How to test the extended controller and AM Object

I added a button in a OAF page and extended the CO and AM. When we click this button, an XML Publisher concurrent program should be called and the PO will be displayed in PDF format.
What is the best way to test this. Should I copy all the libraries from oracle/apps/... to my pc and attach or can I test without doing this. If so, what is the best approach.
I am new to this.
Thanks for your Help.
HP

I got the code ready for with extended Co java file. How can test this. How to generate the class file. Once I gerenarate the class file, if I ftp the file to cust/oracle/apps/pos/changeorder/webui and in the personalization if I attach this CO and run the page and click the button will this call the new CO? Yes after FTP the Contorller class file to appropriate path and attach the extended controller through personalization New Controller will get called.
But DO REMEMBER TO BOUNCE THE APPACHE SERVER then only the extended Controller file get called.
here is the link having steps to bounce it for Apps 11i.
http://oracleanil.blogspot.com/2009/04/ncrimmessageproc.html
Please let me know if these steps are correct..
1. New OAWorkSpace
2. New Project
3. right click on project and click New class to generate the extended CO Class.Yes, It is right..
Thanks
--Anil
http://oracleanil.blogspot.com

Similar Messages

How to Test the individualmapping field and conditions...

Hi Frnds,
I done mapping from source to destination as per tech spec in my scenario based on some conditions
i used node functions also..
But my question is how to test the every mapping filed , condition is correct or not, what i used node function working properly or not...
Regards,
Raj

Hi
If you want to check mapping for individual mapping then in design go to test tab and put your data there and then come again on Design tab and click on any target field fro which you want to check mapping then right click on target field in mpping area and click on Display queue and check whether it is expected output for that particular field mapping.
Regards
Sami
Reward points if useful.

How to test the JSP pages and sevlets using JUnit. ?

How to test the JSP pages using JUnit. How to configure what are all the steps to execute the JUnit test cases.

Hi xiepei,
since you are using modbus, a simple error checking is implicit in the protocol and is the comparison between returned checksum and the calculated one on the received message: checksum errors, if any, are an effect of communications errors (you should have at least 2 bits changed and on particular patterns to have the checksum be calculated correctly!). You won't be able to calculate BER on them, but you can calculate PER (Packet Error Rate).
Another flag for communication errors, on the other direction, is to intercept error messages from the device: if it fully implements modbus protocol, it should return some warning in case of error (I seem to remember that in some cases it returns the reveived message with some error bits added: please check in modbus documentation).
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to test the communication stability and calculate ber using the CVI ?

Our chief engineer gave me a task yeasterday.He asked me to do software testing and calculate bit error rate that we would know our communication stability.
However,I have never touched this aspect of knowledge. I have known a bit about CVI and I want to write bit error rate code using CVI.Thus,I could test the communication stability.
But I don't know how to analyse and judge the receiving codes whether they are right or wrong.
We use Modbus communication protocol and receive data via serial port,so I want to save all datas and record the total datas number ,marking as M.
then,save the eligible datas and record the mumber marking as N. So, bit error rate is (M-N)/M .
Whether this is feasible ? Or you have any good idea. Thank you very much.
unsigned char in_data[100];
inqlen = GetInQLen (comport);
for(i=0;i<inqlen;i++)
in_data[i]=ComRdByte(comport);
Above is my code that receive all datas and I want to save the array in_data[] data and record the number.
switch(inqlen)
case 19:
crc=usMBCRC16(in_data,inqlen );
if((in_data[1] == 0x03)&&(crc==0)&&(in_data[0]==device_addr))
Above is the condition judgement that receive eligible datas which number marks as N.
I know there is a precondition that I filter out all the wrong data . However ,I don't know any good idea. I will appreciate if anyone could help me.
Thank you very much.
Best regards.
xiepei
I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.
Solved!
Go to Solution.

