[JS][CS3] Modifying a template (ait) instance

Hi,
With document.height and .width being read-only properties, are we able to create a doc instance from a template and then alter its dimensions?
The reason I want to alter dimensions is that there are bunch of ad dimensions that a user has to adhere to. I imagine the .ait file to be a storage place for all constant objects, such as logo, formatted text, etc. So instead of copying/pasting those objects between the source and target docs, I thought I'd rather modify the doc instance via script.

You need to upload main.dropdown.js to the remote js folder

Similar Messages

Unable to upload the updated/modified Report template (rtf file) in siebel

Hi,
I am unable to upload the updated/modified Report template (rtf file) if already exists in the local database.
Initially I have uploaded a rtf template, generated xliff, registered it and can view the report from the registered view. Later I have made few changes to the rtf template, in the reports template view, I have uploaded this. When i run the report in the registered view, I am able to see the earlier version and it doesnt show me the updated changes.
I am using 8.1.1.3 siebel and BIP 10.1.3.3.1 on local.
Looking at the metalink found "How To Upload Modified RTF Template Files In The Siebel Application For BI Publisher Reporting [ID 1136418.1]" which is related to server but I am working on local database
Please find attached the template, xml file. can you please look into this and update me ASAP
Thanks,
RV

Hi,
Not able to find Report - Standard templates or Report - Custom templates view in Administration - BIP reports in Siebel 8.1.1.3?
We have applied 8.1.1.3 patch on 8.1.1.0
below are the steps followed
Reports are not generated after 8.1.1.3 patch installtion.
we have also followed to below steps mentioned for this issue in oracle support.
"In order to resolve this behavior it is necessary to ensure that the 8.1.1.3 FixPack has been applied to the Siebel Tools installation. This will provide an additional .zip file in the REPPATCH folder of the Siebel Tools installation. Once this has been done please then follow the configuration steps as documented :
change sysprefix to X_ before sif import and chage back to SBL_ after sif import.
1) Import the sif files from Siebel\8.1\Tools_1\REPPATCH\12-1VMBCSV.zip
2) Import the 4 SIF files in the following order:
S_XMLP_REP_TMPL_02112010.sif
SBL_XMLP_REPORT_SELECTION_FLG.sif
Report Template BC.sif
Report Template Registration Applet.sif
3)Apply the DDL for table S_XMLP_REP_TMPL and compile repository
Once the above steps have been completed the Selected Record flag will appear in the Report Template Registration views."
we still not able to generated able to generate reports even after following above steps.
Thanks
Sean

How do I modify the template used in the Photo Gallery module

I notice the Photo Galleries are rendered as an HTML table and I would like to make a small modification to the way the gallery is rendered on the page.
Basically I just want to wrap a DIV around the <img> tag so I can control the look of the image via my own CSS.
I see there is the ability to modify Module Templates, but the photo gallery module is not listed there.
Where can I access the template used for a photo gallery?
Alternatively I will need to display the images myself using an XML feed and jQuery, but I would rather use BC's own modules when I can.

Hi David,
There is no template for the photo Galleries. But if you are using Firebug you can find out the css values and add your own modification by adding CSS by the same selector as the current gallery to your own page and use the !Important value to over write the gallery css.

Dreamweaver CS3 reforderss ColdFusion templates

Dreamweaver CS3 reorders ColdFusion template code without
being asked
When opening a Dreamweaver 8 ColdFusion page, Dreamweaver CS3
will reorder some ColdFusion tags.
For example:
1. <cfswitch expression="#response.errorcode#">
2. <cfcase value = "10602">
3. "..Some Code..."
4. </cfcase>
5. <cfdefaultcase>
6. "...Some_Other_Code.."
7. </cfdefaultcase>
8. </cfswitch>
9. <CFQUERY username="#request.dbuser#"
password="#request.dbpass#" DATASOURCE="#attributes.DSN#">
10. Blah blah
11 .</cfquery>
Saved as a Dreamweaver 8 page and then subsequently opened in
Dreamweaver CS3, the code becomes jumbled as:
1. <cfswitch expression="#response.errorcode#">
2. <cfcase value = "10602">
3. "...Some_Code.."
4.
5. </cfcase><cfdefaultcase>
6. "...Some_Other_Code.."
7. </cfswitch>
8. </cfdefaultcase><CFQUERY
username="#request.dbuser#" password="#request.dbpass#"
DATASOURCE="#attributes.DSN#">
9. ..blah..blah..
10. </CFQUERY>
(Note the juxtaposition of the </cfdefaultcase> and
</cfswitch> tags on lines 7 & 8)
The Command "Clean up XHTML" has no effect.
This behavior occurs on every Mac running DWCS3 in our
office, but doesn't occur on Macs running DW8.
If the CF page is opened in a Text Editor and saved as a Text
doc and then opened in DWCS3 as a Text doc, the code stays intact
and is not scrambled.
However, as soon as the page is saved with the ".cfm"
extension, DWCS3 scrambles the </cfdefaultcase> and
</cfswitch> tags.
Adobe Dreamweaver Support has duplicated the error but has no
fix as of yet, so Dreamweaver CS3 is completely useless to me as a
CF editor.
Does anyone have any ideas?

