How to test if when controltype is client in coded ui

Hi
When i tried to automate an application all the buttons are having the same properties and its control type is client..What is the workaround for this issue...??

Can you explain the problem in more detail please? From the screenshot I am not sure that you have selected the button. I would expect when the button itself is selected by the crosshairs that
ControlType == Button would be shown. Also in the screenshot, to the right of the Add assertion button there are four arrows, the DOWN arrow is dark suggesting that the field selected is some sort of container or panel
and that the button is one of its child controls.
When I use the crosshairs tool I move the mouse pointer around the control slowly watching the blue rectangle to ensure that it encloses the
smallest area that includes the control of interest, I also watch the
Add assertion... window to see that the correct control (and ControlType) have been selected.
Regards
Adrian

Similar Messages

How to test php when creating in DW CS4

I am a bit confused. Here is my set up:
I have DW CS4 on my laptop and I am developing a site for a
client. I have a local copy and I have set up a remote folder using
FTP and utilize this mainly to put my pages on the server.
I do have dynamic content, primarily PHP and up until
yesterday I was able to view these pages using "Preview in Browser"
or Live View. (On a side note, I do not remember how I set this up
before). Well, today I installed IE 8 to start testing on that and
now all of a sudden I cannot use Live View or Preview In Browser
feature anymore. It keeps asking me to set up a testing server and
if I choose not to, all I get is the source code displaying.
I have no problem setting up PHP on my Laptop, but never had
to do this before. Any insight as to what might have happened?
Mike

You may have to look at After Effects for something like this.

How to test the layouts in multiple client environment

asap.

Thanks for your reply Mike. Unfortunately, that OSS note seemed to be directed at an ABAP + Java Add-in install. We have a Java only install. We ended up installing the SCS on a shared cluster drive, which seems to be working and failing over correctly. However, I am still not completely comfortable that this is the best way to install the SCS in a failover environment.

How to test scenario in diffrent clients

Hi All,
I have created a scenario which involves integrating Tibco and ECC systems. My QSN is how to test my scenarion in different clients. I have tested in 100 client , now i want to test in 300 cleint before moving to QA. Do i need to change my configuration to make it work in 300 clients.Please let me know.
Thanks in advance.
Kalpana

hi,
>>>My QSN is how to test my scenarion in different clients. I have tested in 100 client , now i want to test in 300 cleint before moving to QA.
if you want to test it with another client of ERP
then you need to change the config from directory
or use transport targets that will change it for you when you export
and import from directory
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

How to use C:when test... inside column in ADF table

I am using ADF table with below two columns
in First column i have to check the Type of document if it is doc type then i have to use commondlink to download that file ,Otherwise i need to show only text.
for that i added
*<c:when test="{boolean($favoriteType eq 'doc')}">*
which is not working .
please let me know how to use <C:when test... inside column in ADF table
<tr:column sortProperty="favoriteName" sortable="true"
headerText="#{res['favorite.favoritename']}"
width="500" noWrap="false">
<c:choose>
*<c:when test="{boolean($favoriteType eq 'doc')}">*
<tr:commandLink actionListener="#{bindings.downloadFile.execute}"
text="#{row.favoriteName}"
disabled="#{!bindings.downloadFile.enabled}"/>
</c:when>
<c:otherwise>
<af:outputText value="#{row.favoriteName}"/>
</c:otherwise>
</c:choose>
</tr:column>
<tr:column sortProperty="favoriteType" sortable="true"
headerText="#{res['favorite.favoriteType']}" rendered="true">
<af:outputText value="#{row.favoriteType}" id="favoriteType"/>
</tr:column>

Hi Frank,
Thanks it is working like cham..
related to same page i am facing new problem which i posted at below thread
How to get row data runtime @ trinidad table , set rowSelection="multiple"
can u reply on same.
Thanks for all help.
Jaydeep

How to get the IP of the client when TCP connect in the server

How to get the IP of the client when TCP connect in the server.
The only parameter got from the connection is connectionID.
Solved!
Go to Solution.

I guess you're using "TCP Wait on Listener" on the server. This returns the remote address and port (as optional outputs).

