How to Test, Inbound idoc ,with out the Sender System, using a Text File

Hi Guru's .
we wanted to test BLAORD03 inbound idoc (Message Type BLAORD).with out the SENDER SYSTEM.
on the same client.
we wanted to test this idoc with text file from our local machine.
Can anyone give us detail steps.like how to create  File layout
with Segment name,and values for the fields.how to pass this file to the system.
Thanks in advance.

Hi Aparna.
My requirement is to test the idoc with Inbound File.
Generate a file with the data entered through segments through we19 ,and use the same file for processing through we16.
when i am trying to do this syst complaing about
Partner Profile not available, and some times
port not available. and some  times with
'No further processing defined'.
but i maintained part profiles and port perfectly.
Can you help me in testing with test 'File' port.

Similar Messages

  • Inbound idoc  error in the source system

    HI,experts
    I manually configurate the idoc type ,message type ,etc between the BW system and r/3 source system when the automatic program encouters errors. And the communication between BW and source sysyem  seems ok since the source system is activated successfully in BW side.
      But when I check the inbound the idoc in source system  after i triggerred a full load for the datasource 0FI_GL_4,an error occurs in the inbound process in R/3. There is no  control information in the idoc which message type is RSRQST.
    how can i figure this issue out ?could anyone help me ?

    HI,ALL
    Thanks for your replies and documents.
      Now I find the problems lies in the error connection between R/3 and BW. IF the autoconfiguration is completelly correct , the table RSBASIDOC in both system should be added one record.But now when the source system is activated successfully ,the table in R/3 side has no entry while the BW side has one entry .juding from this ,there is no BW system connected to the R/3 ,which is proved when I fill the setup table for LO datasource an error message shows that there's no BW system is connected to the OLTP system.
      How can i figure this issue out ?If I want to do an automatic configuration ,what shall I do ?

  • How to edit inbound idoc with data errors in multiple segments and reproces

    Hi friends,
    i have a requirement for error handling of inbound sales order(ORDERS04) without using WORKFLOW and WE19.
    i have seen some function modules like edic_* ..
    but my doubt is how to edit the error data(how can i identify the particular error fileds in the segments)and how to reprocess the same idoc.
    Please help me...
    Thanks in advance

    Hi Narasimh,
    Please find the following steps to edit IDOC segment after you find the error using WE02.
    The example codes can be found in website 
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    STEP 1 - Open document to edit
    CALL FUNCTION 'EDI_DOCUMENT_OPEN_FOR_EDIT'
           EXPORTING
                document_number               = t_docnum
           IMPORTING
                idoc_control                  = itab_edidc
           TABLES
                idoc_data                     = itab_edidd
           EXCEPTIONS
                document_foreign_lock         = 1
                document_not_exist            = 2
                document_not_open             = 3
                status_is_unable_for_changing = 4
                OTHERS                        = 5.
    STEP 2 - Loop at itab_edidd and change data
    LOOP AT itab_edidd WHERE segnam = 'E1EDKA1'.
      e1edka1 = itab_edidd-sdata.
      IF e1edka1-parvw = 'LF'.
        e1edka1-partn = t_eikto.
        itab_edidd-sdata = e1edka1.
        MODIFY itab_edidd.
        EXIT.
      ENDIF.
    ENDLOOP.
    STEP 3 - Change data segments
    CALL FUNCTION 'EDI_CHANGE_DATA_SEGMENTS'
               TABLES
                    idoc_changed_data_range = itab_edidd
               EXCEPTIONS
                    idoc_not_open           = 1
                    data_record_not_exist   = 2
                     OTHERS                  = 3.
    STEP 3a - Change control record
    CALL FUNCTION 'EDI_CHANGE_CONTROL_RECORD'
           EXPORTING
                idoc_changed_control         = itab_edidc
           EXCEPTIONS
                idoc_not_open                = 1
                direction_change_not_allowed = 2
                OTHERS                       = 3.
    STEP 4 - Close Idoc
    Update IDoc status
    CLEAR t_itab_edids40.
      t_itab_edids40-docnum      = t_docnum.
      t_itab_edids40-status      = '51'.
      t_itab_edids40-repid       = sy-repid.
      t_itab_edids40-tabnam      = 'EDI_DS'.
      t_itab_edids40-mandt       = sy-mandt.
      t_itab_edids40-stamqu      = 'SAP'.
      t_itab_edids40-stamid      = 'B1'.
      t_itab_edids40-stamno      = '999'.
      t_itab_edids40-stapa1      = 'Sold to changed to '.
      t_itab_edids40-stapa2      = t_new_kunnr.
      t_itab_edids40-logdat      = sy-datum.
      t_itab_edids40-logtim      = sy-uzeit.
      APPEND t_itab_edids40.
      CALL FUNCTION 'EDI_DOCUMENT_CLOSE_EDIT'
           EXPORTING
                document_number  = t_docnum
                do_commit        = 'X'
                do_update        = 'X'
                write_all_status = 'X'
           TABLES
                status_records   = t_itab_edids40
           EXCEPTIONS
                idoc_not_open    = 1
                db_error         = 2
                OTHERS           = 3.
    Hope this will help.
    Regards,
    Ferry Lianto

