How to Take source value remove zero and use it In receiver Determination

Hi
I am working On IDOc to Soap channel.
In idoc Fields ,I am using EMPST field from IDOC and accordingly I am putting Condition in Receiver Determination.
IF EMPST 111 Then Revceive1
IF EMPST 222 Then Revceive2
IF EMPST 333 Then Revceive3
But sometimes values also Come as 000111 or 00111 or 0111 same for Others.
I have used follwong condition in Receiver Determination.
IDOC/E1EDK01/EMPST u2248 *111
But it working fime for leading zero.
But if values come as 8111 or 78111 it is also routing message to Revceive1.
same for others.
Can you plz suggest solution?

you can use enhanced receiver determination ,, where you can specify your logic in the mapping
http://wiki.sdn.sap.com/wiki/display/XI/EnhancedReceiverDeterminationinSAP+XI
http://wiki.sdn.sap.com/wiki/display/SI/StepbyStepguidetoExplainEnhancedReceiver+Determination
in the UDF you can write the logic to remove leading zeros if required:
Re: removing leading zeros

Similar Messages

How to take a photoshop pattern repeat and use it in Illustrator?

Hi,
I want to be able to take a pattern I have created in photoshop and bring it into Illustrator and be able to fill an object with the pattern. How do I do this?
Thanks

1. Copy the PS pattern to the clipboard and paste into AI.
2. Drag the pasted object into the Swatch Panel (it becomes a swatch pattern).
3. Fill any selection with the swatch.

How to calculate the value from prompt and use the value as filter

Hi everyone,
I am designing a OBI query. I want to write a query and one of it filters comes from the dashboard prompt. Say I want to make a query to pull out the record for 3 consective years and user wants to enter the last year # and omit entering the first 2-year code#.Thanks!

Hi,
if i understand your question
you have a prompt for year.. and it's assigned with presentation variable, say: var_year
And you are just entering value for only one year, say 2000.
Then, the request (which is using that prompt value as filter) should display year values 2000, 2000-1 (i.e. 1999), 2000-2 (i.e. 1998).
Is this your requirement?
If then,
Hope you are using edit box as control for year prompt and assign a presentation variable for that prompt.
Now, in report go to filter of year prompt, click on advance > Convert this filter to SQL.
write here... *Times.Year between @{var_year} and @{var_year}-2*
And make sure that your var_year is integer, if not cast it to integer

How to Check source systems in RSA1 and verify that connections are working

How to Check source systems in RSA1 and verify that connections are working ok and how to Check Planning Area have green status.................

Hi,
In rsa1, go to 'Tools' and option 'Manage Source System' - the screens are self explanatory there after. To check the planning areas, go to transaction /SAPAPO/MSDP_ADMIN anc check the status of the relevant planning areas.
Regards
Vinod

How to take flash archive zoned system and how to deployee from jumpstart s

Hi All
How to take flash archive zoned system and that flash archive how to deployee from Jumpstart server
please help me in this,it is very urgent for me
Thanks
Murali

when you've created the flar image just setup the jumpstart server accordingly
1) create a profile for a flash installation
install_type flash_install
archive_location nfs js1:/data/server.flar
partitioning explicit
filesys c0t0d0s0 2000 /
filesys c0t0d0s3 6000 /usr
filesys c0t0d0s4 2000 /var
filesys c0t0d0s5 2000 /export/home
filesys c0t0d0s6 520000 /export/zones
2) create the jumpstart client just as you would normally
3) jumpstart the server
As far as i know this should work

How to obtain source code of weka and enable to modify it

hello,
how to obtain source code of weka and enable to modify it such i want to extract code of some process that I make

Hi ENG,
Since the issue regards to Weka. It is out of the support boundaries of our forum, I suggesT you post the question in the following forum:http://forums.pentaho.com/forumdisplay.php?81-Pentaho-Data-Mining-WEKA.
It is appropriate and more experts will assist you.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to set default value of a table using sequence number

Dear all,
Does any body know that how to set default value of a table
using sequence number.
But I don't want to use trigger to do that.
Please help!!!!
Eldon

Andrew is essentially correct. You can get around the trigger,
but not the sequence, if (and this may be a very big if) you can
guarantee that every time an insert is done into the table, from
whatever source, the statement looks something like
INSERT INTO tbl VALUES (sequence.nextval,other_columns_values)

I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store

How can i send pictures from iphoto and use entourage

how can i send pictures from iphoto and use entourage. I use to do it when I used Mac OS Leopard

Click on the image in question and execute COMMAND D which will copy an image in iPhoto.
To delete an image in iPhoto, execute COMMAND DELETE.
Ciao.

