How to handle Integrated Configuration performance impact on AAE/Java AS

Hi there,
Recently I have moved a configuration scenario from standard flow involving both ABAP and Java stacks, to Integrated Configuration usage. Undoubtedly, this will increase the load on AAE/Java stack. However, do you have link to some clear (official - even better) guidelines - what configurational changes should be done on Java side in order to handle the performance impact of such transition?
Best Regards,
Lalo

Hi Lalo,
In fact, using AAE generates no traffic in ABAP stack at all (it is ommited when processing a message), while the traffic in Java stack should be lower than for normal scenario. The performance should be noticeably better, thanks to smaller number of persistence steps and no costly HTTP connections between stacks. For more details, please refer to this document:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2016a0b1-1780-2b10-97bd-be3ac62214c7
Important quotation from this document:
Since the Integration Engine is bypassed for local message processing in the AAE, the resource consumption both in memory and CPU is lower. This leads to higher message throughput, and faster response times which especially is important for synchronous scenarios.
Moreover, have a look at this document, especially its beginning, for details about the architecture of AAE processing:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b
Hope this helps,
Greg

Similar Messages

How to test integrated configuration?

Hi,
I've set up an Integrated Configuration.(ICO)
I know i cannot test from Tools >> Test Configuration
I'm testing from RWB, i suppose i have to put my xml using the adapter engine test message option instead of the integration engine test option. You think that is correct?
Whatever i do i still get an error message saying there is no receiver determination for the given business component and interface. I thought for ICO you dont need Receiver Determination? Am i wrong?
Are there other/better ways to test this ICO?
Thx
Robert

Hi,
Small recap of the issue: i want to test an Integrated Configuration from the RWB.
My scenario is File to SOAP (synchronous)
All cache refreshes both in SXI_Cache and CPA cache were good.
If i test from RWB >> INtegration Engine >> Test Message then i get the following return:
".... Error While Sending Message: Error stack from response: No receiver could be determined...."
(this response is understandable: ICO is not on the IE and the combination of Sender Component/INterface/Namespace will not be found there, so we get an error)
But...
If I test from RWB >> Adapter Engine >> Test Message with these details:
Sender Component = Sender Comm Component from ICO
Interface = Sender Interface from ICO
Namespace = Sender Namespace from ICO
User/Passw are good
QoS: Best Effort
XML = good
then i get the following result:
"....Error While Sending Message: Additional error text from response: com.sap.engine.interfaces.messaging.api.exception.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=TEST_ICO;TS=;AN=SIOS_ICO_ReadCustomer;ANS=urn:vitens:isu:installation:create; in the current context [Unknown]. ......"
receiver agreement?
So i wonder if it is possible at all to test the ICO from the RWB?
Any comments are helpful.
Also i'm wondering if there could be installation settings wrong for AAE (we're on PI 7.11)
Or maybe there are settings in the Service Interface i should do differently?
Kr
Robert

How to handle spaces when calling javaw.exe or java.exe

Hi guys, I'm in the process of releasing my application.
My application need to make this system call on Windows.
C:\Program Files\MySoftware\javaw.exe -jar C:\Program Files\MySoftware\myJar.jar C:\Program Files\MyDocs\MyArgumentFile
this 'Program Files' for after the javaw.exe call: C:\Program Files\MySoftware\myJar.jar causes a problem because javaw.exe consider C:\Program as it's first argument and thus crash.
I wonder what to do with this. I don't want to change it to C:\MySoftware since it looks unprofessional.
A cup of Java, cheers

yawmark wrote:
I wonder what to do with this.Quotation marks.
~Right, every shell I can think of allows you to use quotation marks around a set of any characters that you want to be treated as one token. Note that this feature is a function of the shell you're using, not necessarily the system API. Also, many shells treat single quotes and double quotes differently, though they usually both accomplish the purpose of grouping what they contain into a single token.

Performance impact using nested tables and object

Hi,
Iam using oracle 11g.
While creating a package, iam using lot of nested tables created based on objects which will be passed between multiple functions in the package..
Will it have any performance impact since all the data is stored in the memory.
How can i measure the performance impact when the data grows ?
Regards,
Oracle User
Edited by: user9080289 on Jun 30, 2011 6:07 AM
Edited by: user9080289 on Jun 30, 2011 6:42 AM