  • TS1292 my code on my itunes card has come off, how can i redeem it with =out the code,

    when trying to take the sticky off the back of the card all the code has come off. I do have receipt for it as i bought in a supermarket today, how can i redeem this itunes card now, as i paid 25pds.

    See this support article:
    http://support.apple.com/kb/TS1292
    If you can't get the card to work after perusing that page, as will obviously not be possible if the code has come completely off, contact the iTunes Store Support; instructions are at the bottom of that article.
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • How to remove icloud account with out the password?

    i buy used iphone and there is icloud and i want to make format but i don't know the icloud password what i can make ?
    the serial number :  01**********171
    note:
    the icloud not mine it's for breveas user for the phone.
    the icloud email for the breveas user is : @live.co.uk
    and my email is @hotmail.com
    thanx,
    <Personal Information Edited by Host>

    ashraf90 wrote:
    i buy used iphone
    the problem I don’t know the previous owner and I tried to send him massage on his email but he didn’t answer
    Then you have a Serious problem... because the Apple ID and Password that was Originally used to Activate the iDevice is required.
    If you cannot get this information from the seller
    Removing a device from a previous owner’s account
    you need to return the Device for a refund, as you will not be able to re-activate it.

  • How to create Inbound Idoc from XML file-Need help urgently

    Hi,
    can any one tell how to create inbound Idoc from XML file.
    we have xml file in application server Ex. /usr/INT/SMS/PAYTEXT.xml'  we want to generate inbound idoc from this file.we are successfully able to generate outbound XML file from outbound Idoc by using the XML port. But not able to generate idoc from XML file by using we19 or we16.
    Please let me know the process to trigger inbound Idoc with out using  XI and any other components.
    Thanks in advance
    Dora Reddy

    Hi .. Did either of you get a result on this?
    My question is the same really .. I am testing with WE19 and it seems SAP cannot accept an XML inbound file as standard.
    I see lots of mention of using a Function Module.
    Am I correct in saying therefore that ABAP development is required to create a program to run the FM and process the idoc?
    Or is there something tht can be done with Standard SAP?
    Thanks
    Lee

  • How much space on the hard/flash drive does the Operating System use on the macbook

    I Would like to buy a MacBook but the actual space on the flash hard drive is quite minimal. How much of this small space does the operating system use?

    In order for Yosemite needs to have at least 10 GB of free space for the use of OS X and the things it does. If you have less then that the performance with start to degrade until eventually OS X will freeze up.
    If you think you will be getting close to that you might want to consider getting and external disk drive where you can store some of your file such as music, videos movies and photos.

  • How to create shipment document with out inbound delivery document

    Dear Friends
    How to create shipment document with out outbound/inbound delivery document.
    In my client scenario, there is no inbound delivery for normal purchases.
    Just there are raising the PO to vendor, then they are doing MIGO for goods receipt.
    Can we do shipment creation with reference to PO?
    If it is possible, how it will be?
    Please let it solve
    With regards
    Lakshmikanth

    Dear Sameer,
    Please go to transaction VT01N here you enter Transportation planning point and shipment type then press enter.
    Now system will take you to the shipment document creation screen here you click on Select deliveries or press F6 now system will take you to the select outbound deliveries screen in this screen you enter selection data then execute, now deliveries will get assigned to that shipment.
    After assigning the deliveries enter the remaining data then complete the shipment finally save the shipment document.
    For more information please go through this SAP help link
    Note:- Shipment process need to be carry out for the deliveries before PGI.
    http://help.sap.com/saphelp_47x200/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
    I hope this will help you,
    Regards,
    Murali.