You can take a coldbackup from solaris and use it on windows NT?

hi all,
You can take a coldbackup from solaris and use it on windows NT?
can we?
regards
girish

khaja(DBA) wrote:
Yes!!! why not
Have you actually done this?
Why not? Because the internal structure of the solaris files is different from Windows.
>
>
Regards,
khaja

HT201320 I have IOS 7 5S and using mail. Receiving works great. Sending mail will not work. Using Centurylink. On my IOS 6 Iphone 4 it works great. Compared settings and they are identical. Now what?

I have IOS 7 5S and using mail. Receiving works great. Sending mail will not work. Using Centurylink. On my IOS 6 Iphone 4 it works great. Compared settings and they are identical. Now what?

Well, this is a recurring issue for many users...a small percentage of users but still a bug. Report the issue here to Apple: www.apple.com/feedback
iOS7.0.3 will be released next week, which as of now, I know is primarily for an iMessage but hopefully it will clear up some of these email issues some are also having.

How to take a value of the first record/occurrence and the last record?

Hi experts
Can anyone help me to tell me:
How to make IP can take a value of the first record/occurrence and the last record in CSV file?
I need to take the first and last to put StarTime of first record y StopTime of last record in the target file
This is my Original CSV File
20110820,220DNE0220,140.13 ,0.000 ,E01,0
20110820,240FGC4280,103.80 ,0.000 ,E01,0
20110821,220DNE0220,142.58 ,0.000 ,E01,0
20110821,240FGC4280,88.70 ,0.000 ,E01,0
20110822,220DNE0220,151.92 ,0.000 ,E01,0
20110822,240FGC4280,91.47 ,0.000 ,E01,0
Where:
The firts field is date.
I require it so my Target File
20110820,20110822,140.13 ,0.000 ,E01,0
20110820,20110822,103.80 ,0.000 ,E01,0
20110820,20110822,142.58 ,0.000 ,E01,0
20110820,20110822,88.70 ,0.000 ,E01,0
20110820,20110822,151.92 ,0.000 ,E01,0
20110820,20110822,91.47 ,0.000 ,E01,0
Thaks..

Hi lizcam,
A. Use FCC at sender side, it will convert CSV to XML like this
Input XML
<documentName>
<recordset>
<record>
<Time>20110820</Time>
<ID>220DNE0220</ID>
<Quan>140.13</Quan>
<Volume>0.000</Volume>
<Auc>E01</Auc>
<No>0</No>
</record>
</recordset>
</documentName>
Create a target DT like this
Output XML
<recordset>
<record>
<StartTime>20110820</StartTime>
<EndTime>20110822</EndTime>
<Quan>140.13</Quan>
<Volume>0.000</Volume>
<Auc>E01</Auc>
<No>0</No>
</record>
</recordset>
In MM,
1.Time -> CopyValue[0] -> StartTime
2.Time -> below UDF -> EndTime
3.Quan -> Quan
4.Volume -> Volume
5.Auc -> Auc
6.No -> No
UDF u2013 Execution type u2013 All values of Queue
public void getLastTimeValue(String[] inputEndTime, ResultList result, Container container) throws StreamTransformationException{
result.addValue(inputEndTime[inputEndTime.length-1]);
B. At receiver use again FCC to convert XML to CSV.
FYI. If you want to optimize more, you can use
1.globalContainer concept OR
2.u201CAttributes and Methodsu201D, declare are String. Store the EndTime using one UDF and write another UDF to retrieve it.
Regards,
Raghu_Vamsee

How to get return value from java and read by other application?

i want to read return value from java and the other application read it.
for example:
public class test_return {
    test_return(){
    public int check(){
        return 1;
    public static void main(String args[]){
       new test_return().check();
}from that class i make as jar file. How to read the return value (1) by other application?
thx..