user9080289 wrote:
While creating a package, iam using lot of nested tables created based on objects which will be passed between multiple functions in the package.. Not the best of ideas in general, in PL/SQL. This is not client code that can lay sole claim to most of the memory. It is server code and one of many server processes that need to share the available resources. So capitalism is fine on a client, but you need socialism on the server? {noformat} ;-) {noformat}
Will it have any performance impact since all the data is stored in the memory.Interestingly yes. Usually crunching data in memory is better. In this case it may not be so. The memory used is the most expensive memory Oracle can use - the PGA. Private process memory. This means each process copy running that code, will need lots of memory.
If you're not passing the data structures by reference, it means even bigger demands on memory as the data structure needs to be copied into the call stack and duplicated.
The worse case scenario is that such code consumes so much free server memory, and make such huge demands on having that in pysical memory, it trashes memory management as the swap daemons are unable to keep up with the demand of swapping virtual memory pages into and out of memory. Most CPU time is spend by the swap daemons.
I have seen servers crash due to this. I have seen a single PL/SQL process causing this.
How can i measure the performance impact when the data grows ?Well, you need to look at the impact of your code on PGA memory. It is not SQL performance or I/O performance that is a factor - just how much private process memory your code needs in order to execute.

Help to asses the performance impact of OAS and WLS integration.

If this is not the right forum, please direct me to the right one for the below clariafication.
We have developed a small application using ADF technology and this application can be integrated with the existing EBS R12 application. So, the EBS R12 application will be running in Oracle Application Server and ADF application will be running in WebLogic Server. And the customer who is implementing this, would like to know the below impacts before they start to implement.
1) Oracle Application Server to Web Logic Server (WLS) Connection happens to view the ADF application, What would be Resource Consumption of WLS to handle this ADF application. They would like to know the WLS resource used by this ADF application.
2) How does the Network/Data Traffic impact the Utilization of Web Logic Server and Oracle Application Server.
Could you please help us in providing the feedback to the customer.
Ans Is there a way to do load testing in our internal development instance to asses the resource consumption, cpu usuage and the network traffic?
Thanks,
Sugumar.

Could some one help us?

How to handle additional files.

Hi,
In PI we can pick up additional files in the Sender File Adapter.
My scenario would require to pick up invoice1.txt and and invoice1.jpg (the .jpg is the additional file)
I need to get FCC for .txt file, map it, and send it out to R3 with a proxy.
The additional file should go to a share (also on the R3, and then be accessible via a link)
Is this possible?
What configuration is needed to separate the .txt from the .jpg? Would it require BPM?
Any useful pointers/documents on the subject would be appreciated
kr
Robert

Hi,
I know how to configure the sender file adapter to pick up the additional file.
What i am looking for is how to handle it inside the integration engine, because i need to split the message from the additional file.
As mentioned above i need to send the .txt file via proxy to R3 and the .jpg file as is to R3, but it needs to go a share on the R3 directory.
file.txt + file.jpg --> Sender File Adapter --> PI / --> Proxy --> records form the file.txt
\ --> Receiver File Adapter --> .jpg
Thx
Robert

Integrated Configuration - AAE - Monitoring

Hello All
I am trying to understand how Integrated Configuration works in the runtime and things look rather neat to me with my scenario working.
But monitoring this in the RWB, few questions cropped up, which I hope someone can help answer:
1. Inbound and Outbound Payload Monitoring
When message get processed within the Integration Engine, we can see the input payload and also the output of the mapping. In the case of the Integrated Configuration, is this not possible? I don't see any new special window open and hence how is the monitoring of the various steps specifically input and output done?
2. Mapping Trace not accessible
To further analyze what is new, we put a few standard XI trace steps into the mapping to see where these traces are displayed in the runtime. We thought it would be a part of the Audit Log, but it is not. Has anyone experience with how trace (custom mapping trace using the AbstractTrace object ) can be used with Integrated Configuration or is that another limitation with PI 7.1 and the Integrated Configuration?
To me these two are major requirements as a application developer to do my development and support and hence am wondering whether to gain performance have these options been eliminated or is there some set up needed on the server which we have missed.
Thoughts , ideas welcome.
Regards
Bhavesh
PS : You know what my questions to the Subject Matter Experts at the Bangalore teched are going to be

Hello Rodrigo,
Regarding monitoring of different versions of the message processed by means of AAE, this is unfortunately not possible in PI 7.1x - message is persisted only once in such scenarios (after receiver/interface determination). Multiple persistence of the processed message in Java stack is only available in 7.3x - there you have options for configurable staging (property xiadapter.stage.conf of J2EE service XPI Adapter: XI) and logging (property xiadapter.logger.conf of J2EE service XPI Adapter: XI) of the message so that several versions of the message (e.g. before mapping and after mapping) can be observed (incl. these versions' payloads). Technically, it is possible to setup staging/logging for different processing steps (namely stages - analogue of pipeline services in classical Integration Engine processing) - but, as I said, in 7.3x and not in 7.1x.
Speaking about creation of custom audit log entries, did you check SAP standard AuditMessageKey and AuditAccess for this? (http://help.sap.com/saphelp_nwpi711/helpdata/en/3b/6fe540b1278631e10000000a1550b0/frameset.htm)
Regards,
Vadim

