How to test integrated configuration?

Hi,
I've set up an Integrated Configuration.(ICO)
I know i cannot test from Tools >> Test Configuration
I'm testing from RWB, i suppose i have to put my xml using the adapter engine test message option instead of the integration engine test option. You think that is correct?
Whatever i do i still get an error message saying there is no receiver determination for the given business component and interface. I thought for ICO you dont need Receiver Determination? Am i wrong?
Are there other/better ways to test this ICO?
Thx
Robert

Hi,
Small recap of the issue: i want to test an Integrated Configuration from the RWB.
My scenario is File to SOAP (synchronous)
All cache refreshes both in SXI_Cache and CPA cache were good.
If i test from RWB >> INtegration Engine >> Test Message then i get the following return:
".... Error While Sending Message: Error stack from response: No receiver could be determined...."
(this response is understandable: ICO is not on the IE and the combination of Sender Component/INterface/Namespace will not be found there, so we get an error)
But...
If I test from RWB >> Adapter Engine >> Test Message with these details:
Sender Component = Sender Comm Component from ICO
Interface = Sender Interface from ICO
Namespace = Sender Namespace from ICO
User/Passw are good
QoS: Best Effort
XML = good
then i get the following result:
"....Error While Sending Message: Additional error text from response: com.sap.engine.interfaces.messaging.api.exception.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=TEST_ICO;TS=;AN=SIOS_ICO_ReadCustomer;ANS=urn:vitens:isu:installation:create; in the current context [Unknown]. ......"
receiver agreement?
So i wonder if it is possible at all to test the ICO from the RWB?
Any comments are helpful.
Also i'm wondering if there could be installation settings wrong for AAE (we're on PI 7.11)
Or maybe there are settings in the Service Interface i should do differently?
Kr
Robert

Similar Messages

How to test KM configured with a TREX?

Hi!
I have configured a TREX for an EP7.0's KM.
Could you tell me how to test the TREX ability?
One example is appreciated.
Thanks a lot!

First
Go to System admin-> monitoring -> Knowledge Management and check TREX monitor. All should be green
Then you can create an index in system admin-> System Config-> KM-> index Administration. Search for that in SDN.
Then create a search iview . for this also search in SDN as these are very straight forward.
once index is created then you can mointor that also in
system admin-> monitoring->KM-> Index monitor.
Raghu

How to handle Integrated Configuration performance impact on AAE/Java AS

Hi there,
Recently I have moved a configuration scenario from standard flow involving both ABAP and Java stacks, to Integrated Configuration usage. Undoubtedly, this will increase the load on AAE/Java stack. However, do you have link to some clear (official - even better) guidelines - what configurational changes should be done on Java side in order to handle the performance impact of such transition?
Best Regards,
Lalo

Hi Lalo,
In fact, using AAE generates no traffic in ABAP stack at all (it is ommited when processing a message), while the traffic in Java stack should be lower than for normal scenario. The performance should be noticeably better, thanks to smaller number of persistence steps and no costly HTTP connections between stacks. For more details, please refer to this document:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2016a0b1-1780-2b10-97bd-be3ac62214c7
Important quotation from this document:
Since the Integration Engine is bypassed for local message processing in the AAE, the resource consumption both in memory and CPU is lower. This leads to higher message throughput, and faster response times which especially is important for synchronous scenarios.
Moreover, have a look at this document, especially its beginning, for details about the architecture of AAE processing:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b
Hope this helps,
Greg

How to test and configure custom extensions in Flash Pro CC?

Hi,
How do you install custom CS extensions in Flash Pro CC for testing and debugging before they have been signed and packaged?
We have a custom extension for Flash Pro developed in-house using the CS SDK that we've been using with flash pro CS5 and CS6 but we're having trouble getting it to work in CC and I'd like to run it locally in test/debug mode.
With flash pro CS6 and CS5 it was possible to test extensions by copying the output folder from flash builder into the CS Service Manager root folder (e.g. /Users/<username>/Library/Application Support/Adobe/CS6ServiceManager) and setting PlayerDebugMode to 1 in the CSXS preferences.
I've added the PlayerDebugMode=1 flag to com.adobe.CSXS.4.plist however, I can't find the equivalent service manager folder for Flash Pro CC to copy the extension into.
Is there a different folder to use for CC or is the process for testing extensions completely different? (are extensions written in the CS SDK even compatible with CC?)
I'm running Mac OS Lion.
Thanks,
Stephen