How to test VOFM routine for output cntrol-issue o/p when certain conds met

Hai,
I have created a vofm routine 903 for the output type 'ZSH1'.This is for sales order output.
The 903 routine changes the sy-subrc value to non zero if certain conditions met.
My doubt is how to test this vofm routine? where can we check the status of the output processed?
This output is to trigger a smartform.
In my case the output smart form got displayed when I click on print preview even if the condtions met (or) dont met.
Is this the correct way of testing?
Regards,
Bhaskar

Hai All,
Thanks for your replies.
here my question is,
how to test the VOFM (not manual )& where we can check the status of output issued or not issued?
see the step 1.
Step1: goto->va02->from the menu select 'issue output'->select the codition type in the displayed popup->click OK.
after this where can I check the status of the output issued?
or is the way I described in Step 1 is correct or not ?
other way Step 2:
goto VA02->enter order number->goto overview page->from Extras->output->header->edit
in this page maintain the output type & click Save.
after Save , is this the time to check whether the output issued or not? if yes where to check the status?
or again is this the right way to test the VOFM.
Regards,
Bhaskar
Edited by: Mbhaskar_comps on Dec 15, 2010 7:00 AM

How to test HDS client and Server ?

setup :
Client Machine (Win 7 ) -----------------Server Machine ( running AMS )
1. I have configured a Adobe media server 4.5 on windows 2008 machine (SERVER)
2. From the server , I have also configured and also configured the Manifest file . (Waterfall_hds.f4m) . this manifest file has 3 different videos of different bit rate.
3. from server machine , I opened the sample video player from server machine using rootinstall/samples/videoplayers/videoplayer.html and able to play the manifest file using
http://localhost/hds_vod/waterfall_hds.f4m
4. Now , when i go to any of the client machine browser , and type in the same URL , I dont see the video playing ? Do i need a Player ? Flash player is already installed on the client machine
how to play the video from the client browsers ?

Did you drop crossdomain.xml in your webroot folder.
Please search this forum for sample crossdomain.xml.

How to copy system table from one client to another client

Hi,
Currently i am implementing recruitment module in one of the power sector company. I have finished all the configuration in one of the client in development server. I have trasported all the request in Qulaity server so that i can do the testing. When i am running TCode : PBA7 (Direct Data Transfer) i am getting a runtime error with error analysis -
A SELECT, UPDATE, or DELETE statement contains the invalid table
name "PB0021".
I have checked this system table in this client (Quality Server) but this table is not available, but at the same time this table is available in Devepment server client where i can run this transaction.
Requiring your help on this to resolve this issue. Do i need to copy this system table PB0021 from Development server client to Quality server client? If so then how to do this activity?
Thanks in advance....
Regards,
Milind

Hi Milind,
Goto SE01.
Create a workbench request manually.
Add the following entry.
R3TR TABL PB0021.
Transport the request to quality system.
Hope this works.
Best wishes,
Dilek