Performance Impact When Using SNC Communication

Hello,
Does anybody know if and how much performance impact there is if we use SNC for communication between the SAP Server and SAPGUI?
I think there are two areas that may be impacted; Network and server CPU.
For network load, I did find a part in "Front-End Network Requirements for SAP Business Solutions" document saying "overhead of roughly 350 bytes per user interaction step" but it does not specify the type of encryption. I wonder if there is any other info on this?
For CPU impact, how much overhead should I consider for sapgui access?
I see no field for this in the quicksizer and I can't seem to find any white papers on this subject.
Thank you in advance.

>
Peter Adams wrote:
> Ken,
>
> if you plan to use SAPcryptlib for SNC between SAP servers, then you should use a SAPcryptolib-compatible solution for the SNC communication between SAPGUI and SAP server, and there is only one vendor who can provide this. Let me know, if you need help finding it. My contact information is in my SDN business card.
Just so Kan is clear - It is not legal to use the SAP cryptolib provided by SAP for SNC between SAP GUI and SAP servers, so if x.509 is the desired mechanism you need to purchase additional software from the company which Peter works for to provide SAP GUI SNC-based SSO. I think instead, Kan might be using the free SAP supplied SNC Kerberos library, which is why I asked him to confirm this in my last post. I doubt he is interested to buy any third party software.
> As to the performance discussion: first of all, yes, there will be a small performance impact if SNC is used (no matter which type or implementation), but from our experience with many actual SNC implementations, I can state that this is practically not relevant. It is not noticeable by users. There were never any performance discussions with customers. See also SAP Note 1043694.
I agree with this - the performance impact is not noticed by users, but the system managers who look after the servers where SAP is installed, and the team responsible for the network need to be aware of any differences (if any) when SNC is turned on and when SNC is turned off. I think this is why Kan is asking these questions, not because he is concerned about users noticing any difference when they logon to SAP.
> Just a first quick comment on certain statements above: Tim's arguments for proving his overall statement are not conclusive from my perspective. Nor do I think his overall statement itself is correct.
The facts I mentioned are well known facts, e.g. symmetric crypto is far better from performance point of view than asymmetric. I know the examples I have shown which I found when doing a quick google search were not conclusive, but they were shown as initial examples, not necessarily the best examples. This is why I specifically mentioned that if you search in google yourself you will see many more references where comparisons are done between Kerberos (e.g. symmatric) compared with PKI (e.g. asymmetric).
> First of all, he only selects one aspect of performance - CPU impact of encryption algorithms.
No, I didn't. Some of the examples I referred to also discuss other differences. I also mentioend other differences such as memory and what protection level is used when configuring SNC.
> But for a true comparison, you'd have to look at all relevant aspects (latency, network overhead, ...).
Yes, I agree. No doubts here.
>Network performance overhead is usuallly worse with Kerberos than with PKI.
This is not true. When SAP is using SNC, the GSS-API standard is used and so the only network communication involves SAP software sending a standard GSS token from the workstation to the SAP server, and this GSS token is often about the same size, regardless of which mechanism is used, so any network performance differences are not related to the mechanism, but more related to the complexity of the cryptography used on each end (mostly on the server side).
>Second, you need to look at the specific usage scenario. For example, the first report referenced by Tim is an analysis about different Token Profile mechanism for WS Security, for one specific implementation. This does not allow to draw any conclusion for the SNC use case in general, and for sure not for a specific implemenation. It does not take the overhead for the encryption of the message content into account. Third, Tim associates PKI exclusively with asymmetric encryption. Yes, it is well known that asymmetric algorithms are slower than symmetric ones, but it is also well known that the encryption of the message content (by far the majority of the data) happens with symmetric encryption algorithms in the PKI scenario. With PKI-based SNC, you can even select a symmetric algorithm and use a more performant one that the ones that Kerberos prescribes.
Kerberos works with many different symmetric algorithms as well, so mentioning that the alg is selectable is not relavent to any comparison.
> To summarize, I will try and collect facts that will support the opposite point of view. From our practical experience, the performance overhead is not relevant, and criteria like consistency with SAPcryptolib, strength of security, ease of administration, choice of authentication and encryption mechanism, etc. are much more important.
>
> Peter

