How to tell what recovery point was used for restore

Is there a way to determine what recovery point was used for a restore after the restore was started.

The question comes from the experience of having a package installed but not being able to build it from the same PKGBUILD (due to nontrivial issues). The package must have been built successfully by *a* build system, so ideally one would want to replicate that build. The relevant differences I could think of are the compiler flags and to a lesser extent the hardware build platform.
You should describe these supposedly non-trivial issues. I've never experienced what you describe in my years using Arch, nor have I ever heard it suggested that the famously vanilla Arch packages are built using some sort of unconventional compiler flags. I have heard multiple developers say using highly modified CPU optimizations and modified linking and such are mostly pointless, however. So I'd bet a week's pay that the build system uses vanilla GCC with the default settings. Why would the thing that actually builds Arch Linux be the one part of the Arch ecosystem that doesn't abide by the Arch standards? Why would only some packages have library linking problems and such when all packages are built on the same machine against the same library versions---and thus the conditions resulting in a failed build would be identical to those in a successful build? I could be wrong, but I think you're on the wrong track. The quickest way to find out is to describe what the real problem is, not what you imagine the solution to be.

Similar Messages

How to tell what codec has been used??

Hi
Just wondering how to tell what codec a particular video clip has been encoded in? I cannot see it anywhere in bridge. after fx dos it for some but not all clips.
cheers
angus

if you're using Loader to load the swfs, you could examine e.contentLoaderInfo.url to see which swf it is

How to know what compression format is used for images in pdf file? (jpeg2000 issue with iPad)

I have a pdf file whose images are compressed in jpeg2000 format which the iPad doesn't support. I used Acrobat to save the pdf file using the zip compression for the images and another time using the jpg compression. I set this in the PDF Optimizer screen. The images in the pdf do not show up in the iPad.
I am not sure if I am doing something wrong. How do I know what compression was used for the images in a pdf file?

My work around for now is "Make Compatible with…’ from Acrobat 4.0 " which does not support JPEG2000 compression.
http://forums.adobe.com/message/3847176#3847176

How to tell what methods where not used in the code?

Hi there,
I wonder if there's a way to check what method are not used in the execution code (void main).
Example:
in the code below, the following method where not used:
setAge, getAge, getName,setName, addFeedback
public class Test
     public static void main(String args[])
          Employee empl = new Employee("John", 54);
          System.out.println(empl.getDeatils());
public class Employee
     private int age;
     private String name;
     public Employee(String name, int age)
          this.name=name;
          this.age=age;
     public String getDeatils()
          return name+" ("+age+")";
     public void addFeedback()
          //do something here.
     public int getAge()
          return age;
     public void setAge(int age)
          this.age = age;
     public String getName()
          return name;
     public void setName(String name)
          this.name = name;
}

Yucca wrote:
georgemc wrote:
Yucca wrote:
Sound like you should visit the logging API or you could do SOP all over your code which would make it very unreadableI don't see why logging code will make his code any less messy than SOP everywhere. Unless you're talking about applying logging by AOP, which is equally messy in a different way.I never implied that the one was tidier than the other. O merely recommended my knowledge on how to help the OP and gave 2 choices. Oh right. It looked like you were suggesting SOP was messier somehow. Never mind, then.
Besides is AOP really that bad when using Interceptors? I know that this is new to Java but interceptors are really not that untidy.I didn't say they were untidy. I didn't say there was anything wrong with AOP. But logging by AOP results in pretty useless, messy logs. "This method was called with these parameters" all over the place, rather than something nice and friendly. Remember, logging is more often read by support staff than developers, so while it might be obvious to you what "getLlama(200, 3)" means, it's probably garbage to the support bods.

HT1311 How can I find out, what Apple ID was used for an App I recently purchased?

I have several Apple IDs and used one of these to purchase Apple Pages. Now I'd like to use the same Apple ID to complete another purchase but just can't figure out what Apple ID I used last time...

