Integrated Configuration- Problem occurred in receiver agreement for sender
Hi , I am using AAE in PI 7.1 and it is proxy to file scenrios.
When Ia m doing testing in Integration Directory in test configuration its giving me this error .
Problem occurred in receiver agreement for sender -<ECCBUSINESSSYSTEM> to receiver -BS_D_EPS,http://abc.com/sap/pi/HR/Qualifications.Qualifications_Async_Out: No receiver agreement found for , -<ECCBUSINESSSYSTEM> , BS_D_EPS, http://abc.com/sap/pi/HR/Qualifications, Qualifications_Async_Out
( here it should take interface Qualifications_Async_In, but logs says it is pointing to outbound interface)
here when I am going in to trace logs then it seems that are not able to understand the receiver interface . rather then it is taking sender inface in logs..
In trace logs . I am getting
Receiver Determination
<Not found>
<Trace level="1" type="B">CL_RD_PLSRV-ENTER_PLSRV</Trace>
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
<Trace level="2" type="T">Start with given receiver - BS_D_EPS </Trace>
<Trace level="2" type="T">Using Receiver Determination 00000000000000000000000000000000 </Trace>
<Trace level="1" type="T">No Relation found - accept given Receivers. </Trace>
<Trace level="2" type="T">...extracting Receiver from Header: BS_D_EPS </Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules. </Trace>
<Trace level="3" type="T">...create rule engine </Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0 </Trace>
<Trace level="2" type="T">Number of Receivers:1 </Trace>
<Trace level="1" type="E">CL_RD_PLSRV-ENTER_PLSRV</Trace>
Interface Determination
<Not found>
<Trace level="1" type="B">CL_ID_PLSRV-ENTER_PLSRV</Trace>
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
<Trace level="1" type="T">...There is no Interface Determination configured for receiver party and receiver service BS_D_EPS </Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) BS_D_EPS Qualifications_Async_Out </Trace>
<Trace level="2" type="T">...valid InbIf without Condition: Qualifications_Async_Out </Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1 </Trace>
<Trace level="1" type="E">CL_ID_PLSRV-ENTER_PLSRV</Trace>
Operation Mapping
<Not found>
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
<Trace level="2" type="T">......attachment XI_Context not found </Trace>
<Trace level="3" type="T">Mapping already defined in interface determination </Trace>
<Trace level="1" type="T">No mapping configured </Trace>
<Trace level="1" type="E">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
I have developed the other integrated configuration scenario and this is working fine .
please let me know how can I troubleshoot it
I am using sender as Soap and receiver as File adapter.
here the problem is that while going for interface deteremination and receiver agreement it is calling to Outbound interface .
It should call the inbound interface. I put all the details correctly and deleted all the objects and crated again for both Ir and Id..
I put the name of inbound interface in configuration but while executing its calling outbound interface.
Similar Messages
-
Problem when creating receiver agreement for File to IDOC scenario
I have done the following :
1. Created two business systems one for the file system and other for the R3 system and also I created two communication channel, one as sender communication channel and one as receiver communication channel.
2. Created the receiver determination
3. Created the interface determination
4. Created the sender agrement
5. Now when I was trying to create the receiver agreement I want to assign the receiver communication channel i have created to the receiver agreement but the F4 help gives me no records and I am thus stuck at this point.
Please suggest me how to proceed forward from here.Hi ,
<i>5. Now when I was trying to create the receiver agreement I want to assign the receiver communication channel i have created to the receiver agreement but the F4 help gives me no records and I am thus stuck at this point.</i>
Make sure that your created communication channel for reciever is under the respective reciever business system and give the same while creating the reciver agrement.
sekhar -
No receiver agreement for the sender "xyz" to receiver "abc" found
in SXMB_MONI i am getting the following error message when the data has been sent from the IDOC
No receiver agreement for the sender "xyz" to receiver "abc" found
I have specified 3 receiver agreements and a Default receiver (in configured receivers)
so in any case, it should pick it as the receiver
but, still I am getting the above error message
any one faced same kind of issue?
regards,
nikhil.Hi Nikhil,
Correct me if I understood it wrongly.
You need to copy the IDOC xml data and copy it for testing. XSD is the definition for your XML data.
You should not copy the XSD as the input to the Mapping program.
Follow this steps:
- Go to your Mapping Program
- Click on Test tab
- Click on the SRC tab and copy your XML data here not XSD.