Thanks, that explains a lot.
I'm afraid I'm a bit confused about what the preferred way of developing extensions is going ahead. There seems to be a lot of conflicting documentation on the adobe site, e.g. http://www.adobe.com/devnet/creativesuite.html seems like the top page for extension documentation but it only talks about CS SDK 2.0 which uses CSXS and doesn't seem to be compatible with creative cloud apps.
Then there's CS Extension Builder 2.1 which looks like it supports Flash Pro CC but isn't mentioned in the pages you linked too and it doesn't mention JSFL, but talks about the CSAW library.
Do you know if:
* The CS SDK has been dropped completely?
* CS Extenstion Builder is deprecated? (I can't see it as an option in the list of Creative Cloud apps)
* Is then any documentation/utilities to help migrate existing CSXS extensions to work with creative cloud apps?
Thanks,
Stephen

Integrated configuration (PI 7.1) throws error when do 'Test Configuration'

I am doing Proxy to Web Service (SOAP) sync scenario. We are using Integrated Configuration. After created integrated configuration and test this from (Tools --> Test Configuration) it throws the following error at the receiver agreement step.
Sender Agreement - Green
Receiver Determination - Green
Interface Determination - Green
Operation Mapping - Green
Receiver Agreement - Red.
Problem occurred in receiver agreement for sender -DR4400_D to receiver -ESRI,urn:AssetManagement.AddressManagementSearchCapabilitiesFromECC_Out: No standard agreement found for , DR4400_D, , ESRI, urn::AssetManagement, AddressManagementSearchCapabilitiesFromECC_Out

Test Configuration cannot be used to test Integrated Configuration Scenario.....refer my reply here:
Re: Integrated Configuration in PI7.1
Regards,
Abhishek.

How to test a plug_in without Adobe Reader Integration Key?

I havge a project to create a plug_in for acrobat reader with Adobe Acrobat 8.1 SDK. I also apply for the Adobe Reader Integration Key, but I have not it by now. But deadline of the project is coming, is there any one who can tell me how to test the plug_in without Adobe Reader Integration Key?
I also have another question, does the plug_in I make with Adobe Acrobat 8.1 SDK can be compatible for all the version of Acrobat reader, such as 7.0, 8.0 and so on? Thank you.

You test the plug-in, as well you can, using Acrobat. You also build
it using the preprocessor options to build a Reader plug-in, so you
don't accidentally use an API not in Reader.
If you are saying, is there w way around the Integration key for
testing in Reader, the answer is no.
Different Reader keys and tools are needed for each version of Reader.
You will probably not get a key for an old version of Reader.
Aandi Inston

How ro move integration services from dev to test

hi
how ro move integration services from dev to test

You should be able to export/import the models/metaoutlines.
In the EIS console go to File > XML Import/Export and export the Model and Outline to XML, then import into your target environment.
Cheers
John
http://john-goodwin.blogspot.com/

Integrated Configuration- Problem occurred in receiver agreement for sender

Hi , I am using AAE in PI 7.1 and it is proxy to file scenrios.
When Ia m doing testing in Integration Directory in test configuration its giving me this error .
Problem occurred in receiver agreement for sender -<ECCBUSINESSSYSTEM> to receiver -BS_D_EPS,http://abc.com/sap/pi/HR/Qualifications.Qualifications_Async_Out: No receiver agreement found for , -<ECCBUSINESSSYSTEM> , BS_D_EPS, http://abc.com/sap/pi/HR/Qualifications, Qualifications_Async_Out
( here it should take interface Qualifications_Async_In, but logs says it is pointing to outbound interface)
here when I am going in to trace logs then it seems that are not able to understand the receiver interface . rather then it is taking sender inface in logs..
In trace logs . I am getting
Receiver Determination
<Not found>
<Trace level="1" type="B">CL_RD_PLSRV-ENTER_PLSRV</Trace>
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
<Trace level="2" type="T">Start with given receiver - BS_D_EPS </Trace>
<Trace level="2" type="T">Using Receiver Determination 00000000000000000000000000000000 </Trace>
<Trace level="1" type="T">No Relation found - accept given Receivers. </Trace>
<Trace level="2" type="T">...extracting Receiver from Header: BS_D_EPS </Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules. </Trace>
<Trace level="3" type="T">...create rule engine </Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0 </Trace>
<Trace level="2" type="T">Number of Receivers:1 </Trace>
<Trace level="1" type="E">CL_RD_PLSRV-ENTER_PLSRV</Trace>
Interface Determination
<Not found>
<Trace level="1" type="B">CL_ID_PLSRV-ENTER_PLSRV</Trace>
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
<Trace level="1" type="T">...There is no Interface Determination configured for receiver party and receiver service BS_D_EPS </Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) BS_D_EPS Qualifications_Async_Out </Trace>
<Trace level="2" type="T">...valid InbIf without Condition: Qualifications_Async_Out </Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1 </Trace>
<Trace level="1" type="E">CL_ID_PLSRV-ENTER_PLSRV</Trace>
Operation Mapping
<Not found>
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
<Trace level="2" type="T">......attachment XI_Context not found </Trace>
<Trace level="3" type="T">Mapping already defined in interface determination </Trace>
<Trace level="1" type="T">No mapping configured </Trace>
<Trace level="1" type="E">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
I have developed the other integrated configuration scenario and this is working fine .
please let me know how can I troubleshoot it