How to make integrated weblogic server use log4j

Hi all,
I use Jdeveloper 11.1.1.6, WL 10.3 on Win7. JDK 1.6.0.3x64
I tried to configure for 1 day during according to guides and informations on net. But i can not make it works unfortunately. Just after i start wls, encountered this:
<14-12-2012 10:42:00 o'clock EET> <Error> <Log Management> <BEA-170022> <Log4j failed to initialize for DefaultServer. The default JDK Logging implementation will be used.
java.lang.ClassNotFoundException: weblogic.logging.log4j.JDKLog4jAdapterFactory
     at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
     Truncated. see log file for complete stacktrace
>
I followed up basically through those links log4j Configuration in Standalone Weblogic Server - ADF and http://docs.oracle.com/cd/E15051_01/wls/docs103/logging/config_logs.html#using_log4j
I changed Logging implementation as Log4j from JDK: http://www.2hotfile.com/image.php?di=72YU
I created log4j.xml file under my %DOMAINHOME%\config : http://www.2hotfile.com/image.php?di=JHLI
<?xml version="1.0" encoding="UTF-8" ?><!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration>
<appender name="CONSOLE" class="org.apache.log4j.ConsoleAppender">
<param name="Threshold" value="INFO"/>
<layout class="org.apache.log4j.PatternLayout">
<param name="ConversionPattern"
value="%d{ABSOLUTE} %-5p [%c{1}] %m%n"/>
</layout>
</appender>
<appender name="FILE" class="org.apache.log4j.DailyRollingFileAppender">
<param name="File" value="/log/daily.log"/>
<param name="Append" value="false"/>

<param name="DatePattern" value="'.'yyyy-MM-dd"/>
<layout class="org.apache.log4j.PatternLayout">
<param name="ConversionPattern" value="%d %-5p [%c] %m%n"/>
</layout>
</appender>
<logger name="org.apache">
<level value="WARN"/>
</logger>
<root>
<level value="DEBUG"/>
<appender-ref ref="FILE"/>

</root>
</log4j:configuration>
i copied log4j.jar, wllog.jar into my %DOMAINHOME%\lib : http://www.2hotfile.com/image.php?di=BYB3
Even i copied commons-logging-1.0.4.jar and com.bea.core.weblogic.commons.logging_1.4.0.0.jar files into the lib folder and then i set CLASSPATH accordingly, result was negative.
I added these lines into startWeblogic.cmd
@REM customized here for log4j
set LOG4J_CONFIG_FILE=%DOMAIN_HOME%\config\log4j.xml
set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.log.Log4jLoggingEnabled=true -Dlog4j.debug -Dlog4j.configuration=%LOG4J_CONFIG_FILE%
set SAVE_CLASSPATH=%CLASSPATH%;%DOMAIN_HOME%\config;
Additionally, i have tried adding log4j.jar into sysyem classpath becuse of classloading problem suspicion: http://www.2hotfile.com/image.php?di=7Y3N after view this link http://www.coderanch.com/t/479763/BEA-Weblogic/Log-Weblogic-ClassNotFoundException
Thanks in advance...
Edited by: webyildirim on 14.Ara.2012 02:45

I resolved the exception; Jdeveloper 11.1.1.4 was setted up on my pc as well. That was the cause of problem. System was looking some paths on 11.1.1.4 server folders that belong to 11.1.14 version.
Now, created server log which i defined in log4j.xml but no log line found in file, nothing logged according to log4j.xml config file and wls still writes its own log into its own log file which is under $domain_home$\servers\DefaultServer\logs\DefaultServer.log. What might be the reason?
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/"
debug="true">

<appender name="FILE" class="org.apache.log4j.DailyRollingFileAppender">
<param name="File" value="./server.log"/>
<param name="Append" value="false"/>

<param name="DatePattern" value="'.'yyyy-MM-dd"/>

<layout class="org.apache.log4j.PatternLayout">

<param name="ConversionPattern" value="%d %-5p [%c] %m%n"/>

</layout>
</appender>
<appender name="CONSOLE" class="org.apache.log4j.ConsoleAppender">
<param name="Target" value="System.out"/>
<param name="Threshold" value="INFO"/>
<layout class="org.apache.log4j.PatternLayout">