Hi xiepei,
since you are using modbus, a simple error checking is implicit in the protocol and is the comparison between returned checksum and the calculated one on the received message: checksum errors, if any, are an effect of communications errors (you should have at least 2 bits changed and on particular patterns to have the checksum be calculated correctly!). You won't be able to calculate BER on them, but you can calculate PER (Packet Error Rate).
Another flag for communication errors, on the other direction, is to intercept error messages from the device: if it fully implements modbus protocol, it should return some warning in case of error (I seem to remember that in some cases it returns the reveived message with some error bits added: please check in modbus documentation).
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to test the data

Hi,,
The below test data is for SD report which do the monthly batch transfer from Annexure to F-form
Can you please help me how to test the data? and prepare the unit test case.
1. Intra-plant movement of inventory between two plants with the same region Code - In India there are two plants in the state of Maharashtra.
Plant 8600 (Vendor 10999346) -> Plant 8601 - MM# 1003623 / 1013515 / 5214135 / 8788143
NB PO# 6500002231 / ZU PO 4600000500
2. Intra-plant movement of inventory from Plant 8650 - Goa to one Depot Plant
Plant 8613 (Vendor 10999359) -> Plant 8618 - MM# 1003623 / 1013515 / 5214135 / 8788143
NB PO# 6500002232 / ZU PO 4600000501
3. Intra-plant movement of inventory between two Parts plants.
Plant 8650 (Vendor 10999344) -> Plant 8601 - MM# 4908281 / 4908323 / 4908968 / 4922001
NB PO# 6500002233 / ZU PO 4600000502

Please go thorugh this ...
eCATT stands for extended Computer Aided Test Tool (eCATT) which is built is testing tool to test SAP system. By using testing tool we can test the entire business process, and we can also use this tool with a third party testing tool (I am not covering this topic). Execution of every test script ends with a log, which explains the results of the test script.
By using eCATT we can do following operations,
·        Test transactions, reports, and scenarios
·        Call BAPIs and function modules
·        Test remote systems
·        Check authorizations (user profiles)
·        Test updates (database, applications, GUI)
·        Test the effect of changes to customizing settings
·        Check system messages
For more information go to: eCATT::Extended Computer Aided Test Tool (sdn.com)
Here I am discussing fundamentals about eCATT in detail. You can find very good documentation in sdn.com.
To develop a test script in eCATT we need to follow the following steps,
1. Creating Test Scripts.
2. Creating Test Data Containers[16] .
3. Understanding System Data Containers[17] .
4. Executing Test Configurations.
There is a very good web blog on eCATT in sdn.com which explains eCATT with necessary screen shots. To read document click here Blog on eCATT in sdn.com
For details and the screenshots     please see the link
http://www.erpgenie.com/sap/ecatt/
Reward points if it is usefull ...
Girish

Call the CALL METHOD and CREATE OBJECT

Hi Friends,
How to call the CALL METHOD and CALL OBJECT in the se38 edit program.For example for calling the FUNCTION MODULE we can use the pattern in that using the call function we can get the function module in the se38 edit.but in METHOD hoe to call if you explain me in detail it would be very much usefulfor me.
Thanks,
Regards,
Rajendra Kumar

Hi rajendra,
its the same way we do. call pattern ..there will be another radiobutton whcich says 'ABAP objects' , give the method name and the class name there.. this will call the method similar to function module..
we can also write our own classes and methods...
say..you created your own class c1 and method m1
then first create the instance of the object..
data:obj1 type ref to c1.
create object obj1.
call method obj1->m1.
Regards,
Vidya.

How to handle the extended vo in the extended controller

Hi,
I want to know how to handle the extended vo attributes in the extended controller.
I extended CompetenceElementsVO as 'CompetenceElementsEx' with 2 transient attributes called col1 and col2.
Here i want to pass value according based on some condition. for this i want to know how to handle these attributes.
I tried by using the extended vo name in the controller, if i use means then it is throwing error after the extended controller is implemented.
Same time if i try to refer this attributes from the original vo definition, jdev itself showing error.
please tell me how to handle this?
Thanks in advance,
SAN