I am using sender as Soap and receiver as File adapter.
here the problem is that while going for interface deteremination and receiver agreement it is calling to Outbound interface .
It should call the inbound interface. I put all the details correctly and deleted all the objects and crated again for both Ir and Id..
I put the name of inbound interface in configuration but while executing its calling outbound interface.

How to test the payload in XI

Hi all,
could please explain how to test the payload in xi and with steps.
Thanks in advance,
Radhika

Hi Radhika,
You can test in three ways.
1.) In message mapping directly give the relevant data and then execute. Here you can test whether the mapping is correct or not.
2.) In Integrstion Directory after completing and activating the Configuration, in tool you can find the Test Configuration tab. There you can give the sender and receiver details along with payload. Here you can test whether the Configuration is correct or not.
3.) In RWB in COmponent monitoring. Select the Integration Engine Monitoring. Here give the sender and receiver details, Interface name, name space, Quality of service.
Now give user name and pass word.
Paste the payload from massage mapping and then press test tab. Here yoyu can directly send the message from XI server to the receiver system.
Ok,
Jeevan

Question about Integrated Configuration (Advanced Adapter Engine in PI 7.1)

Hello,
When you use Advanced Adapter Engine in PI 7.1 with Integrated Configuration scenario, it bypasses ABAP stack therefore you can't monitor processed message in SXMB_MONI. Instead this message shows up only in RWB Adapter Engine message monitoring. When you select the message from there, you can view the BEFORE mapping payload in Message Content tab. My question is how do you view the AFTER mapping payload when using Integrated Configuration.
Thanks,
Jay

> My question is how do you view the AFTER mapping payload when using Integrated Configuration.
You can't.
So first you have to configure a standard scenario and test the stuff. When everything is fine, remove the standard scenario and create an Integrated Configuration.

Integrated Configurations com.sap.engine.interfaces.messaging.api.exception

Hi guys,
we are using PI 7.11.
With this release local processing on the advanced adapter engine is possible, when using integrated configurations.
This works fine.
Lately I faced an error situation in an RFC to JDBC scenario, when one field doesn´t meet the conditions of the database.
I tried to dig deeper to identify the incorrect value by switch on the trace in the receiver JDBC channel, as I did several times before.
Afterwards I treied to restart the message.
Following error occurs.
com.sap.engine.interfaces.messaging.api.exception.ConfigException: Unable to retrieve interface determination with object ID ab1bf720bf2711dea7d2020000000030 from CPA cache.
I made some test with integrated configurations (FTP to FTP) and come to the result that errors, which require changes on the communication channel e.g. wrong password etc. result in an new object in the CPA cache
trying restart the failed message ends up in the error specified aboce.
Anyone faced the same issue already?
Kind regards
Jochen

HI Jochen,
I feel that you should once go for a CPA Cache refresh from Adapter Engine and try executing your failed messages once again in the adapter engine.
To do a CPA Cache Refresh from the Adapter Engine:
To trigger a cache refresh from the individual Adapter Framework, open a browser window and enter the following URL:
http://<host>:<port>/CPACache/refresh?mode=delta|full
The Monitoring url is like this:
http://<host>:<port>/CPACache
Check this How-to Guide on Cache, it will be useful:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34&overridelayout=true
Thanks
Dhwani

How to test XI project..

