How to telnet to one of the switches in a 3725 stack?

Hi,
I have this stack of 3 x 3725 switches. When I set up the stack, I configure the master switch to have a certain IP address. I can telnet to this IP address no problem.
However, what should I do if I want to telnet to the other slave switches?
Can I do something like "telnet x.x.x.x:2"?
Thanks in advance.

Hi Blue,
You can access all or specific stack members by using the "remote command {all | stack-member-number}" privileged EXEC command. The stack member number range is 1 to 9.
You can access specific stack members by using the "session stack-member-number" privileged EXEC command. The stack member number range is 1 to 9. The stack member number is appended to the system prompt. For example, Switch-2# is the prompt in privileged EXEC mode for stack member 2, and the system prompt for the stack master is Switch. Enter exit to return to the CLI session on the stack master. Only the show and debug commands are available in a CLI session to a specific stack member.
This link may help you with some information to manage stack
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12220se/3750scg/swstack.htm#wp1044402
HTH, if yes please rate the post.
Ankur

Similar Messages

  • I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

    I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

    Are you in the US? Order one from here:  http://store.apple.com/us/browse/home/shop_mac/mac_accessories/power?mco=MTM3NjU xNDg
    Or check out Best Buy.

  • How do I delete one of the user accounts on my computer and not lose the data in that account?

    How do I delete one of the user accounts on my computer and not lose the data in that account?

    I actually have the opposite of this problem. haha.
    https://discussions.apple.com/thread/4484354

  • HT1657 I couldn't play movie rental and accidentally rented it twice. How can I remove one of the charges?

    I just bought and used my apple tv. I tried renting a movie but was asked to go to my itunes to verify my info. In the  process, I ended up renting the movie 2x and had to accept to be able to get the PLAY button to pop up on the screen. I watched to movie but do not want to be charged 2x for rental.
    How can I remove one of the charges?

    You can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I assume these are POP accounts and all computers are set to remove from Server after downloading.
    So on the non dominant ones... Mail Preferences>Accounts, highlight an account, Advanced tab, uncheck remove from Server, just have the main dominant one remove from server.
    Or get/setup IMAP accounts.

  • I have an apple ID for the South African iTunes store how do I get one for the US store?, I have an apple ID for the South African iTunes store how do I get one for the US store?

    I have an apple ID for the South african i Tunes store.  How do I get one for the US one?  I want to use Mind Snacks.

    You will need a valid billing address in the US and be in the US when you want to buy anything from it. You can try requesting that it be added to the South African, but ultimately it's the app's developer that will have to grant Apple a licence to sell it there : http://www.apple.com/feedback/itunes.html

  • HT4972 I was downloading $15 worth of iTunes songs from a gift card when my iPod died. Now, no credit & no songs on my iPod. Where did either my $$ go or my songs that I paid for disappear? How do I get one or the other?

    I was downloading $15 worth of iTunes songs from a gift card when my iPod died. Now, no credit & no songs on my iPod. Where did either my $$ go or my songs that I paid for disappear? How do I get one or the other? I have 2 of the same iPod's and logged onto both with the same as well as different apple ID's and passwords to each respective iPod and the completion of my downloaded songs has disappeared into thin air. Where did it go? How do I get the credit too re-download those songs to the correct iPod? Please help me!! [email protected]

    What happens when you try to redownload them?
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    On a computer go to iTunes>Store>View Account>Sign in and go to purchased history and see if you actually purchased them.
    Try redeeming the card again
    Contact iTunes
    Apple - Support - iTunes - Contact Us

  • Why are two pages yoked when I prepare a newsletter in Pages?  How can I delete one without the other?

    Why are two pages yoked when I prepare a newletter?  How do I delete one without the other?

    They are all part of one Section. Just as you do not (hopefully) rip pages out at random from books, the pages of a Section are linked by the text that flows from one to the other.
    If you want to move or delete particular page/s Insert a Section Break at the end of the page before.
    Peter

  • Pls, how i can delete one of the international keyboards?

    Pls, how i can delete one of the international keyboards?

    You can remove one or more of the keyboards that you've selected via the Edit button at the top right of Settings > General > Keyboards > International Keyboards (the Edit button will be greyed out when there is only one keyboard left selected)

  • How i can deauthorize one of the other computer if i change sistem operation?

    How i can deauthorize one of the other computer if i change sistem operation?
    I have a pc with windows.  Now i change the windows and i cand log in to itunes because i have all 5 authorize and i can't deauthorize other pc beacause i change the windows. Is same pc but a different windows, i can't use the old windows, Someone can help me? PLEASE

    About iTunes Store authorization and deauthorization
    If it applies >  One computer using multiple iTunes Store authorizations

  • How can I get information of the switched channel in an example program from NI?