Thanks
Srini
Thanks
Srini -
Hello,
Scenario:
Idoc from R/3 to XI and external partner LI.
The idoc has to be converted to xml and sent by email (Email is a Business Service in XI).
Question:
I got an error "no receiver found for sender" when sending the idoc to XI. In the soapheader of the message I see that the service of the receiver stays empty. How can I fill the service of the receiver in the soap header?
Thanks for your reactions,
Erik van LisdonkYou have to define a Receiver Determination for the Sender & Interface (sending SAP Business System plus IDoc interface) and specify the Receiver there. Furthermore, you will need an Interface Determination to determine the interface of the outgoing email and the mapping that is required to transform the IDoc to this interface.
Finally you will require a Receiver Agreement for the Service 'Email' that specifies the receiving communication Channel (in your case an Email Channel).
This is all well described in the SAP online help. As a starting point, you can have a look <a href="http://help.sap.com/saphelp_nw04/helpdata/en/19/8dba88b1db634f891622e909565f7a/frameset.htm">here.</a>
regards,
Peter -
Receiver Agreement for Integration Process
Dear All
I am facing a strange problem when I am sending a message via proxy to SAP PI whci is then supposed to forward it to a legacy system.
I am using a BPM and am getting an error like no receiver agreement found between the sender SAPECC system and receiver integration processHi,
>>>a BPM and am getting an error like no receiver agreement found between the sender SAPECC system and receiver integration process
use the integration directory wizard and create two configurations
- ECC - PI (integration process)
- PI (BPM) - to the legacy
then it will work - this is not an error but lack of configuration
Regards,
Michal Krawczyk -
Problem in creating Receiver Agreement using Integration Directory API
Hello Experts,
We are developing a scenario where we are creating "REceiver Agreement" through Integration Directory API.
This requires certain parameters like Sender component, Interface, Communication Channel & Namespace to be set in the code.The required Communication Channel & Components already exist in Integration Directory .
Our concern is that we are not able to retreive this Communication Channel's ID through the code in order to set it as a parameter for Receiver Agreement generation.
Can anybody pls advice??
Thanks in advance,
Suraj.Hi Stefan,
We tried using query on communication channel, but could not do it as we could not get a method which accepts name of communication channel as parameter.
We used "CommunicationChannelQueryIn" related methods in the API.
But still could not retreive the Communication Channel ID of an existing Communication Channel.
Please help. -
Missing receiver agreement for incoming IDoc
Hi guys,
I transfer IDoc's from a SAP-system to XI to start a ccBPM-process
For that I don't need a receiver agreement.
But why I get always the error message "<b>No receiver agreement found for sender -<SAP-SYSTEM> to receiver -<integration process>"</b> ?
For other IDoc which coming from the same system but starting another process everything is working fine!!!
I don't understand that.
Could somebody help me please? Thanks very much in advance.
Regards, ThomasHi,
please can you check in transaction SXI_CACHE if the return code for the IP is 0.
Also, for the Interface that are working is it the same scenario SAP to IP with IDocs on the Outbound?
Regards
Vijaya -
Problem in Creating Receiver Agreement
Hi,
I had created a namespace in IR and did a simple idoc to file scenario.
In the IR, the MI and MT are not been shown while creating the receiver agreement and receiver determination.
Do let me know what would have been wrong.
I tried entering it manually and it gave error like schema not recognized.
Regards
KrishHi,
when u r Doing Idoc to file scenario, sender side u have to use a ABAP business sysytem.
hope u have imported the same in configuration scenario.
in that u have to select u r MI. then onlly it will reflect in the Reciver Determination
Regards,
Madhav
Note: Points If Useful. -
Metadata integrator-configuration problem
hi..
i'm just exploring the meta data integrator. when i configure the cms with my login and the DI repo with the local repository. it says success. but when i run the job it says the following error..
[CrystalCrawlerMain]configuration <config_new> not valid
CMS Integrator failed: configuration <config_new> not valid
when i test it. it is successfull and the job is also successful.
help me in this pls
vigiSergey, many thanks for your help. I am still having some problems however.
For Data Services (BO XI3), I had to change the cmdConfig.cmd file and
set CE_JARS_DIR=E:\Program Files\Business Objects\common\4\java\lib. I also had to copy the load.jar to this directory.
I was then able to successfully run the setup which created the folder in the CMC.