Hi San,
You have to extend the controller where your region is associated with,
And in that controller you get the AM(if there is more than one AM and your VO is associated with a child AM, first you have to get your required AM) and then
get the ViewObject(standard).
Then you should be able to get your newly added attributes.
Please find the below sample code to get the AM handle and VO from there, update the code according to your requirement,
     Get all the VOs under the Root AM
     writeLog(pageContext, "Room AM"+ pageContext.getRootApplicationModule());
String[] rootViewNames = pageContext.getRootApplicationModule().getViewObjectNames();
/* writeLog(pageContext," Length of the VOs from Rootm AM "+rootViewNames.length);
for (int j =0 ;j<rootViewNames.length ;j++ )
writeLog(pageContext,j +" Value "+rootViewNames[j]);
     // Get requested AM from Root am
public OAApplicationModule getRequestedAM(OAPageContext pageContext, String requestedAMName)
writeLog(pageContext,"Requested AM called to check the AM "+requestedAMName );
String amName = "";
String objectivesAMName = requestedAMName;//"ObjectivesAM";
String nestedAMArray[] = pageContext.getRootApplicationModule().getApplicationModuleNames();
pageContext.writeDiagnostics(this,"Root AM=>"+pageContext.getRootApplicationModule().getName() + " Child AMs=>"+ nestedAMArray.length,1);
OAApplicationModule currentAM = null;
currentAM = (OAApplicationModule)pageContext.getRootApplicationModule();
for(int i = 0; i < nestedAMArray.length; i++)
amName = nestedAMArray;
pageContext.writeDiagnostics(this,"Nested AM Name=>"+amName + "and amName.indexOf(objectivesAMName) "+amName.indexOf(objectivesAMName),1);
currentAM = (OAApplicationModule)pageContext.getRootApplicationModule().findApplicationModule(amName);
                    //Get the view names
               String[] viewNames = currentAM.getViewObjectNames();
for (int i =0 ;i<viewNames.length ;i++ )
writeLog(pageContext,i +" Value "+viewNames[i]);
if(!(amName.indexOf(objectivesAMName)==-1))
pageContext.writeDiagnostics(this,"Found Handle to My Nested AM " + amName ,1);
break;
return currentAM;
Get the VO from the AM
OAViewObject objAssessmentVO = (OAViewObject)yourAM.findViewObject("yourVO");
Thanks.
With Regards,
Kali.
OSSi.

How to get the .class file for the extended Controller .java file

Hi,
I did the below steps.
1. Created New OAWorkspace
2. Created New project
3. Imported the page .xml file
4. Added new .java file by extending the controller class
5. Added code in the .java file.
6. Ran the .xml file
As I copied all the folders from Unix box, the page was opened.
But My question was where can I see the .class file the extended controller. It's a .java file. How to compile and get the .class file for this .java file. If I get this .class file, I can go to the page and click the personlize page. and change the Controller name to the new path by ftp ing the new class to the cust.oracle.apps.pos.changeorder.webiui.
Please let me know how to create the .class file.
Thanks,
HP

All are Java files are stored in JDEV_INSTALL_DIR:\jdevhome\jdev\myprojects\
In your case the path java would be
JDEV_INSTALL_DIR:\jdevhome\jdev\ myprojects \cust\oracle\apps\pos\changeorder\webui\
AND
Once you compile the java file in Jdeveloper, Class files get generated @ below path
In your case the path of class would be
JDEV_INSTALL_DIR:\jdevhome\jdev\ myclasses \cust\oracle\apps\pos\changeorder\webui\
Duplicate Thread-
Thanks
--Anil
http://oracleanil.blogspot.com/

How to test the connection between DSD backend and DSD connector

Dear all,
I am configuring the MDSD scenario .. and i want to insure that my customization is correct
How to test the connection between DSD Backend and DSD connector ??

Hi Viren,
The problem is:
We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
Thanks,
RPK.

How to test the SAP modules like SD and MM By using Quality Center and QTP

Hi Experts,
How to test the SAP modules like SD and MM By using Quality Center and QTP. Can you please provide the documentation regarding this.
Regards,
Skumar.

Hi Sampath,
First install QTP and SAP Addin with in QTP.
2nd use QC to develop the test plan and then convert that test plan design to Test Scripts (QTP vesrion using settings)
3rd record the R/3 GUI screen of SAP for SD, MM like Create order or Create PR.
Once recording is done QTP will create a script in VB
SAPGuiSession("Session").SAPGuiWindow("SAP Easy Access - User").SAPGuiOKCode("OKCode").Set "/nVA01"
SAPGuiSession("Session").SAPGuiWindow("SAP Easy Access - User").SendKey ENTER
you can always add a parameter and other customization according to your requirement.
Let me know if you need more information regarding this.
Good Luck!

How to program a midi foot controller on Mainstage? Does anyone knows how to program the foot controller with exclusive solo channel in order not to dance "tip tap" while from clean guitar I go to crunch or solo? How to do this programming on Mainstage?

