How to tell Mutt NOT to encrypt locally saved mails?

Hello,
finally i have managed to setup Mutt with PGP Support, even Enigmail encrypted mails are now being automatically decrypted. But there is one thing that annoys me. I have a full disk encryption (I confess, apart from the boot partition…) so i don't need to locally encrypt the mails with PGP that are in my sent folder. Now all mails that i send are being encrypted with the public key of the recipient, so i'm not able to read then again. How can i change this behavior?
Here is the PGP relevant part of my .muttrc:
set pgp_use_gpg_agent = yes
set pgp_decode_command="gpg --no-verbose --batch --output - %f"
set pgp_verify_command="gpg --no-verbose --batch --output - --verify %s %f"
set pgp_decrypt_command="gpg --no-verbose --batch --output - %f"
set pgp_sign_command="gpg --no-verbose --batch --output - --armor --detach-sign --textmode %?a?-u %a? %f"
set pgp_clearsign_command="gpg --no-verbose --batch --output - --armor --te xtmode --clearsign %?a?-u %a? %f"
set pgp_encrypt_only_command="pgpewrap gpg --batch --quiet --no-verbose --output - --encrypt --textmode --armor --always-trust -- -r %r -- %f"
set pgp_encrypt_sign_command="pgpewrap gpg --batch --quiet --no-verbose --textmode --output - --encrypt --sign %?a?-u %a? --armor --always-trust -- -r %r -- %f"
set pgp_import_command="gpg --no-verbose --import -v %f"
set pgp_export_command="gpg --no-verbose --export --armor %r"
set pgp_verify_key_command="gpg --no-verbose --batch --fingerprint --check-sigs %r"
set pgp_list_pubring_command="gpg --no-verbose --batch --with-colons --list-keys %r"
set pgp_list_secring_command="gpg --no-verbose --batch --with-colons --list-secret-keys %r"
message-hook '!(~g|~G) ~b"^-----BEGIN\ PGP\ (SIGNED\ )?MESSAGE"' "exec check-traditional-pgp" #mutt doesn't recognizes enigmails as encrypted otherwise
set pgp_autosign = yes

Paloran wrote:Now all mails that i send are being encrypted with the public key of the recipient, so i'm not able to read then again. How can i change this behavior?
This is confusing. Mail that you have encrypted to send to another party (using their key) should be readable in your sent items folder.
See my mutt settings: https://bitbucket.org/jasonwryan/shiv/src/tip/.mutt/

Similar Messages

How to tell sapinst not to check and extract Oracle RDBMS CDs

Hi,
I try to install SolMan on a system which I already installed another SAP instance on. From that earlier installation I kept the extracted and "patched" Ora10 staging area, patches, etc., but I removed the original RDBMS CDs (I didn't needed them).
Now SolMan sapinst also requires the Oracle installation material. How can I tell sapinst not to check and extract the Oracle RDBMS CD because the stuff is already in the stage?
Thanx in advance,
Laszlo Molnar

Hi,
The extraction of RDBMS software happens when the SAPINST is taking inputs , before starting installation.
There is check box with the name 'Extract DB software' , you have not uncheck that , by default the check box will be checked.
I dont remember the screen name , but it usually happens when taking inputs for database.
thanks
Prasanna

How to tell "ituneshelper" not to start automatically at startup

To stop iTuneshelper from starting automatically:
1-- Go to System Preferences
2-- Click Accounts
3-- click Login Items tab. This shows all the items that are automatically loaded when you log into your account.
4-- In that list you will hopefully see an item called "iTunesHelper." Apparently this little program has the job of making it so that iTunes can watch for iPods getting plugged in and so on.
5-- to remove iTunesHelper from this list, click on it to select it, and then click the "-" (minus" button) at the bottom of the list.
6-- You just removed that startup item. If you later find that you have problems connecting to your ipod or for some reason you want that startup item back, then you can delete and then re-install iTunes by downloading it from itunes.apple.com (don't worry, it will find your music folder when you reinstall) OR, more simply, you can go to your applications, find the iTunes application, right click it, choose "view package contents," go into Contents folder, then go into Resources folder, then find iTunesHelper.app and drag ituneshelper.app onto that list on the Login Items window that we mention in step 3. That will bring it back onto that list. Then restart your mac and you will see ituneshelper running automatically again.

This setting is here: In Safari push 'cmd'+',' (comma) or click on Safari/Settings in the menu bar...
(sry for german UI, but I think you see where to go )

How can I display not only one account's mail but all in the central inbox?