The apps in the Apps section of your computer's iTunes library will show all of the apps that you downloaded on it and/or copied form your devices. But if I select one of the apps in the Apps section (in my library in iTunes, not Finder) in there and do get-info, then on the bottom half of the Summary tab on the popup that you I get I see :
With the 'Apple ID' field showing the account id that I downloaded it with

How to tell which Connection Key was used?

Is there a way from within Contribute to identify the key
that a user's connection was created with?
I sent three Connection keys with separate ftp
usernames/passwords to three separate users. Now one user is having
problems uploading images to the web site using Contribute and I
want to identify which connection key they are using so that I can
troubleshoot the problem based on the ftp username/password that is
associated with that Connection key. They can't remember if they
used another user's key.

When a key doesn't work as expected I just send another one
and tell the user to delete it after the connection is
established.

How to tell what other program is using webcam?

Hello,
My in-laws sometimes (maybe 20% of the time) get a message that says that the webcam is already in use by another program when they try to video chat with us. The message is in Danish and says something like "Webcamaret bruges af et andet program". They haven't started any other program. iChat shows a green camera icon on both their buddy list and on our remote system's buddy list.
Restarting or stopping iChat and disconnecting/reconnecting their webcam always seems to fix the problem, but I'd like to understand how to fix once and for all. Restarting is time consuming and rather disruptive for them and reseating the webcam is difficult for them physically to do.
They have a Mac Mini Intel 1.66 Core Duo. I recently switched out their firewire-based iSight with a USB-based Logitech Quickcam Vision Pro for Mac. They had the same problem with both, but they don't have the iSight any longer to try it again.
They are half-way across the world, and not tech-savvy, so resetting the PMU won't be possible.
I've looked through their Console logs, but don't even see any error message when it occurs.
Thanks in advance for any suggestions.
David

Hi,
Have them check in System Preferences > Accounts > (The Logged in account) > Login Items.
This is a list of the apps and utilities that start up when the Mac does.
(iTunes Helper is a common one that most people have).
This is one common cause of another app having access the the camera.
Look for iMovie, Photo Booth, Any System or iChat Add-On relating to Camera and camera tweaks, Any Software for the Logitech (It should not need to be started up at computer Launch)
Comic Book if bundled with their Mac.
Also check this list EZ Jim's Work
I would also get them to Check the System Profiler and then use the reveal Triangles to see Hardware > USB
If you have another way to login in to their computer other than iChat Screen Sharing then you could run this in Terminal
/Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7
With iChat Shut down:-
Copy and Paste the Bold Text into Terminal and then hit the Enter key.
This will start iChat and Create Log in Terminal.
When the Buddy List has finished Loading Quit iChat in the Normal Way.
Copy the whole Log up to that point and paste it into TextEdit and send it to your self.
If you read through it, it should list two Cameras:-
1) the External (Or any Internal iSight for other reading this)
2) A software one ready for iChat Screen Sharing.
If the Regular one lists a Count less than 0 (zero) then iChat is having a job reading the Hardware state.
If this is the case then you could try deleting com.apple.iChat.plist from their Home Folder/Library/Preferences (Just drag it to the Trash)
iChat will need to be restarted where it will rewrite that .plist after checking the System again.
NOTE:-
This does lose all the other settings they have changed from Defaults in the iChat Preferences except the Accounts pane. (Saved Transcripts, Font choices, IM colours etc)
Are they using their Web Browser to Chat on Flash Based or the Google Mail Web Chat page ?
If that Tab or Window is still open (if they are still in a "Room") the camera will be "held" by the web Browser.
If they do use this method and it is Flash check they have not ticked the "Remember" button to Allow access each time they use that Chat site (I am not sure if the Google Chat Plug-in has a similar "Allow" Pop Up).
FaceTime for the Mac (The Beta) can in fact use the camera at the same time as iChat. It does not seem to matter which application is launched first.
Resetting the SMC on the Mac Mini is not invasive
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Press and hold the power button for 5 seconds.
4. Release the power button.
5. Attach the computers power cable.
6. Press the power button to turn on the computer.
See the third Expandable link in this Article (Near the bottom)
In most cases it can be just that the System has flagged somewhere that it thinks the camera is in use when in fact nothing is.
A PRAM reset may sort it but the SMC reset is more certain.
A PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD (or ⌘)+ALT PR Keys until you have heard three Start Up Bongs.
Hope this helps.
8:40 PM Wednesday; January 26, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

What execution plan was used?