How to program a midi foot controller on Mainstage? Does anyone knows how to program the foot controller with exclusive solo channel in order not to dance "tip tap" while from clean guitar I go to crunch or solo? How to do this programming on Mainstage?
I basically managed to learn how to invert parameters which allows me to be as default in the clean guitar channel and if I switch the first button on the midi foot controller I switch to crunch, but at this point I tryied so hard to programm the second and third button to switch, only through a button in one step, to a third channel for distorsion or a 4th channel for solo guitar but I couldn't figured out how this work can be done!
I would appreciate if anyone could help or share this experience with others who are experiencing the same problem.
Cheers.
F.

I cannot seem to get mainstage to recognize my FCB either. I am using IFCB. Anyone figure this out?
Thanks,
Eric

On my canon powershot A3300IS the lense is stuck in the extended position and will not close

I have a canon powershot A3300 IS the lense is stuck in the extended position and will not close. How can I fix this myself?

Forneypamela,
Please remove the battery from the camera for a few minutes. Then, put the battery back in the camera and power it on again. If the lens is still stuck in the extended position, the camera is going to need service. I apologize for any inconvenience this may cause.
To start your repair process, you'll need to complete a Repair Request on our website.
If the camera is more than a year old, you may participate in the Canon Loyalty Program instead. The Canon Loyalty Program option allows you to replace your current camera for a discounted fee, plus shipping. The unit offered through this program carries a 90 day warranty. The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.
If you would like to take part in this option, please call our Sales Department at (800) OK CANON (800-652-2666) seven days a week, 8am to Midnight. Let them know you have been working with online support and the Canon Loyalty Program was offered. Be sure to have your serial number for your camera at the time of your call.
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to test the payload in XI

Hi all,
could please explain how to test the payload in xi and with steps.
Thanks in advance,
Radhika

Hi Radhika,
You can test in three ways.
1.) In message mapping directly give the relevant data and then execute. Here you can test whether the mapping is correct or not.
2.) In Integrstion Directory after completing and activating the Configuration, in tool you can find the Test Configuration tab. There you can give the sender and receiver details along with payload. Here you can test whether the Configuration is correct or not.
3.) In RWB in COmponent monitoring. Select the Integration Engine Monitoring. Here give the sender and receiver details, Interface name, name space, Quality of service.
Now give user name and pass word.
Paste the payload from massage mapping and then press test tab. Here yoyu can directly send the message from XI server to the receiver system.
Ok,
Jeevan

How to test the rule if multiline container is passing to the task?

Hi Experts,
                  I am working on leave workflow. I have to get the approvers based on no of days of leave and leave type. I am getting these details in ITEMS_TAB internal table. I am passing this table to a rule. Now my problem is when I tried to simulate the rule I am not getting any input screen to enter the data.
ITEMS_TAB is an internal table type of   "PTREQ_ITEMS_WF_TAB_FLAT".
In the rule I have created a container by selecting the radiobutton "ABAP Dict. Data Type" and entered the above reference parameter is it right way?
Is it possible to test the rule independently if I use multiline container as import parameter in my rule? If so can anybody please tell me how to test the rule?
Thank You.
Srija.

Hi Pavan,
                 Thank you.
                 To copy the values I am not getting any input screen to input the values. I observed one thing that the type that I am referring in the Rule is a deep structure. Is this is the reason that I am not getting the input screen to enter the values?
I tested by creating aother rule by taking a field for that rule I am getting the input screen to simulate the Rule.
Can you please suggest if the rule will not work then what I have to do? without the rule how can I get the agents?
Thank you.
Srija

How to test the PMS/apprisal template

Hi experts,
We have completed the configuration of Apprisal templete.
With OOHAP_BASIC,PHAP_CATALOG_PA we have completed the process along with status and substatus,staus flow.
I struckup at this juncture.
How to test the entire process after the configuration.
Please advice.
Regards,
Sairam.

Hi Sairam,
To test the PMS process, please follow the below steps :
1. Go to PHAP_CREATE_PA and select your template. Enter the details for appraisee, appraiser, reviewer ( if applicable ) and also the start date and end date. Save the document.
2. Go to PHAP_ADMIN_PA and select the template/appraisee id in the appraisee column in the selection screen and execute. Select your appraisal document and then select from Menu- Appraisal Document->Change Status and select your initial status and sub status.
Now you can login to Portal/R3 with the user and start testing. The substatus will move automatically based on your workflow. Once you complete a particular status say 'In Planning' you need to manually change the status again from PHAP_ADMIN_PA to 'In Review'.
Get back to me in case of any queries.
Regards,
Sachin

How to test the extended controller and AM Object

Similar Messages

Maybe you are looking for