I am changing from OSX (machines with OSX 1.8.5 and Mavericks) mail to Thunderbird.
However, one feature of OSX Mail I can't find in Thunderbird or have overseen it:
I use several mail accounts, that OSX Mail is showing me on top level in one general inbox.
Below that level, I can of course jump into the different accounts if needed to read mails only related to that account.
Is there a similar view in Thunderbird?
Thanks for any help
Christoph

http://kb.mozillazine.org/Global_Inbox

How do I tell Leopard NOT to connect to a particular local drive?

How do I tell Leopard NOT to connect to a particular local drive?

I don't want my Leopard computer to automatically connect as guest to the Tiger computer.
Leopard does not automatically connect to it. If it shows in the sidebar you are not connected to it. The sidebar is just showing what computers on the network are available to connect to. To connect to it you still have to click on the connect button.
To stop it showing the sidebar you have to turn off file sharing on that mac.

How do I download a movie to my phone? when I click 'rent' through itunes, I get a message that there is not enough available local storage, but I can manage my local device storage usage in 'Settings'. I have activated icloud, but this has not helped.

How do I download a movie to my iphone 3G? When I click 'rent' in itunes, I get a message that there is not enough available local storage, but I can manage storage on my device in 'Settings'. I have activated icloud, but don't know how to change my storage so that I can rent and watch the movie on my phone. thanks for any help you can give.

I always do my Rentals with the itunes program on the computer.
Make rental from itunes store. It will show in movies under library, DO NOT click to play it. Plug in the device to the computer. Click the name of the device on left. Click on movies. There is an option to copy to the device. Sync. obviously you still need space on ipad to put rental but you can have it take computers hard drive space until you need it.

How do I tell iphoto NOT to load ALL images from camea and iphone, only new images?

I've bee using my MacBook Pro, iphoto and Nikon for many years. I travel alot and take many pictures, and like to keep them on the memory cards as an extra backup. All was going great on a recent trip, until one day, suddenly, when I plug camera into computer, iphoto opens (as usual) but it starts downloading ALL of the old images on the memory card instead of just the ones that have not already been imported! It takes forever when you are using a 16GB card!! Is this due to some update I installed? How do I tell iphoto not to do this?! I only want to see images not yet imported, as it used to be. I am using OS X 10.6.8 and iphoto '09 - 8.1.2 And, this same thing is happening with my iphone, and my other camera.

iPhoto does read all images (how else can it know if it has already imported them or not) and then gives your oppertunity to import new, all or selected
Yes it does take a bit to get all images and see what needs to be imported - I use 32 GB cards - and the other issue is that if you delete impoprted photos next time you use the card the deleted ones will be in the new list so you have to select the rest and import selected - I've found no solution to this
LN

How to create a pdf form allowing Reader user to insert picture - NOT from their local hard drive - but from photos I want them to choose from?

Is there a way to create a PDF form where a Reader user can insert an image - that's NOT on their local hard drive?
I have 4 photos available - the users of my form will choose one of them and insert it in the pdf form. The users will NOT have the photos saved on their local hard drives so ideally, they will see thumbnails or a preview of the available photos and then select and insert the photo they want to use.
Is this possible? If so, how do I go about this? Right now, all I can find are ways to insert a photo located on the users local hard drive.
Hopefully someone can answer my question.

George, I'm not sure where the photos would go or how to include them. I'm a complete newbie when it comes to making pdf forms so i'm not sure if it's even possible.
I'm planning to make a flier. I want the end user to be able to choose the photo displayed on the flier - the photos would be ones that I choose and supply. I know I could just make four different fliers, but I thought it would be more efficient if I had one flier and gave the Reader user the ability to select the photo they like.
Does this sound possible to you?

[Forum FAQ] How to tell if the DAC port is automatically changed or not

Introduction
Per Books Online:
http://msdn.microsoft.com/en-us/library/ms189595.aspx
SQL Server listens for the DAC on TCP port 1434 if available or a TCP port dynamically assigned upon Database Engine startup.
Also, we can go to the following registry to specify the DAC port number manually:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQLServer\SuperSocketNetLib\AdminConnection\Tcp
The error log contains the port number the DAC is listening on. Besides looking at the error log, how to find which port is used by DAC connection and how to tell if the DAC port is manually set by us or assigned automatically by SQL Server?
Solution
The following query can be used to check if there is an existing DAC connection and it also give us the port number used by dedicated admin connection.
SELECT name,local_tcp_port FROM sys.dm_exec_connections ec
join sys.endpoints e
on (ec.endpoint_id=e.endpoint_id)
WHERE e.name='Dedicated Admin Connection'
Here is the scenario to test if the DAC port is automatically changed or not.
There are two instances are running on one server. I specified the same DAC port number 5555 for the two SQL Server instances by modifying the registry
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQLServer\SuperSocketNetLib\AdminConnection\Tcp
Opened the DAC connection to instance 1. Executed the above query, it returns the result:
name
local_tcp_port
Dedicated Admin Connection 5555
Then, opened a DAC connection to instance 2. It throw out the following error message:
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Client unable to establish connection because an error was encountered during handshakes before login.
Common causes include client attempting to connect to an unsupported version of SQL Server, server too busy to accept new connections or a resource limitation (memory or maximum allowed connections) on the server..
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : TCP Provider: An established connection was aborted by the software in your host machine..
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Client unable to establish connection.
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Client unable to establish connection due to prelogin failure.
The above error message was thrown out because the DAC port number 5555 was not available for instance 2 which was occupying by instance 1. After restarting the SQL Server engine service of instance 2, if checking in the registry, you would see a new DAC port
number has been assigned to the second instance.
Then, the DAC connection to instance 2 succeed this time and executed the above query, it returned the same port number which is same as the one in the registry key and the port number was assigned automatically.
DAC port will not change even SQL Server service is restarted only if the TCP port is available.
More Information
http://msdn.microsoft.com/en-us/library/ms189595.aspx
Applies to
SQL Server 2012
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

