How to tell if you are saturating g5 bus

Hi,
I went ahead and hooked up an OWC Enterprise RE SSD 50 gb drive on the board controller. I am still hoping the Delock Sata2 adapter will work but I thought i would try it with out to compare, After instal I xbenched it, and got a combined score of 152.53. Although It seems as if I remember xbench getting some criticism for its accuracy I will post the report anyway. Does this show the sata1 bus being saturated by the SSD or is this not the correct way to test for it.

Ya, I was just B**ch7678. I just needed a big drive to park info on so i could re-initialize on of the 2 tb drives that went into the following RAID 1 numbers of my 2320.
Here are the numbers:
Results 114.36
System Info
Xbench Version 1.3
System Version 10.5.8 (9L31a)
Physical RAM 12288 MB
Model PowerMac11,2
Processor PowerPC G5x4 @ 2.50 GHz
L1 Cache 64K (instruction), 32K (data)
L2 Cache 1024K @ 2.50 GHz
Bus Frequency 1 GHz
Drive Type HPT DISK 1_0
CPU Test 150.40
GCD Loop 114.56 6.04 Mops/sec
Floating Point Basic 167.56 3.98 Gflop/sec
AltiVec Basic 329.42 13.13 Gflop/sec
vecLib FFT 127.92 4.22 Gflop/sec
Floating Point Library 129.97 22.63 Mops/sec
Thread Test 214.66
Computation 259.53 5.26 Mops/sec, 4 threads
Lock Contention 183.02 7.87 Mlocks/sec, 4 threads
Memory Test 159.90
System 167.87
Allocate 233.98 859.24 Kalloc/sec
Fill 238.67 11604.71 MB/sec
Copy 106.30 2195.67 MB/sec
Stream 152.64
Copy 150.05 3099.29 MB/sec [G5]
Scale 148.01 3057.84 MB/sec [G5]
Add 154.55 3292.18 MB/sec [G5]
Triad 158.38 3388.14 MB/sec [G5]
Quartz Graphics Test 175.72
Line 137.63 9.16 Klines/sec [50% alpha]
Rectangle 171.84 51.30 Krects/sec [50% alpha]
Circle 157.76 12.86 Kcircles/sec [50% alpha]
Bezier 149.77 3.78 Kbeziers/sec [50% alpha]
Text 424.90 26.58 Kchars/sec
OpenGL Graphics Test 103.90
Spinning Squares 103.90 131.81 frames/sec
User Interface Test 155.62
Elements 155.62 714.22 refresh/sec
Disk Test 45.64
Sequential 123.53
Uncached Write 122.19 75.02 MB/sec [4K blocks]
Uncached Write 175.98 99.57 MB/sec [256K blocks]
Uncached Read 69.20 20.25 MB/sec [4K blocks]
Uncached Read 246.06 123.67 MB/sec [256K blocks]
Random 27.99
Uncached Write 8.70 0.92 MB/sec [4K blocks]
Uncached Write 65.66 21.02 MB/sec [256K blocks]
Uncached Read 128.51 0.91 MB/sec [4K blocks]
Uncached Read 200.07 37.12 MB/sec [256K blocks]
So sorry, about the PC people poke as I have always(cough) gamed on a PC. Mac actually, after all, first went usb on imac g3's and dumped the floppy drive.

Similar Messages

How to tell if you are running an exe or vi

My searching skills suck today.
I am building an exe using the application path to find certain files that need to be included. It works great in the exe, but when making changes to the VI all the paths are broken because of the application path. But I remember back a while someone had a way to tell if you were running the program as a VI or an exe. Then when the program starts it can choose the correct paths to use.
Any ideas on how to do that? Or is there a better way to run the program as a VI and an exe without breaking paths?
Thanks
Solved!
Go to Solution.

Drop a property node of the 'Application' class, select Application->Kind. The output is an enum of Development vs. Runtime vs. Student vs. Embedded... you get the idea.
Best regards,
Dave
David Boyd
Sr. Test Engineer
Philips Respironics
Certified LabVIEW Developer

How do tell if you are on wired vs wifi

Hi, I have a mac mini 2010. I have it wired into an Airport extreme and I also have the WiFi on. How do you know for sure if you are using one vs the other? Meaning, I'd like to get the speed from the direct connection when browing the web at my desk. Should I turn off the Wifi?
Thanks.