<param name="ConversionPattern" value="%d{ABSOLUTE} %-5p [%c{1}] %m%n"/>
</layout>
</appender>
<category name="org.apache">
<priority value="DEBUG"/>
</category>
<category name="com.weblogic">
<priority value="DEBUG"/>
</category>
<category name="com.roketsan">
<priority value="DEBUG"/>
</category>
<category name="org.hibernate">
<priority value="DEBUG"/>
</category>
<category name="log4j.category.org.hibernate">
<priority value="DEBUG"/>
</category>
<category name="log4j.category.org.hibernate.SQL">
<priority value="STDOUT"/>
</category>
<root>
<appender-ref ref="CONSOLE"/>
<appender-ref ref="FILE"/>
</root>
</log4j:configuration>
jdeveloper integrated weblogic console output: http://www.2hotfile.com/image.php?di=TPY2
*** Using port 7101 ***
C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
this is suuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuun
'LOG4J_CONFIG_FILE' i‡ ya da dis komut, ‡alistirilabilir
program ya da toplu is dosyasi olarak taninmiyor.
JAVA Memory arguments: -Xms256m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK16~1.0_3\lib\tools.jar;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1.6\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1.6\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1.6\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\wcps-lib\derby-10.6.1.0.jar;C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\wcps-lib\derbytools-10.6.1.0.jar;C:\Oracle\Middleware_11.1.1.6\jdeveloper\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-api.jar;C:\Oracle\Middleware_11.1.1.6\jdeveloper\webcenter\modules\wcps_11.1.1.6.0\wcps-connection-mbeans.jar;C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\xqrl.jar;.
PATH=C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1.6\modules\ORGAPA~1.1\bin;C:\PROGRA~1\Java\JDK16~1.0_3\jre\bin;C:\PROGRA~1\Java\JDK16~1.0_3\bin;C:\Program Files\Java\jre6X64;C:\Program Files\Java\jre6X64\bin;C:\Oracle\database\app\oracle\product\11.2.0\server\bin;C:\Oracle\database\app\oracle\product\11.2.0\server;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\WIDCOMM\Bluetooth Software\;C:\Program Files\WIDCOMM\Bluetooth Software\syswow64;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\Dell\Dell Wireless WLAN Card;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files\TortoiseSVN\bin;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\OpenVPN\bin;C:\Users\Dijitaluser\Desktop\Yeni klas”r\commons-logging-1.0.4.jar;;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_30"
Java(TM) SE Runtime Environment (build 1.6.0_30-b12)
Java HotSpot(TM) 64-Bit Server VM (build 20.5-b03, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_3\bin\java -client -Xms256m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\weblogic.policy -agentlib:jdwp=transport=dt_socket,server=y,address=52130 -Djavax.net.ssl.trustStore=C:\Oracle\Middleware_11.1.1.6\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1.6\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1.6\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\oracle\store\gmds -DUSE_JAAS=false -Djps.policystore.hybrid.mode=false -Djps.combiner.optimize.lazyeval=true -Djps.combiner.optimize=true -Djps.auth=ACC -Doracle.core.ojdl.logging.usercontextprovider=oracle.core.ojdl.logging.impl.UserContextImpl -noverify -Doracle.webcenter.analytics.disable-native-partitioning=false -Doracle.webcenter.tagging.scopeTags=false -XX:+UseParallelGC -XX:+DisableExplicitGC -Dportlet.oracle.home=C:\Oracle\Middleware_11.1.1.6\jdeveloper -Dwc.oracle.home=C:\Oracle\Middleware_11.1.1.6\jdeveloper -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\sysext_manifest_classpath -Dlog4j.ignoreTCL=true -Dweblogic.log.Log4jLoggingEnabled=true -Dlog4j.debug weblogic.Server
Listening for transport dt_socket at address: 52130
Debugger connected to local process.
<18-Dec-2012 13:58:09 o'clock EET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<18-Dec-2012 13:58:10 o'clock EET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<18-Dec-2012 13:58:10 o'clock EET> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\com.bea.core.weblogic.commons.logging_1.4.0.0.jar;C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\commons-logging-1.0.4.jar;C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\log4j-1.2.15.jar;C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\mbeantypes\csp-id-asserter.jar;C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\mbeantypes\jps-wls-trustprovider.jar;C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\wllog4j.jar>
<18-Dec-2012 13:58:10 o'clock EET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.5-b03 from Sun Microsystems Inc.>
<18-Dec-2012 13:58:11 o'clock EET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<18-Dec-2012 13:58:12 o'clock EET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<18-Dec-2012 13:58:12 o'clock EET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<18-Dec-2012 13:58:12 o'clock EET> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<18-Dec-2012 13:58:12 o'clock EET> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00016. Log messages will continue to be logged in C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<18-12-2012 13:58:12 o'clock EET> <Notice> <Log Management> <WL-170019> <The server log file C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
log4j: Trying to find [log4j.xml] using context classloader java.net.URLClassLoader@7df44ec7.
log4j: Using URL [file:/C:/Users/Dijitaluser/AppData/Roaming/JDeveloper/system11.1.1.6.38.61.92/DefaultDomain/log4j.xml] for automatic log4j configuration.
log4j: Preferred configurator class: org.apache.log4j.xml.DOMConfigurator
log4j: System property is :null
log4j: Standard DocumentBuilderFactory search succeded.
log4j: DocumentBuilderFactory is: weblogic.xml.jaxp.RegistryDocumentBuilderFactory
log4j: debug attribute= "true".
log4j: reset attribute= "false".
log4j: Threshold ="null".
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [org.apache] additivity to [true].
log4j: Level value for org.apache is [DEBUG].
log4j: org.apache level set to DEBUG
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [com.weblogic] additivity to [true].
log4j: Level value for com.weblogic is [DEBUG].
log4j: com.weblogic level set to DEBUG
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [com.roketsan] additivity to [true].
log4j: Level value for com.roketsan is [DEBUG].
