How to tell JEditorPane finishes loading a text page?

I have this code to identify when JEditorPane has finished loading and html page. However it does not work for a text file. Does anyone know how this can be resolved?
public void propertyChange(PropertyChangeEvent e)
     if (e.getPropertyName().equals("page"))
          // add code here
Thank you for your help

Try using document property instead of page property. If your requirement is a synchronous load of a document on JEditorPage, do something like this:
/* extend HTMLEditorKit */
public class HTMLEditorKit2 extends HTMLEditorKit{
  public Document createDefaultDocument(){
    HTMLDocument doc = (HTMLDocument)(super.createDefaultDocument());
    doc.setAsynchronousLoadPriority(-1); //同期ロードを指定する
    return doc;
//reguster it
JEditorPane.registerEditorKitForContentType("text/html", "HTMLEditorKit2");
JEditorPane jep = new JEditorPane();
jep.setEditorKitForContentType("text/html", new HTMLEditorKit2());

Similar Messages

  • How to tell when the load to start

    Hi,
    don't even know where to look for the answer, so I apologize
    if this topic was already opened. Here's my case. In main flash
    movie load another flash movie, where different items come from
    left and right side of the screen (full screen window). After a
    click on one item, all the item go the sam eway off the screen and
    another movie loads. Question. How to tell the flash that first all
    the items must go off the screen and then unload that movie and
    load the new one?
    THX for the help

    jo3 wrote:I'm curious to know what time my system lost power, whats a good way to tell? I have been checking the logs to get the last entry times but was curioius if there were other methods of telling when the box's power was interrupted?
    A rather ghetto way of doing it:
    #!/bin/bash
    log="/var/log/uptime-poll"
    pollsecs=10
    echo $$ > /var/run/uptime-poll.pid
    if [[ -f "$log.tmp" ]]; then
    echo "Lost power at: `cut -d';' -f2 "$log.tmp"`" >> "$log.log"
    fi
    while :; do
    date +'%s;%D %T' > "$log.tmp"
    sleep $pollsecs
    done
    ...and in /etc/rc.local.shutdown...
    killall $(cat /var/run/uptime-poll.pid)
    rm /var/run/uptime-poll.pid
    rm /var/log/uptime-poll.tmp
    Last edited by Wintervenom (2009-08-29 06:37:29)

  • Safari will not finish loading some web pages

    I just bought a new macbook pro. As soon as I got it I started installing programs I use (photoshop, lightroom, Chrome, Firefox, etc).  It seemed that from the beginning Safari didn't work properly, but in reading more about my problem maybe it's because I have downloaded programs that changed Safari.
    Some web pages work fine, but some don't.  For instance, even the Apple.com site won't load all the way in Safari.  Links or images will be missing.  I tried to fill out a form and when I got to the bottom of the page the "submit" button was missing and I couldn't submit the form.  I try the same page in Chrome and it works just fine.  Firefox is even worse at loading the website though.
    I've been trying to read other people's questions to figure it out but no one seems to have the exact same problem.  I tried changing the DNS and reinstalling Safari and it made no difference.  Then I read some advice from Linc Davis to create a guest user.  I tried loading Apple.com in Safari under the guest user and it worked perfect.  Then I tried booting in safe mode as Linc Davis suggested others do and I still had the same problem with Safari, no improvement.  At least I think I was in safe mode.  I turned off my computer and when I turned it back on and heard the chime I held down the shift key.  The grey apple screen came up with the gear turning, but when it came to the log in screen it didn't say "safe mode."  Is there any indication to tell you you are indeed in safe mode?
    Any way I restarted normally and can't figure out how to fix Safari.  Any suggestions? Linc Davis?

    To anyone who has this same question, I had to find the answer on my own and thought I would post it for you.  I was kind of annoyed that Apple wouldn't even try to help me.  After searching forever on Apple's support pages I finally did a google search and went to some outside sources to find the answer.  I narrowed down that the problem Safari was having was not being able to load images on any website.
    Here was the solution:
    I opened Finder
    Opened the Go menu and held down the option key to open the hidden Library folder
    Opened Preferences
    Then I deleted all the com.apple.Safari files (there were 4)
    Ta Dah! Safari instantly works again.  Hope this can help someone else out in my predicament.