I tested your script after
establishing a DAC connection from SSMS 2014. It worked as described. Thank you.
SELECT name,local_tcp_port FROM sys.dm_exec_connections ec
join sys.endpoints e
on (ec.endpoint_id=e.endpoint_id)
WHERE e.name='Dedicated Admin Connection'
name local_tcp_port
Dedicated Admin Connection 1434
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

ITunes will no longer download. It says it has not been correctly localized for this language, and to run the English version. How do I do that?

My iTunes will no longer download.
All of a sudden I get the message "This version of iTunes has not been correctly localized for this language. Please run the English version".
How do I fix this and run the English version again? .

Start by trying to repair iTunes from the programs and features control panel.
Otherwise, for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

How do I tell iTunes not to install on sync apps that I downloaded?

I upgraded my SSD on my Mac and I thought I'd download all my apps so they were backed up on my computer. However, now iTunes tries to install them all on my iPhone whenever I try to sync it. I don't have nearly enough space on my iPhone so I always get a bunch of "ghost" apps and an error message that my iPhone is out of space every time I sync. How do I tell iTunes not to attempt to install these on my iPhone on sync? The only options to choose from are "Install" and "Will Install".
Thanks.
I have OS X 10.9.3, iTunes 11.2.2 (3), and iOS 7.1.1.

The easiest way is to simply remove the previous apps from your account, then sync all your apps. You can remove unwanted apps via iTunes. If you want a step by step instructions go to: http://www.cnet.com/how-to/how-to-delete-unwanted-ios-apps-from-itunes/

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell wh

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell what I do and do not have?

Apple Menu --> About this Mac.
Mylenium

When I try to open itunes it says; This version of itunes has not been correctly localized for this language. Please use the English version. How do I fix this problem?

When I try to open itunes it says; This version of itunes has not been correctly localized for this language. Please use the English version. How do I fix this problem?

Hey KEBENNETT,
It sounds like you've restored Windows on your PC and iTunes is no longer opening and running normally.
I'd recommend using the instructions found at step 4 and 5 in this article to repair or remove/reinstall your iTunes installation:
Issues installing iTunes for Windows - Apple Support
All the best,
Jeremy

How to setup not start cf9 local server on PC startup of VISTA OS

how to setup not start cf9 local server on PC startup of VISTA OS...? How to startup it manualy later if I wanted to?

The same way you would for any other Windows service: use the Services app in your Control Panel.
Adam

How "not to set locale " in user's profile?

In the "Oracle Universal Content Management 11gR1 Differences between 11gR1 and 10gR3" document
http://www.oracle.com/technology/products/content-management/ucm/diffsbetween10gand11g.pdf
says:
"If locale is not set in a user’s profile, Content Server can pick that up from a HTTP header variable."
However, how do I "not to set locale " in user's profile? it appears as a dropdown list and there is no option to enter null.
Thanks

Hi there,
What you're changing is per-user but those options are set in the Utilities->System Properties applet
Here's how you change it:
Go to the System Properties applet:
UNIX: Start the System Properties utility by running the System_Properties script, which is located in the bin subdirectory of the Stellent Content Server installation directory.
Windows: From the Windows Start menu, select Programs -> Content Server Content Server -> [Instance Name] -> Utilities -> System Properties.
Then once the System Properties applet is started:
# Open the Localization tab.
# In the list of locales, you can Disable the locales you have here or maybe a new option with 11g will show up.
# When you are done, click OK to apply the setting and exit System Properties.
# Restart each instance of the content server.
Cheers,
malky

How to tell Mutt NOT to encrypt locally saved mails?

Similar Messages

Maybe you are looking for