How to test a simple PL SQL function from another PL SQL script

Hi,
I have created a function. Now i need to test that whether it is returning the correct values or not.
For that, i have written anothe pl sql script and trying to call this function. Im passing all the IN parameters in that function. I assume here that OUT parameters will provide me the result. Im trying to display the OUT parameter one by one to see my result.
I'm using toad as sql client here connected with oracle.
pl sql script:-
DECLARE
BEGIN
     DBMS_OUTPUT.PUT_LINE('$$$$$$$ VINOD KUMAR NAIR $$$$$$$');
     FETCH_ORDER_PRODUCT_DATA(320171302, 1006, 6999,
ODNumber OUT VARCHAR2, Line_Number OUT VARCHAR2,
ServiceID OUT VARCHAR2, BilltoNumber OUT VARCHAR2,
AnnualPrice OUT NUMBER, CoverageCode OUT VARCHAR2)
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | ODNumber );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | Line_Number );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | ServiceID );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | BilltoNumber );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | AnnualPrice );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | CoverageCode );
END;
Function:-
Program Name : SPOT_Order_Product_Data_For_CFS.sql
Description : Function to Validate parameters from CFS
By : Vinod Kumar
Date : 08/19/2011
Modification History
By When TAR Description
CREATE OR REPLACE FUNCTION FETCH_ORDER_PRODUCT_DATA(orderNumber IN VARCHAR2, customerNumber IN VARCHAR2,
productLine IN VARCHAR2, ODNumber OUT VARCHAR2,
Line_Number OUT VARCHAR2, ServiceID OUT VARCHAR2,
BilltoNumber OUT VARCHAR2, AnnualPrice OUT NUMBER,
CoverageCode OUT VARCHAR2)
RETURN VARCHAR2 IS
lv_err_msg VARCHAR2(100) := '';
lv_bucket_id VARCHAR2(14);
lv_bill_number VARCHAR2(30);
lv_anual_price NUMBER;
lv_coverage_code VARCHAR2(8);
lv_quote_num NUMBER(10) := NULL;
lv_line_num NUMBER(5) := 0;
lv_customer_number VARCHAR2(30) := customerNumber;
lv_product_id VARCHAR2(14) := productLine;
lv_count_quote NUMBER := 0;
lv_quote_status VARCHAR2(5);
lv_quote_version NUMBER(2):=0;
BEGIN
IF INSTR(orderNumber, '-') = 0 THEN
lv_quote_num := orderNumber;
ELSE
lv_quote_num := SPT_Delimiter(orderNumber, 1, '-');
lv_line_num := SPT_Delimiter(orderNumber, 2, '-');
END IF;
--Check status of the quote COM, APP
SELECT COUNT(*) INTO lv_count_quote FROM sot_order_header WHERE ORDER_NUMBER=lv_quote_num
AND ORDER_STATUS IN ('APP', 'COM') AND CUSTOMER_NUMBER = lv_customer_number;
IF lv_count_quote = 0 THEN
lv_err_msg := 'Invalid Order number';
RETURN lv_err_msg;
END IF;
-- Fetch the latest version on SPOT quote
SELECT MAX(VERSION_NUMBER) INTO lv_quote_version FROM SPT_QUOTE_HEADER WHERE QUOTE_NUMBER = lv_quote_num
AND CUSTOMER_NUMBER = lv_customer_number;
-- If quote is valid fetch the data in OUT parameters
IF lv_line_num = 0 THEN
BEGIN
SELECT a.CUSTOMER_BILLTO_NUMBER,
b.LINE_NUMBER, b.BUCKET_ID,
b.ANNUAL_REF_RATE_USD, b.COVERAGE_CODE
INTO lv_bill_number,lv_line_num,lv_bucket_id,lv_anual_price,lv_coverage_code
FROM SPT_QUOTE_HEADER a, SPT_QUOTE_LINE b
WHERE a.QUOTE_NUMBER = lv_quote_num
AND a.CUSTOMER_NUMBER = lv_customer_number
AND a.VERSION_NUMBER = lv_quote_version
AND a.QUOTE_NUMBER = b.QUOTE_NUMBER
AND a.VERSION_NUMBER = b.VERSION_NUMBER
AND b.PRODUCT_ID = lv_product_id;
ODNumber := lv_quote_num;
BilltoNumber := lv_bill_number;
Line_Number := lv_line_num;
ServiceID := lv_bucket_id;
AnnualPrice := lv_anual_price;
CoverageCode := lv_coverage_code;
RETURN '';
EXCEPTION WHEN OTHERS THEN
lv_err_msg := 'Multiple PIDs existing in the SPOT order, please provide the SPOT order + line number as input data';
RETURN lv_err_msg;
END;
ELSE
BEGIN
SELECT a.CUSTOMER_BILLTO_NUMBER,
b.BUCKET_ID, b.ANNUAL_REF_RATE_USD,
b.COVERAGE_CODE
INTO lv_bill_number,lv_bucket_id,lv_anual_price,lv_coverage_code
FROM SPT_QUOTE_HEADER a, SPT_QUOTE_LINE b
WHERE a.QUOTE_NUMBER = lv_quote_num
AND a.CUSTOMER_NUMBER = lv_customer_number
AND a.VERSION_NUMBER = lv_quote_version
AND a.QUOTE_NUMBER = b.QUOTE_NUMBER
AND a.VERSION_NUMBER = b.VERSION_NUMBER
AND b.PRODUCT_ID = lv_product_id
AND b.LINE_NUMBER = lv_line_num;
ODNumber := lv_quote_num;
BilltoNumber := lv_bill_number;
Line_Number := lv_line_num;
ServiceID := lv_bucket_id;
AnnualPrice := lv_anual_price;
CoverageCode := lv_coverage_code;
RETURN '';
EXCEPTION WHEN OTHERS THEN
          lv_err_msg := 'Multiple SPOT lines exist with same parameter';
          RETURN lv_err_msg;
END;
END IF;
EXCEPTION
WHEN OTHERS THEN
lv_err_msg := '@@@ EXCEPTION THROWN @@@ '|| SUBSTR(SQLERRM,1,120);
RETURN lv_err_msg ;
END;
Don't look at the function, it might have errors but my primary concern is how to test this function. Once I start doing its testing then only i can understand any bugs(if any).
My pl sql is not so good. Im still learning. I don't understand IN and OUT parameters are.
I just know that IN parameters r those whick we pass in to the function wen we call it and OUT parameters are those through which we get the result.
Thanks in advance
Vinod Kumar Nair