1.How to test xi projects?
2.then how to test our scenario? Is there any testing tool is available to test the scenario?
3. What is CCMS? how it is useful in XI ?
Thanks in advance
Rakesh

Hi Rakesh,
+1.How to test xi projects?
2.then how to test our scenario? Is there any testing tool is available to test the scenario?+
XI is about messaging. So the way to test an XI implementation would be to test the messaging. Two options for doing that...
1. Test the implementation without the Application systems. The plain J2SE adapter really comes in handy here. You can use it to send an XML file to the Integration Server, check whether it is getting through the pipeline as intended (which means the routing, the mappings, etc), and let it pop out to a file somewhere. You can check all the steps the message has gone through from the XML monitor (sxmb_moni).
2. Test the actual implementation with the application systems. For this you would use the testing tools of the application itself.
I do not know of any automated tools for testing XI configuration, or any way of testing it without actually sending a message across.
What is CCMS? how it is useful in XI ?</b>
I can give you some info regarding CCMS, but the rest will try finding out and let you know soon. Mean while pls go through this info on CCMS.
When CCMS is not configured you can only do individual monitoring.
To configure the same you must decide which system is to be the central system for the SCR.
To know what SCR is and to know more about it please go through this link.
https://help.sap.com/saphelp_nw04s/helpdata/en/1e/ec9e38f0d92936e10000009b38f8cf/content.htm
After doing the same please follow these steps.
Log on to the system that is to contain the central repository.
- Choose CCMS ® Configuration ® Alert Monitor, or call transaction RZ21.
- Choose Technical Infrastructure ® System Repository ® Set Repository Role.
- The system displays the Set Repository Role in Central System Administration screen. Choose Central Repository.
And also go through the following links. This I guess will help you solve your problem and I guess it answers your question.
https://help.sap.com/saphelp_nw04s/helpdata/en/e5/15a0380d134f6fe10000009b38f8cf/content.htm
/people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
Regards,
Abhy
Message was edited by: Abhy Thomas

How to test an scenario

Hi,
After completing a scenario(eg:file to filr),how to test it...whether it is working fine or not..
Thanks in advance.

Hi,
In order to test you file to file scenario,
First test whether your mapping is working fine in the integration repository(Design) by going into your message mapping test tab, then provide the necessary values there and test it.
If it is correct it will display the output, if not it will throw some errors.
Next to test the interface with configuration go to test configuration in Integration directory and provide the necessary values of sender and receiver details along with payload and test it.
To do an end to end testing, you need to place the input file in the source directory.
For the input file, go to message mapping and go to test tab and provide the details and select the src(xml) file and place it in source directory along with the file name and extension you have provided in the integration directory sender communication channel.
If the file is not picked up the goto RWB and check the communication channel monitoring for your sender channel.
If file is picked and it has error it will display when you enter the tcode sxmb_moni.
If file is processed successfully and file has not reached target directory then check your receiver cc in rwb.
I hope it clears your query.
Regards,
Nithiyanandam

How to test scenario in diffrent clients

Hi All,
I have created a scenario which involves integrating Tibco and ECC systems. My QSN is how to test my scenarion in different clients. I have tested in 100 client , now i want to test in 300 cleint before moving to QA. Do i need to change my configuration to make it work in 300 clients.Please let me know.
Thanks in advance.
Kalpana

hi,
>>>My QSN is how to test my scenarion in different clients. I have tested in 100 client , now i want to test in 300 cleint before moving to QA.
if you want to test it with another client of ERP
then you need to change the config from directory
or use transport targets that will change it for you when you export
and import from directory
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Unit Testing / Integration Testing

Hi all
Can somebody provide links to SAP testing....
Can anybody define & write down the step by step details on carrying out unit testing, integration testing and user acceptance testing...How it is done..which systems..tools..test scripts / test cases etc

hi,
For all kinds of testing the first thing is to enumerate the scenarions i.e preparing a list of scenarions that need to be tsted. this wud include the test data and also the desired results. templates are provided by the consultants to the end users. thse templates have a description of the scenarios, the data used, the transacion codes, the docs generated and if the desired results were obtained. thse need to be certified by the concerned.
integration and unit tsting can be done on the same or different clients depanding on system landscape. user accptance testing is generally after the interfration tests have been satisfactorily conducted. different knds of users are asked to do the tests once their id roles and profiles are created. this phase shud be handled as if live production envirionment.
saurabh

How to test integrated configuration?

Similar Messages

Maybe you are looking for