Dreamweaver CS3 reorders ColdFusion template code without
being asked
When opening a Dreamweaver 8 ColdFusion page, Dreamweaver CS3
will reorder some ColdFusion tags.
For example:
1. <cfswitch expression="#response.errorcode#">
2. <cfcase value = "10602">
3. "..Some Code..."
4. </cfcase>
5. <cfdefaultcase>
6. "...Some_Other_Code.."
7. </cfdefaultcase>
8. </cfswitch>
9. <CFQUERY username="#request.dbuser#"
password="#request.dbpass#" DATASOURCE="#attributes.DSN#">
10. Blah blah
11 .</cfquery>
Saved as a Dreamweaver 8 page and then subsequently opened in
Dreamweaver CS3, the code becomes jumbled as:
1. <cfswitch expression="#response.errorcode#">
2. <cfcase value = "10602">
3. "...Some_Code.."
4.
5. </cfcase><cfdefaultcase>
6. "...Some_Other_Code.."
7. </cfswitch>
8. </cfdefaultcase><CFQUERY
username="#request.dbuser#" password="#request.dbpass#"
DATASOURCE="#attributes.DSN#">
9. ..blah..blah..
10. </CFQUERY>
(Note the juxtaposition of the </cfdefaultcase> and
</cfswitch> tags on lines 7 & 8)
The Command "Clean up XHTML" has no effect.
This behavior occurs on every Mac running DWCS3 in our
office, but doesn't occur on Macs running DW8.
If the CF page is opened in a Text Editor and saved as a Text
doc and then opened in DWCS3 as a Text doc, the code stays intact
and is not scrambled.
However, as soon as the page is saved with the ".cfm"
extension, DWCS3 scrambles the </cfdefaultcase> and
</cfswitch> tags.
Adobe Dreamweaver Support has duplicated the error but has no
fix as of yet, so Dreamweaver CS3 is completely useless to me as a
CF editor.
Does anyone have any ideas?

Dreamweaver CS3 reformats ColdFusion templates

Dreamweaver CS3 reorders ColdFusion template code without
being asked
When opening a Dreamweaver 8 ColdFusion page, Dreamweaver CS3
will reorder some ColdFusion tags.
For example:
1. <cfswitch expression="#response.errorcode#">
2. <cfcase value = "10602">
3. "..Some Code..."
4. </cfcase>
5. <cfdefaultcase>
6. "...Some_Other_Code.."
7. </cfdefaultcase>
8. </cfswitch>
9. <CFQUERY username="#request.dbuser#"
password="#request.dbpass#" DATASOURCE="#attributes.DSN#">
10. Blah blah
11 .</cfquery>
Saved as a Dreamweaver 8 page and then subsequently opened in
Dreamweaver CS3 becomes jumbled as:
1. <cfswitch expression="#response.errorcode#">
2. <cfcase value = "10602">
3. "...Some_Code.."
4.
5. </cfcase><cfdefaultcase>
6. "...Some_Other_Code.."
7. </cfswitch>
8. </cfdefaultcase><CFQUERY
username="#request.dbuser#" password="#request.dbpass#"
DATASOURCE="#attributes.DSN#">
9. ..blah..blah..
10. </CFQUERY>
(Note the juxtaposition of the </cfdefaultcase> and
</cfswitch> tags on lines 7 & 8)
The Command "Clean up XHTML" has no effect.
This behavior occurs on every Mac running DWCS3 in our
office, but doesn't occur on Macs running DW8.
If the CF page is opened in a Text Editor and saved as a Text
doc and then opened in DWCS3 as a Text doc, the code stays intact
and is not scrambled.
However, as soon as the page is saved with the ".cfm"
extension, DWCS3 scrambles the </cfdefaultcase> and
</cfswitch> tags.
Adobe Dreamweaver Support has duplicated the error but has no
fix as of yet, so Dreamweaver CS3 is completely useless to me as a
CF editor.
Does anyone have any ideas?

