How to take out a negative cutlist after editing on a telecine video?

A film was shot on film stock @ 24 FPS.
I have a one light telecine video of the rush @ 25 FPS.
How do I edit the rush on Premiere Pro CS6 keeping in mind that I don't generate virtual frames (i.e. 24 frames on the time line corrosponds to 24 physical frames on the negative).
After editing, I need a cut list, i.e. a text document output with TCs and corrosponding edge code marks to refer to, while cutting the original negative.
The same task can be done by conforming the video to 24 via Cinema Tools while working on FCP. I need the solution for Premiere Pro.
Thanks a lot.

Wouldn't it be better to get a proper 24 fps telecine and cut that?

Similar Messages

My ipad will not come on. i tried to restore and get error message 1603, dont know how to take out itsw

my ipad will not come on. i tried to restore and get error message 1603, dont know how to take out itsw which it tells me to do.

Error 1603
Follow the steps listed below for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
The above is from the 2nd link below.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

How do I save/burn my images,after editing, to a disc and what format JPEG? THX!!!

How do I save/burn my images,after editing, to a disc and what format JPEG? THX!!!

You're lacking information. We need to know what software you are using what version it is. What computer system and what version is the operating system.

What is the next step after editing or triming a video ? What type of file format to save and what to do after that ?

what is the next step after editing or triming a video?
what type of file format should be save and what to do after that?

In the early days of digital video editing, an export render could take hours! Not many applications are as hard on system resources as video editing, and rendering the final edit is probably the most system intense action of all.
Head on over to the Premiere Pro Hardware forum to see what sort of computer hardware the pros use for NLE (non linear editing), or to the PPBM5 site for a better look.
PPBM5 Benchmark
Also check out the specs on the Video Guys website

How to Take Out Default Buttons on Calendar ?

Hi,
Does anybody know how to hide/remove the default "Previous" and "Next" buttons on a calendar ? Any advice is greatly appreciated !!
Dorothy

Yes, I just want to display the calendar for a particular month selected by the user. I am able to do so. However, the "Next" button still shows even though technically there is no next month to go for. Clicking the "Next" button will then display the calendar with a line saying "No rows returned" and with a "Previous" button. The "Next" button, "Previous" button, "No rows returned" message together is causing confusion to the users. Therefore we want to hide/take out the two default buttons there. Any insights ??
Thanks,
Dorothy

How to take out a report from WEB

Hi,
I have to take out a report from web. It needs to be passed two parameters from WEB. Which is the URL that i have to put in the Explorer, to get the report (made with Reports 9i). If it it with VALUE0=PARAMETER1&VALUE1=PARAMETER2 why doesn't it work?
What i need is this part: http://.............&desformat=pdf&destype=cache&report=lgv_solicitud_viaje.rdf&valor0=200700000301

Sounds like you need to use the rwservlet. Look here for more details but an example URL for the rwservlet looks like:
http://myias.mycomp.com:7779/reports/rwservlet?server=myrepserv+report=test.rdf+userid=scott/tiger@mydb+desformat=pdf+destype=file+desname=test.pdf

HT201303 how to take out my credit card

i want to know i can take out my credit card number out of my account.
Thank you.

So if you have iTunes on your computer this is possible, otherwise your out of luck. go on the itunes store and onto your apple ID's account, then go onto the payment informaiton and there should be a none option for your payment option. Hope this helps.

Takes me back to Events after editing a picture

This is MOST annoying. If I make edits on a single picture in an event, when I click "Done" in the lower right, it takes me back to the Events thumbnails instead of back to the picture I was working on...or even the Event I was in. I'm running version 8.1 - it never did this in the older versions, it always took me back to the picture I was working on inside the event.
After editing a pic, it sometimes won't let me get back into that Event (the one I was working in) without going into a different event then clicking back on the original one.
Anyone else have this problem? And if so, how did you fix it (if you did)? I'd almost rather edit everything in Photoshop and re-import it than have to put up with this.
Thanks!

You guys are sharing the Library? What are the Permissions on that external disk?
Here’s a trick:
Set iPhoto as external editor, then in the iPhoto Preferences set it to edit in the main window or in Full Screen. Then when you edit it will open in iPhoto. For ones that require a bit more: right click on the pic and select ‘Open in External Editor...’ Best of both worlds.
But when I do use Photoshop and save the file (to where I thought it originally was in iPhoto), I can't find it in iPhoto later
The trick is not to ‘Save As...’ but simply Save in Photoshop. You may be using Save As to protect your original photo. However, with iPhoto that’s not necessary as iPhoto wills end a copy of your photos to Photoshop if its set as External Editor.
The only exception this is is if you’re shooting RAW. Are you?
Regards
TD

How to take out put of each documents

dear all,
i want to know the detail configuration and settings in sd for out put.
such as i need to take the print of sales order or invoices so what type of settings i have to do
how one can take a print out after creation of a sales order,quotation ,invoice and scheduling agreements with the necessary fields i need in it.
if possible how it can be emailed to the concern person.
with regards
subrat

Hi,
Output can be configured in following way.
1.In SPRO Create output type.
2.Create access sequenece.
3.Assign output program to the output type.
4.Add the output type in output determination procedure.
5.Assign the output procedure to document type i.e.Sales order,Delivery docuement,Billing docuement.
6.maintain the output condition record.
7.You can also enter the output manualy in all the documents.
For mails to be sent,maintain processing medium as Mail the output type configuration.Maintain mail Id in customer master.Maintain proper access sequence.
Reward points if useful
Regards,
Amrish Purohit
Message was edited by:
AMRISH PUROHIT

How to take out the Hard Drive...