  • Browsers not loading images, pages loading like text pages.

    I've had an issue for months now that comes and goes where images will not load on any browser I use. When the issue comes up, I'll open all the browsers I have to find its occuring on all of them, they are: Safari, Chrome and Firefox.
    I'm also getting an issue where pages will load like a text or source page. I've tried clearing the cache and resetting Safari, restarting my iMac, but it doesn't work. Then when I used the computer later in the day it'll be fine, it's an issue that comes and goes throughout the day and I'm not sure what's causing it or how to fix it.
    Any help will be appreciated, thank you.

    Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

  • Why does Safari never finish loading a web page??

    I have noticed this problem more and more of late. As I type, the blue in the Address bar is only about 3/4 complete. No matter where I roam, the result is the same.
    As far as I can tell, this page should be completely loaded, but yet the Address bar is still blue.
    Any comments or suggestions will be greatly appreciate.
    Thanks.

    Ok! I followed your instructions to the letter. I found Onyx in many places, but I downloaded it from Apple's website, which made me feel a lot better about the download.
    Bottom line: After my PB re-started, I went back to a forum that I frequent daily
    http://painterfactory.com/forums/
    several times and VOILA!, I can now load each page of that website in a flash. Even this page's Address header is completely loaded (white). Amazing. I may have heard about Onyx, but there are SO many Mac apps these days that it's very difficult to keep up.
    Can you expound on the Onyx briefly?
    You post made my day! I appreciate it very much.

  • How can I have the loading of a page CLEAR ALL session variables?

    Hi,
    At the time of logging in it needs to reset all session state or at least my collection.
    I thought it would be a quick easy thing to clear session state????

    I found it:
    1.) Goto the page of desired Session State clearing.
    2.) Select the + after "Processes".
    3.) Select "Session State" category.
    4.) Select whatever you desire to do!
    Clear Cache For Applications (removes all session state for listed applications)
    Clear Cache For Current Application (removes all session state for current application)
    Clear Cache For Current Session (removes all state for current session)
    Clear Cache for Items (ITEM,ITEM,ITEM)
    Clear Cache for all Items on Pages (PageID,PageID,PageID)
    Reset Preferences (remove all preferences for current user)
    Set Preference to value of Item (PreferenceName:ITEM)
    Set Preference to value of Item if item is not null (PreferenceName:ITEM)

  • How to load a text file int JEditorPane and highlight some words (Urgent !)

    I want to load a text file into a JEditorPane and then highlights some keywords such as while,if and else.I am using an EditorKit in order to style the JEditorPane. I have no difficulty while giving the input through the keyboard but lots of exceptions are thrown if i try to load the string from a file.

    Hi,
    I think the setCharacterAttributes(int offset, int length, AttributeSet s, boolean replace) will solve the problem.
    You can create your own Styled Document and set it to the Editor Pane.

  • TS2755 With the new IOS7 how do i tell which phone number my text messaging is being sent to? on the old system the number used to be highlighted, now nothing is highlighted and i have ended up sending texts to my friends international numbers instead ???

    With IOS7 I am finding it impossible to (a) tell which number I am texting, when my contacts have multiple phone numbers, i dont know wether it si their home , monile/cell or international number... How do i differnetiate or know which number it is, especially when they text me from abrioad and i replying ...its not very clear adn has cost me extra in international charges

    Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change. 
    I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
    for her (using Linux) and...
    got a new error code. Darn I was so sure I had found a clever solution this time lol.
    Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
    first so I could put them back if needed) to her new PC and the PC would not boot. 
    It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll. 
    ntdll.dll however seems necessary for Win7 to boot.
    So what I am wondering now is:
    Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
    the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
    dll's  path to the files it needs? 
    Willing to try any other options or settings you may have come up with as well.
    Thanks again for your reply and my apologies for not answering sooner.