Turning off the Wi-Fi on your computer will insure that the Ethernet connection is active.
Unless you have changed some settings on your Mac, if both Ethernet and Wi-Fi are "on", the Mac will automatically default to the Ethernet connection over wireless.
To see if your Mac is setup to do this.....
Open System Preferences (gear icon on the dock)
Open Network
Click the small gear icon at the bottom of the connection list
Select Set Service Order
If Ethernet is at the top of the connection order list, then your Mac will default to Ethernet whenever you connect an Ethernet cable to it....even if the wireless is on at the time.
Still, it makes sense to turn off the wireless on the Mac if you don't need it.

How to tell if you are buying Nano with slip case... I think...

So I bought a 2GB black Nano at Best Buy on Saturday, and the center button acted funny, so I returned it about 2 hours ago. They had no more in stock, so I got my refund and went to Circuit City. They had tons in stock. But this is what I noticed: on both the front and back of the NEW Nano box there is a silver Apple logo in the upper right corner. There were NO silver apples on the box I got from Best Buy. And even the clerk at CC knew what he was doing because he pulled it out from behind 2 Nano boxes with no apples.
So when I opened the box, I saw my SLIP CASE! I have an iSee Nano on order, but this will do in the meantime.
I hope this helps you all!!!!!
Ken

Well it is hard if you are ordering it online like I did (but I ordered it online way before the slip cases anyways).
And until you get you iSee nano case, DO NOT REMOVE THE THIN PLASTIC COVER THAT COMES ON THE FRONT OF THE NANO. Even if you do have the slip case.

How to tell if you are buying a full version or upgrade

buying adobe premiere pro cs3 - how can you tell from the numbers on the packaging if it is a full version (commercial) or educational or just an upgrade, I was on hold for nearly 2 hours with adobe customer service and nobody picked up.
cheers

Are you buying from the Adobe Store? The package WILL state whether it's the full, an upgrade (see Phil's comment), or the eductional version.
Are you buying from a certified reseller? The package SHOULD give the full details.
Are you buying from eBay? Who knows what you'll get, or whether it will work?
Are you buying from an individual? Other than asking them, and trusting them, I'm not sure that there's a way to tell. Maybe a certain UPC on a clean shrink-wrapped box could yield a clue.
Note: if you need a key-gen, or similar, for the installation key and for a S/N, it will certainly be bogus. I realize that you know this, but I felt that I had to include it for any others.
Good luck,
Hunt

Change Data Capture How to Tell which you are running Sync or Asyn

Hi ,
I am taking over a new system that has change data capture running, but Im really confused how this is running. Most of the CDC is set up using Sync(triggers), but I have about 5 tables that DO NOT have system generated triggers on them. I know Streams is NOT running/configured. I know Capture is not running/configured (because nothing in DBA_CAPTURE table). I can tell that these 5 tables are still getting updated in the change table schema. I can not figure out how the 5 tables that DO NOT have triggers on them are updating the change data set tables.
I had thought the the 5 tables, must be configured with HOTLOG, but when I look at the CHANGE_SETS table they all (including these 5 tables) are set to CHANGE SOURCE NAME = SYNC SOUCE. I would expected that to be HOTLOG_SOURCE. So I "assume" they aren't set up using Asnc. hot log mode. So maybe the other Async modes are used, but not pushed to another database? Is that possible?
Any other ideas on how to figure out how the CDC is set up for these 5 tables?
thanks for your help.

Thanks for the reply, but I think I must have not stated the problem clearly. I dont WANT to set the source I want to figure out how this CDC is working. I see ALL the sources are currently set to SYNC_SOURCE. Almost all of the tables are set up with system triggers on them, but 5 dont have system triggers, yet the source says SYNC_SOURCE. I did validate that the change tables are getting updated for these tables. my question is how are they getting updated? I "assume" since they dont have system triggers ont eh table they aren't synchoronus cdc (like the other tables are). yet the source says SYNC_SOURCE. What am I missing? How can I tell if the redo log is populating those changes tables? Im pretty sure it is (Becuase there aren't triggers or jobs running), but Im curious if there is a way to tell for sure.
Thanks,

How to tell if you are buying a 5th or 5.5gen iPod.