20100511 wrote:
I wondered how I could test the output of the function from within TOAD?I usually create the following function in my developer schema:
create or replace function BoolToChar( b boolean ) return varchar2 is
begin
if b then
    return( 'TRUE' );
else
    return( 'FALSE' );
end if;
end;To test a function like yours, the following will do in SQL*Plus/TOAD/etc:
begin
DBMS_OUTPUT.put_line(
    BoolToChar( XCCC_PO_APPROVALLIST_S1.does_cpa_exist(1017934) )
end;
I'm probably doing 101 things wrong here, but thought I'd ask anyway and risk being shouted at.Shout at? You reckon? I thought people risked being beaten with a lead pipe, or pelted with beer cans and stale pretzels - which makes being shouted at a really safe and viable alternative. {noformat};-){noformat}

How to control one server with multiple clients via TCP/IP

I am wanting to control a single server with multiple clients. Only one client would be active at a time, so there would be no conflict. I want to use TCP/IP. So far, I have programmed a cluster that passes data back to the server with no problems. The challenge come in when a second client is added to the mix. I have't been able to figure out how to turn each client on and send the appropriate data and then turn it off so it doesn't keep sending the same data to the server.
Here are the things that I have considered and did some preliminary testing, but don't really know how to impliment:
1. Send a numeric on the front of the cluster packet that tells the server that data is on the way.
2. Send a boolean on the front of the cluster packet to somehow turn the server TCP/IP on.
The problem I have found is that LabVIEW TCP/IP doesn't like to be turned on and off. If it doesn't get the data it expects, it goes into a reset mode and that kills the response time.
Any help?

You should consider implementing a set of simple one-byte commands that can be sent back and forth between the Server and the Clients. You can base all of these ideas off the example in the Example Finder under Networking >> TCP and UDP called Multiple Connections - Server.
You will have two loops in the server VI: one to wait for new connections, and one to send and receive data from the existing connections. For instance, after one of the clients connects, it can request control of the server to send data to it by sending the character "R" for request. Every time the send/receive loop of the Server executes, the first thing it can do is to check all the existing connections to see if any of the clients have sent a control request ("R"). If so, it will create a buffer (array) of control requests. This could be in the form of Connection IDs or indexes in the array for a particular Connection ID. Your choice.
After the Server receives a request for contol, if it is not already under control by another client, then it can send a response to the first client on the control request list. For instance, the server could send the first client a "S" command for send. Note that after the clients send their control request, they should execute a TCP Read and wait indefinitely for the server to respond with the one-byte "S" command. Then, once the client in control is finished sending data to the server, it could send the character "X" telling the Server to release it from control.
The example I mentioned above already does a similar thing. Note how when a client wants to disconnect, they send the letter "Q". You can see this in the Multiple Connections - Client VI. The Server then checks each individual connection to see if it's received this one-byte command, and if it has, it closes the connection to the client. This is what you would want to implement, but instead of having just one command, you'll have to distinguish between a few and build up a buffer of control requests.
Finally, if a client does decide to disconnect in your application, they could send the command "Q" just like the example above. At this point, close the connection and remove that Connection ID from the array of connections. You will also have to handle the case that this client was in the request control waiting line when it disconnected, in which case you need to delete it from that array as well.
This will definitely work for you, but it will take some work. Best of luck!
Jarrod S.
National Instruments