When I run the metadata integrator program in the CMC, it runs through successfully. However when i look at the impact and lineage in the DI Mgmt console, I am not seeing any information on objects in my BO repository.
Not sure if I'm missing a step..any help would be appreciated
thanks -
Problem to define recipent type for Send mail option in WF
Dear All,
I am trying to create a send mail from WF.
but i am struggling to define recipent type as it shows following options
1. Organizational unit - we don not have org chart defined in our company
2. JOB - I think it is again with Org Chart
3. Position - it is again with org chart
4. work center - not applicable
5. user
when i define it it gives me error message with binding
Express
typid
addressstrings
are not defined in container
6. expression - i do not know how to use
7. Workflow initiator expression - I do not know how to use
Kindly help me to resolve this issue.
Best of Regards,
Gaurav SoodIf you choose the Recipient type is "E-Mail address", you can enter the email of the person manually to whom the email should be sent or you can still choose an expression (Container) which will have the value determined dynamically.
If you choose the Workflow Initiator, the notification goes automatically to the user who has started the workflow.
If User, you can enter the sap user id manually or determine dynamically using expression.
If expression, you can choose a container element which holds run time value.
Regarding the binding errors, you can generate the binding automatically.
Regards,
PR. -
Error in AEX Itegrated Configuration Testing "No receiver agreement found."
Hi,
I am working on PI 7.3, doing a File to Idoc by using the AEX(Advance Adapter Engine Extended). While doing the configuration testing i am getting the below error "
Problem occurred in receiver agreement for sender -BC_XXXXXXX to receiver -BS_XX5_100,urn:XXXX.com:POC:MasterData:Article:ECC:Sender.SI_OA_POC: No receiver agreement found for , BC_xxxxx, , BS_xx5_100, urn:xxxx.com:POC:MasterData:Article:ECC:Sender, SI_OA_POC."
I gone through the SDN but not got usefull links. I tryied to recreating whole scenario, Cache refresh, but no luck. Can you pls let me know where is the problem. Do i need to do any additional configuration other than creating RFC in Java stack for AEX?
Thanks & Regards,
DevHi RK,
Thanks for your reply.
Yes i have created the Idoc_AAE channel and assigned this channel in my Outbound Processing tab.
What do you mean by java channel in Inbound Processing? My sender is File so i created File channel and assigned in the Inbound processing tab.
@ Raghu,
I have created the Receiver channel. I no need to create Receiver agreement because i am using the ICO so if i give the Receiver and Inbound interface details that is enough. And one more thing i am doing testing in ID Test confiuration.
Thanks ,
Dev -
Integrated configuration (PI 7.1) throws error when do 'Test Configuration'
I am doing Proxy to Web Service (SOAP) sync scenario. We are using Integrated Configuration. After created integrated configuration and test this from (Tools --> Test Configuration) it throws the following error at the receiver agreement step.
Sender Agreement - Green
Receiver Determination - Green
Interface Determination - Green
Operation Mapping - Green
Receiver Agreement - Red.
Problem occurred in receiver agreement for sender -DR4400_D to receiver -ESRI,urn:AssetManagement.AddressManagementSearchCapabilitiesFromECC_Out: No standard agreement found for , DR4400_D, , ESRI, urn::AssetManagement, AddressManagementSearchCapabilitiesFromECC_OutTest Configuration cannot be used to test Integrated Configuration Scenario.....refer my reply here:
Re: Integrated Configuration in PI7.1
Regards,
Abhishek. -
Error : Receiver agreement not found
Hi all,
My scenario is RFC to JDBC.
Its showing the below error, when 'I try to send data through test configuration after configuring ESR and ID part.
