Need to know when text has finished loading

The following code loades text into a textfield the problem I'm having is the routine at the bottom runs before the text loads and the scrollbar disappears even when there's enough text to overflow the textfield.  How would I make sure the text has finished loading before running the code that enables/disables the scrollbar?
mainText.htmlText = main[1];
textFieldLength = mainText.text.length;
    if(mainText.length > textFieldLength){
        mainScroll._visible = true;
    }else{
        mainScroll._visible = false;

I messed up the example.  All I really need to know is how can I determin when a dynamically textfield overflows.

Similar Messages

  • I am using a WD external hard drive for backing up my laptop with Time Machine, but I have to do it manually. How do I know when it has finished the back up? How long should it take?

    I am using an external WD hard drive for backing up my laptop. I have to do it manually, so I can't set Time Machine to just do it for me. How do I know when it is done backing up? How long should this take?

    Triple-click anywhere in the line below to select it:
    tmutil compare -E
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
    Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
    Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
    Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
    At the end of the output, you’ll get some lines like the following:
    Added:
    Removed:
    Changed:
    These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

  • Determine when httpservice has finished loading

    Hi, I have a little dilema, I get the list of countries for a
    form I have, from a database, but I can't set the selectedindex
    because of it's delay loading the data, is there any way to know
    when the loading of data is complete and execute a function
    then?

    When you define your service request put a result handler in
    there. Flex will call your result handler when it's finished.

  • Knowing when repainting has finished

    Hello,
    I want to perform an action immediatley after repainting a Panel is finished (and not during repainting).
    Is there a method that I can call which tells me when the repainting of a component has finished?
    Thanks

    If you are currently repainting and want something to be called when repainting is done, you can use SwingUtilities.invokeLater(...)

  • Knowing when a page has finished loading

    Hi all,
    I've  produced  a small project that has  a  few tabs, each tab contains an IFrame UI, which loads a BW report.
    I've been asked to  add an indicator that should tell when the reports are finished loading.
    I have two problems:
    1. How  do I know when the frame has finished loading the url? I know I can use the OnLoad tag in html, but how can I edit the HTML WebDynpro produce?
    2. What kind of indicator can I use? I thought of two options - Putting the "Progress Clock" which WebDynpro uses when calling an RFC, and for that I need to know if it's even possible  to call that clock.
    The 2nd option I thought  of is using the ProgressIndicator UI, and just divide the 100% to the number of tabs, and change the percent value when each tab  has  finished loading the URL.
    I appreciate any help  that  you  could provide.
    Yaniv

    Armin Reichert -> I've tried what you suggested about the portal integration (I send parameter to an URL Iview, which changes the url), and it works great!
    Thanks.
    Noufal Kareem -> Because I use an IFrame UI which loads a BW report, I don't have an indication (The WD don't know / care if the page inside the frame was loaded.)

  • How can I tell when a JEditorPane has finished loading the document?

    Hi!,
    I've got a JEditorPane connected to a viewport and a couple of scrollbars, and I realy need to know when the JEditorPane has completed loading the document, so that I can decide whether to turn on or off the scrollbars.
    When I try to check the viewport.getView().getWIdth() right after calling setText() or setPage() the values come out wrong... is there an eventHandler that I can register ?
    thanks in advance
    -Miguel

    OK, I'm not an expert. But, why set the scrollbars manually? Would it not be easier to put the JEditPane in a JScrollPane with the scroll policy set to "as needed"?
    Ken

  • How to find out that sequence has finished loading?

    Hello,
    i have a custom C#-OPUI to load and execute testplans.
    I do this using these funtions:
    1. ApplicationManager.OpenSequencFile(filename)
    2. ???
    3.Command TestStart = axSequenceFileViewMgr.GetCommand(.......)
    TestStart.Execute(true)
    The question is now: How do i know that the OpenSequenceFile has finished doing everything?
    I need to know that is finished before i run the execute-command.
    Is there a specail final-event that i can check?
    Thanks for help
    Solved!
    Go to Solution.

    Hi jigg,
    Thanks for the info.
    In my sequence file, besides the main sequence, I also enabled "SequenceFileLoad" callback. In "SequenceFileLoad" sequence, I added some instruments initialization tests. The goal is to initialize the instruments only once when the sequence file is loaded. Therefore I need to know when the "SequenceFileLoad" is finished or when the sequence file has finished loading.
    My first idea is to use the event "axApplicationMgr_SequenceFileOpened", but I found that I will catch this event before the "SequenceFileLoad" execution finished.
    And then, I also found that together with the execution of sequence "SequenceFileLoad", there are 2 events in my C# code: "axApplicationMgr_StartExecution" and "axApplicationMgr_EndExecution" triggered. So I was thinking may be I can use "axApplicationMgr_EndExecution" to determine if the sequence file has finished loading. But the problem is every sequence execution will trigger these 2 events. The main sequence will also trigger these 2 events. So I needs to know the name/ID of the current executing sequence.
    So Is there a way to read current executing sequence name?
    Thanks and regards,
    0049

  • First boot of local zone - how to determine when sysidtool has finished

    Hello,
    we use a /etc/sysidcfg in order to do the solaris base configuration automatically. After the first boot of a local zone I recognized that some tools are started by solaris (sysidtool, etc.) which apply the settings mentioned in /etc/sysconfig.
    Since we want to script some post-install set-ups I need to know, when the first boot including all "first-boot-scripts" has completely finished. Is it possible to query this information, maybe by calliing a special tool or by looking up some string within an logfile?
    I would be grateful for any hints,
    Thomas

    I haven't checked, but I assume they have normal dependencies in the SMF tree so that other services don't start until they complete.
    I would probably look at the milestone/multi-user-server service and see if it's online yet. If it is, they're probably done.
    Darren

  • E-mailing users when data has been loaded.

