELETE a ACTIVE job in SM37??
thanq

thanq,
its worked out.
but, i dont know that Wht happened to my browser/SDN/system, I am unable to see the Rewarding points option!!!!!!!!!!
So, as soon as i see this option, will post the reward points.

How to stop and remove an active job.

How to stop and remove an active job.

What sort of "job" are you referring to? A print job? If so, open the queue for the printer - it should be in your Dock, or you can access it through the Printers & Scanners system preference - and click the green Pause button to stop the entire queue, or the Pause button next to a specific print job to pause just that job. To clear a job, click the "X" button to the right of the job.
If that's not the "job" you mean, please post back and clarify.
Regards.

How to debug active jobs

Hi,
How to debug active jobs?
Thanks in Advance

Hi,
You can debug the job using :JDBG: But the only criteria, you can dubug the job if you are the creator of that job.
Regards
Maneesh Chandran

How to execute a active Job in T-code SM37.

Hi
How to execute a active Job in T-code SM37.
Pls help

hi,
In SM37 give the job name or user name. then in job status check only the active jobs then u can execute the job..
Subhash

How to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

how to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

You can use third party software True Last Logon 2.9.You can export the file in excel for report creation.You can use the trial version this will achieve what you are looking for.
True Last Logon displays the following Active Directory information:
--Users real name and logon name
--Detailed account status
--Last Logon Date & Time
--Last Logon Timestamp (Replicated value)
--Account Expiry Date & Time
--Enabled or Disabled Account
--Locked Accounts
--Password Expires
--Password Last Set Date & Time
--Logon Count
--Bad Password Count
--Expiry Date
--You can also query for any other attribute (Example: Description, telephone Number, custom attibutes etc)
Refer the below link for trial version:
http://www.dovestones.com/products/True_Last_Logon.asp
Best Regards,
Sandesh Dubey.
MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
My Blog
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Lifelog, how to delete single activity

Hi, how can i delete a single activity like photos that i already taken?
I have the last lifelog app version, where one of the new is features is -Delete single activity-
I could not find any option to do this.

I feel your pain.. it don't matter how many times you press that button the activity remains like a plauge!! (unless it's a sleep activity then it just disapears) but this has a little trash bin icon instead of the word delete... possibly just a faulty bit of code from the Devs??

HT4775 I made a DVD in compressor and even though the disk is finished, I still see the active job. How do I clear the job off the active jobs list?

A few weeks ago, I launched compressor via FCPX to make a DVD. Everything went fine. The disc burned and ejected from my DVD burner, but the job is still listed under Active Jobs. Nothing I've tried will make it go away. Is there any way to clear that list?

Go into your Home library and open Application Support and then Compressor. Open the History sub folder and within that, open V4. Scroll down to find the job and drag it to the trash.
Russ

How to delete a single request from DSO in BI 7.0

Dear Experts,
Could you please tell me how to delete a single request from DSO?
I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
Please suggest me this issue.
Regards,
Prathap

IN DSO--its a very basic thing....
ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
So ,each new request has a realationsip with the older request.
So in the cases:
1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
e.g older request entries:
a x 1
new request
a x 2
change log
a x 1
a x -1
a x 2
so its quite obvious you can't have a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
thats request reverst posting
IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
regards,
rk

Regarding activation job triggering more than once

hi all,
i have designed a process chain in which there are 5 info packages (same info source) loading into same ods.I have then clubbed these 5 info packages steps in one OR condition.however,there are multiple activations which are triggered i.e. as soon as one of the load is completed one activation job is triggering and similarly it happens with other loads also.
this multiple triggering of activation causes subsequent processes in the chain to trigger multiple times which is not required.
is there way that we can trigger this activation only once.
Please note that OR condition is required and AND cannot be placed in its place.

HI Parth,
I think you cannot do away with AND.
You will have to use it just when the 5 different process complete.
I am not sure how did you make it but i would suggest to go like this:
Loading1
Loading 2
Loading 3
Loading 4
Loading 5
Then you can have the Activation step. after the loading is completed.
Do assign points if it helps.
Do iterate your problem in more descriptive manner if this doesnt helps :).
Regds,
Den

Error in background job for program RSGET_SMSY error message No active job

Hello!
I would like to set up the Change Request Management functionality in SAP Solution Manager.
The only red warning by executing Test-button in Tcode SOLAR_ADMIN_PROJECT is:
<b>Error in background job for program RSGET_SMSY error message No active job found</b>
Can someone please tell me how to solve this problem?
(tcodes, technical steps)
Thank you very much!
regards
Thom

Thank you very much!
Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
Thank you!
regards

How to define the default activity for an unbounded task flow?

In the new "Fusion Developer’s Guide for Oracle Application Development Framework 11g Release 1" documentation at the bottom of page 14-3 it states "An unbounded task flow .... contains a default activity, an activity designated as the first to run in the unbounded task flow, because an unbounded task flow does not have a single point of entry."
What I can't find is how to define the default activity in an unbounded task flow and where this is recorded? Can we set this via the task flow diagrammer, and which configuration file is it stored?
I note the first time I run the application with an unbounded task flow a dialog asks me which of the activities in the adfc-config.xml file to make the default, but I can't find where this is recorded.
Anybody have any ideas?
Thanks,
CM.

Chris,
In fact this information is nothing that belongs into the taskflow meta data because unbounded taskflow have more than one entry point and there is no notion of default. Its a tools setting (JDeveloper) we had before
Frank
Message was edited by:
Frank Nimphius

OfficeJet 8500A. Single print job prints half on two pages.

I have an OfficeJet 8500A Premium for about a year now. All was working well, until recently.
I'm using Firmware Version: LRP1FN1126AR
Now, when I send a print job that's supposed to be on a single page, it prints half on two pages. This, of course, wastes my ink, paper, time, energy, and sanity. I've searched around and can't find a resolution to this problem.
I posted a picture of the problem I'm experiencing, personal info areas blurred out. The only way to fix this, which is a temporary fix, is to turn the printer on and off. That seems to correct the problem, but only for a short while, since it will eventually start printing single print jobs split on two pages.
Please help. Thanks.

It sounds like the driver for the printer and the driver for the IE9 are having a conflict. I would advise trying to open the same page in a different web browser to see if the problem follows multiple browsers, or only IE9.
Also, I would try reverting back to IE8 as a possible workaround. If none of these are able to get the printouts desired, then I would look at Shane_R's thread on using an alternate driver located here.
Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

How to suspend a single Active Job

Similar Messages

Maybe you are looking for