Dreamweaver CS3 reorders ColdFusion template code without
being asked
When opening a Dreamweaver 8 ColdFusion page, Dreamweaver CS3
will reorder some ColdFusion tags.
For example:
1. <cfswitch expression="#response.errorcode#">
2. <cfcase value = "10602">
3. "..Some Code..."
4. </cfcase>
5. <cfdefaultcase>
6. "...Some_Other_Code.."
7. </cfdefaultcase>
8. </cfswitch>
9. <CFQUERY username="#request.dbuser#"
password="#request.dbpass#" DATASOURCE="#attributes.DSN#">
10. Blah blah
11 .</cfquery>
Saved as a Dreamweaver 8 page and then subsequently opened in
Dreamweaver CS3 becomes jumbled as:
1. <cfswitch expression="#response.errorcode#">
2. <cfcase value = "10602">
3. "...Some_Code.."
4.
5. </cfcase><cfdefaultcase>
6. "...Some_Other_Code.."
7. </cfswitch>
8. </cfdefaultcase><CFQUERY
username="#request.dbuser#" password="#request.dbpass#"
DATASOURCE="#attributes.DSN#">
9. ..blah..blah..
10. </CFQUERY>
(Note the juxtaposition of the </cfdefaultcase> and
</cfswitch> tags on lines 7 & 8)
The Command "Clean up XHTML" has no effect.
This behavior occurs on every Mac running DWCS3 in our
office, but doesn't occur on Macs running DW8.
If the CF page is opened in a Text Editor and saved as a Text
doc and then opened in DWCS3 as a Text doc, the code stays intact
and is not scrambled.
However, as soon as the page is saved with the ".cfm"
extension, DWCS3 scrambles the </cfdefaultcase> and
</cfswitch> tags.
Adobe Dreamweaver Support has duplicated the error but has no
fix as of yet, so Dreamweaver CS3 is completely useless to me as a
CF editor.
Does anyone have any ideas?

How to modify Data Template ARXSGPO.xml

We are on EBS 12.1.1. My client want to customize AR Customer Balance Statement Letter. They need rtf to be modified as well as some additional info for which I need to modify Data Template ARXSGPO.xml .
But I am not able to modify above xml file. Update File button has been disabled. Could someone tell me how I can update existing xml file ?
Thanks in Advance

Hi
You could use the XDOLoader command to upload data templates.
http://bipublisher.blogspot.com/2008/01/bi-publisher-xdo-loader.html
But it would be better if you could create a custom report and attach the new date template, instead of modifying the standard report.
Regards
Nishka

Modifying a template

I have a project with 200 forms more or less. Now I need to modify a template, and I know I would open all the fmbs and save them. How can I optimize this process ? I use Project Builder and think that It can help me with a Macro, but not sure.
Any suggestions?
Thanks,
JMM

export it and remap the speed of the clip in FCP or Motion. Or(the painful way) select the group with the camera and bring up your keyframe editor panel, extend the duration of your project, go to the point where the camera is focusing on the dropzone, select all the keyframes after that and pull them (holding the shift key) to your left, thus extending the time it takes for the camera to move on.... you would then have to extend the duration or the effects, behaviors, keyframes of your other elements....
my recommendation: export and retime.

Excel busy when I try to modify a template of MS Project visual report

(Sometime) when I try to modify a xlst template for MS Project (2013) visual report MS Project say me that excel is busy.
But Excel is closed. I try to close and re-open bot excel and MSProject but say me always that cannot open visual report (based on my custom template) because excel is busy.
In my template I inserted also an external connection to other data (coming from another database).
The template is populate with "visualize report" ....
Also If I try to modify the template (using MS PRoject function) MS Project say me that MS Excel is busy...
I used that template sussefully... but when I make some update to template file (for example add a table o a simple text) then MS Project is not able to open excel file.... but I don't understand why. So I have to rollback modifies and take previous template
version.
[Note:] could be something related to which sheet (of template xlst file) has focus on when saved?
thank you.
regards
db
Daniele.b75

could depend by what I choose when close & save the template?
Excel ask me...
Sometimes I try to click on SI .... or NO ... but always MS Project says me that Excel is busy.
please.... help
thank you
Daniele.b75

Modifying Pages templates?