    Does anyone have some information on setting up FDM to e-mail certain users when data has been loaded for certain locations? Not sure what steps need to be taken to setup the FDM server, FDM and just wondering if there are any generic scripts that can be used.

    You would need to write a custom script to do this. You can use the E-mail Accelerator to do this, and it would need to be included in an event that fires after load.

  • How do you date and time stamp iCal entries?  We share an event calendar and need to know when a new event was entered into iCal.

    How do you date and time stamp iCal entries?  We share an event calendar and need to know when a new event was entered into iCal.

    BKBK,
    Thank you for your response. That does adequately cover the
    client-originated sessions, but still leaves the ability I am
    looking for unavailable.
    It did serve to definitively answer my most pressing
    question, however, with this statement:
    Note: ColdFusion cannot create a session if an initiator
    application uses a SendGatewayMessage method to start an
    interaction with a client, such as an SMS user. In this case, the
    sending code must keep track (for example, in a database) of the
    messages it sends and their destinations. When a response event
    arrives, it can look up the origniatorID to determine whether it
    was in response to an outgoing message.
    I will play around with the Application scope to see if there
    might be a workable solution there.
    RLS

  • I need to know when to sell the new Ipad 3.

    I need to know when to sell the new Ipad 3 ?

    Are you asking when to sell your new iPad (you can sell your iPad whenever you want to), or when it will be sold in your country (which you haven't said where that is) ?

  • Edit in Progress how do I get out or know when it is finished??

    I have just read a plea from some-one which sounds exactly like my problem.  I could never get on with Photoshop Elements 8 so I thought that when version 11 came out it would be simpler...not to me I still have problems with the edit in progress...how do I know when it is finished and how do I get out of screens when I have finished???I have bought the book...got the latest version...have old CD's from my last attempts...but I am still battling with it.
    Picasa on the other hand is great  obviously not as comprehensive...maybe I should have just stuck to that instead of spending money I could ill afford.
    Pensioner...but no that is not the reason   (Ihope)

    When you finish in the Editor, save your work; then click Ctrl+W or use the top menu:
    File >> Close

  • HT201441 dear sir . Ihave bought a dell ipad under serial number DMPKQFF4F186 on 25th of dec.2013,it was packed and seems it was .new,after unpacking i found out it is lock. I just need to know when this serial number has registered in icloud. I will grat

    dear sir . I have bought a dell ipad under serial number DMPKQFF4F186 / UDID : 976ba8f5ba16f665bdf3b1b5ec53a172c9d65381. on 25th of dec.2013,it was packed and seems it was new after unpacking i found out it is locked.Ijust neednto know when this serial number has registered in icloud. I will grateful if you could let me this information. locking forward to your kind response.  With Regards

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Checking wether a JWindow has finished loading all widgets

    Hi,
    I'm writing a class that implements a splash screen. What I need to know is when the main app is fully loaded and ready to work so that I can close the splash. How can I check this? I use several Toolkit.getImage() calls, and as far as I found out I have no way of kmowing if the corresponding image has been loaded.
    Has anyone done this ? Am I going about this the wrong way ?
    thanks in ahead,
    -Miguel

    Thanks!! That solves the images problem!
    But what about the rest of the widgets ? I may have a number of widgets without any images ... is there any way of knowing wether the widgets are loaded and running ?
    -Miguel

  • HT1212 how will i know when ipad has been restored?

    I am trying to restore my ipad.  Itunes has finished downloading the update.  how will i know when the ipad has been restored?

    It has given me an error 3194 - this device is not eligible for the requested build.  What now?

Maybe you are looking for

  • Anomalous conversion chart IGS from GIF to BMP

    I created a graph using the class CL_IGS_CHART and I converted the format to GIF to BMP through the class CL_IGS_IMAGE_CONVERTER: the operation is successful but the background color is turned into purple I think because it is seen as a transparent c

  • Aironet 1300 cannot access by iphone

    I use the aironet 1300. In windows perform it can detected the sid and applied the ip but when i use apple iphone it just detected the sid but cannot apply ip. so how can i do.

  • ERS:Tcode MRRL

    Hi, ERS Process post invoice for all open good receipt without expecting the invoice from vendor. The tcode is MRRL.while runnig this i getting error of base line date. what is cause of error, how to solve this problem. shakir Edited by: Shakir on Ja

  • Adding a custom field in Delivery header

    HI all, I want to add a custom field in Delivery order creation header section. Is there any user exit to add the field in LAyout? which is the program i need to add the new field? thanks in advance Rakesh points will be awarded

  • Finder Crash when launched by iTunes

    After upgrading to Mavericks: Launch iTunes Select "File->Add to Library" Finder opens and suddenly close by itself This issue happens also in Safe Mode I've never had this kind of problem with Mountain Lion Any suggestion ?