  • Need to know when text has finished loading

    The following code loades text into a textfield the problem I'm having is the routine at the bottom runs before the text loads and the scrollbar disappears even when there's enough text to overflow the textfield.  How would I make sure the text has finished loading before running the code that enables/disables the scrollbar?
    mainText.htmlText = main[1];
    textFieldLength = mainText.text.length;
        if(mainText.length > textFieldLength){
            mainScroll._visible = true;
        }else{
            mainScroll._visible = false;

    I messed up the example.  All I really need to know is how can I determin when a dynamically textfield overflows.

  • I have enhanced standard master datasource , How to load the Text for it?

    Hi Experts,
    I had enhanced 0MATERIAL_ATTR with ZTGRM field.User exit is written and the data is populated and checked in RSA3.
    Replicated,loaded in BW side.Activated the master data.It shows only the attribute not the text.
    Tried loading 0material_text and loaded successfully, activated but while maintaining the master data , i can able to see only the attribute values not the text.
    Can any one help how to load the text for the enhanced attribute?
    Thanks in advance
    Ganesh Kumar

    Hi Tony,
    Loaded the 0MATERIAL_TEXT ,also sucessful.
    After loading activated the 0material but i could only see values for 0material_attr not for the 0material_text.
    Can you tell me how to load the text data to the newly enhanced attribute???

  • How to load long text in BOM line item

    Hello Experts
    How do i load Long text in BOM Line item using LSMW
    Thanks
    S
    Edited by: Alvaro Tejada Galindo on Jan 31, 2008 5:11 PM

    Use Read_text function module.
    you need to pass
    ID
    LANGUAGE
    NAME
    OBJECT   to the function moduel
    To find the Text id name language and object these are the following steps. Example: FB02
    1. goto FB02, Enter Document number
    2. from menuselect Goto>Header-->header Text..... New window will be displayed 
    3. select the Header Text. here you can see all the text. 
    4. click on the TEXT (which you want to know the Text id) , then press log ICON (you can find in bottom right of the text window) it looks like a rolled paper. 
    5. in the Next window you will find Text Name. Text ID, Language. etc...
    Regards,
    Lalit Mohan Gupta.

  • How can I use sql loader to load a text file into a table

    Hi, I need to load a text file that has records on lines tab delimited into a table. How would I be able to use the sql loader to do this? I am using korn shell to do this. I am very new at this...so any kind of helpful examples or documentation would be very appreciated. I would love to see some examples to help me understand if possible. I need help! Thanks alot!

    You should check out the documentation on SQL*Loader in the online Oracle document titled Utilities. Here's a link to the 9iR2 version of it: http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/server.920/a96652/part2.htm#436160
    Hope this helps.

  • How to load a text file?

    I'm trying to load a text file and I've run into a wall. So
    far, I've loaded swf files, image files and XML files without
    problems. But the text files just don't seem to load.
    It's not a tough situation. The files are in the same
    directory as the application. When I run it, I see no sign that the
    file has loaded, but haven't found the error trapping to tell me
    what is (not) going on.
    The code below was culled from examples on the web, they seem
    fairly consistent, and they are copied pretty much exactly. and I
    put them both into a single action to test them.
    Any clues as to what is not happening? I need to read an old
    txt data file that was used with AS2, with pairs of names and
    variables. The first example just reads a couple of variables. The
    second just reads some random text. I'm just trying to see what
    works here, so I can incorporate working code into the real
    program.
    Thanks for your help.

    Thanks Joergen,
    I put in the changes you suggested and still no sign that the
    files are even being opened., but it's very good to have the
    feedback. Just the fact that someone is getting them to run gives
    me confidence in the basic code. I'll hack on it more and let you
    know what the answer turns out to be for me.
    Thanks.

  • I  am using the G Drive Slim to back up my files, but I don't know how to tell if or when it is finished.  The white light does not change, flicker, go out, etc.  When is it finished?