My logic board died on my 12' iBook G4 and the information on there is critical to get back. I can't start my ibook up in target mode, but I would like to take the Hard Drive out and put it in a case. Can someone point me to a current link, step by step instructions please. Time is short, and I need a quick fix.
Thanks

Try this:
http://www.ifixit.com/Guide/83.0.0.html
Have fun!
Adrian

How to come out of standard transaction after giving error message

Hi Experts,
I have one requirement like i need to validate a field in standard transaction ME21N. If user enters wrong value then i have to give error message and leave the transaction ME21N immediately. If i do the code with error message then i struck in the same screen of ME21N(but i need to come out of ME21N).Can anybody help me for this particular scenario.
Regards,
Bujji

Ahhh, I see, this is a different story, now.
How about issuing an Information message, and saying LEAVE TO TRANSACTION 'ME21N'.
Message I001(00) with 'THere is some problem, transaction ending'.
leave to transaction 'ME21N'. " Or you may be able to use SY-TCODE here.
Regards,
Rich Heilman

How to find out Shopping cart no after creation PO from PDP

HI all,
Classic PDP Scenerio:
PR is transfered to SRM system and from thier i drafted the PO (Classic scenerio). However, once PO is created in the Backend system , how findout the related documents information (PO or SC) which is created from PR?
Thanks
Harish

Hi Harish,
Have a look at the following thread:
Re: Get the tracking number ( SC no) using PO in SRM
Hope this helps.
Thanks,
Pradeep

How to take out ventilator on Mac OS X 10.3.9

Hi, I still use the old mac os x version 10.3.9 for some of my music recordings. The ventilator is too loud.
Can I disconnect it?
Jo

Is ventilator an application or hardware? I'm not familiar with it. Could it be Ventrilo? I assume you want to turn the volume down. Can you be more specific what you want to do? Also, what Mac model?
 Cheers, Tom

How can I retain my counter button after editing page?

How can I retain the numberon my counter button after I have change information on my welcome page?

Since MobileMe will be discontinued on June 12, 2012, and with it the following features:
Features Unavailable When Publishing to a Non-Mac Server:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ RSS Feed Widget
you might get ahead of the curve and use a 3rd party counter. There are many counters that will give you much more than just the number of visitors and can be setup to not count your visits. I use StatCounter which gives the following info on visitors:
Click to view full size
This tutorial describes how to add the counter using an HTML snippet: #13 - Adding a StatCounter as an HTML Snippet.
OT

How do I update a JTable immediately after editing a cell?

I have a JTable where I use a JComboBox to select a value in a cell. When a value is selected this updates another cell in the JTable.
This works like I want to except for that I have to deselect the JComboBox (ie. click in another cell) before the other cell is updated.
I want the cell to be updated when the JComboBox changes without having to deselect the JComboBox first.
How can I do this?
Thanks in advance for any help...
Geir

As an example I just copied the TableRenderDemo from the Swing-tutorial (http://java.sun.com/docs/books/tutorial/uiswing/components/table.html).
The only change I have made to the TableRenderDemo is to replace the DefaultCellEditor with my own editor (ComboBoxEditor extends DefaultCellEditor).
The only change I have made to the program itself is therefore to replace
sportColumn.setCellEditor(new DefaultCellEditor(comboBox));*
with
sportColumn.setCellEditor(new ComboBoxEditor());*
(And add the class ComboBoxEditor, of course.)
When you run the original program, the default editor closes itself when a value is selected from the combobox. My editor doesen't close itself when a value is selected, but remais open until you click on another tablecell. I want my editor to close itself in the same way the DefaultCellEditor does.
The code for TableRenderDemo is here: http://java.sun.com/docs/books/tutorial/uiswing/examples/components/TableRenderDemoProject/src/components/TableRenderDemo.java
Again, to test what I mean just replace
sportColumn.setCellEditor(new DefaultCellEditor(comboBox));*
with
sportColumn.setCellEditor(new ComboBoxEditor());*
(And here is the code for my own celleditor:)
private class ComboBoxEditor extends DefaultCellEditor {
private JComboBox comboBox = null;
public ComboBoxEditor(){
super(new JComboBox());
@Override public java.awt.Component getTableCellEditorComponent(JTable table, Object value, boolean isSelected,int row, int column){
comboBox=new JComboBox();
String name=(String)table.getValueAt(row,0);
if(name.equals("Mary")){
comboBox.addItem("Marys sport");
comboBox.addItem("Marys cooking");
else{
comboBox.addItem("Other sport");
comboBox.addItem("Other cooking");
return comboBox;
//else return super.getTableCellEditorComponent(table,value,isSelected,row,column);
public void setCellEditorValue(Object newData){
comboBox = (JComboBox) newData;
@Override public Object getCellEditorValue(){
return comboBox;
}//end class

How to take out a negative cutlist after editing on a telecine video?

Similar Messages

Maybe you are looking for