Hi there
How can I find out what execution plan was used for an SQL when it was executed as part of the batch-process at night? 10gR2 on ASM, RHEL 5.8 64bit.
Best regards

Are you using the enterprise edition? Are you licensed to use the AWR? If so, assuming that the query ran long enough to be captured in an AWR snapshot (which seems likely if you're asking this question), DBA_HIST_SQL_PLAN will have the plan information and DBA_HIST_SQLSTAT will tell you the plan_hash_value (or values) that were used for a particular SQL_ID in a particular SNAP_ID. DBA_HIST_SNAPSHOT will tell you what SNAP_ID (or set of snap_id's) corresponds to whatever time period you are interested in.
Justin

I have unknown charges on my account. How can I tell what I am being charged for?

I would like to know how to tell what I am being charged for. I have two .99 charges on my bank account and I am unsure as to what they are for. One in particular is from today and I have not purchased anything. I did do some app updates. Am I being charged for updating a purchased app?
I would like to know how to get the specific information of purchases that are appearing on my bank statement. I have tried searching for the reference number from my statement but did not find anything.
Thank you!

It could be:
iTunes Store & Mac App Store: About credit-card authorization holds
You could contact itunes support and ask. Click Support at the top if this page, then click the link under Contact Us

HT1338 Can anyone tell me how to find what OS I'm using on the Mac? Tiger or Leopard? Also, how do I update from 10.6.8 to the latest version?

Can anyone tell me how to find what OS I'm using on the Mac?
Tiger or Leopard?
Also, how do I update from 10.6.8 to the latest version?

Go to the Apple menu and select "About This Mac". You will get a window similar to this one -
You current OS X version number will be shown as I've marked.
OS X 10.4.x is Tiger, 10.5.x is Leopard, 10.6.x is Snow Leopard, 10.7.x is Lion, and 10.8.x is Mountain Lion.
Whether or not you can go to the latest OS X version depends upon your hardware -
You will need to purchase the retail set for the OS X version you want; there is no pint in getting and installing any intermediate versions. Once the retail version has been installed, you can update it to the latest release for that version via download updater.

How to tell N6.5 DHCP to use a W2k8 for PXE?

Hello,
could anyone give me a hint, how to tell my netware DHCP to use a Windows Server 2008 R2 running Acronis with PXE Server?
Actual Situation:
Netware 6.5 Sp8 Server with ZENWORKS in Cluster mode
Netware DHCP Server
ZEN7 SP1 Imaging
--> works fine so far, and no problem in other subnets, IP-helper are configured in the switches
New Situation:
Netware 6.5 Sp8 Server with ZENWORKS in Cluster mode
Netware DHCP Server
Windows Server 2008 R2 running Acronis Snap Deploy with PXE-Server - in future may be a clean Windows Deployment service without Acronis
--> that would be nice :)
I found serveral ini-files (dts.ini, pdhcp.ini, tftp.ini) where I configured the new IP-Address of the W2k8 PXE Server.
Now:
The Client gets its correct IP-Address from Netware DHCP
but after that the following messages:
Auto-select:
ZENworks Boot
Boot Server IP: --.--.--.-- (the correct one configured in the ini-files!)
TFTP.
PXE-T02:
PXE-E3C: TFTP Error - Access Violation
PXE-M0F: Exiting Intel Boot Agent
Any ideas?
Thanks a lot.