    The whole story:  The hard drive on my quite new Mac Book Pro, bought in December of 2011, crashed and burned in the Fall of 2012.  I purchased a new hard drive  and was informed that the only way I could have saved my "stuff" was to back it up with an external hard drive.  Who knew?? I bought a G Drive Slim at the Apple store, and on their advice.  BUT I  really don't understand how to use it, and the instructions are completely inadequate.  How can you tell when it is finished?  I have educated myself on the proper way to eject the Drive, but I don't know how to tell if it is done.  Or, frankly, if it is even doing anything.  The white light burns steadily, no blinking, no flickering.  Nothing.  Thanks for  help. 

    are you backing up files, or doing a Time machine backup, either way, the Time machine will STOP when finished and show "last backup at XXXXXX"  meaning its done...... OR if when transferring files, it will show a progress bar on your desktop and vanish when files are copied.
    Open up the Hitachi drive (your G drive is made by Hitachi, and the best made by the way).....and see if the files are there.
    a MORE VISUAL way is to open the hard drive file, and drag and drop files INTO the Gdrive and you can see them visually be copied there as you do it.
    To see your HD on your desktop GOTO  FINDER......PREFERENCES....then GENERAL TAB.........check the box marked HARD DRIVES.........then your Gdrive will appear on your desktop........open it from there,  and DRAG and drop files from anywhere INTO the Gdrive....... easy visual way to see the files being copied into the Gdrive.

  • How to find out that sequence has finished loading?

    Hello,
    i have a custom C#-OPUI to load and execute testplans.
    I do this using these funtions:
    1. ApplicationManager.OpenSequencFile(filename)
    2. ???
    3.Command TestStart = axSequenceFileViewMgr.GetCommand(.......)
    TestStart.Execute(true)
    The question is now: How do i know that the OpenSequenceFile has finished doing everything?
    I need to know that is finished before i run the execute-command.
    Is there a specail final-event that i can check?
    Thanks for help
    Solved!
    Go to Solution.

    Hi jigg,
    Thanks for the info.
    In my sequence file, besides the main sequence, I also enabled "SequenceFileLoad" callback. In "SequenceFileLoad" sequence, I added some instruments initialization tests. The goal is to initialize the instruments only once when the sequence file is loaded. Therefore I need to know when the "SequenceFileLoad" is finished or when the sequence file has finished loading.
    My first idea is to use the event "axApplicationMgr_SequenceFileOpened", but I found that I will catch this event before the "SequenceFileLoad" execution finished.
    And then, I also found that together with the execution of sequence "SequenceFileLoad", there are 2 events in my C# code: "axApplicationMgr_StartExecution" and "axApplicationMgr_EndExecution" triggered. So I was thinking may be I can use "axApplicationMgr_EndExecution" to determine if the sequence file has finished loading. But the problem is every sequence execution will trigger these 2 events. The main sequence will also trigger these 2 events. So I needs to know the name/ID of the current executing sequence.
    So Is there a way to read current executing sequence name?
    Thanks and regards,
    0049

Maybe you are looking for

  • Sales by ship to

    Hi , My client requires a report on sales orders where he will enter the sold to party but they want in the report  how much total sales made for this sold to per different ship tos. like the following one : sold to        ship to                    

  • Strange Alert during post on ThinkPad X200

    Hello, I have ThinkPad X200 7454-2HU Yestarday I notice some strange Alert during post process it's somthing like this: Alert Sending Device UDID = C10AC866 5FE839FD 2E8B2E68 1FE8FE9B 00000065 06 Vendor/Device = C8665FE8 Address = 5FE839FD 2E8B2E68 1

  • MOVED: Cooler XP does not support motherbord !! ~ HELP!

    This topic has been moved to VGA products. https://forum-en.msi.com/index.php?topic=121040.0

  • Not possible to unlock lock on admin account

    HELP! I am running 10.6. but recently reinstalled it as time machne made problems. Since then I can't unlock the lock on my admin account, and can't update or install any apps at all, including the software updater for 10.6.1. It just freezes with no

  • Web Cache for 10.1.3 ??

    The Disk (CD) #1 Install for 10.1.3 contains OC4J, OHS and the Admin Console, but no Web Cache. Is the Web Cache for 10.1.3 available on one of the supplemental disks (CD images)? Does a 10.1.3 version of the WebCache exist?