I'm looking to buy a new iPod, upgrading from my trusty 3rd gen. I want to buy a 30gb model but is there anyway I can tell between the new ones and the old ones? The only store near me is known for selling outdated products so I want to be sure.
Thanks

I am really glad that someone asked this question. I have just been given my Christmas prezzie early, and I was slightly worried that it might not be the 5.5 or Sept 2006 version.
Anyway, I have a very cheeky picture of Mr Depp on the box complete with the tricorn hat, and my serial number ends in V9P!
(My main concern was the extra resolution for the movies which as doubled i believe from the first version).
Thanks

How do you tell whether you are on an iPad or an iPhone?

HOw does one tell the hardware you are running on, iPhone vs. iPod Touch vs. iPad? and how does one do this in such a way that it won't break later on as later revisions of the iPhone etc are released. Does apple have a generic + specific hardware coding system? Remember the old Carbon Gestalt() calls?

Suggest using the confidential forums that are currently in place for iPad questions, etc.
https://devforums.apple.com/community/iphone
As well, if you feel comfortable working with beta software, take a look at the latest release and the associated docs in the Dev Center.

How to tell what fonts are missing in a Photosohp CS5 document?

Hello! I have received some work from a graphic designer. I need to modify some of the text in the document. When I open the document I get an error message:
Some text layers might need to be updated before they can be used for vector based output. Do you want to update these layers now? [Update] [No]
If I click [Update] it replaces the font with Myriad Pro. If I click [No] the text looks the way the designer intended, but I have the exclamation mark-triangle symbol over the layer with the text. If I try to edit the text I get another warning:
Editing or rendering the text layer "Text Layer" will cause its layout to change. Continue? [Cancel] [OK]
The same behavior described above occurs. If I click [Cancel] I obviously can't edit the text. If I click [OK] it changes the font to Myriad Pro.
I would like to determine what font the layer is using. I could swear that previous versions of Photoshop would tell me what fonts were missing when I opened a document. I can't use the text tool to select the text without it changing the font. Other posts have mentioned using the text tool to look at the text drop-down to find a greyed-out font which indicates the missing font. I do not have that. I only have perhaps 200 fonts installed. Can anyone tell me how to determine what fonts a .PSD document is using? I would prefer not to bug the graphic designer if possible. Thanks much!
~ Dan

Not sure why you are getting ""Font is present on the system but requires a layout change.", usually you do not get that instead the name of the font shows.
We use extensis Universal Type Client, so the fonts load automatically upon opening files, and never really get missing fonts in Photoshop.
Actually fontbook has auto font loading if you want to give that a try. Fontbook >> Preferences

How to tell which maps are the latest?

I have Maps v3.01 loaded on my 6710 Navigator (came with free worldwide licence) and Map Loader v3.0.28 on my PC.
How do I tell which maps are loaded on my Nokia and what version/date the maps availalble on Map Loader are?
Map Loader does not state which maps are already on my phone, nor does it state the date or version of the maps which can be uploaded.
Obviously, I'd like to install newer versions of my country map if and when it is available, but how do I know which version is available and which I already have?
Ovi.com does not seem to be the answer either as all maps were downloaded using Map Loader.
Solved!
Go to Solution.

If you already have a free worldwide license and V 3.01 is working well for you then you are right to leave it for the moment. I hear of problems searching for addresses etc with V3.03. Can always update later when everything is sorted.
I believe if you delete all your maps and then use Ovi Suite to download new maps, Ovi Suite will at least tell you what maps you have on your phone. I haven;t tried it myself because I can't stand Ovi Suite.
Speed warning is available for Ireland but just like you I have to import the speed camera locations as landmarks. Hopefully, we will see these as new features in future updates.

Amber Update: How to tell if you have it

I just got a replacement 928 and it went through some updates and now shows the phone is up to date. I have some of the amber features like clock on the lock screen but do not have double tap to wake. In extra+info it shows nokia enhancements but does have any reference to amber. Can someone tell me how to tell if I have amber? Thanks in advance for your help.