log4j: com.roketsan level set to DEBUG
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [org.hibernate] additivity to [true].
log4j: Level value for org.hibernate is [DEBUG].
log4j: org.hibernate level set to DEBUG
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [log4j.category.org.hibernate] additivity to [true].
log4j: Level value for log4j.category.org.hibernate is [DEBUG].
log4j: log4j.category.org.hibernate level set to DEBUG
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [log4j.category.org.hibernate.SQL] additivity to [true].
log4j: Level value for log4j.category.org.hibernate.SQL is [STDOUT].
log4j: log4j.category.org.hibernate.SQL level set to DEBUG
log4j: Class name: [org.apache.log4j.ConsoleAppender]
log4j: Setting property [target] to [System.out].
log4j: Setting property [threshold] to [INFO].
log4j: Parsing layout of class: "org.apache.log4j.PatternLayout"
log4j: Setting property [conversionPattern] to [%d{ABSOLUTE} %-5p [%c{1}] %m%n].
log4j: Adding appender named [CONSOLE] to category [root].
log4j: Class name: [org.apache.log4j.DailyRollingFileAppender]
log4j: Setting property [file] to [./server.log].
log4j: Setting property [append] to [false].
log4j: Setting property [datePattern] to ['.'yyyy-MM-dd].
log4j: Parsing layout of class: "org.apache.log4j.PatternLayout"
log4j: Setting property [conversionPattern] to [%d %-5p [%c] %m%n].
log4j: setFile called: ./server.log, false
log4j: setFile ended
log4j: Appender [FILE] to be rolled at midnight.
log4j: Adding appender named [FILE] to category [root].
<18-12-2012 13:58:12 o'clock EET> <Warning> <NodeManager> <WL-300043> <Node manager native library not found - server process id not saved.>
<18-12-2012 13:58:13 o'clock EET> <Error> <Socket> <WL-000438> <Unable to load performance pack. Using Java I/O instead. Please ensure that wlntio.dll is in: 'C:\PROGRA~1\Java\JDK16~1.0_3\bin;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1.6\modules\ORGAPA~1.1\bin;C:\PROGRA~1\Java\JDK16~1.0_3\jre\bin;C:\PROGRA~1\Java\JDK16~1.0_3\bin;C:\Program Files\Java\jre6X64;C:\Program Files\Java\jre6X64\bin;C:\Oracle\database\app\oracle\product\11.2.0\server\bin;C:\Oracle\database\app\oracle\product\11.2.0\server;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\WIDCOMM\Bluetooth Software\;C:\Program Files\WIDCOMM\Bluetooth Software\syswow64;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\Dell\Dell Wireless WLAN Card;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files\TortoiseSVN\bin;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\OpenVPN\bin;C:\Users\Dijitaluser\Desktop\Yeni klasör\commons-logging-1.0.4.jar;;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\native\win\32\oci920_8;.'
>
<18-12-2012 13:58:19 o'clock EET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<18-12-2012 13:58:20 o'clock EET> <Warning> <Store> <WL-280101> <The persistent file store "_WLS_DefaultServer" is forced to use buffered I/O and so may have significantly degraded performance. Either the OS/hardware environment does not support the chosen write policy or the native wlfileio library is missing. See store open log messages for the requested and final write policies. See the documentation on store synchronous write policy configuration for advice.>
<18-Dec-2012 13:58:20 o'clock EET> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<18-Dec-2012 13:58:20 o'clock EET> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\access.log00001. Log messages will continue to be logged in C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\access.log.>
<18-12-2012 13:58:23 o'clock EET> <Notice> <StdErr> <BEA-000000> <java.util.logging.ErrorManager: 0: oracle.core.ojdl.weblogic.DomainLogHandler ERROR: unable to find instance of weblogic.logging.DomainLogBroadcastHandler>
<18-12-2012 13:58:25 o'clock EET> <Notice> <WebLogicServer> <WL-000365> <Server state changed to STANDBY>
<18-12-2012 13:58:25 o'clock EET> <Notice> <WebLogicServer> <WL-000365> <Server state changed to STARTING>
<18-12-2012 13:58:29 o'clock EET> <Warning> <J2EE> <WL-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application Roketsan is not versioned.>
<18-Dec-2012 13:58:37 o'clock EET> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<18-Dec-2012 13:58:37 o'clock EET> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00016. Log messages will continue to be logged in C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<18-12-2012 13:58:37 o'clock EET> <Notice> <Log Management> <WL-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<18-12-2012 13:58:37 o'clock EET> <Notice> <WebLogicServer> <WL-000365> <Server state changed to ADMIN>
<18-12-2012 13:58:37 o'clock EET> <Notice> <WebLogicServer> <WL-000365> <Server state changed to RESUMING>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[11]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Warning> <Server> <WL-002611> <Hostname "AD190", maps to multiple IP addresses: 169.254.50.94, 192.168.26.212, fe80:0:0:0:a1be:61f:f156:325e%38>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:a1be:61f:f156:325e:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[10]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:a9fe:325e:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[7]" is now listening on fe80:0:0:0:a0d0:352d:6b23:d7dc:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[8]" is now listening on fe80:0:0:0:648c:26dc:32a5:1300:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:c0a8:1ad4:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:34a0:7762:7e2f:fca8:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[9]" is now listening on fe80:0:0:0:0:100:7f:fffe:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default" is now listening on 192.168.26.212:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[2]" is now listening on 169.254.50.94:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[6]" is now listening on fe80:0:0:0:fdaf:7651:30df:acb6:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <WebLogicServer> <WL-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<18-12-2012 13:58:38 o'clock EET> <Notice> <WebLogicServer> <WL-000365> <Server state changed to RUNNING>
<18-12-2012 13:58:38 o'clock EET> <Notice> <WebLogicServer> <WL-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 30110 ms.
IntegratedWebLogicServer started.
Edited by: webyildirim on 18.Ara.2012 04:17