Originally Posted by magic31
You don't have to configure anything specifically in DHCP to work with PXE. Possibly just unconfigure an option that was set for the previos setup; One thing to check (and remove) is option 60 for the PXE Client option, if this is configured with the DHCP subnet options. This option should only be set if both DHCP and PXE services are on the same server (as is probably the case in your situation as I'm guessing both DHCP as also PXE get loaded in the same cluster resource script).
For subnets serviced outside of the subnet your DHCP server is running in, you will need to configure multiple ip helpers: one that points to the DHCP server and one points to the PXE server so those requests on other subnets get serviced correctly.
To get things running it's probably easier to try to get this to work on the subnet your DHCP and PXE server are running in (so you are not also having to deal with the ip helper setup just yet). If that works, then expand you configuration to different subnets & ip helpers.
Hope that helps,
Willem
As a ps and for clarification, don't load the PDHCP on any of the NetWare servers... just have the PXE PDHCP service running on the Windows server.
The PDHCP/PXE service for ZenWorks won't understand/work with the Arconis one and visa versa.
-Willem

How to tell what template is applied to a Framemaker file?

I'm new to Framemaker...so please excuse if this is a silly question.
We are trying to figure out how to tell what template has been applied to a Framemaker file. We are using the structured view in Framemaker 7.2.
Perhaps I am thinking too much like a Microsoft Word user -- in which case I can look at what template has been applied to a document.
Does Framemaker work the same way -- or are templates associated with Framemaker files in some other way?
Thank you --
J-Ha

J-Ha,
FrameMaker works differently. Strictly speaking, there is no way to tell which template was used last. A FrameMaker template is just a FrameMaker document which you call "template". Using File > Import > Formats you can import all or selected formats from one document to another. The main benefit: Each document is completely self-contained and does not require any other document.
Many solutions I know of include a user variable named something like "template-version" into their template document or put the version information on one of the reference pages. When importing user variables or reference pages, this can tell you version imported last.
- Michael

Does anyone know what software was used for Mac Welcome Video?

As you may remember when you turned your mac on for the first time, a ver neat welcome video played with upbeat music. Well I just wanted to know if anybody knew what program(s) was used to make it. If you know or have any idea please tell me. Thanks!

Hi and welcome to discussions. I tried to find something about it, but was not successful. I would guess though that this has been made using some of Apple's own software, everything else would not really make sense. And there actually is one tool in the portfolio capable of creating something like that: Motion. So, as an educated guess, I would say that's the one.

How to tell what packages have recently run

Occasionally, after start up, I'll see something that looks like a package that quickly runs. I have no idea where to look for information to figure out what ran. I've ran searches trying to find out how to tell what packages have recently run but have not found anything useful. If anyone knows or has any ideas on what I can do to figure that out, I'd love the help.

You are welcome. Based on my experiences, the only time I look at Console is when something is not working. You could get overly engrossed trying to figure out what everything means.

Icloud has has exclamation but I don't know how to tell what the error is? I recently selected bookmarks for syncing.

icloud has has exclamation but I don't know how to tell what the error is? I recently selected bookmarks for syncing.

TM will show it has done a backup.. Look at the info.. when was the backup completed??
If you want more details install the widget.
A1 here.
http://pondini.org/TM/Troubleshooting.html
The time capsule though blinks amber and the Airport Utility shows blinking amber light and has a red circle with the number 1 in it.
There is an error.. probably trivial.. firmware update, default password..
Open the airport utility and find out what the error is.
Simply click the TC and see status in the summary page.. it will list all the errors and what you should do.. fix or ignore them. ie this TC has an error.. default password.. I chose to ignore.. when I "fix" the problem the LED goes green.
Here is additional TC.. it is blinking amber with faults.
Click the fault. eg default password.
You can ignore or edit .. if you click edit it will take you to the full setup where you can change the settings.
I ignored my errors and now it is green..

How to tell what recovery point was used for restore

Similar Messages

Maybe you are looking for