How to test oracle is up and running in remote machine using shell script

Hello,
I need help to write an linux script.
I have a java application server running on machine 192.168.5.20 and our oracle 10g standard 1.0.2 is running on machine 192.168.5.21.
I have found script to start oracle when computer is turned on.
But I cannot start my application server automatically since it depends on whether oracle is up and running or not on the remote machine.
Therefore, in case of power failure or maintenance, our client has to call us to start application server.
I would be grateful if someone can help me "How can I write script to check oracle is up and running in machine 192.168.5.21 from machine 192.168.5.20.
For your information, I have no oracle installed in application server. So tnsping won't work.
What I want is when power is back, application server script automatically and tesing for oracle server is up and running. If it is up, script will start application server.
Thanking you.

Hi,
It's not failover or experimental. My application server uses JBOSS and JBOSS needs database name to start up. My enviroment is LAN. My database is in different machine as I mentioned before. So In case of power failure, I need to start my application server (JBoss) manually, because I need to confirm that oracle is already running before start app server.
I want an automated script (when power is just on) to start my application server which will wait to check if the datbase server is up I will start application server.
The scripts given above It works if appserver and db server in the same machine (my development machine).
But when I test the script in my production applicaiton server, It shows sqlplus command not found (my app server does not have any oracle client installed).
About hostname yes My applicaiton server hostname is hostapp1 and dabase server hostname is hostdat1.
Do you think Is it possible to test the script without oracle client not installed. or It has to be done writing code like java program and test using jdbc connection.
Best regards.

How to print formated data/report on client's printer (Web Application)

Hi All
I want to print some formatted data/report ( it might be 1000 pages) on user's printer.
Application is web based
Technology used are Java - jsp - servlets
i want functionality like...
when user click on print button/link, data is fetched from server and all pages (it is formated data so i want alignment on page while printing) should be printed one after another.
Also printer selection dialog should displayed one time when user click on print button/link.
Questions:
1. How i will transfer all data to client (web browser) from the server ??
2. And how i can print that data on user's printer ??
There is requirement (or limitation) that I can not use applet for this purpose.
And also it is not fix that we must use java tech., we can use any othere tech. but condition is that it must support multiple platform (in short platform indipendant)
There is solution like ...
I can use window.print() function of DOM/JavaScript,
but it prints only one page which is displayed on browser.
I don't want to display any page. and want to print all pages.
if any one done or have idea then let me know.
Thanks in Adv.
Shailesh Koradiya

thanks linxpda for reply,
we can use ActiveX component for windows platform for printing purpose, same way we can use platform specific component for printing... (for linux, unix, sun solaris etc...)
if it is possible then let me inform.
Thanks,
Shailesh Koradiya

How to refresh XML file from my client machine

Hai All
I have temp.XML and temp.XSL template in our server machine.
when i give a print from client machine first time it gives the record,and next time it did not get refresh.Always it shows the previous records in the browser.But when i go into the server machine and click on temp.xml,it shows the current record(correct records)
How to refresh XML file from my client machine?
Regards
Dhina

You never delete a Time Machine backup by dragging it to the Trash. You are supposed to use the TM application to manage the backups. What you will need to do now is to simply erase the drive using Disk Utility.

How can I transport data from one client to another client?

How can I transport data from one client to another client?
Regards,
Subho

hmmm, CTS = cutomizing transport?
If you have a customizing table, there are still two possibilities.
1. customize in DEV system and transport
2. customize right there where you need it.
this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2.

How to test if when controltype is client in coded ui

Similar Messages

Maybe you are looking for