How to handle Queue blockage due to application error in BPM

Hi
In the integration process that i have created, there is a SyncSend(calling a webservice using SOAP adapter) Step.
Sometimes the response message from the receiver application may be a Fault message.
Whenever a fault message is sent back to integration process in XI, the message fails and the queue is blocked.
Bacause of this queue blockage , the next messages to be processed are getting blocked.
How to handle this?
Thanks
Ram

do you have configured the fault message mapping in the Operation Mapping? what error does the sxi_monitor display?

How to handle rules and activities in AII

Hi experts,
How to handle rules and activities in AII. Is there any transaction code for it. please give some information, it will be hepful for me

In IMG go to Conditions & Rules to configure the relevant rules.
Rules in AII represent business process you intend to RFID enable. Each rule is made up of multiple activities that defines exactly how a particular rule functions.
SAP delivers standard rules & activities for standard scenarios of Pack, Load etc. processes.
For more information on AII rules and activities refer to the performance assistant available in IMG or read more at the link below:
http://help.sap.com/saphelp_autoid40/helpdata/en/index.htm
Hope this helps.
-Ashish

How to handle if we need to re-load/replenish component after one SFC START

Hi Experts,
I am trying TBCT(Time Based Component Tracebility) function and would like to ask a question.
For example,
    1. Resource's SLOT_QTY_DECREMENT at POST_START.
    2. Material MAT_01, lot_size = 2
    3. BOM BOM_01, assemble time based component COM_01 at Operation OPR_01, assembleQty =1
    4. I modeling one slot configuration and set COM_01 at SLOT S1.
    5. I load/replenish COM_01's inventory INV_01 into S1 and Slot_qty =1
    6. When I Start one SFC SFC_01(POD), it will consume Slot's qty 1 and now Slot S1 is empty.
    7. Because SFC_01 need to consume COM_01 2 qty, so SFC_01 still need last 1 qty.
    8. I load/replenish COM_01's into S1 and slot_qty = 5
The Question is
    a. When I Compelete the SFC_01, ME will also consume the last 1 qty automcatically? Because I set Resource's SLOT_QTY_DECREMENT at POST_START.
    b. When SFC_01 status is Active (After Start), any function can do consume the last 1 qty manually?
    c. If not, I don't know how to handle if we need to re-load/replenish component after one SFC is already START.
Hope someone can help me.... thanks!