Have used the "club" newsletter template for a newsletter and now want to modify it to include a logo at the top of the pageCan't figure out how to move the dateline header at the top down to make room for logo. Apple help didn't have any answer and referred me here. This should be easy and straightforward but it isn't.
Anyone know how to the modify this template to move objects, including dateline, down on page?
Simple delete of that line of text also removed it from all other pages. Cannot highlight box containing dateline info so can't copy, paste and rebuilt page in new document.

It's always a good idea to show the layout on Pages documents, makes it easier to see what is where.
The date is in a header & the object, the UK flag, is a object placeholder. You can drag & drop your logo onto the flag &, because it is an inline object, it will automatically enlarge the header. Since it's a page layout document, the problem you're having is that the title & everything else is text boxes or floating object as there is no text layer. You just need to select the text boxes & objects & move them around to make room.

Help require to migrate Report Manager(FSG)Excel Templates across Instances

In R12.1.3, we are creating new custom MS Excel templates for Standard FSG Reports.
We understand to create these templates with Report Manager using “Financial Report Template Editor”, edit them, download and upload back.
These templates created in Test Instance needs to be moved to multiple instances.
How can we migrate these custom Excel templates from one instance to another? , as when we select Oracle-->Upload from Excel template, it expects to upload back to the same instance where from it was downloaded originally, but our requirement is to migrate these templates across instances rather than to recreate it on each instance
Please suggest how to migrate these Excel templates from one instance to another.
Thanks,
Amit

hi,
sorry, but currently there is no such option, the templates need to be rebuilt.
Enhancement Request
Bug 6710387 'COPY REPORT TEMPLATES FROM ONE INSTANCE TO AN OTHER'
was raised on the issue but it was not implemented yet.
Please monitor this enhancement on 'My Oracle Support' to get news on its implementation.
For further information on Report Manager, please check theses notes:
(Doc ID 726774.1) - Report Manager - Master Note
(Doc ID 726958.1) - Report Manager (FRM) List of Patches
(Doc ID 858505.1) - Report Manager Troubleshooting
kind regards, Martin

Dreamweaver CS3 bug with templates?

Hello,
I am having a very major problem with a template. I am on
Dreamweaver CS3 and my template has been created in Dreamweaver 8
and it says in parenthesis (xhtml) - even though all my pages from
the template are html.
When I now make even the most minor change (even adding one
single letter) to my template or when I try to create a new page
from that template, the resulting pages have missing images (my
whole top banner), but the actual template looks perfect. You can
actually seean example of a page on a test website at
http://ww2.itrak.com/iTRAKnouveau/
I seem to remember I actually had this problem once before
and I did not have it in Dreamweaver 8 but I am not sure of my
recollection.
Unfortunately, this time I cannot access Dreamweaver 8
anymore... I am really hoping someone can solve this one with me!!
Christine

nope
Jo
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> Sounds like it's not a DW problem after all....
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "josie1one" <[email protected]> wrote in
message
> news:[email protected]...
>> There's this:
>>
>> body {
>> background-color: #d3d5d6;
>> margin-top: 0px;
>> background-image: url(); <----------- no image
defined
>> background-repeat: repeat-x;
>>
>> and
>>
http://ww2.itrak.com/iTRAKnouveau/images/header_print.jpg
>>
http://ww2.itrak.com/iTRAKnouveau/images/header_itrack_4_01.jpg
through
>> to 4_24 don't appear to be on the server - Not
Found. Can you check your
>> site definition?
>>
>> --
>> Jo
>>
>>
>>
>>
>> "Strateege Health"
<[email protected]> wrote in message
>> news:[email protected]...
>>> Hello,
>>> I am having a very major problem with a
template. I am on Dreamweaver
>>> CS3 and
>>> my template has been created in Dreamweaver 8
and it says in parenthesis
>>> (xhtml) - even though all my pages from the
template are html.
>>> When I now make even the most minor change (even
adding one single
>>> letter) to
>>> my template or when I try to create a new page
from that template, the
>>> resulting pages have missing images (my whole
top banner), but the
>>> actual
>>> template looks perfect. You can actually seean
example of a page on a
>>> test
>>> website at
http://ww2.itrak.com/iTRAKnouveau/
>>> I seem to remember I actually had this problem
once before and I did not
>>> have
>>> it in Dreamweaver 8 but I am not sure of my
recollection.
>>> Unfortunately, this time I cannot access
Dreamweaver 8 anymore... I am
>>> really
>>> hoping someone can solve this one with me!!
>>> Christine
>>>
>>
>>
>