  • How to process inbound idoc in R/3 with status 75 - idoc received via qRFC?

    Hi gurus,
    we are using EOIO for source to R/3, and all the idocs a received in r/3 with this status. But they can't be processed from BD87. How to process these?
    Thanks,
    Olian
    Edited by: Olian Saludew on Sep 11, 2008 11:44 AM

    Hi,
    Idocs Works on tRFC Queues.
    Check this Report to Process Inbound Idocs with Specified Status.
    RBDAPP01
    Regards
    Seshagiri

  • I have like five GB's of ghost data (data the device claims is not there but it is still taking up space) on my I pad 2 from a failed movie download attempt. How do I fix that with out resting my iPad? I have only 1GB left of storage

    I have like five GB's of ghost data (data the device claims is not there but it is still taking up space) on my I pad 2 from a failed movie download attempt. How do I fix that with out resting my iPad? I have only 1GB left of storage
    The movie had gotten to the point that I could watch it all the way through but it still said processing and got stuck at that point and when I turned off the wifi to try to restart it, it deleted its-self but did not free up any of the storage It was taking up
    Restarting my iPad does not help
    Some thing similar also happened to my old laptop when trying to download the iOS 5 update to my laptop when it came out. It kept getting disconnected and every time it would try to start over and act like what had already been downloaded was not there though it was still taking up the storage space.
    And it continued repeating until it took up all of my storage space. The data file would not show up anywhere so I had to restore my laptop to the factory settings and that worked for awhile but I eventually had to get a new laptop.

    Did you try to set it up as new device, as explained in this article?
    How to erase your iOS device and then set it up as a new device or restore it from backups
    If this does not work, use iTunes to set it back to factory settings, which would also install the latest software:
    Use iTunes to restore your iOS device to factory settings - Apple Support

  • I cant remember my password to logon to my mac, how can i change it with out needing the old one?

    i cant remember my password to logon to my mac, how can i change it with out needing the old one?

    http://support.apple.com/kb/HT1274

  • How can I completely wipe the hard drive with out the Mac OS X disc? I don't need any of the info on the computer.

    How can I completely wipe the hard drive with out the Mac OS X disc? I don't need any of the info on the computer.

    You can't unless you have a bootable system on an external drive you can use. Otherwise, you need either the original disc that came with your computer or a retail copy of Snow Leopard DVD. The latter contains 10.6.3, so your model must be capable of booting from that or an earlier version of OS X.
    You can purchase replacement discs from Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.

  • I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

    I could really use some insight into this please also how many gigs of RAM should my power mac have it only has two right now and logic tends to glitch up majorly.

    My original question :
    I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

  • How can Siri still tweet and post to Facebook if I just changed my password from the respective websites, with out the iphone "knowing" I changed my passwords?

    How can Siri still tweet and post to Facebook if I just changed my password from the respective websites, with out the iphone "knowing" I changed my passwords?

    If you buy an iLife '11 install DVD (eBay, Amazon) you could upgrade your iPhoto right away. The earlier iPhoto '11 versions are compatible with MacOS X 10.6.8.
    but I can't until I upgrade from OS X 10.6.8.  Trying to figure out how to do that...
    To upgrade to Mt. Lion see here:  You can buy it and download it from the appStore, if your mac is compatible:
    http://www.apple.com/osx/how-to-upgrade/

  • My iPad Air is disabled after wrongpassword attempts.I didn't sync it with my laptop also. How can I restore it with out losing the data.

    My iPad Air is disabled after wrongpassword attempts.I didn't sync it with my laptop also. How can I restore it with out losing the data.

    You can't unlock it without losing data. It's too late for that now. You totally erase the iPad when you unlock it and you will have to start all over again. Most of your purchased content can be downloaded again.
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Download past purchases - Apple Support

Maybe you are looking for