Cary
The purpose of the hook is just to decrement the inventory in the slot. Timebased component traceability will report the total quantity required by the BOM was consumed. You can see this if you start and SFC, then replenish it whilst it is active. The as-built report will show both inventory records were consumed, and twice as much quantity as was required in the BOM.
If you perform multiple replenishments, after the SFC is started and before it is complete, then the system just reports them all. In essence, it does not know which exact inventory IDs were consumed for this particular SFC. It's a limitation of timebased, and it's safer to over-report that the SFC may have used an inventory ID as not.

CCMS implementation performance impact

Dears
I'm looking for information on the impact on performance of a CCMS implementation.
Impact on Solution Manager, impact on managed SAP systems. I opened a customer message but SAP comes back with there is no sizing documentation for ccms.
The purpose is to add a lot of managed SAP system into SAP Solution Manager and enable CCMS + IT Performance Reporting. I would like to know how much impact the RFC access causes.
If anyone has done a study on this or has information on this please share.
Kind regards
Tom

@Mauricio Yes I do understand the principal behind it. From a logical point of view it should improve performance but then again tests should have been run to prove the point.
For example: I'm involved in the pilot program for SAPJVM 4.1 and while SAP sais the performance should be the same or better but we all know SAP doesn't have every combination of OSDBSAP system running. It's the same principal, from a logical point of view it should be the same or better but one should do some performance tests to verify if it's the case.
@Augusto No problem on the misunderstanding, it shows my question wasn't that great and I should have provided more information
The point is that we have a lot of managed SAP systems to add and apparently SAP doesn't have that many customers that have a big number of managed SAP systems in the Solution Manager. The performance impact of CCMS implementation is neglictible if you only have some managed SAP systems. What is a 3% CPU rise in that case, shouldn't be a problem but now imagine you put in thirty times as much SAP systems then it can be become a problem if you don't foresee additional server resources.
A lot of those scenario's seem to have been tested with only a few managed SAP systems, doing a full landscape fetch through transaction SMSY takes a long time for example. I do know in Solution Manager 7.1 there is another component in between the SLD and SMSY which can synchronize content faster to avoid long runtime.
Another example was the landscape verification tool 1.0 which I reviewed in a blog. It didn't have a possibility to refresh single systems (I haven't checked latest version) but that is a problem if you have many managed SAP systems and you want to just check one. In the video demo's it flashes and it's very fast because there are only five managed SAP systems.
I'm looking forward to Solution Manager 7.1 but these kind of performance impacts should be known really. Doing a small implementation is no problem but customers are really interested in application lifecycle management and so on and are starting to generate demand for a lot of different scenario's. Sizing it is not that hard in small environment but once the environments become larger and a lot of managed SAP systems are involved the issue I see with CCMS for example rises and it becomes very hard to size properly. Perhaps it could be integrated into the quick sizer (number of managed SAP systems and enablement/use of certain scenarios).
I do know for some scenarios there is sizing documentation available, diagnostics being one of those.

ECM integration with Performance Management

I am trying to integrate the Appraisals with ECM. The required configuration is done in SPRO. The problem which I face is that the number assigned to the appraisal template is different in the development box and in the quality box. I tried to configure external number range for appraisal template but the system still automatically asigns the internal number.
Has any one of you successfully done the ECM integration with Performance Manageemnt? How did you go about the different number issue?

Could not get the number range working. Transported the templates instead.

Active Table Logging T000 performance impact

Hi fellow SAP experts,
I need some advice on system performance impact when switching on Table Logging for T000 - configuration in production please?
We have decided to turn on Table Logging for auditing purposes, only allowing developer config in production following a volume of evidence being supplied.
I need to know how much this activation is going to impact the performance of the companies production environments, how much storage, memory, performance, etc. this function is going to consume and how much of the above consumables I need to cater for now and in the future?
We have a Dual Track environment, BAU want to switch on Table Logging for fix on fail, I want to swich it on for Project deliveries.
Please advise, with referencing if possible?
Thank you kindly
Paul

Hi Paul,
There has been a constant debate whether table logging affects the System performance, especially in Produciton environment. Please see my comments below :
1) To turn on logging for table T000, you will have to activate the parameter rec/client, with values for one client or all the clients in the System depending on your requirement.
2) This parameter setting will not only log changes to T000, but also for over 28000 tables.
3) But these are customizing tables which usually contain a relatively small amount of data which is changed occasionally.
4) After activating, if you suddenly find performance issues, you can check which tables are causing issues via transaction SCU3.
5) You can go to transaction SE13 and deactivate logging for a table, if you find too many entries for any particular table in SCU3.
So, logging tables doesn't necessarily impact performance. Hope this helps. Please refer to SAP Note-608835 related to this.
Best Regards,
Savitha

How to handle Integrated Configuration performance impact on AAE/Java AS

Similar Messages

Maybe you are looking for