Ok, so, here is what I found. Apparently, the issue is was in the replacement and the backup.
So, when I restored my replaced phone data, I noticed there were some downloads in the app store that had errors and weren't updating. Thinking this was just because I didn't have the Amber update yet, I left them, thinking they'd update when my OS updated. After a few weeks, I finally gave up, and removed the downloads. Low and behold, the moment I removed them, I had a ton of new updates, some of which were Amber features. Once I let the new apps update, I checked, and I now have Lumia Amber. Apparently, I had the OS, but the individual app features couldn't update, because of the download errors. Once I removed that, it was fine.
So, in summary, if you have replaced your phone, but it doesn't seem to be updating to Amber, go into your App store, and check your downloads page for any errors, if there are any, it should tell you on the front page of the App store. If there are errors. Press and hold to remove each individual error. Once done, you should have new updates available. Once those updates are done, you should now have Lumia Amber.
Good Luck :-)

How to block the " you are lucky visitor" popup each time I open the Firefox. I can not find any information in the add on lists et al. Thanks!

Recently, my Firefox browser v25.0 is experiencing a popup problem. A popup message saying "... you are today's luck visotor, please click Ok to ontinue". I have to click Ok then I can continue to use the browser. Is this a popular problem? Please advise how to block this popup. Thanks!

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

New to Macs..how to tell if you have a virus or not?

I'm used to PCs which are virus ridden and sometimes you don't even know you have a virus on a PC. I was wondring if Macs have the same problem and if there is a way to tell if you have a virus or not. Anyone know?

Jack Q,
Like almost every operating system, OS X is vulnerable to viruses:
It's just not as vulnerable or attacked nearly as often as, ahem, Brand X.
What could you do if you suspect attack?
You could report your symptoms in this forum after the fact.
You could download a good antivirus scanner and check your machine for viruses.
Or...
You could take the preventive measures of:
1. creating a separate administrator account and making the account you use a normal user account,
2. locking down your OS X firewall,
3. using a properly configured NAT router between your computer and the Internet,
4. oh, and downloading and installing a good antivirus scanner (like this one),
since Apple recommends using antivirus software, and turning on Folder Sentry.
-Wayne

How do I resolve: You are not permitted to open this document. It may be assigned to another user."

I am the only user on a computer, and have ordered two codes on line, and used them for a long time. Recently redid hard drive, and now I cannot open those two files only. I get the message: "You are nbot permitted to open this document. It may be assigned to another user." I am the only user, and maybe the name of the computer is different. How can I resolve this by accessing what permission and what user it is talking about.
Thanks to anyone who may be able to assist.
Gary

Thanks for your answer, however the user currently have the next configuration to sales documents flow:
Sales - A/R     Various Authorizations
Sales Quotation     Read-Only
Sales Order     Read-Only
Purchase Order Confirmation     Read-Only
Delivery     Read-Only
Return     Full Authorization
A/R Down Payment Invoice     Full Authorization
A/R Invoice     Full Authorization
A/R Invoice + Payment     Full Authorization
A/R Credit Memo     Full Authorization
A/R Reserve Invoice     Full Authorization
Document Generation Wizard     Full Authorization
Document Draft     Read-Only
Document Printing     Full Authorization
Dunning Wizard     No Authorization
Execute a dunning run     No Authorization
Sales Reports     Full Authorization
Sales Analysis     Full Authorization
Backorder Report - Selection Criteria     Full Authorization
Checking the configuration, this user can create for example AR invoices, but could not see previous records and neither the created by him. Using the Open Item list, the user can see the documents but can not open it. In the other hand the system has not activated the data onwership function.
Regards,
Manuel

Tell if you are far away from GPS-coordinates

I am thinking of building an iPhone app. Today I saw a man sitting on the bus, and he fell asleep. After plenty of bus stops he woke up.
I want to make an app that gives you an alert before you reach the place you are reaching (by map) and that will be GPS-coordinates I guess. Lets say 500m before.
Is it possible?
Message was edited by: cordoprod

MapKit provides the basics for determining location.
The app would need to know the latitude & longitude of the destination, then it would simply compare the current location...just like any GPS app.
When the offset equals a certain distance, an alarm is triggered such as"You are approaching your destination"...just like any GPS app/device that has a clear view of the sky.
As long as no one calls the phone to say "You are approaching your destination" when the user is 1,501 yards away from their stop, the app could tell the user "You are approaching your destination"...just like any good GPS app.

How to tell if you are saturating g5 bus

Similar Messages

Maybe you are looking for