Receiver Agreement
Runtime error
Problem occurred in receiver agreement for sender -SAP_BL_ISU to receiver -RFC_To_JDBC_Async_R_SQL_bllmstest,urn:sap-com:document:sap:rfc:functions.ZTEST_TIPS_DOI1: No standard agreement found for , SAP_BL_ISU, , RFC_To_JDBC_Async_R_SQL_bllmstest, urn:sap-com:document:sap:rfc:functions, ZTEST_TIPS_DOI1
<Trace level="1" type="B">CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV</Trace>
<Trace level="2" type="T">O U T B O U N D - B I N D I N G </Trace>
<Trace level="2" type="T"> Cache Content is up to date </Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for: </Trace>
<Trace level="2" type="T">-SAP_BL_ISU </Trace>
<Trace level="2" type="T">-RFC_To_JDBC_Async_R_SQL_bllmstest </Trace>
<Trace level="2" type="T">urn:sap-com:document:sap:rfc:functions.ZTEST_TIPS_DOI1 </Trace>
<Trace level="1" type="T">error with outbound binding. </Trace>
<Trace level="1" type="T">No standard agreement found for , SAP_BL_ISU, , RFC_To_JDBC_Async_R_SQL_bllmstest, urn:sap-com:document:sap:rfc:functions, ZTEST_TIPS_DOI1 </Trace> <Trace level="1" type="E">CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV</Trace>
please suggest me...Hi,
This is configuration issue, please check the ESR sender/Receiver interfaces and the associated
Sender / Receiver agreement and the associated communication channels are configured correctly.
Try to test the configuration using Test configuration / send a test message from RWB to this interface.
If the configuration is correct and you are facing the same issue. try to delete the ID configuration and recreate it.
Before re-creating the configuration, do cache refresh.
Regards
Bhargava Krishna -
Problems in IDOC receiver communication channel
Hi,
I am trying to build an interface to get data from 3rd party legacy system using JDBC and post the data into ECC using IDOCS. I have IDOC built in ECC, I am able to import the metadata in IDX2 after creating port in IDX1. But after building the whole interface, I dont see the IDOC receiver communication channel which has to post IDOCS in the ECC 6.0 system.
Please assist.
Rgds
KishoreOK in that case, we are getting the following error in the Message monitoring:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_ERROR</SAP:Code>
<SAP:P1>-BS_AVN_TO_FILE_JDBCSERVER</SAP:P1>
<SAP:P2>-BS_WOAV_IDOC_SENDER,urn:sap-com:document:sap:idoc:messages.ZAVENTITY01.ZENTITY</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>No standard agreement found for , BS_AVN_TO_FILE_JDBCSERVER, , BS_WOAV_IDOC_SENDER, urn:sap-com:document:sap:idoc:messages, ZAVENTITY01.ZENTITY</SAP:AdditionalText>
<SAP:Stack>Problem occurred in receiver agreement for sender -BS_AVN_TO_FILE_JDBCSERVER to receiver -BS_WOAV_IDOC_SENDER,urn:sap-com:document:sap:idoc:messages.ZAVENTITY01.ZENTITY: No standard agreement found for , BS_AVN_TO_FILE_JDBCSERVER, , BS_WOAV_IDOC_SENDER, urn:sap-com:document:sap:idoc:messages, ZAVENTITY01.ZENTITY</SAP:Stack
Please check and assist.
Rgds
Kishore -
Configuration Error in PI 7.1 Receiver Agreement
Hi,
I am facing a problem while testing my interface throught RWB, I am getting below error.
Error while sending message: com.sap.engine.interfaces.messaging.api.exception.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values:
I have checked the configuration in ID and its showing green. Also i have tried to re configure complete scenario but still facing same problem.
point will be rewarded for solution.Hi
Check the Configuration once again .
Check the Receiver Determination and Recever agreement .
Or Else . Test the ID using Test Configuration in tools.
Maybe you are looking for
-
How do I sync voicememo from IPhone to itune?
It works the first time..but I don't know what I did wrong. I was deleting something because it kept transfering the old voicememo from itune to my IPhone. Now it doesn't sync any voicememos recorded on my IPhone or even the old ones I have to Itune.
-
How can I get into the icloud photo album, it appears it has duplicated all my photos. My iphone and ipad now list all photos and videos twice, where and how can I go to clean that up? Thanks
-
Exchange rate should pick from TCURR based on custom date field added in MIGO
Hi, In MIGO, FI document get posted by picking exchange rate based on the posting date. Through BADI(MB_DOCUMENT_BADI) we have added a field called translation date in MIGO screen, while doing GRN exchange rate should pick from TCURR based on transla
-
How do I get charges taken off my cc when I didn't buy I tunes but it's charged on there
I Don't know how this happened i don't even use I tunes but it's right on my last 3 bills I called cc n they said get hold of I tunes
-
How to create a new menu item.. please help
hi every one.., i bought a new 30GB ipod .., i would like to create a new menu item in the ipod and wanna generate all my content whichis in my database to this newly created menu item in my ipod.... any reply to this will be greatly appreciated.. th