Modify response template workflow_info.htm

Hi - I'm wanting to modify response template workflow_info.htm to display full names of reviewers in the template. I already know that the getValueForSpecifiedUser function will do that for me and I have some experience with custom components, but I'm not quite sure how to go about this particular change since the template is called from the GET_WORKFLOW_INFO_BYNAME service.
The questions I have are as follows:
What type of resource definition do I create?
Do I use a super tag to override the existing output? I'm leaning to the belief that I override the service itself rather than the output of the response template, but could use a pointer here.
Appreciate any advice anyone can provide.
Many thanks,
Jon

That helps a bunch. What I'm dealing with is that we need to display the full first and last name of the approvers in the workflow action history section as follows:
          
          <td class="<$rowClass$>">
               <div class="xuiListCellDivCenter" nowrap>
                    <script language="JavaScript">
                         var userString = "<$js(wfUsers)$>";
                         var userArray = userString.split(",");
                         for (var i=0; i<userArray.length; i++) { document.write(userArray[i] + "<br>") }
                    </script>
               </div></td>
So I would change the output to display their last and first name rather than their account name, which is what is currently showing up. That is the goal.
In the past, I've done components where I had used the @dynamichtml to key off the named fragment, so this became a problem when I was trying to use the response template for the Workflow service which didn't have any of these and I was left to try to make sense of how to do a component for this... I think I'm getting what you are saying to do and will give it a go. I'll post my success/fails here to go through it with you guys...
Many thanks
Edited by: Jon Almada on Feb 5, 2013 1:38 PM

Problem modifying a template room

Hi experts,
When i modify a template room, such us, the Assignment Rules only appear this change in the news rooms; the old rooms hasn´t the change...
Is this normal? Can i update the old rooms with the new Assignment Rules?
Thanks in advance,
Regards,

Hello Victor,
This is correct behaviour, any changes you make to a room template will only take effect for newly created rooms using this template. Old rooms which were previously created with this template will not be changed.
Regards,
Lorcan.

I'm using Word for Mac. Though there are various instructions on the Internet for modifying the templates, none make sense to me. They instruct to do something I can't follow. I change a template but can't save it to the template folder.

What the ****.
OK, I try to change a template using Word for Mac version 14.3.4 2011 edition.
I make a change to the template but am unable to save the darned thing to the template folder; it asks for a file name like it's a new document. I want to change the blasted template but if I can't save it as a modified template, I've accomplished nothing.
Does anyone have a solution?
Thanks

Support for Microsoft Office for Mac

How to modify a template and use both old/new in the same library without interference

OK first Thank you for reading this and hopefully being able to help me out. I got dumped this project on my desk to update two different templates already published in
share point(2010) years ago. The original developer left the company 4 years ago. Since then anyone that tried to do anything with them made a big mess. I have done some heavy reading and am stuck on few issues.
Please note the templates were created IP 2007 and I will be using IP 2007 to modify them. The temples have a small amount of C# that does not have to be changed. There is also a digital signature linked to them.
After some heavy reading this week. I figured that I need to edit the template from Share point(2010)/IP(2007) and not copy the templates to a different location laptop/desktop
because that will ruin the digital signature. There is also a large volume of submitted forms from these temples. The new version of the temples will be heavily modified deleting rolls columns changing names. My understanding is that since I want to keep the
old submitted forms the way they are and still use the old template to open them. I would need a second version of the original template with all the visual modification to still use the original template's C# digital signatures and any other file that runs
in the background.
The plan:
1)Turn off the automatic update to forms/template when a new version of the template is created.
2) Copy the existing template (.xsn) file to a new document folder in share point(same network).
3) Change the name of the .XSN file that I copied and modify it??????????? Will keeping the same name interfere with the old template/C# digital signature ect? I would like to change to something like SameName_version_2015 for example. or will changing the
name cut the link to the old C# digital signature? or will it get modify the background files and break the old template/submitted files.
4) Publish the new template in share point.
5) Change the data connection to a new directory that I wish to submit all files.
Please advice am I missing anything? and help me understand my step 3 better. Also I would love to get a better understanding of how i can backup and recover everything. Do I simple copy unmodified .XSN files somewhere and publish them if things goes wrong?
Do I need to backup anything else?
I am open to options if I can create a test folder in the share point for safety.
Once again THANK YOU for trying to help.

Hi, thanks for the reply!
Just to follow up for what we did to disable the delete function for maintaining table records. We hided the Delete button by adding a "MODULE disable_delete" code in Screen Painter. So now only adding records to the table is allowed.
Thanks,
Jenny

[JS][CS3] Modifying a template (ait) instance

Similar Messages

Maybe you are looking for