If your installer is requiring some process it invokes to return a particular value on failure, then the installer is seriously broken. There are a bazillion commands your installer could invoke, and any of them could fail, which in turn could invalidate the entire install process, and any of them could return any value on failure. The only value that's consistent (in my experience) is that zero means success and non-zero means failure, with specific non-zero values being different in different programs.
About the only control you have over the JVM's exit code is that if your main method completes without throwing an exception, the JVM will have an exit code of 0, and if main throws an exception (either explicitly or by not catching one thrown from below), it will be non-zero. I'm not even sure if that's guaranteed, but I would guess that's the case.
EDIT: I'm kind of full of crap here. If you're writing the Java code, you can call System.exit(whatever). But nonetheless, if your installer requires certain exit codes from any app--java or otherwise--you have a problem.
Edited by: jverd on Oct 29, 2009 1:27 AM

How to define source value for filtered recordset (ASP)

Hi,
I'm using ASP & CS4. I have a search page which upon submission sends form parameters to a results page. The results page matches the search parameters to a recordset and returns the appropriate record/s.
How can I take one of the values from the returned filtered recordset (which wasn't one of the original variables/parameters), and use it as a value to filter another recordset from another table? Do I have to create a parameter from that value, or can it be done in a SQL statement?
Many thanks

How many results are returned from the first recordset? Where is the second recordset to be displayed?
If the first RS returns a single row and the second RS is displayed on the same page, you don't need to create anything. Just use the value of the column you want in the SQL statement. If you need to pass the value to another page, you can either set a session variable or pass the value in the querystring.

How to get Date value from database and display them in a drop down list?

Hello.
In my Customers table, I have a column with Date data type. I want to create a form in JSP, where visitors can filter Customers list by year and month.
All I know is this piece of SQL that is convert the date to the dd-mm-yyyy format:
SELECT TO_CHAR(reg_date,'dd-mm-yyyy') from CustomersAny ideas of how this filtering possible? In my effort not to sound like a newbie wanting to be spoonfed, you can provide me link to external notes and resources, I'll really appreciate it.
Thanks,
Rightbrainer.

Hi
What part is your biggest problem?? I am not experienced in getting data out of a database, but the way to get a variable amount of data to show in a drop down menu, i have just messed around with for some time and heres how i solved it... In my app, what i needed was, a initial empty drop down list, and then using input from a text-field, users could add elements to a Vector that was passed to a JComboBox. Heres how.
package jcombobox;
import java.awt.*;
import java.awt.event.*;
import java.util.Vector;
import javax.swing.*;
public class Main extends JApplet implements ActionListener {
    private Vector<SomeClass> list = new Vector<SomeClass>();
    private JComboBox dropDownList = new JComboBox(list);
    private JButton addButton = new JButton("add");
    private JButton remove = new JButton("remove");
    private JTextField input = new JTextField(10);
    private JPanel buttons = new JPanel();
    public Main() {
        addButton.addActionListener(this);
        remove.addActionListener(this);
        input.addActionListener(this);
        buttons.setLayout(new FlowLayout());
        buttons.add(addButton);
        buttons.add(remove);
        add(dropDownList, "North");
        add(input, "Center");
        add(buttons, "South");
    public void actionPerformed(ActionEvent e) {
        if (e.getSource() == addButton) {
            list.addElement(new SomeClass(input.getText()));
            input.setText("");
        } else if (e.getSource() == remove) {
            int selected = dropDownList.getSelectedIndex();
            dropDownList.removeItemAt(selected);
    public void init(String[] args) {
        setSize(400,300);
        getContentPane().setLayout(new BorderLayout());
        getContentPane().add(new Main());
}And that "SomeClass" is show here
package jcombobox;
public class SomeClass {
    private String text;
    public SomeClass(String input) {
        text = input;
    public String toString() {
        return text;
}One of the things i struggled a lot with was to get the dropdown menu to show some usefull result. If the list just contains class references it will show the memory code that points to that class. Thats where the toString cones in handy. But it took me some time to figure that one out, a laugh here is welcome as it should have been obvious :-)
When the app is as simple as this one, using a <String> vector would have been easier, but this is just to demonstrate how to place classes in a vector and get some usefull info out of it, hope this answered some of your question :-)
The layout might have been easier to write, than using the toppanel created by the JApplet and then the two additional JPanels, but it was just a small app brewed together in 15 minutes. Please comments on my faults, so that i can learn of it.
If you need any of the code specified more, please let me know. Ill be glad to,

How to Take source value remove zero and use it In receiver Determination

Similar Messages

Maybe you are looking for