    When I use the example program "niSwitch DMM Switch Synchronous Scanning.vi", I'am not able to get any information, wich channel is active. Wich block has to be used and how must I connect it to see this.
    The other one is, that te sytax for the scan list, described in the help does not switch through the channel, how has this to be modified?
    Im using a SCXI 1128 in Slot 8 of a 1052 combo chassis and the DMM is a PXI 4070 in the Slot 2.
    Attachments:
    niSwitch DMM Switch Synchronous Scanning.vi ‏145 KB

    Bigmatzeman,
    finally, i got a working solution which should suite you!
    Ok, here is what you have to do/what is missing in your setup:
    First, you can leave the modules as they are already inserted in your chassis.
    Second, you will need a special AUX-cable to synchronize the DMM and the switch. You can find infos on that here
    in the section "Single Module Scanning". Connect the cable between the
    DMM and the front connector of the switch (1331, scanadv. and
    externaltrig.)
    Third, i advise you to use the HV8-BAN4-cable to connected the signals
    to your DMM. This is because the cable is specified for the appropriate
    voltage the DMM and the switch are capable of (300 V). The connection
    of the HV8 can be done in the 1052 above the PXI-slots.
    And at last, open the example "niSwitch DMM Switch Handshaking.vi", set
    the devices to the appropriate identifiers. Select for both triggers
    for the DMM "External" and for both triggers of the switch "Front
    Connector". Change the Scanlist to "ch0:5->com0;". If you are using
    the HV8-BAN4 instead of direct front connector-connection, you have to
    change the code a bit, too: insert a "niSwitch Connect Channels" VI in
    front of the "niSwitch Configure Scan Trigger" which connects "ab0" and
    "com0".
    Ok, now the example should work correctly and you should be able to use all other SCXI modules together with your 6281.
    Hope this helps,
    Norbert
    [Edit]: My setup was 4072, 6052E, 1127 and 1011 (instead of 4070, 6281,
    1128 and 1052 as you do). But that should work just the same way.
    Message Edited by Norbert B on 08-04-2006 10:36 AM
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • How to find which port on the switch that it connected with Mac address?

    Hi,
    I am trying to find which port of the switches it connected to thru mac-address?
    I am able to get the mac-address from the ip address when i do
    "show ip dhcp binding snooping" at the core switch.
    But when I move on to the Edge switch to check which PC with this Mac address connected to the port,i returned with no result.(onli trunk port result)
    I use sh ip arp | inc 000d.60cb.445d
    but didn't give me which port it connected to.
    How to solve this problem?
    thanks!
    KL

    Hi KL,
    If you are already on the edge switch you can run a command "sh mac-address-table address " and it will give you the port number.
    Incase you get a port which is a trunk port that means the end device does not exist on this switch and exist on some downstream switch. So you can just find out the ip address of the downstream switch with "sh cdp neigh detail" command and connect to that downstream switch and then again issue the command "sh mac-address-table address " and check the port number and follow the above steps till the time you get the switch on whcih end host is connected.
    HTH, if yes please rate the post.
    Ankur

  • Deleting photos from last imported also deletes from all imported and videos..how do I keep one of the albums and not the other?

    I downloaded photos from digital camera and created imported photos and videos(want to keep this one) and last imported and all imported "albums".  Too much space.  As I deleted the all imported group the same pictures deleted from last imported and the import and video groups.  How do I keep on one of the albums an my iPad so I have easy access to them?

    That is how the Photos app works, when you 'copy' a photo into an album that you've created in the app then you are effectively just creating a pointer to the photo, you're not creating a separate copy of the photo - so if you delete the original photo you will also be deleting all pointers to the photo, and it will therefore be removed from any albums that you've 'copied' it into.

  • How can I use one of the HD templates in my SD project?

    Is there a way to down convert one of the apple templates to use in my 720x480 DV NTSC project?

    Marco,
    Open up a new project in the resolution you want.
    Copy the layers from the HD project
    Paste them into the group in the new project
    Scale the group to get the right size - if you have overlays on then you will see the boundaries of project.
    Peter
    http://www.idustrialrevolution.com
    MacPro 3G 6G RAM FCP6 M3 FxF1.06   Mac OS X (10.4.9)   XSR Decklink & loads of cool new plugins, Gaggia TD auto

  • I have two iPhones and an iPad under same Apple ID. How can I change one of the iPhones to a separate id?

    I have 2 iPhones & an iPad under 1 Apple ID. How can I change 1 of the iPhones to a separate account?

    Sign out of the Apple ID on the device in question, making sure to disable the Find My iDevice feature.
    Sign in with the new Apple ID.
    If the intent is to sell the device, simply restore as new after disabling the Find My iDevice and signing out.

Maybe you are looking for